Gravitational wave (GW) searches using pulsar timing arrays (PTAs) are assumed to be limited by the typical average observational cadence of $1/(2~{\rm weeks})$ for a single pulsar to GW frequencies $\lesssim 4\times 10^{-7}$ Hz. We show that this assumption is incorrect and that a PTA can detect signals with much higher frequencies, which are preserved in the data due to aliasing, by exploiting asynchronous observations from multiple pulsars. This allows an observation strategy that is scalable to future large-scale PTAs containing $O(10^3)$ pulsars, enabled by the Five-hundred meter Aperture Spherical Telescope and the Square Kilometer Array, without requiring a higher per-pulsar observation cadence. We show that higher frequency GW observations, reaching up to $4\times 10^{-4}$ Hz with an SKA-era PTA, have significant astrophysical implications, such as (i) a three orders of magnitude better constraint than current high-cadence observations on GW strain in the $[10,400]$ $μ{\rm Hz}$ band, and (ii) sensitive tests of the no-hair theorem in the mass range of supermassive black hole binaries using their inspiral, merger, and ringdown signals.
Complementary to ground-based laser interferometers, pulsar timing array experiments are being carried out to search for nanohertz gravitational waves. Using the world's most powerful radio telescopes, three major international collaborations have collected $\sim$10-year high precision timing data for tens of millisecond pulsars. In this paper we give an overview on pulsar timing experiments, gravitational wave detection in the nanohertz regime, and recent results obtained by various timing array projects.
An understanding of pulsar timing noise offers the potential to improve the timing precision of a large number of pulsars as well as facilitating our understanding of pulsar magnetospheres. For some sources, timing noise is attributable to a pulsar switching between two different spin-down rates $(\dotν)$. Such transitions may be common but difficult to resolve using current techniques. In this work, we use simulations of $\dotν$-variable pulsars to investigate the likelihood of resolving individual $\dotν$ transitions. We inject step-changes in the value of $\dotν$ with a wide range of amplit…
The maximum frequency of gravitational waves (GWs) detectable with traditional pulsar timing methods is set by the Nyquist frequency ($f_{\rm{Ny}}$) of the observation. Beyond this frequency, GWs leave no temporal-correlated signals; instead, they appear as white noise in the timing residuals. The variance of the GW-induced white noise is a function of the position of the pulsars relative to the GW source. By observing this unique functional form in the timing data, we propose that we can detect GWs of frequency $>$ $f_{\rm{Ny}}$ (super-Nyquist frequency GWs; SNFGWs). We demonstrate the feasib…
We present a principal component analysis method which tracks and compensates for short-timescale variability in pulsar profiles, with a goal of improving pulsar timing precision. We couple this with a fast likelihood technique for determining pulse time of arrival, marginalizing over the principal component amplitudes. This allows accurate estimation of timing errors in the presence of pulsar variability. We apply the algorithm to the slow pulsar PSR J2139+0040 using an archived set of untargeted raster-scan observations at arbitrary epochs across four years, obtaining an improved timing solu…
A pulsar timing array (PTA) refers to a program of regular, high-precision timing observations of a widely distributed array of millisecond pulsars. Here we review the status of the three primary PTA projects and the joint International Pulsar Timing Array project. We discuss current results related to ultra-low-frequency gravitational wave searches and highlight opportunities for the near future.
The sensitivity of pulsar timing arrays to gravitational waves is, at some level, limited by timing noise. Red timing noise - the stochastic wandering of pulse arrival times with a red spectrum - is prevalent in slow-spinning pulsars and has been identified in many millisecond pulsars. Phenomenological models of timing noise, such as from superfluid turbulence, suggest that the timing noise spectrum plateaus below some critical frequency, $f_c$, potentially aiding the hunt for gravitational waves. We examine this effect for individual pulsars by calculating minimum observation times, $T_{\rm m…
To successfully detect gravitational waves with pulsar timing arrays, we need to have a comprehensive understanding of the physical origins and statistical characteristics of the noise in pulse arrival times and identify mitigation methods to reduce the noise. In this paper we will review radiometer noise, phase jitter noise and timing noise in the noise budget of pulsar timing and show various efforts used to reduce them. We will briefly discuss the results of an overall assessment of the components and physical causes of the timing residuals for millisecond pulsars in the North American Nano…
Pulsar Timing Arrays use a set of millisecond pulsars in an attempt to directly detect nanohertz gravitational waves. For this purpose, high precision timing of the pulsars is essential and ultimately a precision of the order of ~100 ns is required. Propagation effects in the interstellar medium cause the radio emission from a pulsar to be dispersed and scattered, introducing time variable delays of the pulses on their way to Earth. If these delays are not properly corrected for, they may cause significant errors in the timing analysis of a pulsar. These proceedings will review the effects of …
We present timing models for 20 millisecond pulsars in the Parkes Pulsar Timing Array. The precision of the parameter measurements in these models has been improved over earlier results by using longer data sets and modelling the non-stationary noise. We describe a new noise modelling procedure and demonstrate its effectiveness using simulated data. Our methodology includes the addition of annual dispersion measure (DM) variations to the timing models of some pulsars. We present the first significant parallax measurements for PSRs J1024-0719, J1045-4509, J1600-3053, J1603-7202, and J1730-2304,…
Precision astrometry is an integral component of successful pulsar timing campaigns. Astrometric parameters are commonly derived by fitting them as parameters of a timing model to a series of pulse times of arrival (TOAs). TOAs measured to microsecond precision over several-year spans can yield position measurements with sub-milliarcsecond precision. However, timing-based astrometry can become biased if a pulsar displays any red spin noise, which can be compared to the red noise signal produced by the stochastic gravitational wave background. We investigate how noise of different spectral type…
There are two types of timing irregularities seen in pulsars: glitches and timing noise. Both of these phenomena can help us probe the interior of such exotic objects. This article presents a brief overview of the observational and theoretical aspects of pulsar timing irregularities and the main results from the investigations of these phenomena in India. The relevance of such Indian programs for monitoring of young pulsars with the Square Kilometer Array (SKA) is presented, highlighting possible contributions of the Indian neutron star community to the upcoming SKA endeavour.
Pulsar timing is a technique that uses the highly stable spin periods of neutron stars to investigate a wide range of topics in physics and astrophysics. Pulsar timing arrays (PTAs) use sets of extremely well-timed pulsars as a Galaxy-scale detector with arms extending between Earth and each pulsar in the array. These challenging experiments look for correlated deviations in the pulsars' timing that are caused by low-frequency gravitational waves (GWs) traversing our Galaxy. PTAs are particularly sensitive to GWs at nanohertz frequencies, which makes them complementary to other space- and grou…
The Five-hundred-meter Aperture Spherical Telescope (FAST) will become one of the world-leading telescopes for pulsar timing array (PTA) research. The primary goals for PTAs are to detect (and subsequently study) ultra-low-frequency gravitational waves, to develop a pulsar-based time standard and to improve solar system planetary ephemerides. FAST will have the sensitivity to observe known pulsars with significantly improved signal-to-noise ratios and will discover a large number of currently unknown pulsars. We describe how FAST will contribute to PTA research and show that jitter- and timing…
At the highest levels of pulsar timing precision achieved to date, experiments are limited by noise intrinsic to the pulsar. This stochastic wideband impulse modulated self-noise (SWIMS) limits pulsar timing precision by randomly biasing the measured times of arrival and thus increasing the root mean square (rms) timing residual. We discuss an improved methodology of removing this bias in the measured times of arrival by including information about polarized radiation. Observations of J0437-4715 made over a one-week interval at the Parkes Observatory are used to demonstrate a nearly 40 per cen…
Gravitational wave bursts produced by supermassive binary black hole mergers will leave a persistent imprint on the space-time metric. Such gravitational wave memory signals are detectable by pulsar timing arrays as a glitch event that would seem to occur simultaneously for all pulsars. In this paper, we describe an initial algorithm which can be used to search for gravitational wave memory signals. We apply this algorithm to the Parkes Pulsar Timing Array data set. No significant gravitational wave memory signal is founded in the data set.
Modeling of frequency-dependent effects, contributed by the turbulence in the free electron density of interstellar plasma, is required to enable the detection of the expected imprints from the stochastic gravitational-wave (GW) background in pulsar timing data. In this work, we present an investigation of temporal variations of interstellar medium for a set of millisecond pulsars (MSPs) with the upgraded GMRT aided by large fractional bandwidth at lower observing frequencies. Contrary to the conventional narrow-band analysis using a frequency invariant template profile, we applied $PulsePortr…
Pulsar Timing Array (PTA) experiments exploit the clock-like behaviour of an array of millisecond pulsars, with the goal of detecting low-frequency gravitational waves. PTA experiments have been in operation over the last decade, led by groups in Europe, Australia, and North America. These experiments use the most sensitive radio telescopes in the world, extremely precise pulsar timing models and sophisticated detection algorithms to increase the sensitivity of PTAs. No detection of gravitational waves has been made to date with this technique, but PTA upper limits already contributed to rule …
Pulsar timing experiments are currently searching for gravitational waves, and this dissertation focuses on the development and study of the pulsar timing residual models used for continuous wave searches. The first goal of this work is to re-present much of the fundamental physics and mathematics concepts behind the calculations and theory used in pulsar timing. While there exist many reference sources in the literature, I try to offer a fully self-contained explanation of the fundamentals of this research which I hope the reader will find helpful. The next goal broadly speaking has been to f…
The European Pulsar Timing Array (EPTA) is a multi-institutional, multi-telescope collaboration, with the goal of using high-precision pulsar timing to directly detect gravitational waves. In this article we discuss the EPTA member telescopes, current achieved timing precision, and near-future goals. We report a preliminary upper limit to the amplitude of a gravitational wave background. We also discuss the Large European Array for Pulsars, in which the five major European telescopes involved in pulsar timing will be combined to provide a coherent array that will give similar sensitivity to th…
A Realistic Pulsar -- Supermassive Black Hole Timing Model
Peking University（北京大学）；Kavli Institute for Astronomy and Astrophysics, Peking University（北京大学科维理天文与天体物理研究所）；National Astronomical Observatories, Chinese Academy of Sciences（中国科学院国家天文台）
A "pulsar timing array" (PTA), in which observations of a large sample of pulsars spread across the celestial sphere are combined, allows investigation of "global" phenomena such as a background of gravitational waves or instabilities in atomic timescales that produce correlated timing residuals in the pulsars of the array. The Parkes Pulsar Timing Array (PPTA) is an implementation of the PTA concept based on observations with the Parkes 64-m radio telescope. A sample of 20 millisecond pulsars is being observed at three radio-frequency bands, 50cm (~700 MHz), 20cm (~1400 MHz) and 10cm (~3100 M…
In the past five years, approximately one third of the 65 pulsars discovered by radio observations of Fermi unassociated sources are black widow pulsars (BWPs). BWPs are binary millisecond pulsars with companion masses ranging from 0.01-0.1 solar masses which often exhibit radio eclipses. The bloated companions in BWP systems exert small torques on the system causing the orbit to change on small but measurable time scales. Because adding parameters to a timing model reduces sensitivity to a gravitational wave (GW) signal, the need to fit many orbital frequency derivatives to the timing data is…
General relativity has predicted the existence of gravitational waves (GW), which are waves of the distortions of space-time with two degrees of polarization and the propagation speed of light. Alternative theories predict more polarizations, up to a maximum of six, and possible deviation of propagation speed from the light speed. The present paper reviews recent proposals to test the gravity theories in the radiation regime by observing GWs using pulsar timing arrays.
Pulsars are remarkably precise "celestial clocks" that can be used to explore many different aspects of physics and astrophysics. In this article I give a brief summary of pulsar properties and describe some of the applications of pulsar timing, including tests of theories of gravitation, efforts to detect low-frequency gravitational waves using pulsar timing arrays and establishment a "pulsar timescale".
Nancay radiotelescope is involved in high precision timing since 20 years. Since 2004, a coherent dedispersion instrumentation enables numerous routine observations on more than 200 pulsars using half of the time if this 100-meters class radiotelescope. Two main programs are currently conducted. A large set of young and old pulsars is timed for a multi-wavelength approach, complementary to the very successful high energy observations of pulsars done by FERMI. A set of highly stable millisecond pulsars is monitored as our contribution to the European Pulsar Timing Array in order to probe the co…
Vanderbilt University（范德堡大学）；OzGrav: The ARC Center of Excellence for Gravitational Wave Discovery（ARC引力波发现卓越中心）；Swinburne University of Technology（斯威本科技大学）；LPC2E, OSUC, Univ Orleans, CNRS（奥尔良大学CNRS LPC2E实验室）；Max Planck Institute for Gravitational Physics (Albert Einstein Institute)（马克斯·普朗克引力物理学研究所（爱因斯坦研究所））；Leibniz Universität Hannover（汉诺威莱布尼茨大学）；Jodrell Bank Centre for Astrophysics, Department of Physics and Astronomy, University of Manchester（曼彻斯特大学天体物理学与天文学系乔德雷尔银行天体物理中心）
Millisecond pulsars are intrinsically very stable clocks and precise measurement of their observed pulse periods can be used to study a wide variety of astrophysical phenomena. In particular, observations of a large sample of millisecond pulsars at regular intervals, constituting a Pulsar Timing Array (PTA), can be used as a detector of low-frequency gravitational waves and to establish a standard of time independent of terrestrial atomic timescales. Three major timing array projects have been established: The European Pulsar Timing Array (EPTA), the North American pulsar timing array (NANOGra…
We present the first 2.5 years of data from the MeerKAT Pulsar Timing Array (MPTA), part of MeerTime, a MeerKAT Large Survey Project. The MPTA aims to precisely measure pulse arrival times from an ensemble of 88 pulsars visible from the Southern Hemisphere, with the goal of contributing to the search, detection and study of nanohertz-frequency gravitational waves as part of the International Pulsar Timing Array. This project makes use of the MeerKAT telescope, and operates with a typical observing cadence of two weeks using the L-band receiver that records data from 856-1712 MHz. We provide a …
Highly precise pulsar timing is very important for understanding the nature of a neutron star, and it can even be used to detect gravitational waves. Unfortunately, the accuracy of the pulsar timing is seriously affected by the spin-down irregularities of pulsars.
The phenomenal rotational stability of millisecond pulsars allows them to be used as precise celestial clocks. An array of these pulsars can be exploited to search for correlated perturbations in their pulse times of arrival due to gravitational waves. Here, I describe the observations and analysis necessary to accomplish this goal and present an overview of the efforts of the worldwide pulsar timing community. Due to a growing number of millisecond pulsar discoveries, improved instrumentation, and growing timespans of observation, the sensitivity of our pulsar timing array experiments is expe…
The aims of the Parkes Pulsar Timing Array (PPTA) project are to 1) make a direct detection of gravitational waves, 2) improve the solar system planetary ephemeris and 3) develop a pulsar-based time scale. In this article we describe the project, explain how the data are collected and processed and describe current research. Our current data sets are able to place an upper bound on the gravitational wave background that is the most stringent to date.
We present an overview of precise pulsar timing using data from the Large Area Telescope (LAT) on Fermi. We describe the analysis techniques including a maximum likelihood method for determining pulse times of arrival from unbinned photon data. In addition to determining the spindown behavior of the pulsars and detecting glitches and timing noise, such timing analyses allow the precise determination of the pulsar position, thus enabling detailed multiwavelength follow up.
The pulsar timing residuals induced by gravitational waves from non-evolving single binary sources are affected by many parameters related to the relative positions of the pulsar and the gravitational wave sources. We will fully analyze the effects due to different parameters one by one. The standard deviations of the timing residuals will be calculated with a variable parameter fixing a set of other parameters. The orbits of the binary sources will be generally assumed to be elliptical. The influences of different eccentricities on the pulsar timing residuals will also studied in detail. We f…
We analyze timing noise from five years of Arecibo and Green Bank observations of the seventeen millisecond pulsars of the North-American Nanohertz Observatory for Gravitational Waves (NANOGrav) pulsar timing array. The weighted autocovariance of the timing residuals was computed for each pulsar and compared against two possible models for the underlying noise process. The first model includes red noise and predicts the autocovariance to be a decaying exponential as a function of time lag. The second model is Gaussian white noise whose autocovariance would be a delta function. We also perform …
Though pulsars spin regularly, the differences between the observed and predicted ToA (time of arrival), known as "timing noise", can still reach a few milliseconds or more. We try to understand the noise in this paper. As proposed by Xu & Qiao in 2001, both dipole radiation and particle emission would result in pulsar braking. Accordingly, possible fluctuation of particle current flow is suggested here to contribute significant ToA variation of pulsars. We find that the particle emission fluctuation could lead to timing noise which can't be eliminated in timing process, and that a longer peri…
We investigate the impact of intrinsic, kinematic and gravitational effects on high precision pulsar timing. We present an analytical derivation and a numerical computation of the impact of these effects on the first and second derivative of the pulsar spin frequency. In addition, in the presence of white noise, we derive an expression to determine the expected measurement uncertainty of a second derivative of the spin frequency for a given timing precision, observing cadence and timing baseline and find that it strongly depends on the latter ($\propto t^{-7/2}$). We show that for pulsars with…
Young pulsars deviate from a perfectly regular spin-down by two non-deterministic phenomena: impulsive glitches and timing noise. Both phenomena are interesting per se, and may provide insights into the superfluid properties of neutron stars, but they also act as a barrier to high-precision pulsar timing and gravitational wave experiments. We study a minimal stochastic model to describe the spin-down of a multicomponent neutron star, with fluctuations in both the internal and external torques. The power spectral density and timing noise strength of this kind of model can be obtained analytical…
Gravitational waves provide a new probe of the Universe which can reveal a number of cosmological and astrophysical phenomena that cannot be observed by electromagnetic waves. Different frequencies of gravitational waves are detected by different means. Among them, precision measurements of pulsar timing provides a natural detector for gravitational waves with light-year scale wavelengths. In this review, first a basic framework to detect a stochastic gravitational wave background using pulsar timing array is introduced, and then possible interpretations of the latest observational result of 1…
We aim to resolve a misunderstanding about whether the so-called "Earth term" in the pulsar timing response to a gravitational wave is in phase among a set of pulsars. We note that the misunderstanding has potentially arisen from the statements that the Earth term is "coherent" or "builds up coherently" among the pulsars. We clarify what authors mean by "coherent" in these statements, pointing out that "coherent" does not indicate that the Earth terms are in phase among the pulsars. Using the pulsar timing residuals induced by a continuous gravitational wave, we show that the Earth term does n…
The smooth spin-down of young pulsars is perturbed by two non-deterministic phenomenon, glitches and timing noise. Although the timing noise provides insights into nuclear and plasma physics at extreme densities, it acts as a barrier to high-precision pulsar timing experiments. An improved methodology based on Bayesian inference is developed to simultaneously model the stochastic and deterministic parameters for a sample of 85 high-$\dot{E}$ radio pulsars observed for $\sim$ 10 years with the 64-m Parkes radio telescope. Timing noise is known to be a red process and we develop a parametrizatio…
While pulsars possess exceptional rotational stability, large scale timing studies have revealed at least two distinct types of irregularities in their rotation: red timing noise and glitches. Using modern Bayesian techniques, we investigated the timing noise properties of 300 bright southern-sky radio pulsars that have been observed over 1.0-4.8 years by the upgraded Molonglo Observatory Synthesis Telescope (MOST). We reanalysed the spin and spin-down changes associated with nine previously reported pulsar glitches, report the discovery of three new glitches and four unusual glitch-like event…
We investigate the capability of pulsar timing arrays (PTAs) as a probe of primordial black holes (PBHs), which might constitute the Galactic dark matter. A PBH passing nearby the Earth or a pulsar gives an impulse acceleration and induces residuals on otherwise orderly pulsar timing data. We show that the timing residuals induced at pulsars are optimal for searching heavier PBHs than those at the Earth, and the two probes are highly complemental. Future facilities like SKA could detect PBHs with masses around 10^(22-28) g even if only a small fraction (< 1%) of the Galactic dark matter consis…
We have constructed timing solutions for 81 gamma-ray pulsars covering more than five years of Fermi data. The sample includes 37 radio-quiet or radio-faint pulsars which cannot be timed with other telescopes. These timing solutions and the corresponding pulse times of arrival are prerequisites for further study, e.g. phase-resolved spectroscopy or searches for mode switches. Many gamma-ray pulsars are strongly affected by timing noise, and we present a new method for characterizing the noise process and mitigating its effects on other facets of the timing model. We present an analysis of timi…
Radio pulsars are often used as clocks in a wide variety of experiments. Imperfections in the clock, known as timing noise, have the potential to reduce the significance of, or even thwart e.g. the attempt to find a stochastic gravitational wave (GW) background. We measure the timing noise in a group of 129 mostly middle-aged pulsars (i.e. characterstic ages near 1~Myr) observed with the Parkes radio telescope on a monthly basis since 2014. We examine four different metrics for timing noise, but it remains unclear which, if any, provides the best determination. In spite of this, it is evident …
Pulsar timing arrays (PTAs) will be sensitive to a finite number of gravitational wave (GW) "point" sources (e.g. supermassive black hole binaries). N quiet pulsars with accurately known distances d_{pulsar} can characterize up to 2N/7 distant chirping sources per frequency bin Δf_{gw}=1/T, and localize them with "diffraction limited" precision δθ\gtrsim (1/SNR)(λ_{gw}/d_{pulsar}). Even if the pulsar distances are poorly known, a PTA with F frequency bins can still characterize up to (2N/7)[1-(1/2F)] sources per bin, and the quasi-singular pattern of timing residuals in the vicinity of a GW so…
The main goal of pulsar timing array experiments is to detect correlated signals such as nanohertz-frequency gravitational waves. Pulsar timing data collected in dense monitoring campaigns can also be used to study the stars themselves, their binary companions, and the intervening ionised interstellar medium. Timing observations are extraordinarily sensitive to changes in path length between the pulsar and the Earth, enabling precise measurements of the pulsar positions, distances and velocities, and the shapes of their orbits. Here we present a timing analysis of 25 pulsars observed as part o…
We examine timing noise in both magnetars and regular pulsars, and find that there exists a component of the timing noise with strong magnetic field dependence above B ~ 10^{12.5} G. The dependence of the timing noise floor on the magnetic field is also reflected in the smallest observable glitch size. We find that magnetospheric torque variation cannot explain this component of timing noise. We calculate the moment of inertia of the magnetic field outside of a neutron star and show that this timing noise component may be due to variation of this moment of inertia, and could be evidence of rap…
Gravitational scattering events, in which the path of an interstellar object is deflected by a pulsar or the solar system, give rise to reflex motion which can potentially be detected using pulsar timing. We determine the form of the timing signal expected from a gravitational scattering event, which is ramp-like and resembles the signal produced by a glitch or a gravitational wave burst with memory (BWM), and investigate the prospects for detecting such a signal using a pulsar timing array. The level of timing precision currently achieved for some millisecond pulsars makes it possible to dete…
We have used the Nanshan 25-m Radio Telescope at Xinjiang Astronomical Observatory to obtain timing observations of 87 pulsars from 2002 July to 2014 March. Using the "Cholesky" timing analysis method we have determined positions and proper motions for 48 pulsars, 24 of which are improved positions compared to previously published values. We also present the first published proper motions for nine pulsars and improved proper motions for 21 pulsars using pulsar timing and position comparison method. The pulsar rotation parameters are derived and are more accurate than previously published value…
Radio timing observations of a millisecond pulsar in orbit around the Galactic centre black hole (BH) or a BH at the centre of globular clusters could answer foundational questions in astrophysics and fundamental physics. Pulsar radio astronomy typically employs the post-Keplerian approximation to determine the system parameters. However, in the strong gravitational field around the central BH, higher order relativistic effects may become important. We compare the pulsar timing delays given by the post-Keplerian approximation with those given by a relativistic timing model. We find significant…
Efforts are underway to use high-precision timing of pulsars in order to detect low-frequency gravitational waves. A limit to this technique is the timing noise generated by dispersion in the plasma along the line of sight to the pulsar, including the solar wind. The effects due to the solar wind vary with time, influenced by the change in solar activity on different time scales, ranging up to $\sim 11$ years for a solar cycle. The solar wind contribution depends strongly on the angle between the pulsar line of sight and the solar disk, and is a dominant effect at small separations. Although s…
Pulsar's position, proper motion and parallax are important parameters in timing equations. It is a really challenging work to fit astrometric parameters accurately through pulsar timing, especially for pulsars that show irregular timing properties. As the fast development of related techniques, it is possible to measure astrometric parameters of more and more pulsars in a model$\textrm{-}$independent manner with the Very Long Baseline Interferometry (VLBI). In this work, we select 16 normal pulsars, whose parallax and proper motion have not been successfully fitted with timing observations or…
