We study internet of things (IoT) systems supported by cell-free (CF) massive MIMO (mMIMO) with optimal linear channel estimation. For the uplink, we consider optimal linear MIMO receiver and obtain an uplink SINR approximation involving only large-scale fading coefficients using random matrix (RM) theory. Using this approximation we design several max-min power control algorithms that incorporate power and rate weighting coefficients to achieve a target rate with high energy efficiency. For the downlink, we consider maximum ratio (MR) beamforming. Instead of solving a complex quasi-concave problem for downlink power control, we employ a neural network (NN) technique to obtain comparable power control with around 30 times reduction in computation time. For large networks we proposed a different NN based power control algorithm. This algorithm is sub-optimal, but its big advantage is that it is scalable.
This paper deals with linear equalization in massive multi-user multiple-input multiple-output (MU-MIMO) wireless systems. We first provide simple conditions on the antenna configuration for which the well-known linear minimum mean-square error (L-MMSE) equalizer provides near-optimal spectral efficiency, and we analyze its performance in the presence of parameter mismatches in the signal and/or noise powers. We then propose a novel, optimally-tuned NOnParametric Equalizer (NOPE) for massive MU-MIMO systems, which avoids knowledge of the transmit signal and noise powers altogether. We show tha…
Massive MIMO is considered to be one of the key technologies in the emerging 5G systems, but also a concept applicable to other wireless systems. Exploiting the large number of degrees of freedom (DoFs) of massive MIMO essential for achieving high spectral efficiency, high data rates and extreme spatial multiplexing of densely distributed users. On the one hand, the benefits of applying massive MIMO for broadband communication are well known and there has been a large body of research on designing communication schemes to support high rates. On the other hand, using massive MIMO for Internet-o…
To support massive connectivity and boost spectral efficiency for internet of things (IoT), a downlink scheme combining virtual multiple-input multiple-output (MIMO) and nonorthogonal multiple access (NOMA) is proposed. All the single-antenna IoT devices in each cluster cooperate with each other to establish a virtual MIMO entity, and multiple independent data streams are requested by each cluster. NOMA is employed to superimpose all the requested data streams, and each cluster leverages zero-forcing detection to de-multiplex the input data streams. Only statistical channel state information (…
Traditional simultaneous wireless information and power transfer (SWIPT) with power splitting assumes perfect channel state information (CSI), which is difficult to obtain especially in the massive multiple-input-multiple-output (MIMO) regime. In this letter, we consider a mixed-timescale joint beamforming and power splitting (MJBP) scheme to maximize general utility functions under a power constraint in the downlink of a massive MIMO SWIPT IoT network. In this scheme, the transmit digital beamformer is adapted to the imperfect CSI, while the receive power splitters are adapted to the long-ter…
Jiangnan University（江南大学）；State Key Laboratory of Integrated Services Networks (Xidian University)（综合业务网理论及关键技术国家重点实验室（西安电子科技大学））；Qualcomm（高通公司）；Tsinghua University（清华大学）；University of Kent（肯特大学）；Jiangsu Future Networks Innovation Institute（江苏未来网络创新研究院）
Multi-input multi-out and non-orthogonal multiple access (MIMO-NOMA) internet-of-things (IoT) systems can improve channel capacity and spectrum efficiency distinctly to support the real-time applications. Age of information (AoI) is an important metric for real-time application, but there is no literature have minimized AoI of the MIMO-NOMA IoT system, which motivates us to conduct this work. In MIMO-NOMA IoT system, the base station (BS) determines the sample collection requirements and allocates the transmission power for each IoT device. Each device determines whether to sample data accordi…
An intelligent reflecting surface (IRS)-assisted millimeter-wave (mmWave) massive multiple input multiple output (MIMO) system with transmit antenna selection (TAS) using orthogonal space-time block codes (OSTBC) scheme is proposed in this paper. This system combines TAS and IRS with hybrid analog-digital beamforming (HBF) for 60 GHz mmWave communications in order to exploit the benefits of TAS, OSTBC, analog beamforming (ABF), and transmit digital precoding techniques. The proposed system, however, benefits from the transmit diversity gain of OSTBC scheme as well as from the signal-to-noise r…
One basic operation of Internet-of-Things (IoT) networks is aggregating distributed sensing-data over wireless-channels for function-computation, called wireless-data-aggregation (WDA). Targeting dense sensors, a recently developed technology called over-the-air computing (AirComp) can dramatically reduce the WDA latency by aggregating distributed data "over-the-air" using the waveform-superposition property of a multi-access channel. In this work, we design multiple-input-multiple-output (MIMO) AirComp for computing a vector-valued function in a clustered IoT network with multi-antenna sensor…
We consider Internet of Things (IoT) organized on the principles of cell-free massive MIMO. Since the number of things is very large, orthogonal pilots cannot be assigned to all of them even if the things are stationary. This results in an unavoidable pilot contamination problem, worsened by the fact that, for IoT, since the things are operating at very low transmit power. To mitigate this problem and achieve a high throughput, we use cell-free systems with optimal linear minimum mean squared error (LMMSE) channel estimation, while traditionally simple suboptimal estimators have been used in s…
The multi-panel array, as a state-of-the-art antenna-in-package technology, is very suitable for millimeter-wave (mmWave)/terahertz (THz) systems, due to its low-cost deployment and scalable configuration. But in the context of nonuniform array structures it leads to intractable signal processing. Based on such an array structure at the base station, this paper investigates a joint active user detection (AUD) and channel estimation (CE) scheme based on compressive sensing (CS) for application to the massive Internet of Things (IoT). Specifically, by exploiting the structured sparsity of mmWave…
Deep Learning-Based Multi-User Communication Design for Dense IoT Networks: Interference-Aware Finite-Blocklength Communication and Preliminary MIMO Extensions
The number of wireless devices is drastically increasing, resulting in many devices contending for radio resources. In this work, we present an algorithm to detect active devices for unsourced random access, i.e., the devices are uncoordinated. The devices use a unique, but non-orthogonal preamble, known to the network, prior to sending the payload data. They do not employ any carrier sensing technique and blindly transmit the preamble and data. To detect the active users, we exploit partial channel state information (CSI), which could have been obtained through a previous channel estimate. Fo…
The sixth-generation (6G) network is envisioned to integrate communication and sensing functions, so as to improve the spectrum efficiency (SE) and support explosive novel applications. Although the similarities of wireless communication and radio sensing lay the foundation for their combination, there is still considerable incompatible interest between them. To simultaneously guarantee the communication capacity and the sensing accuracy, the multiple-input and multiple-output (MIMO) technique plays an important role due to its unique capability of spatial beamforming and waveform shaping. How…
To support the unprecedented growth of the Internet of Things (IoT) applications, tremendous data need to be collected by the IoT devices and delivered to the server for further computation. By utilizing the same signals for both radar sensing and data communication, the integrated sensing and communication (ISAC) technique has broken the barriers between data collection and delivery in the physical layer. By exploiting the analog-wave addition in a multi-access channel, over-the-air computation (AirComp) enables function computation via transmissions in the physical layer. The promising perfo…
Guangzhou University（广州大学）；University of Luxembourg（卢森堡大学）；Southwest Jiaotong University（西南交通大学）；Queen Mary University of London（伦敦玛丽女王大学）；Aristotle University of Thessaloniki（塞萨洛尼基亚里士多德大学）
This paper investigates the optimal signal detection problem with a particular interest in large-scale multiple-input multiple-output (MIMO) systems. The problem is NP-hard and can be solved optimally by searching the shortest path on the decision tree. Unfortunately, the existing optimal search algorithms often involve prohibitively high complexities, which indicates that they are infeasible in large-scale MIMO systems. To address this issue, we propose a general heuristic search algorithm, namely, hyper-accelerated tree search (HATS) algorithm. The proposed algorithm employs a deep neural ne…
We propose an optimal low-resolution precoding technique that minimizes the symbol error probability of the users. Unlike existing approaches that rely on QPSK modulation, for the derivation of the minimum symbol error probability objective function the current approach allows for any PSK modulation order. Moreover, the proposed method solves the corresponding discrete optimization problem optimally via a sophisticated branch-and-bound method. Moreover, we propose different approaches based on the greedy search method to compute practical solutions. Numerical simulations confirm the superiorit…
Grant-free non-coherent index-modulation (NC-IM) has been recently considered as an efficient massive access scheme for enabling cost- and energy-limited Internet-of-Things (IoT) devices that transmit small data packets. This paper investigates the grant-free NC-IM scheme combined with orthogonal frequency division multiplexing for applicant to unmanned aerial vehicle (UAV)-based massive IoT access. Specifically, each device is assigned a unique non-orthogonal signature sequence codebook. Each active device transmits one of its signature sequences in the given time-frequency resources, by modu…
This paper considers the uplink of user-centric cell-free massive MIMO (multiple-input multiple-output) systems. We utilize the user-centric dynamic cooperation clustering (DCC) framework and derive the achievable spectral efficiency with two-layer decoding that is divided between the access points and the central processing unit (CPU). This decoding method is also known as large-scale fading decoding (LSFD). The fronthaul signaling load is analyzed and a nearly optimal second-layer decoding scheme at the CPU is proposed to reduce the fronthaul requirements compared to the optimal scheme. We a…
To efficiently support the real-time control applications, networked control systems operating with ultra-reliable and low-latency communications (URLLCs) become fundamental technology for future Internet of things (IoT). However, the design of control, sensing and communications is generally isolated at present. In this paper, we propose the joint optimization of control cost and energy consumption for a centralized wireless networked control system. Specifically, with the ``sensing-then-control'' protocol, we first develop an optimization framework which jointly takes control, sensing and co…
Joint communication and sensing (JCAS) has the potential to improve the overall energy, cost and frequency efficiency of IoT systems. As a first effort, we propose to optimize the MIMO-OFDM data symbols carried by sub-carriers for better time- and spatial-domain signal orthogonality. This not only boosts the availability of usable signals for JCAS, but also significantly facilitates Internet-of-Things (IoT) devices to perform high-quality sensing. We establish an optimization problem that modifies data symbols on sub-carriers to enhance the above-mentioned signal orthogonality. We also develop…
The high energy consumption of massive multi-input multi-out (MIMO) system has become a prominent problem in the millimeter wave(mm-Wave) communication scenario. The hybrid precoding technology greatly reduces the number of radio frequency(RF) chains by handing over part of the coding work to the phase shifting network, which can effectively improve energy efficiency. However, conventional hybrid precoding algorithms based on mathematical means often suffer from performance loss and high computational complexity. In this paper, a novel BP-neural-network-enabled hybrid precoding algorithm is pr…
We consider the problem of maximizing the harvested power in Multiple Input Multiple Output (MIMO) Simultaneous Wireless Information and Power Transfer (SWIPT) systems with power splitting reception. Different from recently proposed designs, we target with our novel problem formulation at the jointly optimal transmit precoding and receive uniform power splitting (UPS) ratio maximizing the harvested power, while ensuring that the Quality-of-Service (QoS) requirement of the MIMO link is satisfied. We assume generic practical Radio Frequency (RF) Energy Harvesting (EH) receive operation that resu…
In multicell massive multiple-input multiple-output (MIMO) non-orthogonal multiple access (NOMA) networks, base stations (BSs) with multiple antennas deliver their radio frequency energy in the downlink, and Internet-of-Things (IoT) devices use their harvested energy to support uplink data transmission. This paper investigates the energy efficiency (EE) problem for multicell massive MIMO NOMA networks with wireless power transfer (WPT). To maximize the EE of the network, we propose a novel joint power, time, antenna selection, and subcarrier resource allocation scheme, which can properly alloc…
This letter shows that optimizing the transmit powers along with optimally designed nonorthogonal pilots can significantly reduce pilot contamination and improve the overall throughput of the uplink multi-cell massive multiple-input multiple-output (MIMO) system as compared to the conventional schemes that use orthogonal pilots. Given the optimized nonorthogonal pilots, power control as a function of the large-scale path-loss can be thought of as a stochastic optimization problem due to the presence of fast fading. This paper advocates a deterministic approach to solve this problem, then furth…
We present the concept of Simultaneous Lightwave Information and Power Transfer (SLIPT) for indoor Internet-of-Things (IoT) applications. Specifically, we propose novel and fundamental SLIPT strategies, which can be implemented through Visible Light or Infrared communication systems, equipped with a simple solar panel-based receiver. These strategies are performed at the transmitter or at the receiver, or at both sides, named Adjusting transmission, Adjusting reception and Coordinated adjustment of transmission and reception, correspondingly. Furthermore, we deal with the fundamental trade-off…
Device-to-device (D2D) and non-orthogonal multiple access (NOMA) are promising technologies to meet the challenges of the next generations of mobile communications in terms of network density and diversity for internet of things (IoT) services. This paper tackles the problem of maximizing the D2D sum-throughput in an IoT system underlaying a cellular network, through optimal channel and power allocation. NOMA is used to manage the interference between cellular users and full-duplex (FD) IoT devices. To this aim, mutual successive interference cancellation (SIC) conditions are identified to all…
Massive multiple-input multiple-output (MIMO) systems need to support massive connectivity for the application of the Internet of things (IoT). The overhead of channel state information (CSI) acquisition becomes a bottleneck in the system performance due to the increasing number of users. An intermittent estimation scheme is proposed to ease the burden of channel estimation and maximize the sum capacity. In the scheme, we exploit the temporal correlation of MIMO channels and analyze the influence of the age of CSI on the downlink transmission rate using linear precoders. We show the CSI updati…
This paper investigates the symbol error probability~(SEP) of point-to-point massive multiple-input multiple-output (MIMO) systems using equally likely PAM, PSK, and square QAM signallings in the presence of transmitter correlation. The receiver has perfect knowledge of the channel coefficients, while the transmitter only knows first- and second-order channel statistics. With a zero-forcing~(ZF) detector implemented at the receiver side, we design and derive closed-form expressions of the optimal precoders at the transmitter that minimizes the average SEP over channel statistics for various mo…
In this paper, multi-stream transmission in interference networks aided by multiple amplify-and-forward (AF) relays in the presence of direct links is considered. The objective is to minimize the sum power of transmitters and relays by beamforming optimization under the stream signal-to-interference-plus-noise-ratio (SINR) constraints. For transmit beamforming optimization, the problem is a well-known non-convex quadratically constrained quadratic program (QCQP) that is NP-hard to solve. After semi-definite relaxation (SDR), the problem can be optimally solved via alternating direction method …
This letter proposes a joint pilot and payload power allocation (JPA) scheme to mitigate the error propagation problem for uplink multiple-input multiple-output non-orthogonal multiple access (MIMO-NOMA) systems. A base station equipped with a maximum ratio combining and successive interference cancellation (MRC-SIC) receiver is adopted for multiuser detection. The average signal-to-interference-plus-noise ratio (ASINR) of each user during the MRC-SIC decoding is analyzed by taking into account the error propagation due to the channel estimation error. Furthermore, the JPA design is formulated…
Achieving ultra-reliable, low-latency and secure communications is essential for realizing the industrial Internet of Things (IIoT). Non-coherent massive multiple-input multiple-output (MIMO) is one of promising techniques to fulfill ultra-reliable and low-latency requirements. In addition, physical layer authentication (PLA) technology is particularly suitable for secure IIoT communications thanks to its low-latency attribute. A PLA method for non-coherent massive single-input multiple-output (SIMO) IIoT communication systems is proposed in this paper. This method realizes PLA by embedding an…
We investigate the activity detection and channel estimation issues for cell-free Internet of Things (IoT) networks with massive random access. In each time slot, only partial devices are active and communicate with neighboring access points (APs) using non-orthogonal random pilot sequences. Different from the centralized processing in cellular networks, the activity detection and channel estimation in cell-free IoT is more challenging due to the distributed and user-centric architecture. We propose a two-stage approach to detect the random activities of devices and estimate their channel stat…
This paper aims to minimize the total transmit power consumption for Massive MIMO (multiple-input multiple-output) downlink cellular systems when each user is served by the optimized subset of the base stations (BSs). We derive a lower bound on the ergodic spectral efficiency (SE) for Rayleigh fading channels and maximum ratio transmission (MRT) when the BSs cooperate using non-coherent joint transmission. We solve the joint user association and downlink transmit power minimization problem optimally under fixed SE constraints. Furthermore, we solve a max-min fairness problem with user specific…
Internet-of-Things (IoT) refers to a high-density network of low-cost low-bitrate terminals and sensors where also low energy consumption is one central feature. As the power-budget of classical receiver chains is dominated by the high-resolution analog-to-digital converters (ADCs), there is a growing interest towards deploying receiver architectures with reduced-bit or even 1-bit ADCs. In this paper, we study waveform design, optimization and detection aspects of multi-user massive MIMO downlink where user terminals adopt very simple 1-bit ADCs with oversampling. In order to achieve spectral …
Spurred by the dramatic mobile IP growth and the emerging Internet of Things (IoT) and cloud-based applications, wireless networking is witnessing a paradigm shift. By fully exploiting the spatial degrees of freedom, the massive multipleinput- multiple-output (MIMO) technology promises significant gains in both data rates and link reliability. This paper presents a time-division duplex (TDD)-based 128-antenna massive MIMO prototyping system designed to operate on a 20 MHz bandwidth. Up to twelve single-antenna users can be served by the designed system at the same time. System model is provide…
To improve the poor performance of distributed operation and non-scalability of centralized operation in traditional cell-free massive MIMO, we propose a cell-free distributed collaborative (CFDC) massive multiple-input multiple-output (MIMO) system based on a novel two-layer model to take advantages of the distributed cloud-edge-end collaborative architecture in beyond 5G (B5G) internet of things (IoT) environment to provide strong flexibility and scalability. We further ultilize the proposed CFDC massive MIMO system to support the low altitude three-dimensional (3-D) coverage scenario with u…
The Full Dimension-MIMO (FD-MIMO) technology is capable of achieving huge improvements in network throughput with simultaneous connectivity of a large number of mobile wireless devices, unmanned aerial vehicles, and the Internet of Things (IoT). In FD-MIMO, with a large number of antennae at the base station and the ability to perform beamforming, the capacity of the physical downlink shared channel (PDSCH) has increased a lot. However, the current specifications of the 3rd Generation Partnership Project (3GPP) does not allow the base station to perform beamforming techniques for the physical …
In this paper, we study the problem of joint active and passive beamforming for intelligent reflecting surface (IRS)-assisted massive MIMO systems, where multiple IRSs equipped with a large number of passive elements are deployed to assist a base station (BS) to simultaneously serve a small number of single-antenna users in the same time-frequency resource. Our objective is to maximize the minimum signal to interference plus noise (SINR) at users by jointly optimizing the transmit precoding vector at the BS and phase shift parameters at IRSs. We show that an interesting automatic interference …
In this paper, we analyze the achievable downlink spectral efficiency of cell-free massive multiple input multiple output (CF-mMIMO) systems, accounting for the effects of channel aging (caused by user mobility) and pilot contamination. We consider two cases, one where user equipments (UEs) rely on downlink pilots beamformed by the access points (APs) to estimate downlink channel, and another where UEs utilize statistical channel state information (CSI) for data decoding. For comparison, we also consider cellular mMIMO and derive its achievable spectral efficiency with channel aging and pilot …
Achieving ultra-reliable, low-latency and secure communications is essential for realizing the industrial Internet of Things (IIoT). Non-coherent massive multiple-input multiple-output (MIMO) has recently been proposed as a promising methodology to fulfill ultra-reliable and low-latency requirements. In addition, physical layer authentication (PLA) technology is particularly suitable for IIoT communications thanks to its low-latency attribute. A PLA method for non-coherent massive single-input multiple-output (SIMO) IIoT communication systems is proposed in this paper. Specifically, we first d…
This paper studies the user scheduling problem in a multiuser multiple-input multi-output (MIMO) status update system, in which multiple single-antenna devices aim to send their latest statuses to a multiple-antenna information-fusion access point (AP) via a shared wireless channel. The information freshness in the considered system is quantified by a recently proposed metric, termed age of information (AoI). Thanks to the extra spatial degrees-of-freedom brought about by the multiple antennas at the AP, multiple devices can be granted to transmit simultaneously in each time slot. We aim to se…
In this paper, the problem of outer beamformer design based only on channel statistic information is considered for two-stage beamforming for multi-user massive MIMO downlink, and the problem is approached based on signal-to-leakage-plus-noise ratio (SLNR). To eliminate the dependence on the instantaneous channel state information, a lower bound on the average SLNR is derived by assuming zero-forcing (ZF) inner beamforming, and an outer beamformer design method that maximizes the lower bound on the average SLNR is proposed. It is shown that the proposed SLNR-based outer beamformer design probl…
