We study the implementation of quantum key distribution (QKD) systems over quantum repeater infrastructures. We particularly consider quantum repeaters with encoding and compare them with probabilistic quantum repeaters. To that end, we propose two decoder structures for encoded repeaters that not only improve system performance but also make the implementation aspects easier by removing two-qubit gates from the QKD decoder. By developing several scalable numerical and analytical techniques, we then identify the resilience of the setup to various sources of error in gates, measurement modules, and initialization of the setup. We apply our techniques to three- and five-qubit repetition codes and obtain the normalized secret key generation rate per memory per second for encoded and probabilistic quantum repeaters. We quantify the regimes of operation, where one class of repeater outperforms the other, and find that there are feasible regimes of operation where encoded repeaters -- based on simple three-qubit repetition codes -- could offer practical advantages.
We propose a new approach to implement quantum repeaters for long distance quantum communication. Our protocol generates a backbone of encoded Bell pairs and uses the procedure of classical error correction during simultaneous entanglement connection. We illustrate that the repeater protocol with simple Calderbank-Shor-Steane (CSS) encoding can significantly extend the communication distance, while still maintaining a fast key generation rate.
We present an encoded hybrid quantum repeater scheme using qubit-repetition and Calderbank-Shor-Steane codes. For the case of repetition codes, we propose an explicit implementation of the quantum error-correction protocol. Moreover, we analyze the entangled-pair distribution rate for the hybrid quantum repeater with encoding and we clearly identify a triple trade-off between the efficiency of the codes, the memory decoherence time, and the local gate errors. Finally, we show that in the presence of reasonable imperfections our system can achieve rates of roughly 24 Hz per memory for 20 km rep…
Losses of optical signals scale exponentially with the distance. Quantum repeaters are devices that tackle these losses in quantum communication by splitting the total distance into shorter parts. Today two types of quantum repeaters are subject of research in the field of quantum information: Those that use two-way communication and those that only use one-way communication. Here we explain the details of the performance analysis for repeaters of the second type. Furthermore we compare the two different schemes. Finally we show how the performance analysis generalizes to large-scale quantum n…
We investigate secret key rates for the quantum repeater using encoding [L. Jiang et al., Phys. Rev. A 79, 032325 (2009)] and compare them to the standard repeater scheme by Briegel, Dür, Cirac, and Zoller. The former scheme has the advantage of a minimal consumption of classical communication. We analyze the trade-off in the secret key rate between the communication time and the required resources. For this purpose, we introduce an error model for the repeater using encoding which allows for input Bell states with a fidelity smaller than one, in contrast to the model given in [L. Jiang et al.…
We investigate quantum repeater protocols that rely on three-qubit repetition codes using nitrogen-vacancy (NV) centers in diamond as quantum memories. NV centers offer a two-qubit register, corresponding to their electron and nuclear spins, which makes it possible to perform deterministic two-qubit operations within one NV center. For quantum repeater applications, we, however, need to do joint operations on two separate NV centers. Here, we study two NV-center based repeater structures that enable such deterministic joint operations. One structure offers less consumption of classical communi…
We propose a post-selection technique, based on quantum error detection, for quantum key distribution (QKD) systems that run over quantum repeaters with encoding. In such repeaters, quantum error correction techniques are used for entanglement distillation. By developing an analytical approach to study such quantum repeaters, we show that, in the context of QKD, it is often more efficient to use the error detection, rather than the error correction, capability of the underlying code to sift out cases where an error has been detected. We implement our technique for three-qubit repetition codes …
Quantum repeaters are used to overcome the exponential photon loss scaling that quantum states acquire as they are transmitted over long distances. While repeaters for discrete variable encodings of quantum information have existed for some time, novel approaches for continuous variable encoding quantum repeaters have only recently been proposed. In this work, we present a method of using a discrete variable repeater protocol to distribute continuous variable states and utilize it to compare the rates of continuous variable entanglement distribution between first generation continuous and disc…
Quantum repeaters provide an efficient solution to distribute Bell pairs over arbitrarily long distances. While scalable architectures are demanding regarding the number of qubits that need to be controlled, here we present a quantum repeater scheme aiming to extend the range of present day quantum communications that could be implemented in the near future with trapped ions in cavities. We focus on an architecture where ion-photon entangled states are created locally and subsequently processed with linear optics to create elementary links of ion-ion entangled states. These links are then used…
By encoding logical qubits into specific types of photonic graph states, one can realize quantum repeaters that enable fast entanglement distribution rates approaching classical communication. However, the generation of these photonic graph states requires a formidable resource overhead using traditional approaches based on linear optics. Overcoming this challenge, a number of new schemes have been proposed that employ quantum emitters to deterministically generate photonic graph states. Although these schemes have the potential to significantly reduce the resource cost, a systematic compariso…
In quantum repeater protocols, measurements are performed in multiple relay points. Classical communications are used to convey the measurement results. It is important to improve the way of conveying the measurement results so that EPR pairs are not affected by noises during classical communications. One solution is execution in the blind mode. In the blind mode, correction operations of multiple ES operations and multiple EPP operations are performed in a lump after EPR pairs are shared between the sender and the receiver. That is, the following quantum operations are performed without perfo…
We present a linear optical scheme for error-free distribution of two-photon polarization entangled Bell states over noisy channels. The scheme can be applied to an elementary quantum repeater protocol with potentially significant improvements in efficiency and system complexity. The scheme is based on the use of polarization and time-bin encoding of photons and can perform single-pair, single-step purification with currently available technology.
Quantum optical states are fragile and can become corrupted when passed through a lossy communication channel. Unlike for classical signals, optical amplifiers cannot be used to recover quantum signals. Quantum repeaters have been proposed as a way of reducing errors and hence increasing the range of quantum communications. Current protocols target specific discrete encodings, for example quantum bits encoded on the polarization of single photons. We introduce a more general approach that can reduce the effect of loss on any quantum optical encoding, including those based on continuous variabl…
We show that quantum Reed-Solomon codes constructed from classical Reed-Solomon codes can approach the capacity on the quantum erasure channel of $d$-level systems for large dimension $d$. We study the performance of one-way quantum repeaters with these codes and obtain a significant improvement in key generation rate compared to previously investigated encoding schemes with quantum parity codes and quantum polynomial codes. We also compare the three generation of quantum repeaters using quantum Reed-Solomon codes and identify parameter regimes where each generation performs the best.
A potential quantum internet would open up the possibility of realizing numerous new applications, including provably secure communication. Since losses of photons limit long-distance, direct quantum communication and widespread quantum networks, quantum repeaters are needed. The so-called PLOB-repeaterless bound [Pirandola et al., Nat. Commun. 8, 15043 (2017)] is a fundamental limit on the quantum capacity of direct quantum communication. Here, we analytically derive the quantum-repeater gain for error-corrected, one-way quantum repeaters based on higher-dimensional qudits for two different p…
We propose to use a collective excitation blockade mechanism to identify errors that occur due to disturbances of single atoms in ensemble quantum registers where qubits are stored in the collective population of different internal atomic states. A simple error correction procedure and a simple decoherence-free encoding of ensemble qubits in the hyperfine states of alkali atoms are presented.
All-photonic quantum repeater is not yet commercially applicable due to difficulty in the generation of repeater graph states (RGS) and the probabilistic nature of Bell-state measurement. In recent years, several deterministic protocols have been proposed to generate RGS. However, they can only create bare RGS and a rate-distance analysis for the deterministic approach is currently missing. We present a deterministic generation scheme of encoded RGS and show that after optimization, the repeater using our scheme performs at least 4.9 times better than the traditional probabilistic generation s…
We propose an architecture of quantum-error-correction-based quantum repeaters that combines techniques used in discrete- and continuous-variable quantum information. Specifically, we propose to encode the transmitted qubits in a concatenated code consisting of two levels. On the first level we use a continuous-variable GKP code encoding the qubit in a single bosonic mode. On the second level we use a small discrete-variable code. Such an architecture has two important features. Firstly, errors on each of the two levels are corrected in repeaters of two different types. This enables for achiev…
Communication over a quantum broadcast channel with cooperation between the receivers is considered. The first form of cooperation addressed is classical conferencing, where Receiver 1 can send classical messages to Receiver 2. Another cooperation setting involves quantum conferencing, where Receiver 1 can teleport a quantum state to Receiver 2. When Receiver 1 is not required to recover information and its sole purpose is to help the transmission to Receiver 2, the model reduces to the quantum primitive relay channel. The quantum conferencing setting is intimately related to quantum repeaters…
We propose a novel one-way quantum repeater architecture based on photonic tree-cluster states. Encoding a qubit in a photonic tree-cluster protects the information from transmission loss and enables long-range quantum communication through a chain of repeater stations. As opposed to conventional approaches that are limited by the two-way communication time, the overall transmission rate of the current quantum repeater protocol is determined by the local processing time enabling very high communication rates. We further show that such a repeater can be constructed with as little as two station…
We propose a scheme for realizing quantum repeaters with Rydberg-blockade coupled atomic ensembles, based on a recently proposed collective encoding strategy. Rydberg-blockade mediated two-qubit gates and efficient cooperative photon emission are employed to create ensemble-photon entanglement. Thanks to deterministic entanglement swapping operations via Rydberg-based two-qubit gates, and to the suppression of multi-excitation errors by the blockade effect, the entanglement distribution rate of the present scheme is higher by orders of magnitude than the rates achieved by other ensemble-based …
Quantum repeaters are indispensable for high-rate, long-distance quantum communications. The vision of a future quantum internet strongly hinges on realizing quantum repeaters in practice. Numerous repeaters have been proposed for discrete-variable (DV) single-photon-based quantum communications. Continuous variable (CV) encodings over the quadrature degrees of freedom of the electromagnetic field mode offer an attractive alternative. For example, CV transmission systems are easier to integrate with existing optical telecom systems compared to their DV counterparts. Yet, repeaters for CV have …
We propose a heralded quantum repeater protocol based on the general interface between the circularly polarized photon and the quantum dot embedded in a double-sided optical microcavity. Our effective time-bin encoding on photons results in the deterministic faithful entanglement distribution with one optical fiber for the transmission of each photon in our protocol, not two or more. Our efficient parity-check detector implemented with only one input-output process of a single photon as a result of cavity quantum electrodynamics makes the entanglement channel extension and entanglement purific…
Twin-field (TF) quantum key distribution (QKD) fundamentally alters the rate-distance relationship of QKD, offering the scaling of a single-node quantum repeater. Although recent experiments have demonstrated the new opportunities for secure long-distance communications allowed by TF-QKD, formidable challenges remain to unlock its true potential. Previous demonstrations have required intense stabilisation signals at the same wavelength as the quantum signals, thereby unavoidably generating Rayleigh scattering noise that limits the distance and bit rate. Here, we introduce a novel dual-band sta…
In order for quantum communications systems to become widely used, it will probably be necessary to develop quantum repeaters that can extend the range of quantum key distribution systems and correct for errors in the transmission of quantum information. Quantum logic gates based on linear optical techniques appear to be a promising approach for the development of quantum repeaters, and they may have applications in quantum computing as well. Here we describe the basic principles of logic gates based on linear optics, along with the results from several experimental demonstrations of devices o…
Quantum repeaters are a promising platform for realizing long-distance quantum communication and thus could form the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. Repeater protocols that encode information in single- or multi-photon states are limited by transmission losses and the cost of implementing entangling gates or Bell measurements. In this work, we consider implementing a quantum repeater protocol using Gottesman-Kitaev-Preskill (GKP) qubits. These qubits are natural elements for quantum repeater protocols, because they allow for…
Silicon-based polarization-encoding quantum key distribution (QKD) has been widely studied, owing to its low cost and robustness. However, prior studies have utilized off-chip devices to demodulate the quantum states or perform polarization compensation, given the difficulty of fabricating polarized independent components on the chip. In this paper, we propose a fully chip-based decoder for polarization-encoding QKD. The chip realizes a polarization state analyzer and compensates for the BB84 protocol without requiring additional hardware. It is based on a polarization-to-path conversion metho…
We introduce a protocol to distribute entanglement between remote parties. Our protocol is based on a chain of repeater stations, and exploits topological encoding to tolerate very high levels of defects and errors. The repeater stations may employ probabilistic entanglement operations which usually fail; ours is the first protocol to explicitly allow for technologies of this kind. Given an error rate between stations in excess of 10%, arbitrarily long range high fidelity entanglement distribution is possible even if the heralded failure rate within the stations is as high as 99%, providing th…
Isometry operations encode the quantum information of the input system to a larger output system, while the corresponding decoding operation would be an inverse operation of the encoding isometry operation. Given an encoding operation as a black box from a $d$-dimensional system to a $D$-dimensional system, we propose a universal protocol for isometry inversion that constructs a decoder from multiple calls of the encoding operation. This is a probabilistic but exact protocol whose success probability is independent of $D$. For a qubit ($d=2$) encoded in $n$ qubits, our protocol achieves an exp…
Hierarchical Generation and Design of Tree-Codes for Resource-Efficient Loss-Tolerant Quantum Communications
University of Trieste（的里雅斯特大学）；Istituto Nazionale di Fisica Nucleare, Trieste Section（意大利国家核物理研究所的里雅斯特分部）；Institute for Quantum Optics and Quantum Information of the Austrian Academy of Sciences（奥地利科学院量子光学与量子信息研究所）；Institute for Theoretical Physics, University of Innsbruck（因斯布鲁克大学理论物理研究所）
Quantum key distribution is a way to distribute secret keys to distant users with information theoretic security and key rates suitable for real-world applications. Its rate-distance figure, however, is limited by the natural loss of the communication channel and can never surpass a theoretical limit known as point-to-point secret key capacity. Recently, a new type of quantum key distribution with an intermediate relay was proposed to overcome this limit (M. Lucamarini, Z. L. Yuan, J. F. Dynes and A. J. Shields, Nature, 2018). However, a standard application of the decoy state method limited t…
Encoding schemes and error-correcting codes are widely used in information technology to improve the reliability of data transmission over real-world communication channels. Quantum information protocols can further enhance the performance in data transmission by encoding a message in quantum states, however, most proposals to date have focused on the regime of a large number of uses of the noisy channel, which is unfeasible with current quantum technology. We experimentally demonstrate quantum enhanced communication over an amplitude damping noisy channel with only two uses of the channel per…
Simpler encoding and decoding networks are necessary for more reliable quantum error correcting codes (QECCs). The simplification of the encoder-decoder circuit for a perfect five-qubit QECC can be derived analytically if the QECC is converted from its equivalent one-way entanglement purification protocol (1-EPP). In this work, the analytical method to simplify the encoder-decoder circuit is introduced and a circuit that is as simple as the existent simplest circuits is presented as an example. The encoder-decoder circuit presented here involves nine single- and two-qubit unitary operations, o…
As in conventional computing, key attributes of quantum memories are high storage density and, crucially, random access, or the ability to read from or write to an arbitrarily chosen register. However, achieving such random access with quantum memories in a dense, hardware-efficient manner remains a challenge, for example requiring dedicated cavities per qubit or pulsed field gradients. Here we introduce a protocol using chirped pulses to encode qubits within an ensemble of quantum two-level systems, offering both random access and naturally supporting dynamical decoupling to enhance the memor…
Society relies and depends increasingly on information exchange and communication. In the quantum world, security and privacy is a built-in feature for information processing. The essential ingredient for exploiting these quantum advantages is the resource of entanglement, which can be shared between two or more parties. The distribution of entanglement over large distances constitutes a key challenge for current research and development. Due to losses of the transmitted quantum particles, which typically scale exponentially with the distance, intermediate quantum repeater stations are needed.…
Quantum key distribution (QKD) is gradually moving towards network applications. It is important to improve the performance of QKD systems such as photonic integration for compact systems, the stability resistant to environmental disturbances, high key rate, and high efficiency in QKD applications. In the letter, we propose a general quantum decoding model, namely orthogonal-polarizations-exchange reflector Michelson interferometer model, to solve quantum channel disturbance caused by environment. Based on the model, we give a quantum phase decoder scheme, i.e. a Sagnac configuration based ort…
When photons are sent through a fiber as part of a quantum communication protocol, the error that is most difficult to correct is photon loss. Here, we propose and analyze a two-to-four qubit encoding scheme, which can recover the loss of one qubit in the transmission. This device acts as a repeater when it is placed in series to cover a distance larger than the attenuation length of the fiber, and it acts as an optical quantum memory when it is inserted in a fiber loop. We call this dual-purpose device a ``quantum transponder.''
We report the results of the implementation of a quantum key distribution (QKD) network using standard fibre communication lines in Moscow. The developed QKD network is based on the paradigm of trusted repeaters and allows a common secret key to be generated between users via an intermediate trusted node. The main feature of the network is the integration of the setups using two types of encoding, i.e. polarisation encoding and phase encoding. One of the possible applications of the developed QKD network is the continuous key renewal in existing symmetric encryption devices with a key refresh …
The continuous quadratures of a single mode of the light field present a promising avenue to encode quantum information. By virtue of the infinite dimensionality of the associated Hilbert space, quantum states of these continuous variables (CV) can enable higher communication rates compared to single photon-based qubit encodings. Quantum repeater protocols that are essential to extend the range of quantum communications at enhanced rates over direct transmission have also been recently proposed for CV quantum encodings. Here we present a quantum repeating switch for CV quantum encodings that c…
We introduce a ternary quantum key distribution (QKD) protocol and asymptotic security proof based on three coherent states and homodyne detection. Previous work had considered the binary case of two coherent states and here we nontrivially extend this to three. Our motivation is to leverage the practical benefits of both discrete and continuous (Gaussian) encoding schemes creating a best-of-both-worlds approach; namely, the postprocessing of discrete encodings and the hardware benefits of continuous ones. We present a thorough and detailed security proof in the limit of infinite signal states…
