Based on photoacoustic effect, photoacoustic tomography is developing very fast in recent years, and becoming an important imaging tool for both preclinical and clinical studies. With enough ultrasound transducers placed around the biological tissue, PAT can provide both deep penetration and high image contrast by hybrid usage of light and sound. However, considering space and measurement environmental limitations, transducers are always placed in a limited-angle way, which means that the other side without transducer coverage suffers severe information loss. With conventional image reconstruction algorithms, the limited-view tissue induces artifacts and information loss, which may cause doctors misdiagnosis or missed diagnosis. In order to solve limited-view PA imaging reconstruction problem, we propose to use both time domain and frequency domain reconstruction algorithms to get delay-and-sum (DAS) image inputs and k-space image inputs. These dual domain images share nearly same texture information but different artifact information, which can teach network how to distinguish these two kinds of information at input level. In this paper, we propose Dual Domain Unet (DuDoUnet) with specially designed Information Sharing Block (ISB), which can further share two domains' information and distinguish artifacts. Besides, we use mutual information (MI) with an auxiliary network, whose inputs and outputs are both ground truth, to compensate prior knowledge of limited-view PA inputs. The proposed method is verified with a public clinical database, and shows superior results with SSIM = 93.5622% and PSNR = 20.8859.
Filtered backprojection (FBP) is an efficient and popular class of tomographic image reconstruction methods. In photoacoustic tomography, these algorithms are based on theoretically exact analytic inversion formulas which results in accurate reconstructions. However, photoacoustic measurement data are often incomplete (limited detection view and sparse sampling), which results in artefacts in the images reconstructed with FBP. In addition to that, properties such as directivity of the acoustic detectors are not accounted for in standard FBP, which affects the reconstruction quality, too. To ac…
Recent advances in photoacoustic (PA) imaging have enabled detailed images of microvascular structure and quantitative measurement of blood oxygenation or perfusion. Standard reconstruction methods for PA imaging are based on solving an inverse problem using appropriate signal and system models. For handheld scanners, however, the ill-posed conditions of limited detection view and bandwidth yield low image contrast and severe structure loss in most instances. In this paper, we propose a practical reconstruction method based on a deep convolutional neural network (CNN) to overcome those problem…
A new development in photoacoustic (PA) imaging has been the use of compact, portable and low-cost laser diodes (LDs), but LD-based PA imaging suffers from low signal intensity recorded by the conventional transducers. A common method to improve signal strength is temporal averaging, which reduces frame rate and increases laser exposure to patients. To tackle this problem, we propose a deep learning method that will denoise the PA images before beamforming with a very few frames, even one. We also present a deep learning method to automatically reconstruct point sources from noisy pre-beamform…
Rensselaer Polytechnic Institute（伦斯勒理工学院）；Michigan State University（密歇根州立大学）
Photoacoustic tomography seeks to reconstruct an acoustic initial pressure distribution from the measurement of the ultrasound waveforms. Conventional methods assume a-prior knowledge of the sound speed distribution, which practically is unknown. One way to circumvent the issue is to simultaneously reconstruct both the acoustic initial pressure and speed. In this article, we develop a novel data-driven method that integrates an advanced deep neural network through model-based iteration. The image of the initial pressure is significantly improved in our numerical simulation.
ShanghaiTech University（上海科技大学）；Chinese Academy of Sciences（中国科学院）；Shanghai Institute of Microsystem and Information Technology（上海微系统与信息技术研究所）；University of Chinese Academy of Sciences（中国科学院大学）
Photoacoustic (PA) imaging is a biomedical imaging modality capable of acquiring high-contrast images of optical absorption at depths much greater than traditional optical imaging techniques. However, practical instrumentation and geometry limit the number of available acoustic sensors surrounding the imaging target, which results in the sparsity of sensor data. Conventional PA image reconstruction methods give severe artifacts when they are applied directly to the sparse PA data. In this paper, we firstly propose to employ a novel signal processing method to make sparse PA raw data more suita…
In an inhomogeneously illuminated photoacoustic image, important information like vascular geometry is not readily available when only the initial pressure is reconstructed. To obtain the desired information, algorithms for image segmentation are often applied as a post-processing step. In this work, we propose to jointly acquire the photoacoustic reconstruction and segmentation, by modifying a recently developed partially learned algorithm based on a convolutional neural network. We investigate the stability of the algorithm against changes in initial pressures and photoacoustic system settin…
For photoacoustic image reconstruction, certain parameters such as sensor positions and speed of sound have a major impact in the reconstruction process and must be carefully determined before data acquisition. Uncertainties in these parameters can lead to errors produced by a modeling mismatch, hindering the reconstruction process and severely affecting the resulting image quality. Therefore, in this work we study how modeling errors arising from uncertainty in sensor locations affect the images obtained by matrix model-based reconstruction algorithms based on time domain and frequency domain…
Super-temporal-resolution Photoacoustic Imaging with Dynamic Reconstruction through Implicit Neural Representation in Sparse-view
School of Information Science and Technology, ShanghaiTech University（信息科学与技术学院，上海科技大学）；School of Biomedical Engineering, ShanghaiTech University（生物医学工程学院，上海科技大学）；School of Biomedical Engineering and Institute of Medical Robotics, Shanghai Jiao Tong University（生物医学工程学院与医学机器人研究所，上海交通大学）；School of Biomedical Engineering, Division of Life Sciences and Medicine, University of Science and Technology of China（生物医学工程学院，生命科学与医学系，中国科学技术大学）；School of Engineering Science, University of Science and Technology of China（工程科学学院，中国科学技术大学）；Suzhou Institute for Advanced Research, University of Science and Technology of China（苏州先进研究所，中国科学技术大学）
George Mason University（乔治梅森大学）；The MITRE Corporation（MITRE公司）
In photoacoustic tomography (PAT), the acoustic pressure waves produced by optical excitation are measured by an array of detectors and used to reconstruct an image. Sparse spatial sampling and limited-view detection are two common challenges faced in PAT. Reconstructing from incomplete data using standard methods results in severe streaking artifacts and blurring. We propose a modified convolutional neural network (CNN) architecture termed Dense Dilation UNet (DD-UNet) for correcting artifacts in 3D PAT. The DD-Net leverages the benefits of dense connectivity and dilated convolutions to impro…
Photoacoustic tomography (PAT) is a newly developed medical imaging modality, which combines the advantages of pure optical imaging and ultrasound imaging, owning both high optical contrast and deep penetration depth. Very recently, PAT is studied in human brain imaging. Nevertheless, while ultrasound waves are passing through the human skull tissues, the strong acoustic attenuation and aberration will happen, which causes photoacoustic signals' distortion. In this work, we use 10 magnetic resonance angiography (MRA) human brain volumes, and manually segment them to obtain the 2D human brain n…
It has previously been demonstrated that model-based reconstruction methods relying on a priori knowledge of the imaging point spread function (PSF) coupled to sparsity priors on the object to image can provide super-resolution in photoacoustic (PA) or in ultrasound (US) imaging. Here, we experimentally show that such reconstruction also leads to super-resolution in both PA and US imaging with arrays having much less elements than used conventionally (sparse arrays). As a proof of concept, we obtained super-resolution PA and US cross-sectional images of microfluidic channels with only 8 elemen…
ShanghaiTech University（上海科技大学）；Chinese Academy of Sciences（中国科学院）；University of Chinese Academy of Sciences（中国科学院大学）
Photoacoustic imaging (PAI) is an emerging non-invasive imaging modality combining the advantages of deep ultrasound penetration and high optical contrast. Image reconstruction is an essential topic in PAI, which is unfortunately an ill-posed problem due to the complex and unknown optical/acoustic parameters in tissue. Conventional algorithms used in PAI (e.g., delay-and-sum) provide a fast solution while many artifacts remain, especially for linear array probe with limited-view issue. Convolutional neural network (CNN) has shown state-of-the-art results in computer vision, and more and more w…
German Cancer Research Center (DKFZ)（德国癌症研究中心（DKFZ））；Heidelberg University（海德堡大学）；Heidelberg University Hospital（海德堡大学医院）
Purpose: Photoacoustic tomography (PAT) is a novel imaging technique that can spatially resolve both morphological and functional tissue properties, such as the vessel topology and tissue oxygenation. While this capacity makes PAT a promising modality for the diagnosis, treatment and follow-up of various diseases, a current drawback is the limited field-of-view (FoV) provided by the conventionally applied 2D probes. Methods: In this paper, we present a novel approach to 3D reconstruction of PAT data (Tattoo tomography) that does not require an external tracking system and can smoothly be integ…
ShanghaiTech University（上海科技大学）；University of Chinese Academy of Sciences（中国科学院大学）
Photoacoustic imaging (PAI) is a non-invasive imaging modality that detects the ultrasound signal generated from tissue with light excitation. Photoacoustic computed tomography (PACT) uses unfocused large-area light to illuminate the target with ultrasound transducer array for PA signal detection. Limited-view issue could cause a low-quality image in PACT due to the limitation of geometric condition. The model-based method is used to resolve this problem, which contains different regularization. To adapt fast and high-quality reconstruction of limited-view PA data, in this paper, a model-based…
George Mason University（乔治梅森大学）；The MITRE Corporation（MITRE公司）
Photoacoustic tomography (PAT) is a nonionizing imaging modality capable of acquiring high contrast and resolution images of optical absorption at depths greater than traditional optical imaging techniques. Practical considerations with instrumentation and geometry limit the number of available acoustic sensors and their view of the imaging target, which result in significant image reconstruction artifacts degrading image quality. Iterative reconstruction methods can be used to reduce artifacts but are computationally expensive. In this work, we propose a novel deep learning approach termed pi…
In photoacoustic tomography (PAT) with flat sensor, we routinely encounter two types of limited data. The first is due to using a finite sensor and is especially perceptible if the region of interest is large relative to the sensor or located farther away from the sensor. In this paper, we focus on the second type caused by a varying sensitivity of the sensor to the incoming wavefront direction which can be modelled as binary i.e. by a cone of sensitivity. Such visibility conditions result, in the Fourier domain, in a restriction of both the image and the data to a bow-tie, akin to the one cor…
University of Oulu（奥卢大学）；University College London（伦敦大学学院）
Biomedical photoacoustic tomography, which can provide high resolution 3D soft tissue images based on the optical absorption, has advanced to the stage at which translation from the laboratory to clinical settings is becoming possible. The need for rapid image formation and the practical restrictions on data acquisition that arise from the constraints of a clinical workflow are presenting new image reconstruction challenges. There are many classical approaches to image reconstruction, but ameliorating the effects of incomplete or imperfect data through the incorporation of accurate priors is c…
Conventional photoacoustic imaging may suffer from the limited view and bandwidth of ultrasound transducers. A deep learning approach is proposed to handle these problems and is demonstrated both in simulations and in experiments on a multi-scale model of leaf skeleton. We employed an experimental approach to build the training and the test sets using photographs of the samples as ground truth images. Reconstructions produced by the neural network show a greatly improved image quality as compared to conventional approaches. In addition, this work aimed at quantifying the reliability of the neu…
Photoacoustic imaging has shown great potential for guiding minimally invasive procedures by accurate identification of critical tissue targets and invasive medical devices (such as metallic needles). The use of light emitting diodes (LEDs) as the excitation light sources accelerates its clinical translation owing to its high affordability and portability. However, needle visibility in LED-based photoacoustic imaging is compromised primarily due to its low optical fluence. In this work, we propose a deep learning framework based on U-Net to improve the visibility of clinical metallic needles w…
ShanghaiTech University（上海科技大学）；University of Chinese Academy of Sciences（中国科学院大学）
Machine learning has been developed dramatically and witnessed a lot of applications in various fields over the past few years. This boom originated in 2009, when a new model emerged, that is, the deep artificial neural network, which began to surpass other established mature models on some important benchmarks. Later, it was widely used in academia and industry. Ranging from image analysis to natural language processing, it fully exerted its magic and now become the state-of-the-art machine learning models. Deep neural networks have great potential in medical imaging technology, medical data …
Idier et al. [IEEE Trans. Comput. Imaging 4(1), 2018] propose a method which achieves superresolution in the microscopy setting by leveraging random speckle illumination and knowledge about statistical second order moments for the illumination patterns and model noise. This is achieved without any assumptions on the sparsity of the imaged object. In this paper, we show that their technique can be extended to photoacoustic tomography. We propose a simple algorithm for doing the reconstruction which only requires a small number of linear algebra steps. It is therefore much faster than the iterat…
Delay-and-sum (DAS) algorithms are widely used for beamforming in linear array photoacoustic imaging systems and are characterized by fast execution. However, these algorithms suffer from various drawbacks like low resolution, low contrast, high sidelobe artifacts and lack of visual coherence. More recently, adaptive weighting was introduced to improve the reconstruction image quality. Unfortunately, the existing state-of-the-art adaptive beamforming algorithms are computationally expensive and do not consider the specific noise characteristics of the acquired ultrasonic signal. In this articl…
Revisiting the joint estimation of initial pressure and speed-of-sound distributions in photoacoustic computed tomography with consideration of canonical object constraints
Coordinate-based Speed of Sound Recovery for Aberration-Corrected Photoacoustic Computed Tomography
Northwestern University（西北大学）；California Institute of Technology（加州理工学院）；Tsinghua University（清华大学）；NSF-Simons AI Institute for the Sky (SkAI)（NSF-模拟斯通AI天空研究所（SkAI））
