The millimeter wave bands are being increasingly considered for wireless communication to unmanned aerial vehicles (UAVs). Critical to this undertaking are statistical channel models that describe the distribution of constituent parameters in scenarios of interest. This paper presents a general modeling methodology based on data-training a generative neural network. The proposed generative model has a two-stage structure that first predicts the link state (line-of-sight, non-line-of-sight, or outage), and subsequently feeds this state into a conditional variational autoencoder (VAE) that generates the path losses, delays, and angles of arrival and departure for all the propagation paths. The methodology is demonstrated for 28 GHz air-to-ground channels between UAVs and a cellular system in representative urban environments, with training datasets produced through ray tracing. The demonstration extends to both standard base stations (installed at street level and downtilted) as well as dedicated base stations (mounted on rooftops and uptilted). The proposed approach is able to capture complex statistical relations in the data and it significantly outperforms standard 3GPP models, even after refitting the parameters of those models to the data.
Millimeter-wave rotary-wing (RW) unmanned aerial vehicle (UAV) air-to-ground (A2G) links face unpredictable Doppler effect arising from the inevitable wobbling of RW UAV. Moreover, the time-varying channel characteristics during transmission lead to inaccurate channel estimation, which in turn results in the deteriorated bit error probability performance of the UAV A2G link. This paper studies the impact of mechanical wobbling on the Doppler effect of the millimeter-wave wireless channel between a hovering RW UAV and a ground node. Our contributions of this paper lie in: i) modeling the wobbli…
Unmanned aerial vehicles (UAVs) have found widespread commercial, civilian, and military applications. Wireless communication has always been one of the core technologies for UAV. However, the communication capacity is becoming a bottleneck for UAV to support more challenging application scenarios. The heavily-occupied sub-6 GHz frequency band is not sufficient to meet the ultra high-data-traffic requirements. The utilization of the millimeter-wave (mmWave) frequency bands is a promising direction for UAV communications, where large antenna arrays can be packed in a small area on the UAV to pe…
Recently, the use of millimeter wave (mmW) frequencies has emerged as a promising solution for wirelessly connecting unmanned aerial vehicles (UAVs) to ground users. However, employing UAVassisted directional mmW links is challenging due to the random fluctuations of hovering UAVs. In this paper, the performance of UAV-based mmW links is investigated when UAVs are equipped with square array antennas. The 3GPP antenna propagation patterns are used to model the square array antenna. It is shown that the square array antenna is sensitive to both horizontal and vertical angular vibrations of UAVs.…
Millimeter wave radars are popularly used in last-mile radar-based defense systems. Detection of low-altitude airborne target using these radars at low-grazing angles is an important problem in the field of electronic warfare, which becomes challenging due to the significant effects of clutters in the terrain. This paper provides both experimental and analytical investigation of micro unmanned aerial vehicle (UAV) detection in a rocky terrain using a low grazing angle, surface-sited 24 GHz dual polarized frequency modulated continuous wave (FMCW) radar. The radar backscatter signal from the UA…
The integration of unmanned aerial vehicles (UAVs) and millimeter wave (mmWave) wireless systems has been recently proposed to provide high data rate aerial links for next generation wireless networks. However, establishing UAV-based mmWave links is quite challenging due to the random fluctuations of hovering UAVs which can induce antenna gain mismatch between transmitter and receiver. To assess the benefit of UAV-based mmWave links, in this paper, tractable, closed-form statistical channel models are derived for three UAV communication scenarios: (i) a direct UAV-to-UAV link, (ii) an aerial r…
The emerging millimeter-wave (mm-wave) unmanned aerial vehicle (UAV) air-to-ground (A2G) communications are facing the Doppler effect problem that arises from the inevitable wobbling of the UAV. The fast time-varying channel for UAV A2G communications may lead to the outdated channel state information (CSI) from the channel estimation. In this paper, we introduce two detectors to demodulate the received signal and get the instantaneous bit error probability (BEP) of a mm-wave UAV A2G link under imperfect CSI. Based on the designed detectors, we propose an adaptive modulation scheme to maximize…
Communication and video capture from unmanned aerial vehicles (UAVs) offer significant potential for assisting first responders in remote public safety settings. In such uses, millimeter wave (mmWave) wireless links can provide high throughput and low latency connectivity between the UAV and a remote command center. However, maintaining reliable aerial communication in the mmWave bands is challenging due to the need to support high speed beam tracking and overcome blockage. This paper provides a simulation study aimed at assessing the feasibility of public safety UAV connectivity through a 5G …
With growing interest in mmWave connectivity for UAVs, a basic question is whether networks intended for terrestrial users can provide sufficient aerial coverage as well. To assess this possibility, the paper proposes a novel evaluation methodology using generative models trained on detailed ray tracing data. These models capture complex propagation characteristics and can be readily combined with antenna and beamforming assumptions. Extensive simulation using these models indicate that standard (street-level and downtilted) base stations at typical microcellular densities can indeed provide s…
The use of Millimeter-wave (mmWave) spectrum in cellular communications has recently attracted growing interest to support the expected massive increase in traffic demands. However, the high path-loss at mmWave frequencies poses severe challenges. In this paper, we analyze the potential coverage gains of using unmanned aerial vehicles (UAVs), as hovering relays, in integrated access and backhaul (IAB) mmWave cellular scenarios. Specifically, we utilize the WinProp software package, which employs ray tracing methodology, to study the propagation characteristics of outdoor mmWave channels at 30 …
In this paper, a full-duplex unmanned aerial vehicle (FD-UAV) relay is employed to increase the communication capacity of millimeter-wave (mmWave) networks. Large antenna arrays are equipped at the source node (SN), destination node (DN), and FD-UAV relay to overcome the high path loss of mmWave channels and to help mitigate the self-interference at the FD-UAV relay. Specifically, we formulate a problem for maximization of the achievable rate from the SN to the DN, where the UAV position, analog beamforming, and power control are jointly optimized. Since the problem is highly non-convex and in…
Recent developments in robotics and communication technologies are paving the way towards the use of Unmanned Aerial Vehicles (UAVs) to provide ubiquitous connectivity in public safety scenarios or in remote areas. The millimeter wave (mmWave) spectrum, in particular, has gained momentum since the huge amount of free spectrum available at such frequencies can yield very high data rates. In the UAV context, however, mmWave operations may incur severe signal attenuation and sensitivity to blockage, especially considering the very long transmission distances involved. In this paper, we present a …
With the fifth-generation (5G) mobile networks being actively standardized and deployed, many new vehicular communications technologies are developed to support and enrich various application scenarios. Unmanned aerial vehicle (UAV) enabled communications emerges as one of many promising solutions of constructing the next-generation highly reconfigurable and mobile networks. In this article, we first investigate and envision the challenges of future UAV applications from the net-work, system, and hardware design perspectives, and then pre-sent a UAV aerial base station (ABS) prototype which wo…
On-demand deployments of millimeter-wave (mmWave) access points (APs) carried by unmanned aerial vehicles (UAVs) are considered today as a potential solution to enhance the performance of 5G+ networks. The battery lifetime of modern UAVs, though, limits the flight times in such systems. In this letter, we evaluate a feasible deployment alternative for temporary capacity boost in the areas with highly fluctuating user demands. The approach is to land UAV-based mmWave APs on the nearby buildings instead of hovering over the area. Within the developed mathematical framework, we compare the system…
Jittering effects significantly degrade the performance of UAV millimeter-wave (mmWave) communications. To investigate the impacts of UAV jitter on mmWave communications, we firstly model UAV mmWave channel based on the geometric relationship between element antennas of the uniform planar arrays (UPAs). Then, we extract the relationship between (I) UAV attitude angles & position coordinates and (II) angle of arrival (AoA) & angle of departure (AoD) of mmWave channel, and we also derive the distribution of AoA/AoD at UAV side from the random fluctuations of UAV attitude angles, i.e., UAV jitter…
In this paper, a novel approach that uses an unmanned aerial vehicle (UAV)-carried intelligent reflector (IR) is proposed to enhance the performance of millimeter wave (mmW) networks. In particular, the UAV-IR is used to intelligently reflect mmW beamforming signals from a base station towards a mobile outdoor user, while harvesting energy from mmW signals to power the IR. To maintain a line-of-sight (LOS) channel, a reinforcement learning (RL) approach, based on Q-learning and neural networks, is proposed to model the propagation environment, such that the location and reflection coefficient …
The millimeter wave (mmWave) technology enables unmanned aerial vehicles (UAVs) to offer broadband high-speed wireless connectivity in fifth generation (5G) and beyond (6G) networks. However, the limited footprint of a single UAV implementing analog beamforming (ABF) requires multiple aerial stations to operate in swarms to provide ubiquitous network coverage, thereby posing serious constraints in terms of battery power consumption and swarm management. A possible remedy is to investigate the concept of hybrid beamforming (HBF) transceivers, which use a combination of analog beamformers as a s…
This paper discusses the analysis of a fixed-wing unmanned aerial vehicle (UAV)-based millimeter wave (mmWave) backhaul link, that is offered as a cost-effective and easy deploy the solution to connect a disaster or remote area to the nearest core network. We present the optimal design of a relay system based on fixed-wing UAV, taking into account the actual channel parameters such as the UAV vibrations, tracking error, real 3GPP antenna pattern, UAV's height, flight path, and the effect of physical obstacles. The performance of the considered system is evaluated in terms of outage probability…
5G enabled maritime unmanned aerial vehicle (UAV) communication is one of the important applications of 5G wireless network which requires minimum latency and higher reliability to support mission-critical applications. Therefore, lossless reliable communication with a high data rate is the key requirement in modern wireless communication systems. These all factors highly depend upon channel conditions. In this work, a channel model is proposed for air-to-surface link exploiting millimeter wave (mmWave) for 5G enabled maritime unmanned aerial vehicle (UAV) communication. Firstly, we will prese…
Physical layer security (PLS) techniques can help to protect wireless networks from eavesdropper attacks. In this paper, we consider the authentication technique that uses fingerprint embedding to defend 5G cellular networks with unmanned aerial vehicle (UAV) systems from eavesdroppers and intruders. Since the millimeter wave (mmWave) cellular networks use narrow and directional beams, PLS can take further advantage of the 3D spatial dimension for improving the authentication of UAV users. Considering a multi-user mmWave cellular network, we propose a power allocation technique that jointly ta…
Wireless communication at millimeter wave frequencies has attracted considerable attention for the delivery of high-bit-rate connectivity to unmanned aerial vehicles (UAVs). However, conducting the channel measurements necessary to assess communication at these frequencies has been challenging due to the severe payload and power restrictions in commercial UAVs. This work presents a novel lightweight (approximately 1.3 kg) channel measurement system at 28 GHz installed on a commercially available UAV. A ground transmitter equipped with a horn antenna conveys sounding signals to a UAV equipped w…
Based on the geometry and ray tracing (RT) theory, a millimeter wave (mmWave) channel model and parameter computation method for unmanned aerial vehicle (UAV) assisted air-to-ground (A2G) communications are proposed in this paper. In order to speed up the parameter calculation, a reconstruction process of scene database on the original digital map is developed. Moreover, the effects of reconstruction accuracy on the channel parameter and characteristic are analyzed by extensive simulations at 28 GHz under the campus scene. The simulation and analysis results show that the simplified database c…
The blockage is a key challenge for millimeter wave communication systems, since these systems mainly work on line-of-sight (LOS) links, and the blockage can degrade the system performance significantly. It is recently found that visual information, easily obtained by cameras, can be utilized to extract the location and size information of the environmental objects, which can help to infer the communication parameters, such as blockage status. In this paper, we propose a novel vision-aided handover framework for UAV-assisted V2X system, which leverages the images taken by cameras at the mobile…
Cellular-connected unmanned aerial vehicles (UAVs) are recently getting significant attention due to various practical use cases, e.g., surveillance, data gathering, purchase delivery, among other applications. Since UAVs are low power nodes, energy and spectral efficient communication is of paramount importance. To that end, multiple access (MA) schemes can play an important role in achieving high energy efficiency and spectral efficiency. In this work, we introduce rate-splitting MA (RSMA) and non-orthogonal MA (NOMA) schemes in a cellular-connected UAV network. In particular, we investigate…
As 5G wireless systems and networks are now being globally commercialized and deployed, more diversified application scenarios are emerging, quickly reshaping our societies and paving the road to the beyond 5G (6G) era when terahertz (THz) and unmanned aerial vehicle (UAV) communications may play critical roles. In this paper, aerial channel models under multiple meteorological conditions such as rain, fog and snow, have been investigated at frequencies of interest (from 2 GHz to 900 GHz) for UAV communications. Furthermore, the link budget and the received signal-to-noise ratio (SNR) performa…
In this study, we consider an unmanned aerial vehicle (UAV)-assisted heterogeneous network that is offered as a cost-effective and easy to deploy solution to solve the problem related to transferring traffic of distributed small cells to the core network. For any given distribution of small cell base stations (SBSs), we first characterize an accurate millimeter wave (mmWave) channel model for SBS to networked flying platform (NFP) by taking into consideration real parameters such as UAV's vibrations, distribution of SBSs, position of UAVs in the sky, real three-dimensional (3D) antenna pattern…
Wireless communication between an unmanned aerial vehicle (UAV) and the ground base station (BS) is susceptible to adversarial jamming. In such situations, it is important for the UAV to indicate a new channel to the BS. This paper describes a method of creating spatial codes that map the chosen channel to the motion and location of the UAVs in space, wherein the latter physically traverses the space from a given so called "constellation point'' to another. These points create patterns in the sky, analogous to modulation constellations in classical wireless communications, and are detected at …
SkySense: A Semi-Supervised Generative Framework for UAV Localization in ISAC Networks
School of Information Science and Engineering, Southeast University（东南大学信息科学与工程学院）；Cooperative Medianet Innovation Center (CMIC), Shanghai Jiao Tong University（上海交通大学协同网创新中心）；School of Automation, Southeast University（东南大学自动化学院）
Modern cellular systems rely increasingly on simultaneous communication in multiple discontinuous bands for macro-diversity and increased bandwidth. Multi-frequency communication is particularly crucial in the millimeter wave (mmWave) and Terahertz (THz) frequencies, as these bands are often coupled with lower frequencies for robustness. Evaluation of these systems requires statistical models that can capture the joint distribution of the channel paths across multiple frequencies. This paper presents a general neural network based methodology for training multi-frequency double directional sta…
Drones, unmanned aerial vehicles (UAVs), or unmanned aerial systems (UAS) are expected to be an important component of 5G/beyond 5G (B5G) communications. This includes their use within cellular architectures (5G UAVs), in which they can facilitate both wireless broadcast and point-to-point transmissions, usually using small UAS (sUAS). Allowing UAS to operate within airspace along with commercial, cargo, and other piloted aircraft will likely require dedicated and protected aviation spectrum at least in the near term, while regulatory authorities adapt to their use. The command and control (C2…
Millimeter-wave (mmWave), massive multiple-input multiple-output (MIMO), are expected to play a crucial role for 5G and beyond cellular and next-generation wireless local area network (WLAN) communications. Moreover, unmanned aerial vehicles (UAVs) are also considered as an important component of next-generation networks. In this paper, we propose and present a mmWave distributed phased-arrays (DPA) architecture and proof-of-concept (PoC) designs for user equipment (UE) and unmanned aerial vehicles (UAVs) which will be used in 5G/Beyond 5G wireless communication networks. Through enabling a mu…
Unmanned aerial vehicles (UAVs) are the emerging vital components of millimeter wave (mmWave) wireless systems. Accurate beam alignment is essential for efficient beam-based mmWave communications of UAVs with base stations (BSs). Conventional beam sweeping approaches often have large overhead due to the high mobility and autonomous operation of UAVs. Learning-based approaches greatly reduce the overhead by leveraging UAV data, like position to identify optimal beam directions. In this paper, we propose a reinforcement learning (RL)-based framework for UAV-BS beam alignment using deep Q-Network…
In this paper, millimeter wave (mmWave) wireless channel characteristics (Doppler spread and path loss modeling) for Unmanned Aerial Vehicles (UAVs) assisted communication is analyzed and studied by emulating the real UAV motion using a robotic arm. The motion considers the actual turbulence caused by the wind gusts to the UAV in the atmosphere, which is statistically modeled by the widely used Dryden wind model. The frequency under consideration is 28 GHz in an anechoic chamber setting. A total of 11 distance points from 3.5 feet to 23.5 feet in increments of 2 feet were considered in this ex…
In this paper, we jointly consider the downlink simultaneous wireless information and power transfer (SWIPT) and uplink information transmission in unmanned aerial vehicle (UAV)-assisted millimeter wave (mmWave) cellular networks, in which the user equipment (UE) locations are modeled using Poisson cluster processes (e.g., Thomas cluster processes or Matérn cluster processes). Distinguishing features of mmWave communications, such as different path loss models for line-of-sight (LOS) and non-LOS (NLOS) links and directional transmissions are taken into account. In the downlink phase, the assoc…
Intelligent reflecting surfaces (IRSs) with the ability to reconfigure inherent electromagnetic reflection and absorption characteristics in real-time provide unparalleled prospects to improve wireless connectivity in adverse circumstances. Unmanned aerial vehicles (UAV)-assisted wireless networks are evolved as a reliable solution to combat non-line of sight (NLoS) scenarios. Thereby, the IRS-empowered UAV-assisted cellular networks will be a significant role-player to improve the coverage and user experiences. The paper aimed to minimize the path loss and maximize the achievable data rate in…
We propose a fixed wing unmanned aerial vehicles (UAV)-based millimeter wave (mmWave) backhaul links, that is offered as a cost effective and easy to deploy solution, to connect a disaster or remote area to the nearest core network. First, we fully characterize the single relay fixed-wing UAV-based communication system by taking into account the effects of realistic physical parameters, such as the UAV's circular path, critical points of the flight path, heights and positions of obstacles, flight altitude, tracking error, the severity of UAV's vibrations, the real 3D antenna pattern, mmWave at…
The integration of unmanned aerial vehicles (UAVs) into the terrestrial cellular networks is envisioned as one key technology for next-generation wireless communications. In this work, we consider the physical layer security of the communications links in the millimeter-wave (mmWave) spectrum which are maintained by UAVs functioning as base stations (BS). In particular, we propose a new precoding strategy which incorporates the channel state information (CSI) of the eavesdropper (Eve) compromising link security. We show that our proposed precoder strategy eliminates any need for artificial noi…
Fixed-wing unmanned aerial vehicles (UAVs) are of great potential to serve as aerial access points (APs) owing to better aerodynamic performance and longer flight endurance. However, the inherent hovering feature of fixed-wing UAVs may result in discontinuity of connections and frequent handover of ground users (GUs). In this work, we model and evaluate the performance of a fixed-wing UAV network, where UAV APs provide coverage to GUs with millimeter wave backhaul. Firstly, it reveals that network spatial throughput (ST) is independent of the hover radius under real-time closest-UAV associatio…
Unmanned aerial vehicles (UAVs) are increasingly employed for numerous public and civil applications, such as goods delivery, medicine, surveillance, and telecommunications. For the latter, UAVs with onboard communication equipment may help temporarily offload traffic onto the neighboring cells in fifth-generation networks and beyond (5G+). In this paper, we propose and evaluate the use of UAVs traveling over the area of interest to relieve congestion in 5G+ systems under spontaneous traffic fluctuations. To this end, we assess two inherently different offloading schemes, named routed and cont…
Statistical channel models are instrumental to design and evaluate wireless communication systems. In the millimeter wave bands, such models become acutely challenging; they must capture the delay, directions, and path gains, for each link and with high resolution. This paper presents a general modeling methodology based on training generative neural networks from data. The proposed generative model consists of a two-stage structure that first predicts the state of each link (line-of-sight, non-line-of-sight, or outage), and subsequently feeds this state into a conditional variational autoenco…
Unmanned Aerial Vehicle (UAV) networks can provide a resilient communication infrastructure to enhance terrestrial networks in case of traffic spikes or disaster scenarios. However, to be able to do so, they need to be based on high-bandwidth wireless technologies for both radio access and backhaul. With this respect, the millimeter wave (mmWave) spectrum represents an enticing solution, since it provides large chunks of untapped spectrum that can enable ultra-high data-rates for aerial platforms. Aerial mmWave channels, however, experience characteristics that are significantly different from…
Unmanned aerial vehicle (UAV) wireless communications have experienced an upsurge of interest in both military and civilian applications, due to its high mobility, low cost, on-demand deployment, and inherent line-of-sight (LoS) air-to-ground channels. However, these benefits also make UAV wireless communication systems vulnerable to malicious eavesdropping attacks. In this article, we aim to examine the physical layer security issues in UAV systems. In particular, passive and active eavesdroppings are two primary attacks in UAV systems. We provide an overview on emerging techniques, such as t…
Unmanned aerial vehicles (UAVs) have steadily gained attention to overcome the harsh propagation loss and blockage issue of millimeter-wave communication. However, UAV communication systems suffer from energy consumption, which limits the flying time of UAVs. In this paper, we propose several UAV energy consumption minimization techniques through the aid of multiple intelligent reflecting surfaces (IRSs). In specific, we introduce a tractable model to effectively capture the characteristics of multiple IRSs and multiple user equipments (UEs). Then, we derive a closed form expression for the UE…
To meet increasing data demands, service providers are considering the use of Unmanned aerial vehicles (UAVs) for delivering connectivity as aerial base stations (BSs). UAVs are especially important to provide connectivity in case of disasters and accidents which may cripple completely the existing terrestrial networks. However, in order to maintain the communication of UAVs with the core network, it is essential to provide them with wireless backhaul connection to terrestrial BSs. In this work, we use stochastic geometry to study the impact of millimeter-wave (mmWave) backhauling of UAVs in a…
University of Bologna（博洛尼亚大学）；VTT Technical Research Centre of Finland Ltd（芬兰国家技术研究中心）
A measurement setup made of millimeter-wave and ultra wideband transceivers mounted on both a customized UAV and a ground station for full 3D wireless propagation analysis is described in this work. The developed system represents a flexible solution for the characterization of wireless channels and especially of urban propagation, as the drone might be easily located almost anywhere from ground level to the buildings rooftop and beyond. The double directional properties of the channel can be achieved by rotating directive antennas at the link ends. Other possible applications in urban context…
