In this letter, we propose a progressive rate-filling method as a framework to study agile construction of multilevel polar-coded modulation. We show that the bit indices within each component polar code can follow a fixed, precomputed ranking sequence, e.g., the Polar sequence in the 5G standard, while their allocated rates (i.e., the number of information bits of each component polar code) can be fast computed by exploiting the target sum-rate approximation and proper rate-filling methods. In particular, we develop two rate-filling strategies based on the capacity and the rate considering the finite block-length effect. The proposed construction methods can be performed independently of the actual channel condition with ${O\left(m\right)}$ ($m$ denotes the modulation order) complexity and robust to diverse modulation and coding schemes in the 5G standard, which is a desired feature for practical systems.
A multilevel coded modulation scheme is studied that uses solely binary polar codes and Honda-Yamamoto probabilistic shaping. The scheme is shown to achieve the capacity of discrete memoryless channels with input alphabets of cardinality a power of two. The performance of finite-length implementations is compared to polar-coded probabilistic amplitude shaping and constant composition distribution matching.
A framework is proposed that allows for a joint description and optimization of both binary polar coding and the multilevel coding (MLC) approach for $2^m$-ary digital pulse-amplitude modulation (PAM). The conceptual equivalence of polar coding and multilevel coding is pointed out in detail. Based on a novel characterization of the channel polarization phenomenon, rules for the optimal choice of the bit labeling in this coded modulation scheme employing polar codes are developed. Simulation results for the AWGN channel are included.
Multilevel coding (MLC) is a coded modulation technique which can achieve excellent performance over a range of communication channels. Polar codes have been shown to be quite compatible with communication systems using MLC, as the rate allocation of the component polar codes follows the natural polarization inherent in polar codes. MLC based techniques have not yet been studied in systems that use spatial modulation (SM). SM makes the polar code design difficult as the spatial bits actually select a channel index for transmission. To solve this problem, we propose a Monte Carlo based evaluati…
We develop a low-complexity coding scheme to achieve covert communications over binary-input discrete memoryless channels (BI-DMCs). We circumvent the impossibility of covert communication with linear codes by introducing non-linearity through the use of pulse position modulation (PPM) and multilevel coding (MLC). We show that the MLC-PPM scheme exhibits many appealing properties; in particular, the channel at a given index level remains stationary as the number of level increases, which allows one to use families of channel capacity- and channel resolvability-achieving codes to concretely ins…
The capacity of the AWGN broadcast channel is achieved by superposition coding, but superposition of individual coded modulations expands the modulation alphabet and distorts its configuration. Coded modulation over a broadcast channel subject to a specific channel-input modulation constraint remains an important open problem. Some progress has been made in the related area of unequal-error protection modulations which can be considered single-user broadcast transmission, but it does not approach all points on the boundary of the capacity region. This paper studies broadcast coded modulation u…
Compress-forward (CF) relays can improve communication rates even when the relay cannot decode the source signal. Efficient implementation of CF is a topic of contemporary interest, in part because of its potential impact on wireless technologies such as cloud-RAN. There exists a gap between the performance of CF implementations in the high spectral efficiency regime and the corresponding information theoretic achievable rates. We begin by re-framing a dilemma causing this gap, and propose an approach for its mitigation. We utilize trellis coded quantization (TCQ) at the relay together with mu…
A framework is proposed that allows for a joint description and optimization of both binary polar coding and $2^m$-ary digital pulse-amplitude modulation (PAM) schemes such as multilevel coding (MLC) and bit-interleaved coded modulation (BICM). The conceptual equivalence of polar coding and multilevel coding is pointed out in detail. Based on a novel characterization of the channel polarization phenomenon, rules for the optimal choice of the labeling in coded modulation schemes employing polar codes are developed. Simulation results regarding the error performance of the proposed schemes on th…
The performance of bit-interleaved coded modulation (BICM) with bit shaping (i.e., non-equiprobable bit probabilities in the underlying binary code) is studied. For the Gaussian channel, the rates achievable with BICM and bit shaping are practically identical to those of coded modulation or multilevel coding. This identity holds for the whole range of values of signal-to-noise ratio. Moreover, the random coding error exponent of BICM significantly exceeds that of multilevel coding and is very close to that of coded modulation.
The joint design of input constellation and low-density parity-check (LDPC) codes to approach the symmetric capacity of the two-user Gaussian multiple access channel is studied. More specifically, multilevel coding is employed at each user to construct a high-order input constellation and the constellations of the users are jointly designed so as to maximize the multiuser shaping gain. At the receiver, each layer of the multilevel coding is jointly decoded among users, while successive cancellation is employed across layers. The LDPC code employed by each user in each layer is designed using E…
Fourier Transform Interferometry (FTI) is an interferometric procedure for acquiring HyperSpectral (HS) data. Recently, it has been observed that the light source highlighting a (biologic) sample can be coded before the FTI acquisition in a procedure called Coded Illumination-FTI (CI-FTI). This turns HS data reconstruction into a Compressive Sensing (CS) problem regularized by the sparsity of the HS data. CI-FTI combines the high spectral resolution of FTI with the advantages of reduced-light-exposure imaging in biology. In this paper, we leverage multilevel sampling scheme recently developed …
Slow fading broadcast channels can model a wide range of applications in wireless networks. Due to delay requirements and the unavailability of the channel state information at the transmitter (CSIT), these channels for many applications are non-ergodic. The appropriate measure for designing signals in non-ergodic channels is the outage probability. In this paper, we provide a method to optimize STBCs based on the outage probability at moderate SNRs. Multilevel polar coded-modulation is a new class of coded-modulation techniques that benefits from low complexity decoders and simple rate matchi…
A polar-coded modulation scheme for deep-space optical communication is proposed. The photon counting Poisson channel with pulse position modulation (PPM) is considered. We use the fact that PPM is particularly well suited to be used with multilevel codes to design a polar-coded modulation scheme for the system in consideration. The construction of polar codes for the Poisson channel based on Gaussian approximation is demonstrated to be accurate. The proposed scheme uses a cyclic redundancy check outer code and a successive cancellation decoder with list decoding and it is shown that it outper…
The subspace channel was introduced by Koetter and Kschischang as an adequate model for the communication channel from the source node to a sink node of a multicast network that performs random linear network coding. So far, attention has been given to one-shot subspace codes, that is, codes that use the subspace channel only once. In contrast, this paper explores the idea of using the subspace channel more than once and investigates the so called multishot subspace codes. We present definitions for the problem, a motivating example, lower and upper bounds for the size of codes, and a multilev…
Coded caching is an information theoretic scheme to reduce high peak hours traffic by partially prefetching files in the users local storage during low peak hours. This paper considers heterogeneous decentralized caching systems where cache of users and content library files may have distinct sizes. The server communicates with the users through a Gaussian broadcast channel. The main contribution of this paper is a novel modulation strategy to map the multicast messages generated in the coded caching delivery phase to the symbols of a signal constellation, such that users can leverage their ca…
Lattice codes are elegant and powerful structures that not only can achieve the capacity of the AWGN channel but are also a key ingredient to many multiterminal schemes that exploit linearity properties. However, constructing lattice codes that can realize these benefits with low complexity is still a challenging problem. In this paper, efficient encoding and decoding algorithms are proposed for multilevel binary LDPC lattices constructed via Construction D' whose complexity is linear in the total number of coded bits. Moreover, a generalization of Construction D' is proposed that relaxes some…
In this paper, we design and compare multilevel polar coding (MLPC) and bit-interleaved polar coded modulation (BIPCM) for uplink sparse code multiple access (SCMA) systems that operate over fast and block fading channels. Both successive cancellation (SC) and successive cancellation list (SCL) decoding algorithms are considered. Simulation results show that, with either decoder, BIPCM performs better than its MLPC counterpart. Also, both BIPCM and MLPC exhibit a performance advantage over LTE turbo-coded and WiMAX LDPC SCMA systems when the SCL technique is used for decoding.
Bit-interleaved coded modulation (BICM) and multilevel coded modulation (MLC) are commonly used to combine polar codes with high order modulation. While BICM benefits from simple design and the separation of coding and modulation, MLC shows better performance under successive-cancellation decoding. In this paper we propose a hybrid polar coded modulation scheme that lies between BICM and MLC, wherein a fraction of bits are assigned to set-partition (SP) labeling and the remaining bits are assigned for Gray labeling. The SP labeled bits undergo sequential demodulation, using iterative demodulat…
We consider the problem of using polar codes with higher order modulation over AWGN channels. Unlike prior work, we focus on using modulation independent polar codes. That is, the polar codes are not re-designed based on the modulation used. Instead, we propose bit-permuted coded modulation (BPCM): a technique for using the multilevel coding (MLC) approach for an arbitrary polar code. The BPCM technique exploits a natural connection between MLC and polar codes. It involves applying bit permutations prior to mapping the polar code to a higher order modulation. The bit permutations are designed,…
The polar codes are proven to be capacity-achieving and are shown to have equivalent or even better finite-length performance than the turbo/LDPC codes under some improved decoding algorithms over the additive white Gaussian noise (AWGN) channels. Polar coding is based on the so-called channel polarization phenomenon induced by a transform over the underlying binary-input channel. The channel polarization is found to be universal in many signal processing problems and has been applied to the coded modulation schemes. In this paper, the channel polarization is further extended to the multiple a…
Typically, forward error correction (FEC) codes are designed based on the minimization of the error rate for a given code rate. However, for applications that incorporate hybrid automatic repeat request (HARQ) protocol and adaptive modulation and coding, the throughput is a more important performance metric than the error rate. Polar codes, a new class of FEC codes with simple rate matching, can be optimized efficiently for maximization of the throughput. In this paper, we aim to design HARQ schemes using multilevel polar coded-modulation (MLPCM). Thus, we first develop a method to determine a…
Efficient constellation design is important for improving performance in communication systems. The problem of multidimensional constellation design has been studied extensively in the literature in the context of multidimensional coded modulation and space-time coded MIMO systems. Such constellations are formally called as lattice codes, where a finite set of points from a certain high dimensional lattice is chosen based on some criteria. In this paper, we consider the problem of constellation/signal set design for media-based modulation (MBM), a recent MIMO channel modulation scheme with pro…
In this paper, we propose a new class of nonbinary polar codes with two-stage polarization for ultra-reliable and low-latency communications (URLLC), where the outer (symbol-level) polarization is achieved by using a 2X2 q-ary matrix [1 0; β1] as the kernel and the inner (bit-level) polarization is achieved by a binary polarization matrix for each input symbol. With the two-stage polarization, bit-level code construction is introduced, resulting in partially-frozen symbols, where the frozen bits in these symbols can be used as active-check bits to facilitate the decoder. The encoder/decoder of…
The majority of modern communication systems adopts quadrature amplitude modulation (QAM) constellations as transmission schemes. Due to their square structure, however, QAM do not provide satisfying protection to phase noise effects as the number of constellation points grows, increasing at the same time their peak to average power ratio (PAPR). This requires an expensive power amplifier and oscillator at the transmitter to guarantee low distortion, complicating the adoption of dense transmission schemes in practical high-data rate systems. In this paper, we construct a coded modulation schem…
