We propose a new framework to design controllers for high-dimensional nonlinear systems. The control is designed through the iterative linear quadratic regulator (ILQR), an algorithm that computes control by iteratively applying the linear quadratic regulator on the local linearization of the system at each time step. Since ILQR is computationally expensive, we propose to first construct reduced-order models (ROMs) of the high-dimensional nonlinear system. We derive nonlinear ROMs via projection, where the basis is computed via balanced truncation (BT) and LQG balanced truncation (LQG-BT). Numerical experiments are performed on a semi-discretized nonlinear Burgers equation. We find that the ILQR algorithm produces good control on ROMs constructed either by BT or LQG-BT, with BT-ROM based controllers outperforming LQG-BT slightly for very low-dimensional systems.
This paper proposes a data-driven model reduction approach on the basis of noisy data. Firstly, the concept of data reduction is introduced. In particular, we show that the set of reduced-order models obtained by applying a Petrov-Galerkin projection to all systems explaining the data characterized in a large-dimensional quadratic matrix inequality (QMI) can again be characterized in a lower-dimensional QMI. Next, we develop a data-driven generalized balanced truncation method that relies on two steps. First, we provide necessary and sufficient conditions such that systems explaining the data …
Model order reduction (MOR) is often applied to spatially-discretized partial differential equations to reduce their order and hence decrease computational complexity. A reduced system can be obtained, e.g., by time-limited balanced truncation, a method that aims to construct an accurate reduced order model on a given finite time interval $[0, T]$. This particular balancing related MOR technique is studied in this paper. An $L^2_T$-error bound based on the truncated time-limited singular values is proved and is the main result of this paper. The derived error bound converges (as $T\rightarrow …
In feedback flow control, one of the challenges is to develop mathematical models that describe the fluid physics relevant to the task at hand, while neglecting irrelevant details of the flow in order to remain computationally tractable. A number of techniques are presently used to develop such reduced-order models, such as proper orthogonal decomposition (POD), and approximate snapshot-based balanced truncation, also known as balanced POD. Each method has its strengths and weaknesses: for instance, POD models can behave unpredictably and perform poorly, but they can be computed directly from …
We introduce a model reduction approach for linear time-invariant second order systems based on positive real balanced truncation. Our method guarantees asymptotic stability and passivity of the reduced order model as well as the positive definiteness of the mass and stiffness matrices. Moreover, we receive an a priori gap metric error bound. Finally, we show that our method based on positive real balanced truncation preserves the structure of overdamped second order systems.
We present a balanced truncation model reduction approach for a class of nonlinear systems with time-varying and uncertain inputs. First, our approach brings the nonlinear system into quadratic-bilinear~(QB) form via a process called lifting, which introduces transformations via auxiliary variables to achieve the specified model form. Second, we extend a recently developed QB balanced truncation method to be applicable to such lifted QB systems that share the common feature of having a system matrix with zero eigenvalues. We illustrate this framework and the multi-stage lifting transformation …
We consider a Markov process in continuous time with a finite number of discrete states. The time-dependent probabilities of being in any state of the Markov chain are governed by a set of ordinary differential equations, whose dimension might be large even for trivial systems. Here, we derive a reduced ODE set that accurately approximates the probabilities of subspaces of interest with a known error bound. Our methodology is based on model reduction by balanced truncation and can be considerably more computationally efficient than the Finite State Projection Algorithm (FSP) when used for obta…
This paper studies model order reduction of multi-agent systems consisting of identical linear passive subsystems, where the interconnection topology is characterized by an undirected weighted graph. Balanced truncation based on a pair of specifically selected generalized Gramians is implemented on the asymptotically stable part of the full-order network model, which leads to a reduced-order system preserving the passivity of each subsystem. Moreover, it is proven that there exists a coordinate transformation to convert the resulting reduced-order model to a state-space model of Laplacian dyna…
We discuss balanced truncation model order reduction for large-scale quadratic-bilinear (QB) systems. Balanced truncation for linear systems mainly involves the computation of the Gramians of the system, namely reachability and observability Gramians. These Gramians are extended to a general nonlinear setting in Scherpen (1993), where it is shown that Gramians for nonlinear systems are the solutions of state-dependent nonlinear Hamilton-Jacobi equations. Therefore, they are not only difficult to compute for large-scale systems but also hard to utilize in the model reduction framework. In this …
We introduce a novel data-driven order reduction method for nonlinear control systems, drawing on recent progress in machine learning and statistical dimensionality reduction. The method rests on the assumption that the nonlinear system behaves linearly when lifted into a high (or infinite) dimensional feature space where balanced truncation may be carried out implicitly. This leads to a nonlinear reduction map which can be combined with a representation of the system belonging to a reproducing kernel Hilbert space to give a closed, reduced order dynamical system which captures the essential i…
Nonlinear balanced truncation is a model order reduction technique that reduces the dimension of nonlinear systems in a manner that accounts for either open- or closed-loop observability and controllability aspects of the system. Two computational challenges have so far prevented its deployment on large-scale systems: (a) the energy functions required for characterization of controllability and observability are solutions of high-dimensional Hamilton-Jacobi-(Bellman) equations, which have been computationally intractable and (b) the transformations to construct the reduced-order models (ROMs) …
When solving partial differential equations numerically, usually a high order spatial discretization is needed. Model order reduction (MOR) techniques are often used to reduce the order of spatially-discretized systems and hence reduce computational complexity. A particular MOR technique to obtain a reduced order model (ROM) is balanced truncation (BT). However, if one aims at finding a good ROM on a certain finite time interval only, time-limited BT (TLBT) can be a more accurate alternative. So far, no error bound on TLBT has been proved. In this paper, we close this gap in the theory by prov…
We present an estimator-based control design procedure for flow control, using reduced-order models of the governing equations, linearized about a possibly unstable steady state. The reduced models are obtained using an approximate balanced truncation method that retains the most controllable and observable modes of the system. The original method is valid only for stable linear systems, and we present an extension to unstable linear systems. The dynamics on the unstable subspace are represented by projecting the original equations onto the global unstable eigenmodes, assumed to be small in nu…
When solving partial differential equations numerically, usually a high order spatial discretisation is needed. Model order reduction (MOR) techniques are often used to reduce the order of spatially-discretised systems and hence reduce computational complexity. A particular MOR technique to obtain a reduced order model (ROM) is balanced truncation (BT), a method which has been extensively studied for deterministic linear systems. As so-called type I BT it has already been extended to bilinear equations, an important subclass of nonlinear systems. We provide an alternative generalisation of the…
Reduced-order modeling techniques, including balanced truncation and $\mathcal{H}_2$-optimal model reduction, exploit the structure of linear dynamical systems to produce models that accurately capture the dynamics. For nonlinear systems operating far away from equilibria, on the other hand, current approaches seek low-dimensional representations of the state that often neglect low-energy features that have high dynamical significance. For instance, low-energy features are known to play an important role in fluid dynamics where they can be a driving mechanism for shear-layer instabilities. Neg…
We consider model order reduction of a nonlinear cable-mass system modeled by a 1D wave equation with interior damping and dynamic boundary conditions. The system is driven by a time dependent forcing input to a linear mass-spring system at one boundary. The goal of the model reduction is to produce a low order model that produces an accurate approximation to the displacement and velocity of the mass in the nonlinear mass-spring system at the opposite boundary. We first prove that the linearized and nonlinear unforced systems are well-posed and exponentially stable under certain conditions on …
We propose a randomized first order optimization algorithm Gradient Projection Iterative Sketch (GPIS) and an accelerated variant for efficiently solving large scale constrained Least Squares (LS). We provide theoretical convergence analysis for both proposed algorithms and demonstrate our methods' computational efficiency compared to classical accelerated gradient method, and the state of the art variance-reduced stochastic gradient methods through numerical experiments in various large synthetic/real data sets.
In under-balanced drilling, the bottom-hole pressure is kept below pore pressure, causing pressure dependent influx of reservoir gas into the wellbore that makes the system unstable at low drawdowns. In this paper we propose a feedback controller which stabilizes the system around an arbitrary pressure setpoint, using only topside measurement, and assuming unknown reservoir parameters. A particular challenge with this problem is the distributed and highly nonlinear nature of the system dynamics. As the control model we use the ``reduced Drift Flux Model'' which models gas-liquid flow as a nonl…
A method for finding reduced-order approximations of turbulent flow models is presented. The method preserves bounds on the production of turbulent energy in the sense of the $\curly{L}_2$ norm of perturbations from a notional laminar profile. This is achieved by decomposing the Navier-Stokes system into a feedback arrangement between the linearised system and the remaining, normally neglected, nonlinear part. The linear system is reduced using a method similar to balanced truncation, but preserving bounds on the supply rate. The method involves balancing two algebraic Riccati equations. The b…
Large-scale network systems describe a wide class of complex dynamical systems composed of many interacting subsystems. A large number of subsystems and their high-dimensional dynamics often result in highly complex topology and dynamics, which pose challenges to network management and operation. This chapter provides an overview of reduced-order modeling techniques that are developed recently for simplifying complex dynamical networks. In the first part, clustering-based approaches are reviewed, which aim to reduce the network scale, i.e., find a simplified network with a fewer number of node…
We propose novel iterative learning control algorithms to track a reference trajectory in resource-constrained control systems. In many applications, there are constraints on the number of control actions, delivered to the actuator from the controller, due to the limited bandwidth of communication channels or battery-operated sensors and actuators. We devise iterative learning techniques that create sparse control sequences with reduced communication and actuation instances while providing sensible reference tracking precision. Numerical simulations are provided to demonstrate the effectivenes…
We study output tracking and disturbance rejection for an Euler-Bernoulli beam with Kelvin-Voigt damping. The system has distributed control and pointwise observation. As our main result we design a finite-dimensional low-order internal model based controller that is based on a spectral Galerkin method and model reduction by Balanced Truncation. The performance of the designed controller is demonstrated with numerical simulations and compared to the performance of a low-gain internal model based controller.
Model order reduction is a technique that is used to construct low-order approximations of large-scale dynamical systems. In this paper, we investigate a balancing based model order reduction method for dynamical systems with a linear dynamical equation and a quadratic output function. To this aim, we propose a new algebraic observability Gramian for the system based on Hilbert space adjoint theory. We then show the proposed Gramians satisfy a particular type of generalized Lyapunov equations and we investigate their connections to energy functionals, namely, the controllability and observabil…
