For most acoustic metamaterials, once they have been fabricated, their operating frequencies and functions cannot be adjusted, which is an intrinsic barrier for development of realistic applications. The study to overcome this limit has become a significant issue in acoustic metamaterial engineering. Although with the advance of metamaterials in the past two decades, a series of methods such as electric or magnetic control have been proposed, most of them can only work in the condition of no fluid passage. Some metamaterials with large transmission losses have been proposed, but the sounds are essentially reflected rather than absorbed. Here, to overcome this intrinsic difficulty, we propose a ventilated sound absorber that can be manually tuned in a large range after being manufactured. During the tuning which is achieved through an intricately designed slider, high-performance absorption and ventilation are both ensured. The tunable ventilated sound absorber is demonstrated experimentally and the effective model of coupled lossy oscillators can be employed to understand its mechanism. The manually tunable ventilated metamaterial has the potential application values in various complicated pipe systems that require frequency adjustment and it also establishes the foundation for future development of active tunable ventilated acoustic metamaterials.
High-efficiency absorption of low-frequency sounds (< 1000 Hz) while maintaining a free flow of fluids remains a significant challenge in acoustical engineering due to the rigid trade-off between absorption and ventilation performances. Although ongoing advances in acoustic metamaterials have unlocked unprecedented possibilities and various metamaterial absorbers have been proposed, most of them only work adequately in the condition of no sound transmissions. Unfortunately, such condition requires a complete block of fluid channels due to longitudinal nature of sounds, which allows them to pen…
We demonstrate a ventilated metamaterial absorber operating at low frequency (< 500 Hz).With only two layers of the absorption units, high-efficiency absorption (> 90%) has been achieved in both simulations and experiments. This high-efficiency absorption under ventilation condition is originated from the weak coupling of the two identical split tube resonators constituting the absorber, which leads to the hybridization of the degenerate eigenmodes and breaks the absorption upper limit of 50% for conventional transmissive symmetric acoustic absorbers. The absorber can also be extended to an ar…
Absorbing materials in ultra-high frequency (UHF) band has constantly been a major challenge. The size of the absorber in UHF band is large, whereas the resonant frequency band is narrow. According to Rozanov's theory, two kinds of composite metamaterial absorbers are designed to realize the requirements of low-frequency broadband metamaterial microwave absorber: the magnetic-metamaterial composite absorber1 (MA1) and the dielectric-metamaterial composite absorber 2 (MA2). In the range of approximately 300-1000MHz, both absorbers achieve absorption of over 90% and feature good adaptability to …
Solar arrays are the primary energy source of the satellite. In this paper, a metamaterial absorber for solar arrays with simultaneous high optical transparency and broadband microwave absorption is presented. By tailoring the reflection response of meta-atoms, 85% absorption performance from 6.8GHz to 18GHz is obtained. In the meantime, by employing transparent substrates, including indium tin oxide (ITO) film and anti-reflection glass, a maximum of 87% light transmittance is achieved. The absorptivity of the proposed metamaterial absorber is simulated and measured experimentally. Light trans…
Increasing attention on microwave ultra-broadband metamaterial absorbers has been paid due to their promising applications. While most microwave ultra-broadband metamaterial absorbers developed so far are based on metallic resonant structures, dispersive dielectric water-based metamaterial opens a simpler and more versatile route for the construction of polarization- and angle- insensitive ultra-broadband absorption. Here, we review the recent progresses of water-based metamaterial absorber by providing an illustration of the mechanisms to realize ultra-broadband, tunable and multi-functional …
Noise pollution remains a challenging problem requiring the development of novel systems for noise insulation. Extensive work in the field of acoustic metamaterials has led to occurrence of various ventilated structures which, however, are usually demonstrated for rather narrow regions of the audible spectrum. In this work, we further extend the idea of metamaterial-based systems developing a concept of a metahouse chamber representing a ventilated structure for broadband noise insulation. Broad stop bands originate from strong coupling between pairs of Helmholtz resonators constituting the st…
In this paper, a superlattice VO2/SiO2 metamaterial on a lossy substrate is designed to create a near perfect absorber with tunability across the infrared spectrum. We selected VO2 as it presents a dielectric to metal-like phase change slightly above room temperature. Additionally, the slightly lossy nature of high-temperature VO2 presents comparable and small components (real and imaginary) of the complex refractive index across portions of the visible and infrared. Coupled with a limited conductivity substrate, VO2 has been employed to create highly absorbing/emitting structures where the th…
By using a structured tungsten-polyurethane composite that is impedance-matched to water while simultaneously having a much slower longitudinal sound speed, we have theoretically designed, and experimentally realized, an underwater acoustic absorber exhibiting high absorption from 4 to 20 kHz, measured in a 5.6m times 3.6m water pool with the time-domain approach. The broadband functionality is achieved by optimally engineering the distribution of the Fabry-Perot resonances, based on an integration scheme, to attain impedance matching over a broad frequency range. The average thickness of the …
We propose a thin, compact, broadband, polarization and angle insensitive metamaterial absorber based on a tungsten reflector, silicon spacer and a top pattern composed of a double square-like ring resonator utilizing nickel(Ni). In such a structure, a high absorption (above 80 %) bandwidth ~ 4.8 μm from 3.52 up to 8.32 μm corresponding to the relative bandwidth ~81% can be achieved with deeply subwavelength unit cell dimensions. Here the physical origin of the broadband absorption is associated with low Q-factor dipole modes of the top pattern inner and outer sides functioning as rectangular …
Terahertz (THz) metamaterials have been developed for THz sensing, detection, imaging, and many other functions due to their unusual absorbers. However, the unusual absorption spectra change with different incident angles. Thus, we designed and fabricated a focal plane array with metal-insulator-metal (MIM) structure metamaterial absorbers for further research. The absorption spectrum with incident angles from 20 to 60 was measured using THz time-domain spectroscopy (THz-TDS), and the experimental results reveal that the absorption spectrum changes with incident angle variations. A basic analy…
Metamaterial-based absorbers have been extensively investigated in the terahertz (THz) range with ever increasing performances. In this paper, we propose an all-dielectric THz absorber based on doped silicon. The unit cell consists of a silicon cross resonator with an internal cross-shaped air cavity. Numerical results suggest that the proposed absorber can operate from THz to mid-infrared, having an average power absorption of >95% between 0.6 and 10 THz. Experimental results using THz time-domain spectroscopy show a good agreement with simulations. The underlying mechanisms for broadband abs…
In this paper, a liquid reconfigurable stealth window constructed by metamaterial absorber at microwave band is proposed. The stealth window consists of an anti-reflection glass with indium tin oxide (ITO) as resistive film and a liquid container made of polymethyl methacrylate (PMMA). Since the materials constituting the window are all transparent, the metamaterials that can be switched through the liquid control system can always maintain high light transmission. The proposal can obtain a transmission passband from 2.3 GHz to 5 GHz with low insertion loss, especially at 2.45 GHz and 5 GHz wi…
The implementation of terahertz (THz) wafer-level metadevices is critical to advance the science for applications including (I) integrated focal plane array which can image for biology and (II) integrated narrowband absorbers for high spectral resolution THz spectroscopy. Substantial progress has been made in the development of THz metamaterials; however, a wafer-level low-stress THz metadevices platform remains a challenge. This paper experimentally demonstrates a substrate-free THz metadevices platform adopting engineered Si-rich and low-stress silicon nitride (SiNx) thin films, achieving an…
This work experimentally studies silicon-cored tungsten nanowire selective metamaterial absorber to enhance solar-thermal energy harvesting, simply fabricated by conformally coating a thin tungsten layer onto a commercial silicon nanowire stamp. Scanning electron microscopy is used to characterize the morphology change before and after the tungsten deposition, while optical spectroscopy is carried out to measure the spectral absorptance (or emittance) in the broad wavelength range from solar spectrum to infrared. It is shown that the tungsten nanowire absorber exhibits almost the same total so…
We propose herein a method of material-structure integrated design for broadband absorption of dielectric metamaterial, which is achieved by combination of genetic algorithm and simulation platform. A multi-layered metamaterial absorber with an ultra-broadband absorption from 5.3 to 18 GHz (a relative bandwidth of as high as 109%) is realized numerically and experimentally. In addition, simulated results demonstrate the proposed metamaterial exhibits good incident angle and polarization tolerance, which also are significant criteria for practical applications. By investigating the working prin…
Ultrawide-angle electromagnetic wave absorbers with excellent mechanical properties are required in many diverse applications such as sensing, and stealth technologies. Here, a novel 3D reconfigurable metamaterial absorber (MMA) consisting of honeycomb and VO2 films is proposed. The proposed MMA exhibits a strong absorptivity above 90\% in the widest incident angle up to $87^\circ$ for TM- and TE- polarized oblique incidences for THz wave propagating in yoz-plane. According to simulation results, under normal incidence, when VO2 films are in the insulating state, the proposed absorber exhibits…
While the design of always new metamaterials with exotic static and dynamic properties is attracting deep attention in the last decades, little effort is made to explore their interactions with other materials. This prevents the conception of (meta-)structures that can enhance metamaterials' unorthodox behaviours and that can be employed in real engineering applications. In this paper, we give a first answer to this challenging problem by showing that the relaxed micromorphic model with zero static characteristic length can be usefully applied to describe the refractive properties of simple me…
We present a guide for the design and fabrication of a CMOS-compatible metamaterial microstructure as an absorber of visible light with exceptionally high absorption efficiency (~ 98%), for wavelengths 400nm-700nm. The structural parameters of the microstructure have been optimized by using Finite Element method (FEM) based COMSOL multyphysics software simulations. An optimized 2D unit cell of the structure consists of 4um by 160 nm TiN base on glass substrate covered with 70 nm thick silicon dioxide (SiO2). A periodic structure of titanium nitride (TiN) straps (each of 90 nm thick and 2-micro…
We theoretically investigate photothermal heating of ultra-flexible metamaterials, which are obtained by randomly mixing TiN nanoparticles in polydimethylsiloxane (PDMS). Due to the plasmonic properties of TiN nanoparticles, incident light is perfectly absorbed in a broadband range (300-3000 nm) to generate heat within these metamaterials. Under irradiation of an 808 nm near-infrared laser with different intensities, our predicted temperature rises as a function of time agree well with recent experimental data. For a given laser intensity, the temperature rise varies non-monotonically with con…
Conventional multistatic radar systems using microwave and millimeter-wave (mm-wave) frequencies seek to reconstruct the target in the imaging domain, employing many transmitting and receiving antenna elements. These systems are suboptimal, in that they do not take into consideration the large mutual information existing between the measurements. This work reports a new mm-wave radar system for high sensing capacity applications. The system is composed of a Compressive Reflector Antenna (CRA), whose surface is specially tailored by digitized Metamaterial Absorbers (MMAs). The MMA elements are …
Engineered optical absorbers are of substantial interest for applications ranging from stray light reduction to energy conversion. We demonstrate a large-area (centimeter-scale) metamaterial that features near-unity frequency-selective absorption in the mid-infrared wavelength range. The metamaterial comprises a self-assembled porous structure known as an inverse opal, here made of silica. The structure's large volume fraction of voids, together with the vibrational resonances of silica in the mid-infrared spectral range, reduce the metamaterial's refractive index to close to that of air and i…
Designing broadband metamaterial perfect absorbers is challenging due to the intrinsically narrow bandwidth of surface plasmon resonances. Here, the paper reports an ultra-broadband metamaterial absorber by using space filling Gosper curve. The optimized result shows an average absorptivity of 95.78% from 2.64 to 9.79 μm across the entire mid-infrared region. Meanwhile, the absorber shows insensitivity to the polarization angle and the incident angle of the incident light. The underlying physical principles, used in our broadband absorber, involve a fractal geometry with multiple scales and a …
Complete absorption of electromagnetic waves is paramount in today's applications, ranging from photovoltaics to cross-talk prevention into sensitive devices. In this context, we use a genetic algorithm (GA) strategy to optimize absorption properties of periodic arrays of truncated square-based pyramids made of alternating stacks of metal/dielectric layers. We target ultra-broadband quasi-perfect absorption of normally incident electromagnetic radiations in the visible and near-infrared ranges (wavelength comprised between 420 and 1600 nm). We compare the results one can obtain by considering …
Aligned, densely-packed carbon nanotube metamaterials prepared using vacuum filtration are an emerging infrared nanophotonic material. We report multiple hyperbolic plasmon resonances, together spanning the mid-infrared, in individual resonators made from aligned and densely-packed carbon nanotubes. In the first near-field scanning optical microscopy (NSOM) imaging study of nanotube metamaterial resonators, we observe distinct deeply-subwavelength field profiles at the fundamental and higher-order resonant frequencies. The wafer-scale area of the nanotube metamaterials allows us to combine thi…
The unusual viscoelastic properties of silica aerogel plates are efficiently used to design subwavelength perfect sound absorbers. We theoretically, numerically and experimentally report a perfect absorbing metamaterial panel made of periodically arranged resonant building blocks consisting of a slit loaded by a clamped aerogel plate backed by a closed cavity. The impedance matching condition is analyzed using the Argand diagram of the reflection coefficient, i.e., the trajectory of the reflection coefficient as a function of frequency in the complex plane. The lack or excess of losses in the …
For dielectric multilayered metamaterials, the effective-parameter representation is known to be insensitive to geometrical features occurring at deeply subwavelength scales. However, recent studies on periodic and aperiodically ordered geometries have shown the existence of certain critical parameter regimes where this conventional wisdom is upended, as the optical response of finite-size samples may depart considerably from the predictions of standard effective-medium theory. In these regimes, characterized by a mixed evanescent/propagating light transport, different classes of spatial (dis)…
