Highly-efficient solar cells containing lead halide perovskites are expected to revolutionize sustainable energy production in the coming years. Combining these next-generation solar panels with agriculture, can optimize land-use, but brings new risks in case of leakage into the soil. Perovskites are generally assumed to be toxic because of the lead (Pb), but experimental evidence to support this prediction is scarce. We used Arabidopsis thaliana to test the toxicity of the lead-based perovskite MAPbI3 (MA = CH3NH3) and several of its precursors in plants. Our results show that MAPbI3 severely hampers plant growth at concentrations above 5 microM. Surprisingly, we find that the precursors MAI is equally toxic, while lead-based precursors without iodide are only toxic above 500 microM. These observations reveal that perovskite toxicity at low concentrations is caused by iodide ions specifically, and contrast the widespread idea that lead is the most harmful component. We calculate that iodide toxicity thresholds are likely to reach in the soil upon perovskite leakage, but much less so for lead toxicity thresholds. Hence, this work stresses the importance to further understand and predict harmful effects of iodide-containing perovskites in the environment.
The low ionization energy of an $A$ site molecule is a very important factor, which determines the thermodynamical stability of $A$PbI$_3$ hybrid halide perovskites, while the size of the molecule governs the stable phase at room temperature and, eventually, the bandgap. It is challenging to achieve both a low ionization energy and the reasonable size for the PbI$_3$ cage to circumvent the stability issue inherent to hybrid halide perovskites. Here we propose a new three-membered charged ring radical, which demonstrates a low ionization energy that renders a good stability for its correspondin…
Organic-inorganic hybrid halide perovskites, in which the A cations of an ABX$_3$ perovskite are replaced by organic cations, may be used for photovoltaic and solar thermoelectric applications. In this contribution, we systematically study three lead-free hybrid perovskites, i.e., methylammonium tin iodide CH$_3$NH$_3$SnI$_3$, ammonium tin iodide NH$_4$SnI$_3$, and formamidnium tin iodide HC(NH$_2$)$_2$SnI$_3$, by first-principles calculations. We find that in addition to the commonly known motif in which the corner-shared SnI$_6$ octahedra form a three-dimensional network, these materials may…
Mixing halides in metal halide perovskites (MHPs) is an effective approach to adjust MHPs bandgap for applications in tandem solar cells. However, mixed-halide (MH-) MHPs undergo light-induced-phase-segregation (LIPS) under continuous illumination. Therefore, understanding the mechanism of LIPS is necessary for developing stable MH-MHPs. In this work, we investigated LIPS in layered (L) MHPs and discovered a critical role of spacer cations in LIPS. Through probing chemical changes of LIPS, we unveil light-induced-iodide-repulsion and the formation of Br-rich-phase in illuminated regions during…
Over the last few years of the heyday of hybrid halide perovskites, so many metal cations additives have been tested to improve their optoelectronic properties that it is already difficult to find an element that has not yet been tried. In general, the variety of these approaches is united under the name "doping", however, there is currently no clear understanding of the mechanisms of the influence of the metal ion additives on the properties of the lead halide perovskite materials. For many ions there is even no consensus on the most fundamental questions: what lattice position does a given i…
Recently, an aziridinium lead iodide perovskite was proposed as a possible solar cell absorber material. We investigated the stability of this material using a density-functional theory with an emphasis on the ring strain associated with the three-membered aziridinium cation. It is shown that the aziridinium ring is prone to opening within the PbI$_3$ environment. When exposed to moisture, aziridinium lead iodide can readily react with water. The resultant product will not likely be a stoichiometric lead halide perovskite structure.
The volume of research into organo-lead hailde perovskites is increasing rapidly, with perovskite solar cell efficiencies reaching as high as 22 percent. There is considerable evidence that mobile ions in the perovskite strongly influence the properties of the solar cell, with the majority of studies carried out on whole cells under bias. Here we use muon spin relaxation to directly probe iodide diffusion in methyl ammonium lead iodide (MAPI). This is the first time that has been used to detect iodide diffusion in any material and the results provide valuable insight into the movement of ions …
Ruddlesden-Popper hybrid iodide 2D perovskites are put forward as stable alternatives to their 3D counterparts. Using first-principles calculations, we demonstrate that equilibrium concentrations of point defects in the 2D perovskites PEA$_2$PbI$_4$, BA$_2$PbI$_4$, and PEA$_2$SnI$_4$ (PEA: phenethyl ammonium, BA: butylammonium), are much lower than in comparable 3D perovskites. Bonding disruptions by defects are more detrimental in 2D than in 3D networks, making defect formation energetically more costly. The stability of 2D Sn iodide perovskites can be further enhanced by alloying with Pb. Sh…
We report the synthesis and crystal structure of an organic inorganic compound, ethylenediammonium lead iodide, NH3CH2CH2NH3PbI4. Synchrotron based single crystal X-ray diffraction experiments revealed that the pristine and thermally treated crystals differ in the organic cation behaviour, which is characterized by a partial disorder in the thermally treated crystal. Based on current voltage measurements, increased disorder of the organic cation is associated with enhanced photoconductivity. This compound could be a potential candidate for interface engineering in lead halide perovskite-based …
Organic-inorganic hybrid perovskite architecture could serve as a robust platform for materials design to realize functionalities beyond photovoltaic applications. We explore caloric effects in organometal halide perovskites, taking methylammonium lead iodide (MAPbI$_3$) as an example, using all-atom molecular dynamics simulations with a first-principles based interatomic potential. The adiabatic thermal change is estimated directly by introducing different driving fields in the simulations. We find that MAPbI$_3$ exhibits both electrocaloric and mechanocaloric effects at room temperature. Loc…
Methylammonium lead iodide, as related organometal halide perovskites, emerged recently as a particularly attractive material for photovoltaic applications. The origin of its appealing properties is sometimes assigned to its potential ferroelectric character, which remains however a topic of intense debate. Here, we rationalize from first-principles calculations how the spatial arrangement of methylammonium polar molecules is progressively constrained by the subtle interplay between their tendency to bond with the inorganic framework and the appearance of iodine octahedra rotations inherent to…
The facile synthesis and electronic properties of two-dimensional hybrid organic-inorganic perovskites (2D HOIPs) make these self-assembled systems an important class of energy materials. The basic building blocks of these materials include inorganic lattice frameworks that often consist of lead-halide octahedra and organic molecules possessing ammonium functional groups. Understanding the coupling between the inorganic and organic layers is key to unraveling how the electronic properties of 2D HOIPs relate to their structures. In this work, we leverage Raman spectroscopy measurements and firs…
The defect tolerance nature of organic-inorganic hybrid perovskite is reflected from its stupendous growth in photovoltaic performances. The presence of lattice defect can manipulate or even gives rise to some exceptional properties which otherwise would have remained unseen. One of such properties reported in this article is the experimental observation of defect mediated room temperature ferromagnetism in methylammonium lead halide perovskite for the very first time, ably supported by ab-initio calculations. Theoretical analysis predicts the ferromagnetism principally arises from the iodide …
Hybrid halide perovskites such as methylammonium lead iodide (CH3NH3PbI3) exhibit unusually low free carrier concentrations despite being processed at low-temperatures from solution. We demonstrate, through quantum mechanical calculations, that the origin of this phenomenon is a prevalence of ionic over electronic disorder in stoichiometric materials. Schottky defect formation provides a mechanism to self-regulate the concentration of charge carriers through ionic compensation of charged point defects. The equilibrium charged vacancy concentration is predicted to exceed 0.4% at room temperatur…
Organic-inorganic hybrid perovskites (OIHPs) exhibiting exceptional photovoltaic and optoelectronic properties are of fundamental and practical interest, owing to their tunability and low manufacturing cost. For practical applications, however, challenges such as material instability and the photocurrent hysteresis occurring in perovskite solar cells under light exposure need to be understood and addressed. While extensive investigations have suggested that ion migration is a plausible origin of these detrimental effects, detailed understanding of the ion migration pathways remains elusive. He…
Dynamic Chemical Changes of Ti3C2Tx MXenes in Halide Perovskite Precursor Environments
Ben Gurion University of the Negev（内盖夫本-古里安大学）；The Alexander Kofkin Faculty of Engineering, Bar Ilan University（巴伊兰大学亚历山大·科夫金工程学院）；Ilse Katz Institute for Nanoscale Science and Technology, Ben-Gurion University of the Negev（内盖夫本-古里安大学伊尔斯·卡茨纳米科学与技术研究所）；Weizmann Institute of Science（魏茨曼科学研究所）
We present an ab initio simulation of $90^{\circ}$ ferroelastic twins that were recently observed in methyl ammonium lead iodide. There are two inequivalent types of $90^{\circ}$ walls that we calculate to act as either electron or hole sinks which suggests a possible route to enhancing charge carrier separation in photovoltaic devices. Despite separating non-polar domains, we show these walls to have a substantial in-plane polarisation of $\sim 6 \phantom{|} μ\text{C}\phantom{|}\text{cm}^{-2}$, due in part to flexoelectricity. We suggest this in turn could allow for the photoferroic effect an…
The chemical stability of methylammonium lead iodide (\ce{MAPbI3}) under humid conditions remains the primary challenge facing halide perovskite solar cells. We investigate defect processes in the water-intercalated iodide perovskite (\ce{MAPbI3}\_\ce{H2O}) and monohydrated phase (\ce{MAPbI3}$\cdot$\ce{H2O}) within a first-principles thermodynamic framework. We consider the formation energies of isolated and aggregated vacancy defects with different charge states under I-rich and I-poor conditions. It is found that a \ce{PbI2} (partial Schottky) vacancy complex can be formed readily, while the…
Organic-inorganic halide perovskites have been intensively re-investigated due to their applications, yet the opto-electronic function of the organic cation remains unclear. Through organic-selective resonant Auger electron spectroscopy measurements on well-defined single crystal surfaces, we find evidence for electronic coupling in the unoccupied states between the organic and inorganic sub-lattices of the prototypical hybrid perovskite, which is contrary to the notion based on previous studies that the organic cation is electronically inert. The coupling is relevant for electron dynamics in …
Solvent-solute interactions in precursor solutions of lead halide perovskites (LHP) critically impact the quality of solution-processed materials, as they lead to the formation of a variety of poly-iodoplumbates that act as building blocks for LHP. The formation of [PbI$_{2+n}$]$^{n-}$ complexes is often expected in diluted solutions while coordination occurring at high concentrations is not well understood yet. In a combined \textit{ab initio} and experimental work, we demonstrate that the optical spectra of the quasi-one-dimensional iodoplumbate complexes PbI$_2$(DMSO)$_4$, Pb$_2$I$_4$(DMSO)…
Organic-inorganic semiconductors, which adopt the perovskite crystal structure, have perturbed the landscape of contemporary photovoltaics research. In this Account, we discuss the internal motion of methylammonium lead iodide (CH$_3$NH$_3$PbI$_3$) and formamidinium lead iodide ([CH(NH$_2$)$_2$]PbI$_3$), covering: (i) molecular rotation-libration in the cuboctahedral cavity; (ii) drift and diffusion of large electron and hole polarons; (iii) transport of charged ionic defects. These processes give rise to a range of properties that are unconventional for photovoltaic materials, including frequ…
Organometal halide perovskites are promising solar-cell materials for next-generation photovoltaic applications. The long carrier lifetime and diffusion length of these materials make them very attractive for use in light absorbers and carrier transporters. While these aspects of organometal halide perovskites have attracted the most attention, the consequences of the Rashba effect, driven by strong spin-orbit coupling, on the photovoltaic properties of these materials are largely unexplored. In this work, taking the electronic structure of methylammonium lead iodide as an example, we propose …
We study the light-absorbing states of the mixed-halide perovskite CH$_{3}$NH$_{3}$PbI$_2$Cl and tri-iodide perovskite CH$_{3}$NH$_{3}$PbI$_3$ with density functional and many-body calculations to explain the desirable photovolatic features of these materials. The short-lived electron-hole bound states produced in this photovoltaic material are of halide to lead electron transfer character, with a Wannier-type exciton. Bethe-Salpeter (GW+BSE) calculations of the absorption cross section reveal strong screening of the electron-hole interaction. The atomic character of the exciton retains ligand…
Mixed-halide based hybrid perovskite semiconductors have attracted tremendous attention as a promising candidate for high efficient photovoltaic and light-emitting devices. However, these advanced perovskite materials may undergo phase segregation under light illumination due to halide ion migration, affecting their optoelectronic properties. Here, we report photo-excitation induced phase segregation in triple-cation mixed-halide perovskite films that yields to red-shift in photoluminescence response. We demonstrate that photo-excitation induced halide ion migration leads to the formation of s…
Organic-inorganic hybrid perovskites such as methylammonium lead iodide (CH3NH3PbI3) are game-changing semiconductors for solar cells and light-emitting devices owing to their exceptionally long carrier lifetime and diffusion length. Determining whether the large dipole moment of the organic cation and dynamic disorder benefit the optoelectronic properties of CH3NH3PbI3 has been an outstanding challenge. Herein, via transient absorption measurements employing an infrared pump pulse tuned to a methylammonium vibration, we observe slow, nanosecond-long thermal dissipation from the selectively ex…
Organolead halide perovskites are a family of hybrid organic-inorganic compounds whose remarkable optoelectronic properties have been under intensive scrutiny in recent years. Here we use inelastic X-ray scattering to study low-energy lattice excitations in single crystals of methylammonium lead iodide and bromide perovskites. Our findings confirm the displacive nature of the cubic-to-tetragonal phase transition, which is further shown, using neutron and x-ray diffraction, to be close to a tricritical point. Lastly, we detect quasistatic symmetry-breaking nanodomains persisting well into the h…
Metal halide perovskites (MHPs) are nowadays one of the most studied semiconductors due to their exceptional performance as active layers in solar cells. Although MHPs are excellent solid-state semiconductors, they are also ionic compounds, where ion migration plays a decisive role in their formation, their photovoltaic performance and their long-term stability. Given the above-mentioned complexity, molecular dynamics simulations based on classical force fields are especially suited to study MHP properties, such as lattice dynamics and ion migration. In particular, the possibility to model mix…
The long carrier lifetime and defect tolerance in metal halide perovskites (MHPs) are major contributors to the superb performance of MHP optoelectronic devices. Large polarons were reported to be responsible for the long carrier lifetime. Yet microscopic mechanisms of the large polaron formation including the so-called phonon melting, are still under debate. Here, time-of-flight (TOF) inelastic neutron scattering (INS) experiments and first-principles density-functional theory (DFT) calculations were employed to investigate the lattice vibrations (or phonon dynamics) in methylammonium lead io…
In a combined theoretical and experimental work, we investigate X-ray Absorption Near-Edge Structure (XANES) spectroscopy of the I $L_3$ and the Pb $M_5$ edges of the methylammonium lead iodide ($\textrm{MAPbI}_3$) hybrid inorganic-organic perovskite and its binary phase $\textrm{PbI}_2$. The absorption onsets are dominated by bound excitons with sizable binding energies of a few hundred meV and pronounced anisotropy. The spectra of both materials exhibit remarkable similarities, suggesting that the fingerprints of core excitations in $\textrm{MAPbI}_3$ are essentially given by its inorganic c…
Photo- and charge-carrier induced ion migration is a major challenge when utilizing metal halide perovskite semiconductors for optoelectronic applications. For mixed iodide/bromide perovskites, the compositional instability due to light- or electrical bias induced phase- segregation restricts the exploitation of the entire bandgap range. Previous experimental and theoretical work suggests that excited states or charge-carriers trigger the process but the exact mechanism is still under debate. To identify the mechanism and cause of light-induced phase-segregation phenomena we investigate the fu…
The lead-free halide double perovskite class of materials offers a promising venue for resolving issues related to toxicity of Pb and long-term stability of the lead-containing halide perovskites. We present a first-principles study of the lattice vibrations in Cs$_2$AgBiBr$_6$ , the prototypical compound in this class, and show that the lattice dynamics of Cs$_2$AgBiBr$_6$ is highly anharmonic, largely in regards to tilting of AgBr$_6$ and BiBr$_6$ octahedra. Using an energy and temperature dependent phonon spectral function, we then show how the experimentally observed cubic-to-tetragonal ph…
The zero-dimensional (0D) metal halides comprise periodically distributed and isolated metal-halide polyhedra, which act as the smallest inorganic quantum systems and can accommodate quasi-localized Frenkel excitons. These excitons exhibit unique photophysics including broadband photon emission, huge Stokes shift, and long decay lifetime. The polyhedra can have different symmetries due to the coordination degree of the metal ions. Little is known about how the polyhedron type affects the characteristics of the 0D metal halide crystals. We synthesize and comparatively study three novel kinds of…
In band-like semiconductors, charge carriers form a thermal energy distribution rapidly after optical excitation. In hybrid lead halide perovskites, the cooling of such thermal carrier distributions occurs on timescales of ~300 fs via carrier-phonon scattering. However, the initial build-up of the thermal distribution proved difficult to resolve with pump-probe techniques due to the requirement of high resolution, both in time and in energy. Here, we use two-dimensional electronic spectroscopy with sub-10fs resolution to directly observe the carrier interactions that lead to the formation of a…
Methylammonium lead iodide perovskites are considered direct bandgap semiconductors. Here we show that in fact they present a weakly indirect bandgap 60 meV below the direct bandgap transition. This is a consequence of spin-orbit coupling resulting in Rashba-splitting of the conduction band. The indirect nature of the bandgap explains the apparent contradiction of strong absorption and long charge carrier lifetime. Under hydrostatic pressure from ambient to 325 MPa, Rashba splitting is reduced due to a pressure induced ordering of the crystal structure. The nature of the bandgap becomes increa…
In the last decade, hybrid organic-inorganic halide perovskites have emerged as a new type of semiconductor for photovoltaics and other optoelectronic applications. Unlike standard, tetrahedrally bonded semiconductors (e.g. Si and GaAs), the ionic thermal fluctuations in the halide perovskites (i.e. structural dynamics) are strongly coupled to the electronic dynamics. Therefore, it is crucial to obtain accurate and detailed knowledge about the nature of atomic motions within the crystal. This has proved to be challenging due to low thermal stability and the complex, temperature dependent struc…
In spite of the key role of hydrogen bonding in the structural stabilization of the prototypic hybrid halide perovskite, CH3NH3PbI3 (MAPbI3), little progress has been made in our in-depth understanding of the hydrogen-bonding interaction between the MA+-ion and the iodide ions in the PbI6-octahedron network. Herein, we show that there exist two distinct types of the hydrogen-bonding interaction, naming a- and b-modes, in the tetragonal MAPbI3 on the basis of symmetry argument and density-functional theory calculations. The computed Kohn-Sham (K-S) energy difference between these two interactio…
We report a structural reconstruction-induced high photoluminescence quantum yield of 25% in colloidal two-dimensional tin iodide nanosheets that are synthesized by a hot-injection method. The as-synthesized red-colored nanosheets of octylammonium tin iodide perovskites at room temperature transform to white hexagonal nanosheets upon washing or exposure to light. This structural change increases the bandgap from 2.0 eV to 3.0 eV, inducing a large Stokes shift and a broadband emission. Further, a long photoluminescence lifetime of about 1 microsecond is measured for the nanosheets. Such long-li…
We have studied the prototype hybrid organic-inorganic perovskite CH3NH3PbI3 and its three close relatives, CH3NH3SnI3, CH3NH3PbCl3 and CsPbI3, using relativistic density function theory. The long-range van der Waals (vdW) interactions were incorporated into the Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional using the Tkatchenko-Scheffler pairwise scheme. Our results reveal that hydrogen bonding, which is well described by the PBE functional, plays a decisive role for the structural parameters of these systems, including the position and orientation of the organic cation as well …
Much recent attention has been devoted towards unravelling the microscopic optoelectronic properties of hybrid organic-inorganic perovskites (HOP). Here we investigate by coherent inelastic neutron scattering spectroscopy and Brillouin light scattering, low frequency acoustic phonons in four different hybrid perovskite single crystals: MAPbBr$_3$, FAPbBr$_3$, MAPbI$_3$ and $α$-FAPbI$_3$ (MA: methylammonium, FA: formamidinium). We report a complete set of elastic constants caracterized by a very soft shear modulus C$_{44}$. Further, a tendency towards an incipient ferroelastic transition is obs…
A method for improving the efficiency of solar cells is combining a low-bandgap semiconductor with a singlet fission material (which converts one high energy singlet into two low energy triplets following photoexcitation). Here we present a study of the interface between singlet fission molecules and low-bandgap halide pervoskites. We briefly show a range of experiments screening for triplet transfer into a halide perovskite. However, in all cases triplet transfer was not observed. This motivated us to understand the halide perovskite/singlet fission interface better by carrying out first-prin…
Metal halide perovskites exhibit a materials physics that is distinct from traditional inorganic and organic semiconductors. While materials such as CH3NH3PbI3 are non-magnetic, the presence of heavy elements (Pb and I) in a non-centrosymmetric crystal environment result in a significant spin-splitting of the frontier electronic bands through the Rashba-Dresselhaus effect. We show, from a combination of \textit{ab initio} molecular dynamics, density-functional theory, and relativistic quasi-particle \textit{GW} theory, that the nature (magnitude and orientation) of the band splitting depends o…
Hybrid organic-inorganic semiconductors feature complex lattice dynamics due to the ionic character of the crystal and the softness arising from non-covalent bonds between molecular moieties and the inorganic network. Here we establish that such dynamic structural complexity in a prototypical two-dimensional lead iodide perovskite gives rise to the coexistence of diverse excitonic resonances, each with a distinct degree of polaronic character. By means of high-resolution resonant impulsive stimulated Raman spectroscopy, we identify vibrational wavepacket dynamics that evolve along different co…
The hybrid halide perovskite CH3NH3PbI3 exhibits a complex structural behaviour, with successive transitions between orthorhombic, tetragonal and cubic polymorphs at ca. 165 K and 327 K. Herein we report first-principles lattice dynamics (phonon spectrum) for each phase of CH3NH3PbI3. The equilibrium structures compare well to solutions of temperature-dependent powder neutron diffraction. By following the normal modes we calculate infrared and Raman intensities of the vibrations, and compare them to the measurement of a single crystal where the Raman laser is controlled to avoid degradation of…
The speed of sound and elastic properties of single crystals of inorganic and hybrid lead-free iodide perovskites obtained by femtosecond transient optical reflectivity
Defects in halide perovskites play an essential role in determining the efficiency and stability of the resulting optoelectronic devices. Here, we present a systematic study of intrinsic point defects in six primary metal halide perovskites, MAPbI$_3$, MAPbBr$_3$, MAPbCl$_3$, FAPbI$_3$, CsPbI$_3$ and MASnI$_3$, using density functional theory calculations with the SCAN+rVV10 functional. We analyse the impact of changing anions and cations on the defect formation energies and the charge state transitions levels and identify the physical origins underlying the observed trends. Dominant defects i…
Environmental effects and intrinsic energy-loss processes lead to fluctuations in the operational temperature of solar cells, which can profoundly influence their power conversion efficiency. Here we determine from first principles the effects of temperature on the band gap and band edges of the hybrid pervoskite CH$_3$NH$_3$PbI$_3$ by accounting for electron-phonon coupling and thermal expansion. From $290$ to $380$ K, the computed band gap change of $40$ meV coincides with the experimental change of $30$-$40$ meV. The calculation of electron-phonon coupling in CH$_3$NH$_3$PbI$_3$ is particul…
Single crystals of the methylammonium (MA) lead halides MAPbI3, MAPbBr3, and MAPbCl3 have been investigated using infrared spectroscopy with the aim of analyzing structural and dynamical aspects of processes that enable the ordering of the MA molecule in the orthorhombic crystal structure of these hybrid perovskites. Our temperature-dependent studies were focused on the analysis of the CH/NH rocking, C-N stretching, and CH/NH bending modes of the MA molecule in the 800-1750 cm-1 frequency range. They deliver a direct comparison of the behavior of the three halides on crossing the orthorhombic-…
