Deep Convolutional Neural Networks (CNNs) have been successfully deployed on robots for 6-DoF object pose estimation through visual perception. However, obtaining labeled data on a scale required for the supervised training of CNNs is a difficult task - exacerbated if the object is novel and a 3D model is unavailable. To this end, this work presents an approach for rapidly generating real-world, pose-annotated RGB-D data for unknown objects. Our method not only circumvents the need for a prior 3D object model (textured or otherwise) but also bypasses complicated setups of fiducial markers, turntables, and sensors. With the help of a human user, we first source minimalistic labelings of an ordered set of arbitrarily chosen keypoints over a set of RGB-D videos. Then, by solving an optimization problem, we combine these labels under a world frame to recover a sparse, keypoint-based representation of the object. The sparse representation leads to the development of a dense model and the pose labels for each image frame in the set of scenes. We show that the sparse model can also be efficiently used for scaling to a large number of new scenes. We demonstrate the practicality of the generated labeled dataset by training a pipeline for 6-DoF object pose estimation and a pixel-wise segmentation network.
Centre for Mathematical Sciences（数学科学中心）；Lund University（隆德大学）
In this paper we present a fast minimal solver for absolute camera pose estimation from four known points that lie in a plane. We assume a perspective camera model with unknown focal length and unknown radial distortion. The radial distortion is modelled using the division model with one parameter. We show that the solutions to this problem can be found from a univariate six-degree polynomial. This results in a very fast and numerically stable solver.
Faculty of Electrical Engineering, Czech Technical University in Prague（捷克理工大学电气工程学院）；ETH Zurich（苏黎世联邦理工学院）；National Institute of Informatics（国立信息学研究所）；Czech Institute of Informatics, Robotics and Cybernetics, Czech Technical University in Prague（捷克理工大学捷克信息学、机器人与控制论研究所）
The internal geometry of most modern consumer cameras is not adequately described by the perspective projection. Almost all cameras exhibit some radial lens distortion and are equipped with an electronic rolling shutter that induces distortions when the camera moves during the image capture. When focal length has not been calibrated offline, the parameters that describe the radial and rolling shutter distortions are usually unknown. While for global shutter cameras, minimal solvers for the absolute camera pose and unknown focal length and radial distortion are available, solvers for the rollin…
Existing methods for 3D-aware image synthesis largely depend on the 3D pose distribution pre-estimated on the training set. An inaccurate estimation may mislead the model into learning faulty geometry. This work proposes PoF3D that frees generative radiance fields from the requirements of 3D pose priors. We first equip the generator with an efficient pose learner, which is able to infer a pose from a latent code, to approximate the underlying true pose distribution automatically. We then assign the discriminator a task to learn pose distribution under the supervision of the generator and to di…
EPFL（洛桑联邦理工学院）；Balgrist University Hospital（巴尔格里斯特大学医院）；University of Zurich（苏黎世大学）；The University of British Columbia（英属哥伦比亚大学）
In sports, such as alpine skiing, coaches would like to know the speed and various biomechanical variables of their athletes and competitors. Existing methods use either body-worn sensors, which are cumbersome to setup, or manual image annotation, which is time consuming. We propose a method for estimating an athlete's global 3D position and articulated pose using multiple cameras. By contrast to classical markerless motion capture solutions, we allow cameras to rotate freely so that large capture volumes can be covered. In a first step, tight crops around the skier are predicted and fed to a …
A Minimal Solver for Relative Pose Estimation with Unknown Focal Length from Two Affine Correspondences
School of Aerospace Science and Engineering, National University of Defense Technology（航天科学与工程学院，国防科技大学）；Hunan Provincial Key Laboratory of Image Measurement and Vision Navigation（图像测量与视觉导航省级重点实验室）；Global Navigation Satellite System Research Center（全球导航卫星系统研究中心）；School of Geodesy and Geomatics, Wuhan University（测绘学院，武汉大学）；School of Remote Sensing Information Engineering, Wuhan University（遥感信息工程学院，武汉大学）；School of Software, Henan University（软件学院，河南大学）
We present a framework for learning single-view shape and pose prediction without using direct supervision for either. Our approach allows leveraging multi-view observations from unknown poses as supervisory signal during training. Our proposed training setup enforces geometric consistency between the independently predicted shape and pose from two views of the same instance. We consequently learn to predict shape in an emergent canonical (view-agnostic) frame along with a corresponding pose predictor. We show empirical and qualitative results using the ShapeNet dataset and observe encouraging…
RePoseD: Efficient Relative Pose Estimation With Known Depth Information
Czech Technical University in Prague（布拉格捷克技术大学）；Comenius University in Bratislava（布拉迪斯拉发夸美纽斯大学）；Nankai University（南开大学）；Czech Institute of Informatics, Robotics and Cybernetics（捷克信息学、机器人学与控制论研究所）
Beijing A&E Technologies（北京A&E科技公司）；Universitat Pompeu Fabra（庞培法布拉大学）；ICREA（加泰罗尼亚高等研究院）；University of California, Irvine（加州大学欧文分校）；Experian Data Lab（益博睿数据实验室）
We study the problem of multi-person pose estimation in natural images. A pose estimate describes the spatial position and identity (head, foot, knee, etc.) of every non-occluded body part of a person. Pose estimation is difficult due to issues such as deformation and variation in body configurations and occlusion of parts, while multi-person settings add complications such as an unknown number of people, with unknown appearance and possible interactions in their poses and part locations. We give a novel integer program formulation of the multi-person pose estimation problem, in which variable…
Robust 6-DoF Object Pose Tracking with Built-In Recovery under Occlusions and Rapid Object Motions
Woven by Toyota, Inc.（丰田编织公司）；University of Bonn（波恩大学）；University of Bonn, Center for Robotics, and the Lamarr Institute for Machine Learning and Artificial Intelligence（波恩大学机器人中心以及拉玛尔机器学习与人工智能研究所）
In this paper, we address the problem of using visuo-tactile feedback for 6-DoF localization and 3D reconstruction of unknown in-hand objects. We propose FingerSLAM, a closed-loop factor graph-based pose estimator that combines local tactile sensing at finger-tip and global vision sensing from a wrist-mount camera. FingerSLAM is constructed with two constituent pose estimators: a multi-pass refined tactile-based pose estimator that captures movements from detailed local textures, and a single-pass vision-based pose estimator that predicts from a global view of the object. We also design a loop…
We present gP4Pc, a new method for computing the absolute pose of a generalized camera with unknown internal scale from four corresponding 3D point-and-ray pairs. Unlike most pose-and-scale methods, gP4Pc is based on constraints arising from the congruence of shapes defined by two sets of four points related by an unknown similarity transformation. By choosing a novel parametrization for the problem, we derive a system of four quadratic equations in four scalar variables. The variables represent the distances of 3D points along the rays from the camera centers. After solving this system via Gr…
COFFEE: A Shadow-Resilient Real-Time Pose Estimator for Unknown Tumbling Asteroids using Sparse Neural Networks
Department of Electronic and Electrical Engineering, EPFL（EPFL电子与电气工程系）；Division of Engineering and Applied Science, California Institute of Technology（加州理工学院工程与应用科学系）
A crucial step in single particle analysis (SPA) of cryogenic electron microscopy (Cryo-EM), 2D classification and alignment takes a collection of noisy particle images to infer orientations and group similar images together. Averaging these aligned and clustered noisy images produces a set of clean images, ready for further analysis such as 3D reconstruction. Fourier-Bessel steerable principal component analysis (FBsPCA) enables an efficient, adaptable, low-rank rotation operator. We extend the FBsPCA to additionally handle translations. In this extended FBsPCA representation, we use a probab…
University of Southern California（南加州大学）；Tencent America（腾讯美国）；Tencent Media Lab（腾讯媒体实验室）
An unsupervised point cloud object retrieval and pose estimation method, called PCRP, is proposed in this work. It is assumed that there exists a gallery point cloud set that contains point cloud objects with given pose orientation information. PCRP attempts to register the unknown point cloud object with those in the gallery set so as to achieve content-based object retrieval and pose estimation jointly, where the point cloud registration task is built upon an enhanced version of the unsupervised R-PointHop method. Experiments on the ModelNet40 dataset demonstrate the superior performance of …
We tackle the problem of getting a full 6-DOF pose estimation of a query image inside a given point cloud. This technical report re-evaluates the algorithms proposed by Y. Li et al. "Worldwide Pose Estimation using 3D Point Cloud". Our code computes poses from 3 or 4 points, with both known and unknown focal length. The results can easily be displayed and analyzed with Meshlab. We found both advantages and shortcomings of the methods proposed. Furthermore, additional priors and parameters for point selection, RANSAC and pose quality estimate (inlier test) are proposed and applied.
Scene context is a powerful constraint on the geometry of objects within the scene in cases, such as surveillance, where the camera geometry is unknown and image quality may be poor. In this paper, we describe a method for estimating the pose of cars in a scene jointly with the ground plane that supports them. We formulate this as a joint optimization that accounts for varying car shape using a statistical atlas, and which simultaneously computes geometry and internal camera parameters. We demonstrate that this method produces significant improvements for car pose estimation, and we show that …
Perceiving 3D information is of paramount importance in many applications of computer vision. Recent advances in monocular depth estimation have shown that gaining such knowledge from a single camera input is possible by training deep neural networks to predict inverse depth and pose, without the necessity of ground truth data. The majority of such approaches, however, require camera parameters to be fed explicitly during training. As a result, image sequences from wild cannot be used during training. While there exist methods which also predict camera intrinsics, their performance is not on p…
Simon Fraser University（西蒙菲莎大学）；University of Regina（里贾纳大学）
We present a generalized grasping algorithm that uses point clouds (i.e. a group of points and their respective surface normals) to discover grasp pose solutions for multiple grasp types, executed by a mechanical gripper, in near real-time. The algorithm introduces two ideas: 1) a histogram of finger contact normals is used to represent a grasp 'shape' to guide a gripper orientation search in a histogram of object(s) surface normals, and 2) voxel grid representations of gripper and object(s) are cross-correlated to match finger contact points, i.e. grasp 'size', to discover a grasp pose. Const…
We present a near real-time method for 6-DoF tracking of an unknown object from a monocular RGBD video sequence, while simultaneously performing neural 3D reconstruction of the object. Our method works for arbitrary rigid objects, even when visual texture is largely absent. The object is assumed to be segmented in the first frame only. No additional information is required, and no assumption is made about the interaction agent. Key to our method is a Neural Object Field that is learned concurrently with a pose graph optimization process in order to robustly accumulate information into a consis…
We present a direct method to calculate a 6DoF pose change of a monocular camera for mobile navigation. The calculated pose is estimated up to a constant unknown scale parameter that is kept constant over the entire reconstruction process. This method allows a direct cal- culation of the metric position and rotation without any necessity to fuse the information in a probabilistic approach over longer frame sequence as it is the case in most currently used VSLAM approaches. The algorithm provides two novel aspects to the field of monocular navigation. It allows a direct pose estimation without …
University of Bonn（波恩大学）；University of Adelaide（阿德莱德大学）
In this work, we introduce the challenging problem of joint multi-person pose estimation and tracking of an unknown number of persons in unconstrained videos. Existing methods for multi-person pose estimation in images cannot be applied directly to this problem, since it also requires to solve the problem of person association over time in addition to the pose estimation for each person. We therefore propose a novel method that jointly models multi-person pose estimation and tracking in a single formulation. To this end, we represent body joint detections in a video by a spatio-temporal graph …
Shanghai Jiao Tong University（上海交通大学）；UC San Diego（加州大学圣地亚哥分校）
We propose to personalize a human pose estimator given a set of test images of a person without using any manual annotations. While there is a significant advancement in human pose estimation, it is still very challenging for a model to generalize to different unknown environments and unseen persons. Instead of using a fixed model for every test case, we adapt our pose estimator during test time to exploit person-specific information. We first train our model on diverse data with both a supervised and a self-supervised pose estimation objectives jointly. We use a Transformer model to build a t…
State-of-the-art approaches for 6D object pose estimation require large amounts of labeled data to train the deep networks. However, the acquisition of 6D object pose annotations is tedious and labor-intensive in large quantity. To alleviate this problem, we propose a weakly supervised 6D object pose estimation approach based on 2D keypoint detection. Our method trains only on image pairs with known relative transformations between their viewpoints. Specifically, we assign a set of arbitrarily chosen 3D keypoints to represent each unknown target 3D object and learn a network to detect their 2D…
The problem of identifying the 3D pose of a known object from a given 2D image has important applications in Computer Vision. Our proposed method of registering a 3D model of a known object on a given 2D photo of the object has numerous advantages over existing methods. It does not require prior training, knowledge of the camera parameters, explicit point correspondences or matching features between the image and model. Unlike techniques that estimate a partial 3D pose (as in an overhead view of traffic or machine parts on a conveyor belt), our method estimates the complete 3D pose of the obje…
University of Electronic Science and Technology of China（电子科技大学）；Vision Semantics Limited（视觉语义有限公司）
Existing human pose estimation approaches often only consider how to improve the model generalisation performance, but putting aside the significant efficiency problem. This leads to the development of heavy models with poor scalability and cost-effectiveness in practical use. In this work, we investigate the under-studied but practically critical pose model efficiency problem. To this end, we present a new Fast Pose Distillation (FPD) model learning strategy. Specifically, the FPD trains a lightweight pose neural network architecture capable of executing rapidly with low computational cost. I…
Centrale Supelec（巴黎中央高等电力学院）；University of British Columbia（不列颠哥伦比亚大学）
Recent advances in variational autoencoders (VAEs) have enabled learning latent manifolds as compact Lie groups, such as $SO(d)$. Since this approach assumes that data lies on a subspace that is homeomorphic to the Lie group itself, we here investigate how this assumption holds in the context of images that are generated by projecting a $d$-dimensional volume with unknown pose in $SO(d)$. Upon examining different theoretical candidates for the group and image space, we show that the attempt to define a group action on the data space generally fails, as it requires more specific geometric const…
College of Aerospace Science and Engineering, National University of Defense Technology（国防科技大学航天科学与工程学院）
The point correspondence (PC) and affine correspondence (AC) are widely used for relative pose estimation. An AC consists of a PC across two views and an affine transformation between the small patches around this PC. Previous work demonstrates that one AC generally provides three independent constraints for relative pose estimation. For multi-camera systems, there is still not any AC-based minimal solver for general relative pose estimation. To deal with this problem, we propose a complete solution to relative pose estimation from two ACs for multi-camera systems, consisting of a series of mi…
Northeastern University（东北大学）；College of William & Mary（威廉与玛丽学院）
The rapid development of autonomous driving, abnormal behavior detection, and behavior recognition makes an increasing demand for multi-person pose estimation-based applications, especially on mobile platforms. However, to achieve high accuracy, state-of-the-art methods tend to have a large model size and complex post-processing algorithm, which costs intense computation and long end-to-end latency. To solve this problem, we propose an architecture optimization and weight pruning framework to accelerate inference of multi-person pose estimation on mobile devices. With our optimization framewor…
In this work, we bridge the gap between recent pose estimation and tracking work to develop a powerful method for robots to track objects in their surroundings. Motion-Nets use a segmentation model to segment the scene, and separate translation and rotation models to identify the relative 6D motion of an object between two consecutive frames. We train our method with generated data of floating objects, and then test on several prediction tasks, including one with a real PR2 robot, and a toy control task with a simulated PR2 robot never seen during training. Motion-Nets are able to track the po…
DreamSat-Pose: Spacecraft Pose Estimation from Single-View 3D Reconstructions and Learned 2D-3D Feature Matching
Wellesley College（韦尔斯利学院）；Massachusetts Institute of Technology（麻省理工学院）；Politecnico di Milano（米兰理工大学）；University of Illinois Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）；Universidad Politécnica de Madrid（马德里理工大学）
Circular markers are planar markers which offer great performances for detection and pose estimation. For an uncalibrated camera with an unknown focal length, at least the images of at least two coplanar circles are generally required to recover their poses. Unfortunately, detecting more than one ellipse in the image must be tricky and time-consuming, especially regarding concentric circles. On the other hand, when the camera is calibrated, one circle suffices but the solution is twofold and can hardly be disambiguated. Our contribution is to put beyond this limit by dealing with the uncalibra…
The problem of identifying the 3D pose of a known object from a given 2D image has important applications in Computer Vision ranging from robotic vision to image analysis. Our proposed method of registering a 3D model of a known object on a given 2D photo of the object has numerous advantages over existing methods: It does neither require prior training nor learning, nor knowledge of the camera parameters, nor explicit point correspondences or matching features between image and model. Unlike techniques that estimate a partial 3D pose (as in an overhead view of traffic or machine parts on a co…
Recovering 3D human pose from 2D joints is still a challenging problem, especially without any 3D annotation, video information, or multi-view information. In this paper, we present an unsupervised GAN-based model consisting of multiple weight-sharing generators to estimate a 3D human pose from a single image without 3D annotations. In our model, we introduce single-view-multi-angle consistency (SVMAC) to significantly improve the estimation performance. With 2D joint locations as input, our model estimates a 3D pose and a camera simultaneously. During training, the estimated 3D pose is rotate…
IntrinsicAnything: Learning Diffusion Priors for Inverse Rendering Under Unknown Illumination
State Key Lab of CAD&CG, Zhejiang University（浙江大学CAD&CG国家重点实验室）；The University of Hong Kong（香港大学）；Tao Technology Department, Alibaba Group（阿里巴巴集团淘宝技术部）
Department of Radiology, Massachusetts General Hospital（麻省总医院放射科）；Radiology, Perelman School of Medicine, University of Pennsylvania（宾夕法尼亚大学佩雷尔曼医学院放射科）
In fetal-brain MRI, head-pose changes between prescription and acquisition present a challenge to obtaining the standard sagittal, coronal and axial views essential to clinical assessment. As motion limits acquisitions to thick slices that preclude retrospective resampling, technologists repeat ~55-second stack-of-slices scans (HASTE) with incrementally reoriented field of view numerous times, deducing the head pose from previous stacks. To address this inefficient workflow, we propose a robust head-pose detection algorithm using full-uterus scout scans (EPI) which take ~5 seconds to acquire. …
University of Pennsylvania（宾夕法尼亚大学）；Ryerson University（瑞尔森大学）
This paper addresses the challenge of 3D full-body human pose estimation from a monocular image sequence. Here, two cases are considered: (i) the image locations of the human joints are provided and (ii) the image locations of joints are unknown. In the former case, a novel approach is introduced that integrates a sparsity-driven 3D geometric prior and temporal smoothness. In the latter case, the former case is extended by treating the image locations of the joints as latent variables. A deep fully convolutional network is trained to predict the uncertainty maps of the 2D joint locations. The …
LIGM（LIGM实验室）；Ecole des Ponts（巴黎路桥学院）；Univ Gustave Eiffel（古斯塔夫·埃菲尔大学）；CNRS（法国国家科学研究中心）
Next Best View computation (NBV) is a long-standing problem in robotics, and consists in identifying the next most informative sensor position(s) for reconstructing a 3D object or scene efficiently and accurately. Like most current methods, we consider NBV prediction from a depth sensor like Lidar systems. Learning-based methods relying on a volumetric representation of the scene are suitable for path planning, but have lower accuracy than methods using a surface-based representation. However, the latter do not scale well with the size of the scene and constrain the camera to a small number of…
PoseMoE: Mixture-of-Experts Network for Monocular 3D Human Pose Estimation
State Key Laboratory of General Artificial Intelligence, Peking University, Shenzhen Graduate School（国家通用人工智能重点实验室，北京大学深圳研究生院）；College of Computing and Data Science, Nanyang Technological University（计算与数据科学学院，南洋理工大学）；Department of Computer Science and Engineering, University at Buffalo, State University of New York（计算机科学与工程系，布法罗大学，纽约州立大学）
Trinity College Dublin（都柏林圣三一学院）；Maynooth University（梅努斯大学）
Understanding hand-object pose with computer vision opens the door to new applications in mixed reality, assisted living or human-robot interaction. Most methods are trained and evaluated on balanced datasets. This is of limited use in real-world applications; how do these methods perform in the wild on unknown objects? We propose a novel benchmark for object group distribution shifts in hand and object pose regression. We then test the hypothesis that meta-learning a baseline pose regression neural network can adapt to these shifts and generalize better to unknown objects. Our results show me…
Boston University（波士顿大学）；Google Research（谷歌研究院）；University of Toronto（多伦多大学）；MIT-IBM Watson AI Lab（MIT-IBM沃森人工智能实验室）
In the era of deep learning, human pose estimation from multiple cameras with unknown calibration has received little attention to date. We show how to train a neural model to perform this task with high precision and minimal latency overhead. The proposed model takes into account joint location uncertainty due to occlusion from multiple views, and requires only 2D keypoint data for training. Our method outperforms both classical bundle adjustment and weakly-supervised monocular 3D baselines on the well-established Human3.6M dataset, as well as the more challenging in-the-wild Ski-Pose PTZ dat…
