Where am I? SLAM for Mobile Machines on A Smart Working Site
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；Peking University（北京大学）；University of Birmingham（伯明翰大学）；Robert Bosch GmbH（罗伯特·博世有限公司）；University of California, Berkeley（加州大学伯克利分校）
Yusheng Xiang, Dianzhao Li, Tianqing Su, Quan Zhou, Christine Brach, Samuel S. Mao, Marcus Geimer
The current optimization approaches of construction machinery are mainly based on internal sensors. However, the decision of a reasonable strategy is not only determined by its intrinsic signals, but also very strongly by environmental information, especially the terrain. Due to the dynamically changing of the construction site and the consequent absence of a high definition map, the Simultaneous Localization and Mapping (SLAM) offering the terrain information for construction machines is still challenging. Current SLAM technologies proposed for mobile machines are strongly dependent on costly or computationally expensive sensors, such as RTK GPS and cameras, so that commercial use is rare. In this study, we proposed an affordable SLAM method to create a multi-layer gird map for the construction site so that the machine can have the environmental information and be optimized accordingly. Concretely, after the machine passes by, we can get the local information and record it. Combining with positioning technology, we then create a map of the interesting places of the construction site. As a result of our research gathered from Gazebo, we showed that a suitable layout is the combination of 1 IMU and 2 differential GPS antennas using the unscented Kalman filter, which keeps the average distance error lower than 2m and the mapping error lower than 1.3% in the harsh environment. As an outlook, our SLAM technology provides the cornerstone to activate many efficiency improvement approaches.
Singtel Cognitive and AI Lab for Enterprises（新电信企业认知与人工智能实验室）；Nanyang Technological University（南洋理工大学）；The Chinese University of Hong Kong（香港中文大学）
Indoor self-localization is a highly demanded system function for smartphones. The current solutions based on inertial, radio frequency, and geomagnetic sensing may have degraded performance when their limiting factors take effect. In this paper, we present a new indoor simultaneous localization and mapping (SLAM) system that utilizes the smartphone's built-in audio hardware and inertial measurement unit (IMU). Our system uses a smartphone's loudspeaker to emit near-inaudible chirps and then the microphone to record the acoustic echoes from the indoor environment. Our profiling measurements sh…
Zhejiang University of Technology（浙江工业大学）；Tianjin University of Technology（天津理工大学）
The efficiency and accuracy of mapping are crucial in a large scene and long-term AR applications. Multi-agent cooperative SLAM is the precondition of multi-user AR interaction. The cooperation of multiple smart phones has the potential to improve efficiency and robustness of task completion and can complete tasks that a single agent cannot do. However, it depends on robust communication, efficient location detection, robust mapping, and efficient information sharing among agents. We propose a multi-intelligence collaborative monocular visual-inertial SLAM deployed on multiple ios mobile devic…
Commonly, SLAM algorithms are focused on a static environment, however, there are several scenes where dynamic objects are present. This work presents the STDyn-SLAM an image feature-based SLAM system working on dynamic environments using a series of sub-systems, like optic flow, orb features extraction, visual odometry, and convolutional neural networks to discern moving objects in the scene. The neural network is used to support object detection and segmentation to avoid erroneous maps and wrong system localization. The STDyn-SLAM employs a stereo pair and is developed for outdoor environmen…
Zhejiang University（浙江大学）；Zhejiang University of Science & Technology（浙江科技学院）
This paper presents a 3D lidar SLAM system based on improved regionalized Gaussian process (GP) map reconstruction to provide both low-drift state estimation and mapping in real-time for robotics applications. We utilize spatial GP regression to model the environment. This tool enables us to recover surfaces including those in sparsely scanned areas and obtain uniform samples with uncertainty. Those properties facilitate robust data association and map updating in our scan-to-map registration scheme, especially when working with sparse range data. Compared with previous GP-SLAM, this work over…
Real-time six degree-of-freedom pose estimation with ground vehicles represents a relevant and well studied topic in robotics, due to its many applications, such as autonomous driving and 3D mapping. Although some systems exist already, they are either not accurate or they struggle in real-time setting. In this paper, we propose a fast, accurate and modular LiDAR SLAM system for both batch and online estimation. We first apply downsampling and outlier removal, to filter out noise and reduce the size of the input point clouds. Filtered clouds are then used for pose tracking and floor detection,…
Skolkovo Institute of Science and Technology（斯科尔科沃科技学院）
Existing visual SLAM approaches are sensitive to illumination, with their precision drastically falling in dark conditions due to feature extractor limitations. The algorithms currently used to overcome this issue are not able to provide reliable results due to poor performance and noisiness, and the localization quality in dark conditions is still insufficient for practical use. In this paper, we present a novel SLAM method capable of working in low light using Generative Adversarial Network (GAN) preprocessing module to enhance the light conditions on input images, thus improving the localiz…
We introduce LIDAUS Localization of IoT Device via Anchor UAV SLAM), an infrastructure-free, multi-stage SLAM system that utilizes an Unmanned Aerial Vehicle (UAV) to accurately localize IoT devices in a 3D indoor space where GPS signals are unavailable or weak, e.g., manufacturing factories, disaster sites, or smart buildings. The lack of GPS signals and infrastructure support makes most of the existing indoor localization systems not practical when localizing a large number of wireless IoT devices. In addition, safety concerns, access restriction, and simply the huge amount of IoT devices ma…
In this paper we present the first published end-to-end production computer-vision system for powering city-scale shared augmented reality experiences on mobile devices. In doing so we propose a new formulation for an experience-based mapping framework as an effective solution to the key issues of city-scale SLAM scalability, robustness, map updates and all-time all-weather performance required by a production system. Furthermore, we propose an effective way of synchronising SLAM systems to deliver seamless real-time localisation of multiple edge devices at the same time. All this in the prese…
Instituto Balseiro（巴尔塞iro学院）；CNEA（国家原子能委员会）；SLAMCore ltd.（SLAMCore有限公司）
Vision-based Simultaneous Localization And Mapping (VSLAM) is a mature problem in Robotics. Most VSLAM systems are feature based methods, which are robust and present high accuracy, but yield sparse maps with limited application for further navigation tasks. Most recently, direct methods which operate directly on image intensity have been introduced, capable of reconstructing richer maps at the cost of higher processing power. In this work, an edge-based monocular SLAM system (SE-SLAM) is proposed as a middle point: edges present good localization as point features, while enabling a structural…
The fusion of camera sensor and inertial data is a leading method for ego-motion tracking in autonomous and smart devices. State estimation techniques that rely on non-linear filtering are a strong paradigm for solving the associated information fusion task. The de facto inference method in this space is the celebrated extended Kalman filter (EKF), which relies on first-order linearizations of both the dynamical and measurement model. This paper takes a critical look at the practical implications and limitations posed by the EKF, especially under faulty visual feature associations and the pres…
The Hong Kong Polytechnic University (PolyU)（香港理工大学）；Hong Kong University of Science and Technology（香港科技大学）
Accurate localization and 3D maps are increasingly needed for various artificial intelligence based IoT applications such as augmented reality, intelligent transportation, crowd monitoring, robotics, etc. This article proposes a novel semantic 3D map change detection and update based on a smartphone visual positioning system (VPS) for the outdoor and indoor environments. The proposed method presents an alternate solution to SLAM for map update in terms of efficiency, cost, availability, and map reuse. Building on existing 3D maps of recent years, a system is designed to use artificial intellig…
Accurate mapping and localization are very important for many industrial robotics applications. In this paper, we propose an improved Signed Distance Function (SDF) for both 2D SLAM and pure localization to improve the accuracy of mapping and localization. To achieve this goal, firstly we improved the back-end mapping to build a more accurate SDF map by extending the update range and building free space, etc. Secondly, to get more accurate pose estimation for the front-end, we proposed a new iterative registration method to align the current scan to the SDF submap by removing random outliers o…
Swedish Maritime Robotics Centre (SMaRC)（瑞典海洋机器人中心（SMaRC））；KTH Royal Institute of Technology（瑞典皇家理工学院）
Registration methods for point clouds have become a key component of many SLAM systems on autonomous vehicles. However, an accurate estimate of the uncertainty of such registration is a key requirement to a consistent fusion of this kind of measurements in a SLAM filter. This estimate, which is normally given as a covariance in the transformation computed between point cloud reference frames, has been modelled following different approaches, among which the most accurate is considered to be the Monte Carlo method. However, a Monte Carlo approximation is cumbersome to use inside a time-critical…
Singapore University of Technology and Design（新加坡科技设计大学）；Nanyang Technological University（南洋理工大学）；University of Moratuwa（莫拉图瓦大学）
Simultaneous localization and mapping (SLAM) has been richly researched in past years particularly with regard to range-based or visual-based sensors. Instead of deploying dedicated devices that use visual features, it is more pragmatic to exploit the radio features to achieve this task, due to their ubiquitous nature and the wide deployment of Wifi wireless network. In this paper, we present a novel approach for crowd-sensing simultaneous localization and radio fingerprint mapping (C-SLAM-RF) in large unknown indoor environments. The proposed system makes use of the received signal strength (…
Singapore University of Technology and Design（新加坡科技设计大学）；Southwest University of Science and Technology（西南科技大学）；University of Moratuwa（莫拉图瓦大学）；Nanyang Technological University（南洋理工大学）
Simultaneous localization and mapping (SLAM) has been extensively researched in past years particularly with regard to range-based or visual-based sensors. Instead of deploying dedicated devices that use visual features, it is more pragmatic to exploit the radio features to achieve this task, due to their ubiquitous nature and the widespread deployment of Wi-Fi wireless network. This paper presents a novel approach for collaborative simultaneous localization and radio fingerprint mapping (C-SLAM-RF) in large unknown indoor environments. The proposed system uses received signal strengths (RSS) …
In this paper, we propose a modular navigation system that can be mounted on a regular powered wheelchair to assist disabled children and the elderly with autonomous mobility and shared-control features. The lack of independent mobility drastically affects an individual's mental and physical health making them feel less self-reliant, especially children with Cerebral Palsy and limited cognitive skills. To address this problem, we propose a comparatively inexpensive and modular system that uses a stereo camera to perform tasks such as path planning, obstacle avoidance, and collision detection i…
School of Computer Science and Engineering, Sun Yat-sen University（中山大学计算机科学与工程学院）
With the wide penetration of smart robots in multifarious fields, Simultaneous Localization and Mapping (SLAM) technique in robotics has attracted growing attention in the community. Yet collaborating SLAM over multiple robots still remains challenging due to performance contradiction between the intensive graphics computation of SLAM and the limited computing capability of robots. While traditional solutions resort to the powerful cloud servers acting as an external computation provider, we show by real-world measurements that the significant communication overhead in data offloading prevents…
In the absence of external reference position information (e.g. GNSS) SLAM has proven to be an effective method for indoor navigation. The positioning drift can be reduced with regular loop-closures and global relaxation as the backend, thus achieving a good balance between exploration and exploitation. Although vision-based systems like laser scanners are typically deployed for SLAM, these sensors are heavy, energy inefficient, and expensive, making them unattractive for wearables or smartphone applications. However, the concept of SLAM can be extended to non-optical systems such as magnetome…
ETH Zurich（苏黎世联邦理工学院）；Voliro Airborne Robotics（Voliro空中机器人公司）
With the advent of powerful, light-weight 3D LiDARs, they have become the hearth of many navigation and SLAM algorithms on various autonomous systems. Pointcloud registration methods working with unstructured pointclouds such as ICP are often computationally expensive or require a good initial guess. Furthermore, 3D feature-based registration methods have never quite reached the robustness of 2D methods in visual SLAM. With the continuously increasing resolution of LiDAR range images, these 2D methods not only become applicable but should exploit the illumination-independent modalities that co…
This paper presents the development of a Simultaneous Localization and Mapping (SLAM) based Autonomous Navigation system. The motivation for this study was to find a solution for navigating interior spaces autonomously. Interior navigation is challenging as it can be forever evolving. Solving this issue is necessary for multitude of services, like cleaning, the health industry, and in manufacturing industries. The focus of this paper is the description of the SLAM-based software architecture developed for this proposed autonomous system. A potential application of this system, oriented to a sm…
Huazhong University of Science and Technology（华中科技大学）；Southeast University（东南大学）
Recent years have witnessed the rapid proliferation of low-power backscatter technologies that realize the ubiquitous and long-term connectivity to empower smart cities and smart homes. Localizing such low-power backscatter tags is crucial for IoT-based smart services. However, current backscatter localization systems require prior knowledge of the site, either a map or landmarks with known positions, increasing the deployment cost. To empower universal localization service, this paper presents Rover, an indoor localization system that simultaneously localizes multiple backscatter tags with ze…
This paper reports a case study on the User Experience (UX)of an industrial robotic prototype in the context of human-robot cooperation in an automotive assembly line. The goal was to find out what kinds of suggestions the assembly line workers, who actually use the new robotic system, propose in order to improve the human-robot interaction (HRI). The operators working with the robotic prototype were interviewed three weeks after the deployment using established UX narrative interview guidelines. Our results show that the cooperation with a robot that executes predefined working steps actually…
The final project report for the SmartShuttle sub-project of the Ohio State University is presented in this report. This has been a two year project where the unified, scalable and replicable automated driving architecture introduced by the Automated Driving Lab of the Ohio State University has been further developed, replicated in different vehicles and scaled between different vehicle sizes. A limited scale demonstration was also conducted during the first year of the project. The architecture used was further developed in the second project year including parameter space based low level con…
Bielefeld University of Applied Sciences（比勒费尔德应用科学大学）；Otto-von-Guericke University Magdeburg（马格德堡奥托·冯·格里克大学）
Virtual borders are employed to allow humans the interactive and flexible restriction of their mobile robots' workspaces in human-centered environments, e.g. to exclude privacy zones from the workspace or to indicate certain areas for working. They have been successfully specified in interaction processes using methods from human-robot interaction. However, these methods often lack an expressive feedback system, are restricted to robot's on-board interaction capabilities and require a direct line of sight between human and robot. This negatively affects the user experience and interaction time…
Aristotle University of Thessaloniki（塞萨洛尼基亚里士多德大学）
A map merging component is crucial for the proper functionality of a multi-robot system performing exploration, since it provides the means to integrate and distribute the most important information carried by the agents: the explored-covered space and its exact (depending on the SLAM accuracy) morphology. Map merging is a prerequisite for an intelligent multi-robot team aiming to deploy a smart exploration technique. In the current work, a metric map merging approach based on environmental information is proposed, in conjunction with spatially scattered RFID tags localization. This approach i…
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；Karlsruhe University of Applied Sciences（卡尔斯鲁厄应用技术大学）
Adhering to current HRI paradigms, all of the sensors, visualisation and legibility of actions and motions are borne by the robot or its working cell. This necessarily makes robots more complex or confines them into specialised, structured environments. We propose leveraging the state of the art of wearable technologies, such as augmented reality head mounted displays, smart watches, sensor tags and radio-frequency ranging, to "adapt" the human and reduce the requirements and complexity of robots.
