We propose a post-selection technique, based on quantum error detection, for quantum key distribution (QKD) systems that run over quantum repeaters with encoding. In such repeaters, quantum error correction techniques are used for entanglement distillation. By developing an analytical approach to study such quantum repeaters, we show that, in the context of QKD, it is often more efficient to use the error detection, rather than the error correction, capability of the underlying code to sift out cases where an error has been detected. We implement our technique for three-qubit repetition codes by modelling different sources of error in crucial components of the system. We then investigate in detail the impact of such imperfections on the secret key generation rate of the QKD system, and how one can use the information obtained during entanglement swapping and decoding stages to maximize the rate. For benchmarking purposes, we specify the maximum allowed error rates in different components of the setup below which positive key rates can be obtained.
We propose a new approach to implement quantum repeaters for long distance quantum communication. Our protocol generates a backbone of encoded Bell pairs and uses the procedure of classical error correction during simultaneous entanglement connection. We illustrate that the repeater protocol with simple Calderbank-Shor-Steane (CSS) encoding can significantly extend the communication distance, while still maintaining a fast key generation rate.
We study the implementation of quantum key distribution (QKD) systems over quantum repeater infrastructures. We particularly consider quantum repeaters with encoding and compare them with probabilistic quantum repeaters. To that end, we propose two decoder structures for encoded repeaters that not only improve system performance but also make the implementation aspects easier by removing two-qubit gates from the QKD decoder. By developing several scalable numerical and analytical techniques, we then identify the resilience of the setup to various sources of error in gates, measurement modules,…
We present an encoded hybrid quantum repeater scheme using qubit-repetition and Calderbank-Shor-Steane codes. For the case of repetition codes, we propose an explicit implementation of the quantum error-correction protocol. Moreover, we analyze the entangled-pair distribution rate for the hybrid quantum repeater with encoding and we clearly identify a triple trade-off between the efficiency of the codes, the memory decoherence time, and the local gate errors. Finally, we show that in the presence of reasonable imperfections our system can achieve rates of roughly 24 Hz per memory for 20 km rep…
Losses of optical signals scale exponentially with the distance. Quantum repeaters are devices that tackle these losses in quantum communication by splitting the total distance into shorter parts. Today two types of quantum repeaters are subject of research in the field of quantum information: Those that use two-way communication and those that only use one-way communication. Here we explain the details of the performance analysis for repeaters of the second type. Furthermore we compare the two different schemes. Finally we show how the performance analysis generalizes to large-scale quantum n…
We investigate secret key rates for the quantum repeater using encoding [L. Jiang et al., Phys. Rev. A 79, 032325 (2009)] and compare them to the standard repeater scheme by Briegel, Dür, Cirac, and Zoller. The former scheme has the advantage of a minimal consumption of classical communication. We analyze the trade-off in the secret key rate between the communication time and the required resources. For this purpose, we introduce an error model for the repeater using encoding which allows for input Bell states with a fidelity smaller than one, in contrast to the model given in [L. Jiang et al.…
We investigate quantum repeater protocols that rely on three-qubit repetition codes using nitrogen-vacancy (NV) centers in diamond as quantum memories. NV centers offer a two-qubit register, corresponding to their electron and nuclear spins, which makes it possible to perform deterministic two-qubit operations within one NV center. For quantum repeater applications, we, however, need to do joint operations on two separate NV centers. Here, we study two NV-center based repeater structures that enable such deterministic joint operations. One structure offers less consumption of classical communi…
Quantum repeaters are used to overcome the exponential photon loss scaling that quantum states acquire as they are transmitted over long distances. While repeaters for discrete variable encodings of quantum information have existed for some time, novel approaches for continuous variable encoding quantum repeaters have only recently been proposed. In this work, we present a method of using a discrete variable repeater protocol to distribute continuous variable states and utilize it to compare the rates of continuous variable entanglement distribution between first generation continuous and disc…
Quantum repeaters provide an efficient solution to distribute Bell pairs over arbitrarily long distances. While scalable architectures are demanding regarding the number of qubits that need to be controlled, here we present a quantum repeater scheme aiming to extend the range of present day quantum communications that could be implemented in the near future with trapped ions in cavities. We focus on an architecture where ion-photon entangled states are created locally and subsequently processed with linear optics to create elementary links of ion-ion entangled states. These links are then used…
By encoding logical qubits into specific types of photonic graph states, one can realize quantum repeaters that enable fast entanglement distribution rates approaching classical communication. However, the generation of these photonic graph states requires a formidable resource overhead using traditional approaches based on linear optics. Overcoming this challenge, a number of new schemes have been proposed that employ quantum emitters to deterministically generate photonic graph states. Although these schemes have the potential to significantly reduce the resource cost, a systematic compariso…
In quantum repeater protocols, measurements are performed in multiple relay points. Classical communications are used to convey the measurement results. It is important to improve the way of conveying the measurement results so that EPR pairs are not affected by noises during classical communications. One solution is execution in the blind mode. In the blind mode, correction operations of multiple ES operations and multiple EPP operations are performed in a lump after EPR pairs are shared between the sender and the receiver. That is, the following quantum operations are performed without perfo…
We present a linear optical scheme for error-free distribution of two-photon polarization entangled Bell states over noisy channels. The scheme can be applied to an elementary quantum repeater protocol with potentially significant improvements in efficiency and system complexity. The scheme is based on the use of polarization and time-bin encoding of photons and can perform single-pair, single-step purification with currently available technology.
Quantum optical states are fragile and can become corrupted when passed through a lossy communication channel. Unlike for classical signals, optical amplifiers cannot be used to recover quantum signals. Quantum repeaters have been proposed as a way of reducing errors and hence increasing the range of quantum communications. Current protocols target specific discrete encodings, for example quantum bits encoded on the polarization of single photons. We introduce a more general approach that can reduce the effect of loss on any quantum optical encoding, including those based on continuous variabl…
We show that quantum Reed-Solomon codes constructed from classical Reed-Solomon codes can approach the capacity on the quantum erasure channel of $d$-level systems for large dimension $d$. We study the performance of one-way quantum repeaters with these codes and obtain a significant improvement in key generation rate compared to previously investigated encoding schemes with quantum parity codes and quantum polynomial codes. We also compare the three generation of quantum repeaters using quantum Reed-Solomon codes and identify parameter regimes where each generation performs the best.
A potential quantum internet would open up the possibility of realizing numerous new applications, including provably secure communication. Since losses of photons limit long-distance, direct quantum communication and widespread quantum networks, quantum repeaters are needed. The so-called PLOB-repeaterless bound [Pirandola et al., Nat. Commun. 8, 15043 (2017)] is a fundamental limit on the quantum capacity of direct quantum communication. Here, we analytically derive the quantum-repeater gain for error-corrected, one-way quantum repeaters based on higher-dimensional qudits for two different p…
We propose to use a collective excitation blockade mechanism to identify errors that occur due to disturbances of single atoms in ensemble quantum registers where qubits are stored in the collective population of different internal atomic states. A simple error correction procedure and a simple decoherence-free encoding of ensemble qubits in the hyperfine states of alkali atoms are presented.
All-photonic quantum repeater is not yet commercially applicable due to difficulty in the generation of repeater graph states (RGS) and the probabilistic nature of Bell-state measurement. In recent years, several deterministic protocols have been proposed to generate RGS. However, they can only create bare RGS and a rate-distance analysis for the deterministic approach is currently missing. We present a deterministic generation scheme of encoded RGS and show that after optimization, the repeater using our scheme performs at least 4.9 times better than the traditional probabilistic generation s…
We propose an architecture of quantum-error-correction-based quantum repeaters that combines techniques used in discrete- and continuous-variable quantum information. Specifically, we propose to encode the transmitted qubits in a concatenated code consisting of two levels. On the first level we use a continuous-variable GKP code encoding the qubit in a single bosonic mode. On the second level we use a small discrete-variable code. Such an architecture has two important features. Firstly, errors on each of the two levels are corrected in repeaters of two different types. This enables for achiev…
We propose a novel one-way quantum repeater architecture based on photonic tree-cluster states. Encoding a qubit in a photonic tree-cluster protects the information from transmission loss and enables long-range quantum communication through a chain of repeater stations. As opposed to conventional approaches that are limited by the two-way communication time, the overall transmission rate of the current quantum repeater protocol is determined by the local processing time enabling very high communication rates. We further show that such a repeater can be constructed with as little as two station…
We propose a scheme for realizing quantum repeaters with Rydberg-blockade coupled atomic ensembles, based on a recently proposed collective encoding strategy. Rydberg-blockade mediated two-qubit gates and efficient cooperative photon emission are employed to create ensemble-photon entanglement. Thanks to deterministic entanglement swapping operations via Rydberg-based two-qubit gates, and to the suppression of multi-excitation errors by the blockade effect, the entanglement distribution rate of the present scheme is higher by orders of magnitude than the rates achieved by other ensemble-based …
Quantum repeaters are indispensable for high-rate, long-distance quantum communications. The vision of a future quantum internet strongly hinges on realizing quantum repeaters in practice. Numerous repeaters have been proposed for discrete-variable (DV) single-photon-based quantum communications. Continuous variable (CV) encodings over the quadrature degrees of freedom of the electromagnetic field mode offer an attractive alternative. For example, CV transmission systems are easier to integrate with existing optical telecom systems compared to their DV counterparts. Yet, repeaters for CV have …
We propose a hybrid quantum repeater based on ancillary coherent field states and material qubits coupled to optical cavities. For this purpose, resonant qubit-field interactions and postselective field measurements are determined which are capable of realizing all necessary two-qubit operations for the actuation of the quantum repeater. We explore both theoretical and experimental possibilities of generating near-maximally-entangled qubit pairs ($F>0.999$) over long distances. It is shown that our scheme displays moderately low repeater rates, between $5 \times 10^{-4}$ and $23$ pairs per sec…
We propose a heralded quantum repeater protocol based on the general interface between the circularly polarized photon and the quantum dot embedded in a double-sided optical microcavity. Our effective time-bin encoding on photons results in the deterministic faithful entanglement distribution with one optical fiber for the transmission of each photon in our protocol, not two or more. Our efficient parity-check detector implemented with only one input-output process of a single photon as a result of cavity quantum electrodynamics makes the entanglement channel extension and entanglement purific…
Twin-field (TF) quantum key distribution (QKD) fundamentally alters the rate-distance relationship of QKD, offering the scaling of a single-node quantum repeater. Although recent experiments have demonstrated the new opportunities for secure long-distance communications allowed by TF-QKD, formidable challenges remain to unlock its true potential. Previous demonstrations have required intense stabilisation signals at the same wavelength as the quantum signals, thereby unavoidably generating Rayleigh scattering noise that limits the distance and bit rate. Here, we introduce a novel dual-band sta…
In order for quantum communications systems to become widely used, it will probably be necessary to develop quantum repeaters that can extend the range of quantum key distribution systems and correct for errors in the transmission of quantum information. Quantum logic gates based on linear optical techniques appear to be a promising approach for the development of quantum repeaters, and they may have applications in quantum computing as well. Here we describe the basic principles of logic gates based on linear optics, along with the results from several experimental demonstrations of devices o…
Quantum repeaters are a promising platform for realizing long-distance quantum communication and thus could form the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. Repeater protocols that encode information in single- or multi-photon states are limited by transmission losses and the cost of implementing entangling gates or Bell measurements. In this work, we consider implementing a quantum repeater protocol using Gottesman-Kitaev-Preskill (GKP) qubits. These qubits are natural elements for quantum repeater protocols, because they allow for…
We present a quantum repeater scheme based on the recently proposed qubit amplifier [N. Gisin, S. Pironio and N. Sangouard, Phys. Rev. Lett. 105, 070501 (2010)]. It relies on a on-demand entangled-photon pair source which uses on-demand single-photon sources, linear optical elements and atomic ensembles. Interestingly, the imperfections affecting the states created from this source, caused e.g. by detectors with non-unit efficiencies, are systematically purified from an entanglement swapping operation based on a two-photon detection. This allows the distribution of entanglement over very long …
We describe a quantum repeater protocol for long-distance quantum communication. In this scheme, entanglement is created between qubits at intermediate stations of the channel by using a weak dispersive light-matter interaction and distributing the outgoing bright coherent light pulses among the stations. Noisy entangled pairs of electronic spin are then prepared with high success probability via homodyne detection and postselection. The local gates for entanglement purification and swapping are deterministic and measurement-free, based upon the same coherent-light resources and weak interacti…
We introduce a protocol to distribute entanglement between remote parties. Our protocol is based on a chain of repeater stations, and exploits topological encoding to tolerate very high levels of defects and errors. The repeater stations may employ probabilistic entanglement operations which usually fail; ours is the first protocol to explicitly allow for technologies of this kind. Given an error rate between stations in excess of 10%, arbitrarily long range high fidelity entanglement distribution is possible even if the heralded failure rate within the stations is as high as 99%, providing th…
Quantum key distribution allows for the generation of a secret key between distant parties connected by a quantum channel such as optical fibre or free space. Unfortunately, the rate of generation of a secret key by direct transmission is fundamentally limited by the distance. This limit can be overcome by the implementation of so-called quantum repeaters. Here, we assess the performance of a specific but very natural setup called a single sequential repeater for quantum key distribution. We offer a fine-grained assessment of the repeater by introducing a series of benchmarks. The benchmarks, …
Hierarchical Generation and Design of Tree-Codes for Resource-Efficient Loss-Tolerant Quantum Communications
University of Trieste（的里雅斯特大学）；Istituto Nazionale di Fisica Nucleare, Trieste Section（意大利国家核物理研究所的里雅斯特分部）；Institute for Quantum Optics and Quantum Information of the Austrian Academy of Sciences（奥地利科学院量子光学与量子信息研究所）；Institute for Theoretical Physics, University of Innsbruck（因斯布鲁克大学理论物理研究所）
The future of quantum repeater networking will require interoperability between various error correcting codes. A few specific code conversions and even a generalized method are known, however, no detailed analysis of these techniques in the context of quantum networking has been performed. In this paper, we analyze a generalized procedure to create Bell pairs encoded heterogeneously between two separate codes used often in error corrected quantum repeater network designs. We begin with a physical Bell pair, then encode each qubit in a different error correcting code, using entanglement purifi…
Quantum key distribution is a way to distribute secret keys to distant users with information theoretic security and key rates suitable for real-world applications. Its rate-distance figure, however, is limited by the natural loss of the communication channel and can never surpass a theoretical limit known as point-to-point secret key capacity. Recently, a new type of quantum key distribution with an intermediate relay was proposed to overcome this limit (M. Lucamarini, Z. L. Yuan, J. F. Dynes and A. J. Shields, Nature, 2018). However, a standard application of the decoy state method limited t…
In this paper, we consider quantum key distribution (QKD) in a quantum network with both quantum repeaters and a small number of trusted nodes. In contrast to current QKD networks with only trusted nodes and the true Quantum Internet with only quantum repeaters, such networks represent a middle ground, serving as near-future QKD networks. In this setting, QKD can be efficiently and practically deployed, while providing insights for the future true Quantum Internet. To significantly improve the key generation efficiency in such networks, we develop a new dynamic routing strategy that makes rout…
We propose efficient-phase-encoding protocols for continuous-variable quantum key distribution using coherent states and postselection. By these phase encodings, the probability of basis mismatch is reduced and total efficiency is increased. We also propose mixed-state protocols by omitting a part of classical communication steps in the efficient-phase-encoding protocols. The omission implies a reduction of information to an eavesdropper and possibly enhances the security of the protocols. We investigate the security of the protocols against individual beam splitting attack.
Quantum key distribution -- the establishment of information-theoretically secure keys based on quantum physics -- is mainly limited by its practical performance, which is characterised by the dependence of the key rate on the channel transmittance $R(η)$. Recently, schemes based on single-photon interference have been proposed to improve the key rate to $R=O(\sqrtη)$ by overcoming the point-to-point secret key capacity bound with interferometers. Unfortunately, all of these schemes require challenging global phase locking to realise a stable long-arm single-photon interferometer with a precis…
We present an experimental demonstration of a quantum key distribution protocol using coherent polarization states. Post selection is used to ensure a low error rate and security against beam splitting attacks even in the presence of high losses. Signal encoding and readout in polarization bases avoids the difficult task of sending a local oscillator with the quantum channel. This makes our setup robust and easy to implement. A shared key was established for losses up to 64%.
As in conventional computing, key attributes of quantum memories are high storage density and, crucially, random access, or the ability to read from or write to an arbitrarily chosen register. However, achieving such random access with quantum memories in a dense, hardware-efficient manner remains a challenge, for example requiring dedicated cavities per qubit or pulsed field gradients. Here we introduce a protocol using chirped pulses to encode qubits within an ensemble of quantum two-level systems, offering both random access and naturally supporting dynamical decoupling to enhance the memor…
Society relies and depends increasingly on information exchange and communication. In the quantum world, security and privacy is a built-in feature for information processing. The essential ingredient for exploiting these quantum advantages is the resource of entanglement, which can be shared between two or more parties. The distribution of entanglement over large distances constitutes a key challenge for current research and development. Due to losses of the transmitted quantum particles, which typically scale exponentially with the distance, intermediate quantum repeater stations are needed.…
We report the experimental realization of heralded distribution of single-photon path entanglement at telecommunication wavelengths in a repeater-like architecture. The entanglement is established upon detection of a single photon, originating from one of two spontaneous parametric down conversion photon pair sources, after erasing the photon's which-path information. In order to certify the entanglement, we use an entanglement witness which does not rely on post-selection. We herald entanglement between two locations, separated by a total distance of 2 km of optical fiber, at a rate of 1.6 kH…
We design a quantum repeater architecture using individual $^{167}$Er ions doped into Y$_2$SiO$_5$ crystal. This ion is a promising candidate for a repeater protocol because of its long hyperfine coherence time in addition to its ability to emit photons within the telecommunication wavelength range. To distribute entanglement over a long distance, we propose two different swapping gates between nearby ions using the exchange of virtual cavity photons and the electric dipole-dipole interaction. We analyze their expected performance, and discuss their strengths and weaknesses. Then, we show that…
Twin-field quantum key distribution (TF-QKD) protocol and its variants, e.g. phase-matching (PM) QKD and TF-QKD based on sending or not sending, are highly attractive since they are able to overcome the well-known rate-loss limit for QKD protocols without repeater: $R=O(η)$ with $η$ standing for the channel transmittance. However, all these protocols require active phase randomization and post-selection that play an essential role together in their security proof. Counterintuitively, we find that in TF-QKD, beating the rate-loss limit is still possible even if phase randomization and post-sele…
When photons are sent through a fiber as part of a quantum communication protocol, the error that is most difficult to correct is photon loss. Here, we propose and analyze a two-to-four qubit encoding scheme, which can recover the loss of one qubit in the transmission. This device acts as a repeater when it is placed in series to cover a distance larger than the attenuation length of the fiber, and it acts as an optical quantum memory when it is inserted in a fiber loop. We call this dual-purpose device a ``quantum transponder.''
We report the results of the implementation of a quantum key distribution (QKD) network using standard fibre communication lines in Moscow. The developed QKD network is based on the paradigm of trusted repeaters and allows a common secret key to be generated between users via an intermediate trusted node. The main feature of the network is the integration of the setups using two types of encoding, i.e. polarisation encoding and phase encoding. One of the possible applications of the developed QKD network is the continuous key renewal in existing symmetric encryption devices with a key refresh …
