The unusual viscoelastic properties of silica aerogel plates are efficiently used to design subwavelength perfect sound absorbers. We theoretically, numerically and experimentally report a perfect absorbing metamaterial panel made of periodically arranged resonant building blocks consisting of a slit loaded by a clamped aerogel plate backed by a closed cavity. The impedance matching condition is analyzed using the Argand diagram of the reflection coefficient, i.e., the trajectory of the reflection coefficient as a function of frequency in the complex plane. The lack or excess of losses in the system can be identified via this Argand diagram in order to achieve the impedance matching condition. The universality of this tool can be further exploited to design more complex metasurfaces for perfect sound absorption, thus allowing the rapid design of novel and efficient absorbing metamaterials.
The ability to generate, amplify, mix, and modulate sound with no harmonic distortion in a passive opto-acoustic device would revolutionize the field of acoustics. The photo-thermo-acoustic (PTA) effect allows to transduce light into sound without any bulk electro-mechanically moving parts and electrical connections, as for conventional loudspeakers. Also, PTA devices can be integrated with standard silicon complementary metal-oxide semiconductor (CMOS) fabrication techniques. Here, we demonstrate that the ultimate PTA efficiency of graphene aerogels, depending on their particular thermal and …
Metasurfaces with planar profile and wave front shaping capabilities would be ideally suitable to improve the performance of acoustic wave-based applications. It is significant that the general Snell's law provides a new approach to engineer the phase profile of reflected acoustic wave. Here, we present a new type of acoustic metasurface based on three-component composites which contain a steel ball coated with a thin elliptical layer of silicone rubber and embedded in epoxy. The acoustic metasurface with changeable radii of steel balls can realize the anomalous reflections, a planar acoustic …
This paper describes a new kind of acoustic metasurface with multiply resonant units, which have previously been used to induce multiple resonances and effectively produce negative mass density and bulk/shear moduli. The proposed acoustic metasurface can be constructed using real materials and does not rely on an ideal rigid material. Therefore, it can work well in a water background. The thickness of the acoustic metasurface is about two orders of magnitude smaller than the acoustic wavelength in water. The design of a unit group is proposed to avoid the phase discretization becoming too fine…
Previous research has attempted to minimize the influence of loss in reflection- and transmission-type acoustic metasurfaces. This letter shows that, by treating the acoustic metasurface as a non-Hermitian system and by harnessing loss, unconventional wave behaviors that do not exist in lossless metasurfaces can be uncovered. Specifically, we theoretically and experimentally demonstrate a non-Hermitian acoustic metasurface mirror featuring extremely asymmetrical reflection at the exception point. As an example, the metasurface mirror is designed to have high-efficiency retro-reflection when th…
We propose the design and measurement of an acoustic metasurface retroreflector that works at three discrete incident angles. An impedance model is developed such that for acoustic waves impinging at -60 degrees, the reflected wave is defined by the surface impedance of the metasurface, which is realized by a periodic grating. At 0 and 60 degrees, the retroreflection condition can be fulfilled by the diffraction of the surface. The thickness of the metasurface is about half of the operating wavelength and the retroreflector functions without parasitic diffraction associated with conventional g…
We propose a nonlinear acoustic metasurface concept by exploiting the nonlinearity of the locally resonant unit cells formed by curved beams. The analytical model is established to explore the nonlinear phenomenon, specifically the second-harmonic generation (SHG) of the acoustic waveguide and validated through numerical and experimental studies. Novel nonlinear acoustic metasurfaces are developed to demultiplex different frequency components and achieve anomalous wavefront control of SHG in the transmitted region. To this end, we demonstrate wave steering, wave focusing, and self-bending prop…
In this work, we develop the gradient metasurface is constructed of a locally anisotropic resonant structure, comprising a steel cylinder with an elliptical rubber coating embedded in epoxy. The deflective angles of rubber ellipses in the locally anisotropic resonant unit provide a method of controlling the reflected phase. Phase shifts of the reflected wave can cover the 2pi range. With an appropriate design of the phase profiles along the acoustic metasurface, we can achieve anomalous reflection and Bessel beam. The locally anisotropic resonant units have significant potential for engineerin…
The manipulation of sound with acoustic metamaterials is a field of intense research, where interaction via resonance is a common application despite the significant disadvantages. We propose a novel procedure for introducing well-designed coupling interfaces with a cell size of less than 10 nm into an ultra-soft porous medium, to prepare a meta-aerogel, where the sound propagation is significantly delayed in a non-resonant mode. The resultant sound velocity is shown as a scaling law with the mass density and the mass fraction ratio of the components, in accordance with our analytical model. W…
Previously reported acoustic metasurfaces that consist of fixed channels, are untunable to meet the broadband requirement and alterable functionalities. To overcome this limitation, we propose screw-and-nut mechanism of tunability and design a type of continuously tunable acoustic metasurface with unit components of helical cylinders which are screwed into a plate. The spiral channel length can be tuned continuously by the screwed depth; and then a metasurface with continuously tunable acoustic phase at independent pixels is attained. Different distributions of the unit components can shape an…
We introduce a multi-coiled acoustic metasurface providing a quasi-perfect absorption (reaching 99.99% in experiments) at extremely low-frequency of 50 Hz, and simultaneously featuring an ultrathin thickness down to λ/527 (1.3 cm). In contrast to the state of the art, this original conceived multi-coiled metasurface offers additional degrees of freedom capable to tune the acoustic impedance effectively without increasing the total thickness. We provide analytical derivation, numerical simulation and experimental demonstrations for this unique absorber concept, and discuss its physical mechanis…
We design extremely-thin acoustic metasurfaces, providing a versatile platform for the manipulation of reflected pressure fields, that are constructed from mass loads and stretched membranes fixed to a periodic rigid framework. These metasurfaces demonstrate deeply subwavelength control and can have thicknesses an order of magnitude less than those based around Helmholtz resonators. Each sub-unit of the metasurface is resonant at a frequency tuned geometrically, this tunability provides phase control and using a set of finely tuned membrane resonators we create a phase-grating metasurface. Thi…
Over the last couple of years, the digital coding acoustic metasurfaces have been developed rapidly as a highly active research area for their unique and flexible manipulation of acoustic wavefronts. Nevertheless, all recent attentions in the acoustic community have been mainly concentrated on space-encoded architectures, leaving the room free for benefiting from the unique features of spatiotemporally modulated metasurfaces. By entering the world of time, here, we propose a space-time-coding acoustic digital metasurface with exotic ability to dynamically transfer the energy of the carrier aco…
Typical acoustic refractive metasurfaces governed by generalized Snell law require several types of subwavelength subunits to provide an extra phase gradient along the surface. This design strategy, however, has several kinds of drawback. For instance, the inevitable viscous loss brought out by the complex subwavelength subunits, and the negligence of the coupling between adjacent subunits which leads to low-efficiency in wavefront manipulation, especially for large angles. To overcome these limitations, we propose a new type of refractive metasurface composed of only one straight channel and …
As the dominant information carrier in water, acoustic wave is widely used for underwater detection, communication and imaging. Even though underwater acoustic communication has been greatly improved in the past decades, it still suffers from the slow transmission speed and low information capacity. The recently developed acoustic orbital angular momentum (OAM) multiplexing communication promises a high efficiency, large capacity and fast transmission speed for acoustic communication. However, the current works on OAM multiplexing communication mainly appears in airborne acoustics. The applica…
We report the experimental demonstration of tunable asymmetric acoustic metasurfaces with extreme contrast, made by two decorated membrane resonators (DMRs) coupled via a sealed air column. The front side of the metasurface is impedance matched to air and perfectly absorbing, while the backside is hard and totally reflecting. When a suitable DC voltage is applied to the backside DMR with proper electrodes, the surface impedance of the back side of the metasurfaces can be tuned from one extreme to the other, such that the backside becomes impedance matched to air and totally absorbing, while th…
We theoretically and experimentally propose two designs of broadband low-frequency acoustic metasurface absorbers (Sample I/Sample II) for the frequency ranges of 458Hz~968Hz and 231Hz~491Hz (larger than 1 octave), with absorption larger than 0.8, and having the ultra-thin thickness of 5.2cm and 10.4cm respectively (λ/15 for the lowest working frequency and λ/7.5 for the highest frequency). The designed supercell consists of 16 different unit cells corresponding to 16 eigen frequencies for resonant absorptions. The coupling of multiple resonances leads to broadband absorption effect in the ful…
Waves impart momentum and exert force on obstacles in their path. The transfer of wave momentum is a fundamental mechanism for contactless manipulation, yet the rules of conventional scattering intrinsically limit the radiation force based on the shape and the size of the manipulated object. Here, we show that this intrinsic limit can be overcome for acoustic waves with subwavelength-structured metasurfaces, where the force becomes controllable by the arrangement of surface features, independent of the object's overall shape and size. Harnessing such anomalous metasurface scattering, we demons…
In this work, we propose a design of acoustic meta-surfaces in sub-wavelength scale enabling independent modulations of phase and amplitude. Each unit cell of the acoustic meta-surface consists of simple conventional space-coiling structure added with an air layer, which can be analyzed as two equivalent slabs with non-dispersion effective parameters. The amplitude depends on the space-coiling structure regardless of the air layer, and the phase can be further adjusted by the air layer independent to the amplitude. The acoustic meta-surface covers an entire phase change of 2-pi and amplitude c…
Metasurface with gradient phase response offers new alternative for steering the propagation of waves. Conventional Snell's law has been revised by taking the contribution of local phase gradient into account. However, the requirement of momentum matching along the metasurface sets its nontrivial beam manipulation functionality within a limited-angle incidence. In this work, we theoretically and experimentally demonstrate that the acoustic gradient metasurface supports the negative reflection for all-angle incidence. The mode expansion theory is developed to help understand how the gradient me…
Metasurfaces formed of arrays of subwavelength resonators are often tuned to 'critically couple' with incident radiation, so that at resonance dissipative and radiative damping are balanced and absorption is maximised. Such design criteria are typically derived assuming an infinite metasurface, whereas the absorption characteristics of finite metasurfaces, even very large ones, can be markedly different in certain frequency intervals. This is due to the excitation of surface waves, intrinsic to resonant metasurfaces, and especially meta-resonances, namely collective resonances where the surfac…
Ventilation barriers allowing simultaneous sound blocking and free airflow passage are of great challenge but necessary for particular scenarios calling for sound-proofing ventilation. Previous works based on local resonance or Fano-like interference serve a narrow working range around the resonant or destructive-interference frequency. Efforts made on broadband designs show a limited bandwidth typically smaller than half an octave. Here, we theoretically design an ultra-broadband ventilation barrier via hybridizing dissipation and interference. Confirmed by experiments, the synergistic effect…
Recent advances in metasurfaces have shown the importance of controlling the bianisotropic response of the constituent meta-atoms for maximum efficiency wavefront transformation. Under the paradigm of a bianisotropic metasurface, full control of the local scattering properties is allowed opening new design avenues for creating reciprocal metasurfaces. Despite recent advances in the perfect transformation of both electromagnetic and acoustic plane waves, the importance of bianisotropic metasurfaces for transforming cylindrical waves is still unexplored. Motivated by the possibility of arbitrari…
The manipulation of acoustic waves plays an important role in a wide range of applications. Currently, acoustic wave manipulation typically relies on either acoustic metasurfaces or phased array transducers. The elements of metasurfaces are designed and optimized for a target frequency, which thus limits their bandwidth. Phased array transducers, suffering from high-cost and complex control circuits, are usually limited by the array size and the filling ratio of the control units. In this work, we introduce active coding piezoelectric metasurfaces; demonstrate commonly implemented acoustic wav…
In this paper, we propose a continuously tunable acoustic metasurface composed of identical anisotropic resonant units, each of which contains a rigid pedestal and a rotatable inclusion with space coiling-up structure. The metasurface can manipulate the reflected phase by adjusting the rotational angle of inclusion. The theoretical analysis shows that the polarization-dependent phase change can be induced by the even-order standing wave modes inside inclusion. By utilizing the rotatable inclusion, we design a tunable acoustic carpet cloaking device, which works with a wide range for incident a…
Invisibility or unhearability cloaks have been made possible by using metamaterials making light or sound flow around obstacle without the trace of reflections or shadows. Metamaterials are known for being flexible building units that can mimic a host of unusual and extreme material responses, which are essential when engineering artificial material properties to realize a coordinate transforming cloak. Bending and stretching the coordinate grid in space requires stringent material parameters, therefore, small inaccuracies and inevitable material losses become sources for unwanted scattering t…
Negative refraction plays an important role in acoustic wave manipulation and imaging. However, conventional systems based on acoustic metamaterials suffer from the limits induced by loss-related and resolution issues. In this work, a parity-time (PT)-symmetric system is introduced to realize loss-free bidirectional acoustic negative refraction. The system is composed of a pair of locally PT-symmetric multi-layer metasurfaces sandwiching a region of free space, which also forms a global PT-symmetry. The property of bidirectional negative refraction, which is rare for regular PT-symmetric struc…
Towards optimal spatiotemporal wavefront shaping for the cocktail party problem with inverse design of an acoustic reconfigurable metasurface in disordered media
A broadband sound absorption attained by a deep-subwavelength structure is of great interest to the noise control community especially for extremely low frequencies (20-100 Hz) in room acoustics. Coupling multiple different resonant unit cells has been an effective strategy to achieve a broadband sound absorption. In this paper, we report on an analytical, numerical and experimental study of a low-frequency broadband (50-63 Hz, one third octave band), high absorption (average absorption coefficient around 93%), near-omnidirectional (0°-75°) acoustic metasurface absorber composed of 4 coupled u…
In this paper, we report on the observation of nonlinear effects in a nanostrip phononic metasurface (NPM) that enable the tuning of resonance frequencies at 1.42 GHz. The NPM resonator made of periodic nanostrip array is fabricated on a lithium niobate substrate. Each of the nanostrip is 250-nm wide and is made of 680-nm-thick SiO2 layer stacking on 50-nm Al metal electrodes. Finite element analysis reveals that the device operates in a vertically polarized (compression) mode with substantial acoustic energy confined in the nanostrips, leading to a local resonance at low acoustic velocity. Du…
Metasurfaces, the ultrathin media with extraordinary wavefront modulation ability, have shown versatile potential in manipulating waves. However, existing acoustic metasurfaces are limited by their narrow-band frequency-dependent capability, which severely hinders their real-world applications that usually require customized dispersion. To address this bottlenecking challenge, we report ultra-broadband achromatic metasurfaces that are capable of delivering arbitrary and frequency-independent wave properties by bottom-up topology optimization. We successively demonstrate three ultra-broadband f…
Recent advances in gradient metasurfaces have shown that only by locally controlling the bianisotropic response of the constituent cells can one ensure full control of refraction, i.e., arbitrarily modify the direction of the incident waves without producing scattering into unwanted directions. In this work, we propose and experimentally verify the use of a new acoustic cell architecture that provides enough degrees of freedom to fully control the bianisotropic response and minimizes the implementation losses produced by resonant elements. The versatility of the approach is shown through the d…
Traditional sound diffusers are quasi-random phase gratings attached to reflecting surfaces whose purpose is to augment the spatiotemporal incoherence of the acoustic field scattered from reflective surfaces. This configuration allows one to cover a large reflecting surface by periodically tiling the diffuser unit cells to cover a large area while reducing undesirable specular reflection for incident plane waves. However, the periodic arrangement of the unit cells leads to coherent constructive and destructive interference in the scattered field in some directions which is undesirable for achi…
The intrinsic limitation of the material nonlinearity inevitably results in the poor mode purity, conversion efficiency and real-time reconfigurability of the generated harmonic waves, both in optics and acoustics. Rotational Doppler effect provides us an intuitive paradigm to shifting the frequency in a linear system, which needs to be facilitated by a spiraling phase change upon the wave propagation. Here we numerically and experimentally present a rotating linear vortex metasurface and achieve close-to-unity mode purity (above 95%) and conversion efficiency (above 65%) in audible sound freq…
Metasurfaces have shown unprecedented possibilities for wavefront manipulation of waves. The research efforts have been focused on the development of metasurfaces that perform a specific functionality for waves of one physical nature, for example, for electromagnetic waves. In this work, we propose the use of power-flow conformal metamirrors for creation of multiphysics devices which can simultaneously control waves of different nature. In particular, we introduce metasurface devices which perform specified operations on both electromagnetic and acoustic waves at the same time. Using a purely …
Sound is usually generated in a medium by an electromechanical vibrating structure. The geometrical size and inertia of the structure set the frequency cutoff in the sound-transduction mechanism and, often, different vibrating structures are necessary to cover the whole range from infrasound to ultrasound. An alternative mechanism without any physical movement of the emitter is the thermoacoustic effect, where sound is produced by Joule heating in a conductive material. Here we show that a single thermoacoustic transducer based on a graphene aerogel can emit ultrabroadband sound from infrasoun…
Conventional acoustic metasurfaces are constructed with gradiently ``local'' phase shift profiles provided by subunits. The local strategy implies the ignorance of the mutual coupling between subunits, which limits the efficiency of targeted sound manipulation, especially in complex environments. By taking into account the ``nonlocal'' interaction among subunits, nonlocal metasurface offers an opportunity for accurate control of sound propagation, but the requirement of the consideration of gathering coupling among all subunits, not just the nearest-neighbor coupling, greatly increases the com…
Metasurfaces based on geometric phase acquired from the conversion of the optical spin states provide a robust control over the wavefront of light, and have been widely employed for construction of various types of functional metasurface devices. However, this powerful approach cannot be readily transferred to the manipulation of acoustic waves because acoustic waves do not possess the spin degree of freedom. Here, we propose the concept of acoustic geometric-phase meta-array by leveraging the conversion of orbital angular momentum of acoustic waves, where well-defined geometric-phases can be …
Coherent Perfect Absorber (CPA) and Laser is a pair of inversely worked wave structure satisfying the time-reversal relation. We point out that, if the wave energy absorbed by CPA can be recovered by somewhat way and then be reemitted by its corresponded Laser, their combination can be a wave-controlling device that can "move" the wave energy from one place to another. By extending the concepts of CPA and Laser from the previously studied one-dimensional non-Hermitian systems to the two-dimensional ones, this understanding is used to simplify the designing of the metasurface in this letter. As…
Acoustic metasurfaces manipulate waves with specially designed structures and achieve properties that natural materials cannot offer. Similar surfaces work in audio frequency range as well and lead to marvelous acoustic phenomena that can be perceived by human ears. Being intrigued by the famous Maoshan Bugle phenomenon, we investigate large scale metasurfaces consisting of periodic steps of sizes comparable to the wavelength of audio frequency in both time and space domains. We propose a theoretical method to calculate the scattered sound field and find that periodic corrugated surfaces work …
Requiring neither active components nor complex designs, we propose and experimentally demonstrate a generic framework for undistorted asymmetric elastic-wave transmission in a thin plate just using a layer of lossless metasurface. The asymmetric transmission stems from the uneven diffraction of +1 and -1 orders on opposite sides of the metasurface, respectively. Compared with previous loss-induced strategies, the present metasurface maintains a nearly total transmission for the transportation side, but a total reflection from the opposite side, exhibiting a higher contrast ratio of transmissi…
Acoustic vibrations at the nanoscale (GHz-THz frequencies) and their interactions with electrons, photons and other excitations are the heart of an emerging field in physics: nanophononics. The design of ultrahigh frequency acoustic-phonon transducers, with tunable frequency, and easy to integrate in complex systems is still an open and challenging problem for the development of acoustic nanoscopies and phonon lasers. Here we show how an optimized plasmonic metasurface can act as a high-frequency phonon transducer. We report pump-probe experiments in metasurfaces composed of an array of gold n…
Efficiently receiving underwater sound remotely from air is a long-standing challenge in acoustics hindered by the large impedance mismatch at the water-air interface. Here we introduce and experimentally demonstrate a technique for remote and efficient water-to-air eavesdropping through phase-engineered impedance matching metasurfaces. By judiciously engineering an ultrathin mechanically-rigid boundary, we make the water-air interface acoustically transparent and at the same time we are able to pattern the transmitted wavefront, enabling efficient control over the effective spatial location o…
Although recent advances have made it possible to manipulate electromagnetic and acoustic wavefronts with sub-wavelength metasurface slabs, the design of elastodynamic counterparts remains challenging. We introduce a novel but simple design approach to control SV-waves in elastic solids. The proposed metasurface can be fabricated by cutting an array of aligned parallel cracks in a solid such that the materials between the cracks act as plate-like waveguides in the background medium. The plate array is capable of modulating the phase change of SV-wave while keeping the phase of P-wave unchanged…
Reflector-Free, Highly Confined Love-Like SAWs Enabled by a Phononic Metasurface for Real-Time Monitoring of Cell Dynamics
Université de Lorraine（洛林大学）；CNRS（法国国家科学研究中心）；Centre national d’études spatiales (CNES)（法国国家空间研究中心）；Institut Universitaire de France (IUF)（法兰西学院）；Institut Interdisciplinaire d′Innovation Technologique (3IT), Université de Sherbrooke（舍布鲁克大学跨学科技术创新研究所）；Laboratoire Nanotechnologies Nanosystèmes (LN2)-IRL3463, CNRS, Université de Sherbrooke, INSA Lyon, École Centrale de Lyon, Université Grenoble Alpes（纳米技术与纳米系统实验室）
