We numerically study the effect of inter-particle friction coefficient on the response to cyclical pure shear of spherical particles in three dimensions. We focus on the rotations and translations of grains and look at the spatial distribution of these displacements as well as their probability distribution functions. We find that with increasing friction, the shear band becomes thinner and more pronounced. At low friction, the amplitude of particle rotations is homogeneously distributed in the system and is therefore mostly independent from both the affine and non-affine particle translations. In contrast, at high friction, the rotations are strongly localized in the shear zone. This work shows the importance of studying the effects of inter-particle friction on the response of granular materials to cyclic forcing, both for a better understanding of how rotations correlate to translations in sheared granular systems, and due to the relevance of cyclic forcing for most real-world applications in planetary science and industry.
Using particle trajectory data obtained from x-ray tomography, we determine two kinds of effective temperatures in a cyclically sheared granular system. The first one is obtained from the fluctuation-dissipation theorem which relates the diffusion and mobility of lighter tracer particles immersed in the system. The second is the Edwards compactivity defined via the packing volume fluctuations. We find robust excellent agreement between these two temperatures, independent of the type of the tracers, cyclic shear amplitudes, and particle surface roughness. We further elucidate that in granular s…
We perform experimental and numerical studies of a granular system under cyclic-compression to investigate reversibility and memory effects. We focus on the quasi-static forcing of dense systems, which is most relevant to a wide range of geophysical, industrial, and astrophysical problems. We find that soft-sphere simulations with proper stiffness and friction quantitatively reproduce both the translational and rotational displacements of the grains. We then utilize these simulations to demonstrate that such systems are capable of storing the history of previous compressions. While both mean t…
We perform combined X-ray tomography and shear force measurements on a cyclically sheared granular system with highly transient behaviors, and obtain the evolution of microscopic structures and the macroscopic shear force during the shear cycle. We explain the macroscopic behaviors of the system based on microscopic processes, including the particle level structural rearrangement and frictional contact variation. Specifically, we show how contact friction can induce large structural fluctuations and cause significant shear dilatancy effect for granular materials, and we also construct an empir…
Many experiments over the past half century have shown that, for a range of protocols, granular materials compact under pressure and repeated small disturbances. A recent experiment on cyclically sheared spherical grains showed significant compaction via homogeneous crystallization (Rietz et al., 2018). Here we present numerical simulations of frictionless, purely repulsive spheres undergoing cyclic simple shear with dissipative Newtonian dynamics at fixed vertical load. We show that for sufficiently small strain amplitudes, cyclic shear gives rise to homogeneous crystallization at a volume fr…
We experimentally study the statistics of force-chain evolution in a vertically-tapped two-dimensional granular packing by using photoelastic disks. In this experiment, the tapped granular packing is gradually compacted. During the compaction, the isotropy of grain configurations is quantified by measuring the deviator anisotropy derived from fabric tensor, and then the evolution of force-chain structure is quantified by measuring the interparticle forces and force-chain orientational order parameter. As packing fraction increases, the interparticle force increases and finally saturates to an …
In stark contrast to the jamming of frictionless hard-sphere (hard-disk if in two dimensions) packings, the critical jamming of frictional packings is much more elusive and still under intense debate. Here we show that frictional hard-disk packings self-organize near a critical jamming state when subjected to quasi-static steady-state cyclic shear, displaying scale-free fluctuations in particle velocity fields as characterized by the power spectra $E(k)\propto k^{-α}$ for both longitudinal and transverse modes in wavevector space, with $α\approx2.0\pm0.15$, and the nearly flat spectra $E(ω)\pr…
Hysteresis is a major feature of the solid-liquid transition in granular materials. This property, by allowing metastable states, can potentially yield catastrophic phenomena such as earthquakes or aerial landslides. The origin of hysteresis in granular flows is still debated. However, most mechanisms put forward so far rely on the presence of inertia at the particle level. In this paper, we study the avalanche dynamics of non-Brownian suspensions in slowly rotating drums and reveal large hysteresis of the avalanche angle even in the absence of inertia. By using micro-silica particles whose in…
The rheology of cohesive granular materials, under a constant pressure condition, is studied using molecular dynamics simulations. Depending on the shear rate, pressure, and interparticle cohesiveness, the system exhibits four distinctive phases: uniform shear, oscillation, shear-banding, and clustering. The friction coefficient is found to increase with the inertial number, irrespective of the cohesiveness. The friction coefficient becomes larger for strong cohesion. This trend is explained by the anisotropies of the coordination number and angular distribution of the interparticle forces. In…
While convective flows are implicated in many granular segregation processes, the associated particle-scale rearrangements are not well understood. A three-dimensional bidisperse mixture segregates under steady shear, but the cyclically driven system either remains mixed or segregates slowly. Individual grain motion shows no signs of particle-scale segregation dynamics that precede bulk segregation. Instead, we find that the transition from non-segregating to segregating flow is accompanied by significantly less reversible particle trajectories, and the emergence of a convective flow field.
We investigate the link between particle-scale dynamics and bulk behaviors of thickly-coated particle-fluid flows using computational simulations. We find that, similar to dense fully-saturated slurries, the form the rheology takes in these systems can carry signatures of interparticle collisions and/or interparticle viscous dynamics that vary solid fraction. However, we find significant qualitative and quantitative differences in the transitions of the system between what might be called viscous, collisional, and visco-collisional behaviors. We show how these transitions arise from changes in…
We present an X-ray tomography study of the segregation mechanisms of tracer particles in a three-dimensional cyclically sheared bi-disperse granular medium. Big tracers are dragged by convection to rise to the top surface and then remain trapped there due to the small downward convection cross-section, which leads to segregation. Additionally, we also find that the local structural up-down asymmetry due to arching effect around big tracers will induce the tracers to have a net upward displacement against its smaller neighbors, which is another mechanism for segregation.
Contact friction is a key influence factor for the shearing behaviour of granular media. In the discrete element method (DEM) contact friction is usually modelled with Coulomb's law assuming a constant interparticle friction coefficient. From tribology it is known that friction is influenced by several factors, e.g., temperature, normal stress, surface condition, etc. None of these influences can be modelled with the constant interparticle friction coefficient from Coulomb's law. For a given granular material (particle shape distribution), the usage of constant interparticle friction in DEM mo…
Granular materials transmit stress via a network of force chains. Despite the importance of these chains to characterizing the stress state and dynamics of the system, there is no common framework for quantifying their their properties. Recently, attention has turned to the tools of network science as a promising route to such a description. In this paper, we apply community detection techniques to numerically-generated packings of spheres over a range of interparticle friction coefficients and confining pressures. In order to extract chain-like features, we use a modularity maximization with …
Despite there being an infinite variety of types of flow, most rheological studies focus on a single type such as simple shear. Using discrete element simulations, we explore bulk granular systems in a wide range of flow types at large strains and characterize invariants of the stress tensor for different inertial numbers and interparticle friction coefficients. We identify a strong dependence on the type of flow which grows with increasing inertial number or friction. Standard models of yielding, repurposed to describe the dependence of the stress on flow type in steady-state flow and at fini…
The author investigates the onset of patterns in vertically oscillated layers of dissipative particles using numerical solutions of continuum equations to Navier-Stokes order. Above a critical accelerational amplitude of the cell, standing waves form stripe patterns which oscillate subharmonically with respect to the cell. Continuum simulations neglecting interparticle friction yield pattern wavelengths consistent with experiments using frictional particles. However, the critical acceleration for standing wave formation is approximately 10% lower in continuum simulations without added noise th…
When smooth granular material is fluidized by vertically shaking a container, we find that the temperature in the direction of energy input always exceeds the temperature in the other directions. An analytical model is presented which shows how the anisotropy can be traced back to the inelasticity of the interparticle collisions and the collisions with the wall. The model compares very well with molecular dynamics simulations. It is concluded that any non-isotropic driving of a granular gas in a steady state necessarily causes anisotropy of the granular temperature.
We investigate the rheology of granular materials via molecular dynamics simulations of homogeneous, simple shear flows of soft, frictional, noncohesive spheres. In agreement with previous results for frictionless particles, we observe three flow regimes existing in different domains of particle volume fraction and shear rate, with all stress data collapsing upon scaling by powers of the distance to the jamming point. Though this jamming point is a function of the interparticle friction coefficient, the relation between pressure and strain rate at this point is found to be independent of frict…
The transmission rules of interparticle forces between granular particles were analyzed, and a discrete packing model was proposed to calculate the static pressure at the bottom of granular material confined in a vertical column. The mechanical analysis and numerical simulation results indicate that the silo effect is caused by the frictional contacts between border particles and inner walls, the static pressure at the bottom depends on the external load initially, and then tends to a saturation pressure (Pn) in an exponential form. The saturation pressure (Pn) is positive linear related to th…
The shear strength of cohesionless granular materials is generally attributed to the compactness or anisotropy of their microstructure. An open issue is how such compact or anisotropic microstructures, and thus the shear strength, depend on the particle properties. We first recall the role of fabric and force anisotropies with respect to the critical-state shear stress. Then, a model of accessible geometrical states in terms of particle connectivity and contact anisotropy is presented. This model incorporates in a simple way the fact that, due to steric exclusions, the highest levels of connec…
We performed computer simulations based on a two-dimensional Distinct Element Method to study granular systems of magnetized spherical particles. We measured the angle of repose and the surface roughness of particle piles, and we studied the effect of magnetization on avalanching. We report linear dependence of both angle of repose and surface roughness on the ratio $f$ of the magnetic dipole interaction and the gravitational force (\emph{interparticle force ratio}). There is a difference in avalanche formation at small and at large interparticle force ratios. The transition is at $f_c \approx…
The transition between shear-flowing and shear-arrested states of frictional granular matter is studied using constant-stress discrete element simulations. By subjecting a dilute system of frictional grains to a constant external shear stress and pressure, friction-dependent critical shear stress and density are clearly identified with both exhibiting a crossover between low and high friction. The critical shear stress bifurcates two nonequilibrium steady states: (i) steady state shear flow characterized by a constant deformation rate, and (ii) shear arrest characterized by temporally decaying…
Understanding the coupled thermo-mechanical behaviour of compacted granular beds can benefit various industrial applications, such as pebble bed design in fusion reactors. In this study, a thermo-mechanical discrete element method based on our previous work is improved and adapted to investigate the cyclic thermo-mechanical performance of gas-filled granular materials composed of elastoplastic grains. An interparticle contact model is developed considering the plastic deformation of grains. Through the simulation on a representative volume element of beryllium pebble beds, we provide grain-sca…
We have studied the gravity driven flow of spherical shaped, millimetric sized granular material coated with aspherical, micron-sized, near frictionless lubricant particles. Experiments were performed on an inclined plane using two different sized particles for varying concentrations of the lubricant. The particle volumetric flow rate exhibits a non-monotonic behavior with increasing lubricant concentration. It shows an increase at lower lubricant concentration followed by a decrease at higher lubricant concentration. The lubricant particles adhere to the granular particle surface thereby redu…
Dense granular systems subjected to an imposed shear stress undergo stick-slip dynamics with systematic patterns of dilation-compaction. During each stick phase, as the frictional strength builds up, the granular system dilates to accommodate shear strain, developing stronger force networks. During each slip event, when the stored energy is released, particles experience large rearrangements and the granular network can significantly change. Here, we use numerical simulations of 3D, sheared frictional packings to show that the mean betweenness centrality -- a property of network of interpartic…
We measure the two-point density correlations and Voronoi cell distributions of cyclically sheared granular spheres obtained with a fluorescence technique and compare them with random packing of frictionless spheres. We find that the radial distribution function $g(r)$ is captured by the Percus-Yevick equation for initial volume fraction $ϕ=0.59$. However, small but systematic deviations are observed because of the splitting of the second peak as $ϕ$ is increased towards random close packing. The distribution of the Voronoi free volumes deviates from postulated $Γ$ distributions, and the orien…
Self-organization, and transitions from reversible to irreversible behaviour, of interacting particle assemblies driven by externally imposed stresses or deformation is of interest in comprehending diverse phenomena in soft matter. They have been investigated in a wide range of systems, such as colloidal suspensions, glasses, and granular matter. In different density and driving regimes, such behaviour is related to yielding of amorphous solids, jamming, and memory formation, \emph{etc.} How these phenomena are related to each other has not, however, been much studied. In order to obtain a uni…
We present a new mode of transport of spherical particles in a horizontally vibrated channel with sawtooth shaped side walls. The underlying driving mechanism is based on an interplay of directional energy injection transformed by the sidewall collisions and density dependent interparticle collisions. Experiments and matching numerics show that the average particle velocity reaches a maximum at 60% of the maximal filling density. Introducing a spatial phase shift between the channel boundaries increases the transport velocity by an order of magnitude.
We study the Navier-Stokes steady states for a low density monodisperse hard sphere granular gas (i.e, a hard sphere ideal monatomic gas with inelastic interparticle collisions). We present a classification of the uniform steady states that can arise from shear and temperature (or energy input) applied at the boundaries (parallel walls). We consider both symmetric and asymmetric boundary conditions and find steady states not previously reported, including sheared states with linear temperature profiles. We provide explicit expressions for the hydrodynamic profiles for all these steady states. …
Shearing with a finite shear rate a compressed granular system results in a region of grains flowing over a compact, static assembly. Perforce this region is dilated to a degree that depends on the shear rate, the loading pressure, gravity, various material parameters, and the preparation protocol. In spite of numerous studies of granular flows a predictive theory of the amount of dilation is still lacking. Here, we offer a scaling theory that is focused on such a prediction as a function of shear rate and the dissipative parameters of the granular assembly. The resulting scaling laws are univ…
We investigate the unjamming response of disordered packings of frictional hard disks with the help of computer simulations. First, we generate jammed configurations of the disks and then force them to move again by local perturbations. We study the spatial distribution of the stress and displacement response and find long range effects of the perturbation in both cases. We record the penetration depth of the displacements and the critical force that is needed to make the system yield. These quantities are tested in two types of systems: in ideal homogeneous packings in zero gravity and in pac…
We investigate the mechanical response of jammed packings of repulsive, frictionless spherical particles undergoing isotropic compression. Prior simulations of the soft-particle model, where the repulsive interactions scale as a power-law in the interparticle overlap with exponent $α$, have found that the ensemble-averaged shear modulus $\langle G \rangle$ increases with pressure $P$ as $\sim P^{(α-3/2)/(α-1)}$ at large pressures. However, a deep theoretical understanding of this scaling behavior is lacking. We show that the shear modulus of jammed packings of frictionless, spherical particles…
We study the rheology and distribution of interparticle contact lifetimes for gravity-driven, dense granular flows of non-cohesive particles down an inclined plane using large-scale, three dimensional, granular dynamics simulations. Rather than observing a large number of long-lived contacts as might be expected for dense flows, brief binary collisions predominate. In the hard particle limit, the rheology conforms to Bagnold scaling, where the shear stress is quadratic in the strain rate. As the particles are made softer, however, we find significant deviations from Bagnold rheology; the mater…
Unilateral interparticle interactions have an effect on the elastic response of granular materials due to the opening and closing of contacts during quasi-static shear deformations. A simplified model is presented, for which constitutive relations can be derived. For biaxial deformations the elastic behavior in this model involves three independent elastic moduli: bulk, shear, and anisotropy modulus. The bulk and the shear modulus, when scaled by the contact density, are independent of the deformation. However, the magnitude of the anisotropy modulus is proportional to the ratio between shear …
The effect of boundaries on the force distributions in granular media is illustrated by simulations of 2D packings of frictionless, Hertzian spheres. To elucidate discrepancies between experimental observations and theoretical predictions, we distinguish between the weight distribution {\cal P} (w) measured in experiments and analyzed in the q-model, and the distribution of interparticle forces P(f). The latter one is robust, while {\cal P}(w) can be obtained once the local packing geometry and P(f) are known. By manipulating the (boundary) geometry, we show that {\cal P}(w) can be varied dras…
We present an experiment in which a horizontal quasi-2D granular system with a fixed neighbor network is cyclically compressed and decompressed over 1000 cycles. We remove basal friction by floating the particles on a thin air cushion, so that particles only interact in-plane. As expected for a granular system, the applied load is not distributed uniformly, but is instead concentrated in force chains which form a network throughout the system. To visualize the structure of these networks, we use particles made from photoelastic material. The experimental setup and a new data-processing pipelin…
The irregularity of particle motions during quasi-static deformation is investigated using discrete element (DEM) simulations of sphere and sphere-cluster assemblies. A total of three types of interparticle movements are analyzed: relative motions of particle centers, relative motions of material points of two particles at their contact, and the traversal of contacts across the surfaces of particles. Motions are a complex combination of rolling, sliding, and elastic distortion at the contacts, and all motions are highly irregular and variant, qualities that increase with increasing strain. The…
Contact-based vibrations play a critical role in the dynamics of granular materials. Significant insights into vibrational granular dynamics have been obtained with reduced-dimensional systems containing macroscale particles. We study contact-based vibrations of a two-dimensional monolayer of micron-sized spheres on a solid substrate. Measurements of the resonant attenuation of laser-generated surface acoustic waves reveal three collective vibrational modes involving both displacements and rotations of the microspheres. To identify the modes, we tune the interparticle stiffness, which shifts t…
Gravity-driven size segregation is important in mountain streams where a wide range of grain sizes are transported as bedload. More particularly, vertical size segregation is a multi-scale process that originates in interactions at the scale of particles with important morphological consequences on the reach scale. To address this issue, a volume-averaged multi-phase flow model for immersed bidisperse granular flows was developed based on an interparticle segregation force (Guillard et al. 2016) and a granular Stokesian drag force (Tripathi and Khakhar 2013). An advection-diffusion model was d…
This paper presents a micromechanical study of unsaturated granular media in the pendular regime, based upon numerical experiments using the discrete element method, compared to a microstructural elastoplastic model. Water effects are taken into account by adding capillary menisci at contacts and their consequences in terms of force and water volume are studied. Simulations of triaxial compression tests are used to investigate both macro and micro-effects of a partial saturation. The results provided by the two methods appear to be in good agreement, reproducing the major trends of a partially…
