A realistic performance assessment of any wireless technology requires the use of a channel model that reflects its main characteristics. The independent and identically distributed Rayleigh fading channel model has been (and still is) the basis of most theoretical research on multiple antenna technologies in scattering environments. This letter shows that such a model is not physically appearing when using a reconfigurable intelligent surface (RIS) with rectangular geometry and provides an alternative physically feasible Rayleigh fading model that can be used as a baseline when evaluating RIS-aided communications. The model is used to revisit the basic RIS properties, e.g., the rank of spatial correlation matrices and channel hardening.
Massive multiple-input multiple-output (MIMO) and reconfigurable intelligent surface (RIS) are two promising technologies for 5G-and-beyond wireless networks, capable of providing large array gain and multiuser spatial multiplexing. Without requiring additional frequency bands, those technologies offer significant improvements in both spectral and energy efficiency by simultaneously serving many users. The performance analysis of an RIS-assisted Massive MIMO system as a function of the channel statistics relies heavily on fundamental properties including favorable propagation, channel hardenin…
This paper presents a quantified assessment of the physical layer security capabilities of reconfigurable intelligent surface (RIS)-aided wireless systems under eavesdropping. Specifically, we derive a closed-form expression for the ergodic secrecy capacity (ESC) that is adaptable to different types of fading and RIS size. The channels between the transmitter (TX) and RIS, the RIS and legitimate receiver as well as the TX and eavesdropper are assumed to follow independent mixture Gamma (MG) distributions. Note that MG is capable of modeling a large variety of well-known distributions, includin…
Leveraging on the reconfigurable intelligent surface (RIS) paradigm for enabling the next Internet of Things (IoT) and 6G era, this paper develops a comprehensive theoretical framework characterizing the performance of RIS-assisted communications in a plethora of propagation environments. We derive unified mathematical models for the outage probability and ergodic capacity of single and multiple-element RIS over Fox's H fading channel, which includes as special cases nearly all linear and non linear multi-path and shadowing fading models adopted in the open literature. For gleaning further ins…
Mobile phone operators have begun the roll-out of 5G networks, deploying massive MIMO base stations. Commercial product ranges start with 16 independent radio chains connected to a large-scale antenna system to exploit both channel hardening and favourable propagation in order to obtain increased spectral efficiency. In this work, the cumulative distribution function describing the gain for large-scale antenna systems considering spatial and spectral diversity is evaluated empirically in terms of a fading margin and compared to an analytical maximum diversity reference system. This allows for …
We consider a fading channel in which a multi-antenna transmitter communicates with a multi-antenna receiver through a reconfigurable intelligent surface (RIS) that is made of $N$ reconfigurable passive scatterers impaired by phase noise. The beamforming vector at the transmitter, the combining vector at the receiver, and the phase shifts of the $N$ scatterers are optimized in order to maximize the signal-to-noise-ratio (SNR) at the receiver. By assuming Rayleigh fading (or line-of-sight propagation) on the transmitter-RIS link and Rayleigh fading on the RIS-receiver link, we prove that the SN…
Extensive research has already started on 6G and beyond wireless technologies due to the envisioned new use-cases and potential new requirements for future wireless networks. Although a plethora of modern physical layer solutions have been introduced in the last few decades, it is undeniable that a level of saturation has been reached in terms of the available spectrum, adapted modulation/coding solutions and accordingly the maximum capacity. Within this context, communications through reconfigurable intelligent surfaces (RISs), which enable novel and effective functionalities including wave a…
In a multiple-input-multiple-output (MIMO) communication system, the multipath fading is averaged over radio links. This well-known channel hardening phenomenon plays a central role in the design of massive MIMO systems. The aim of this paper is to study channel hardening using a physical channel model in which the influences of propagation rays and antenna array topologies are highlighted. A measure of channel hardening is derived through the coefficient of variation of the channel gain. Our analyses and closed form results based on the used physical model are consistent with those of the lit…
In this work, we consider a single input single output (SISO) system for Reconfigurable Intelligent Surface (RIS) assisted mmWave communication. We consider Rician channel models over user node to RIS and RIS to Access Point (AP). We obtain closed form expressions for capacity with channel state information (CSI) and without CSI at the transmitter. Newly derived capacity expressions are closed form expressions in a very compact form. We also simplified the closed form expressions for average symbol error probability. We also characterize the impacts of key parameters Rician factor K and number…
Channel hardening characterises the diminishing influence of small scale fading on large scale antenna systems. The effective massive MIMO time domain channel is introduced and applied to a maximum diversity channel with rectangular power delay profile. This model bounds channel hardening and allows a proper interpretation from a radio design perspective. The reduced variability of the effective channel enables power inversion to obtain a downlink channel that only depends on the large scale fading properties.
A reconfigurable intelligent surface (RIS) is capable of manipulating electromagnetic waves with its flexibly configurable unit cells, thus is an appealing technology to resist fast fading caused by multi-path in wireless communications. In this paper, a two-path propagation model for RIS-assisted wireless communications is proposed by considering both the direct path from the transmitter to the receiver and the assisted path provided by the RIS. The proposed propagation model unveils that the phase shifts of RISs can be optimized by appropriate configuration for multi-path fading mitigation. …
Reconfigurable intelligent surfaces (RISs), which enable tunable anomalous reflection, have appeared as a promising method to enhance wireless systems. In this paper, we propose to use an RIS as a spatial equalizer to address the well-known multi-path fading phenomenon. By introducing some controllable paths artificially against the multi-path fading through the RIS, we can perform equalization during the transmission process instead of at the receiver, and thus all the users can share the same equalizer. Unlike the beamforming application of the RIS, which aims to maximize the received energy…
In this paper, we propose and investigate an aerial reconfigurable intelligent surface (aerial-RIS)-aided wireless communication system. Specifically, considering practical composite fading channels, we characterize the air-to-ground (A2G) links by Namkagami-m small-scale fading and inverse-Gamma large-scale shadowing. To investigate the delay-limited performance of the proposed system, we derive a tight approximate closed-form expression for the end-to-end outage probability (OP). Next, considering a mobile environment, where performance analysis is intractable, we rely on machine learning-ba…
In this paper, we consider the transmission of confidential messages over slow fading wireless channels in the presence of an eavesdropper. We propose a transmission scheme that employs a single reconfigurable antenna at each of the legitimate partners, whereas the eavesdropper uses a single conventional antenna. A reconfigurable antenna can switch its propagation characteristics over time and thus it perceives different fading channels. It is shown that without channel side information (CSI) at the legitimate partners, the main channel can be transformed into an ergodic regime offering a \tex…
One of the use cases for 5G systems and beyond is ultra-reliability low-latency communication (URLLC). An enabling technology for URLLC is massive multiple-input multiple-output (MIMO), which can increase reliability due to improved user separation, array gain and the channel hardening effect. Measurements have been performed in an operating factory environment at 3.7 GHz with a co-located massive MIMO array and a unique randomly distributed array. Channel hardening can appear when the number of antennas is increased such that the variations of channel gain (small-scale fading) is decreased an…
Recent research provides an approximation on the performance for reconfigurable intelligent surface (RIS) assisted systems over generalized fading channels with phase noise resulting from imperfect phase compensation at the RIS. In this paper, we developed exact analysis and upper bounds on the performance of RIS-assisted vehicular communication system considering phase noise with mobility over asymmetric fading channels by coherently combining received signals reflected by RIS elements and direct transmissions from the source terminal. We employ a novel approach to represent the PDF and CDF o…
We introduce a phase hopping scheme for reconfigurable intelligent surfaces (RISs) in which the phases of the individual RIS elements are randomly varied with each transmitted symbol. This effectively converts slow fading into fast fading. We show how this can be leveraged to significantly improve the outage performance especially for small outage probabilities without channel state information (CSI) at the transmitter and RIS. Furthermore, the same result can be accomplished even if only two possible phase values are available. Since we do not require perfect CSI at the transmitter or RIS, th…
This article considers the performance of wireless communication systems that utilize reconfigurable or pattern-dynamic antennas. The focus is on finite-state channels with memory and performance is assessed in terms of real-time behavior. In a wireless setting, when a slow fading channel enters a deep fade, the corresponding communication system faces the threat of successive decoding failures at the destination. Under such circumstances, rapidly getting out of deep fades becomes a priority. Recent advances in fast reconfigurable antennas provide new means to alter the statistical profile of …
This paper investigates two performance metrics, namely ergodic capacity and symbol error rate, of mmWave communication system assisted by a reconfigurable intelligent surface (RIS). We assume independent and identically distributed (i.i.d.) Rician fadings between user-RIS-Access Point (AP), with RIS surface consisting of passive reflecting elements. First, we derive a new unified closed-form formula for the average symbol error probability of generalised M-QAM/M-PSK signalling over this mmWave link. We then obtain new closed-form expressions for the ergodic capacity with and without channel s…
The revolution in the low Earth orbit (LEO) satellite networks will bring changes on their communication models and a shift from the classical bent-pipe architectures to more sophisticated networking platforms. Thanks to technological advancements in microelectronics and micro-systems, the terahertz (THz) band has emerged as a strong candidate for inter-satellite links (ISLs) due to its promise of high data rates. Yet, the propagation conditions of the THz band need to be properly modeled and controlled by utilizing reconfigurable intelligent surfaces (RISs) to leverage their full potential. I…
A study of channel hardening in a large-scale antenna system has been carried out by means of indoor channel measurements over four frequency bands, namely 1.472 GHz, 2.6 GHz, 3.82 GHz and 4.16 GHz. NTNU's Reconfigurable Radio Network Platform has been used to record the channel estimates for 40 single user non-line of sight radio links to a 64 element wide-band antenna array. By examining the rms delay spread and the ratio of the normalized subcarrier to average SISO link power of the radio channel received by a single user after combination, the hardening of this equivalent channel is analyz…
Meta-surfaces intend to improve significantly the performance of future wireless networks by controlling the wireless propagation and shaping the radio waves according to the generalized Snell's law. A recent application of meta-surfaces is reconfigurable intelligent surfaces which are practically limited by the requirement for perfect knowledge of the user's position. For the case where the user's position cannot be obtained, we introduce randomly reconfigurable surfaces (RRSs) aiming to diffuse the incoming wave. A RRS is defined as a reconfigurable meta-surface that each of its elements ind…
Reconfigurable Intelligent Surface (RIS) draws great attentions in academic and industry due to its passive and low power consumption nature, and has currently been used in physical layer security to enhance the secure transmission. However, due to the existence of double fading effect on the reflecting channel link between transmitter and user, RIS helps achieve limited secrecy performance gain compared with the case without RIS. In this correspondence, we propose a novel active RIS design to enhance the secure wireless transmission, where the reflecting elements in RIS not only adjust the ph…
Vehicle-to-everything (V2X) connectivity in 5G-and-beyond communication networks supports the futuristic intelligent transportation system (ITS) by allowing vehicles to intelligently connect with everything. The advent of reconfigurable intelligent surfaces (RISs) has led to realizing the true potential of V2X communication. In this work, we propose a dual RIS-based vehicle-to-infrastructure (V2I) communication scheme. Following that, the performance of the proposed communication scheme is evaluated in terms of deriving the closed-form expressions for outage probability, spectral efficiency an…
Reconfigurable intelligent surfaces (RISs) are an emerging technology for future wireless communication. The vast majority of recent research on RIS has focused on system level optimizations. However, developing straightforward and tractable electromagnetic models that are suitable for RIS aided communication modeling remains an open issue. In this paper, we address this issue and derive communication models by using rigorous scattering parameter network analysis. We also propose new RIS architectures based on group and fully connected reconfigurable impedance networks that can adjust not only…
We consider a two--tile reconfigurable intelligent surface (RIS) assisted wireless network with a two-antenna transmitter and receiver over Rayleigh fading. We show that the average received signal-to-noise-ratio (SNR) optimal transmission and combining vectors are given by the left and right singular spaces of the RIS-receiver and transmit-RIS channel matrices, respectively. Moreover, the optimal phases at the two tiles of the RIS are determined by the phases of the elements of the latter spaces. To further study the effect of phase compensation, we statistically characterize the average SNR …
In this letter, we investigate the performance of reconfigurable intelligent surface (RIS)-assisted communications, under the assumption of generalized Gaussian noise (GGN), over Rayleigh fading channels. Specifically, we consider an RIS, equipped with $N$ reflecting elements, and derive a novel closed-form expression for the symbol error rate (SER) of arbitrary modulation schemes. The usefulness of the derived new expression is that it can be used to capture the SER performance in the presence of special additive noise distributions such as Gamma, Laplacian, and Gaussian noise. These special …
Reconfigurable Intelligent Surface (RIS) can create favorable multipath to establish strong links that are useful in millimeter wave (mmWave) communications. While previous works used Rayleigh or Rician fading, we use the fluctuating two-ray (FTR) distribution to model the small-scale fading in mmWave frequency. First, we obtain the statistical characterizations of the product of independent FTR random variables (RVs) and the sum of product of FTR RVs. For the RIS-aided and amplify-and-forward (AF) relay systems, we derive exact end-to-end signal-to-noise ratio (SNR) expressions. To maximize t…
A communication link aided by a reconfigurable intelligent surface (RIS) is studied in which the transmitter can control the state of the RIS via a finite-rate control link. Channel state information (CSI) is acquired at the receiver based on pilot-assisted channel estimation, and it may or may not be shared with the transmitter. Considering quasi-static fading channels with imperfect CSI, capacity-achieving signalling is shown to implement joint encoding of the transmitted signal and of the response of the RIS. This demonstrates the information-theoretic optimality of RIS-based modulation, or…
Reconfigurable intelligent surface (RIS) is a promising technology to avoid signal blockage by creating virtual line-of-sight (LOS) connectivity for free-space optical (FSO) and radio frequency (RF) wireless systems. This paper considers a mixed FSO-RF system by employing multiple RISs in both the links for multihop transmissions to extend the communication range. We develop probability density function (PDF) and cumulative density function (CDF) of the signal-to-noise ratio (SNR) for the cascaded channels by considering double generalized gamma (dGG) turbulence with pointing errors for the FS…
In this paper, we analyze the error probability of reconfigurable intelligent surfaces (RIS)-enabled communication systems with quantized channel phase compensation over Rayleigh fading channels. The probability density and characteristic functions of the received signal amplitude are derive dand used to compute exact expressions for the bit error rate(BER). The resulting expressions are general, as they hold for an arbitrary number of reflecting elements N, and quantization levels, L. We introduce an exact asymptotic analysis in the high signal-to-noise ratio (SNR) regime, from which we demon…
Secrecy outage probability (SOP) and secrecy rate (SR) of the reconfigurable intelligent surface (RIS) assisted wireless networks under Rician fading are investigated in this paper. More precisely, we enhance the secrecy performance of the considered networks by suppressing the wiretap channel instead of maximizing the main channel. We propose a simple heuristic algorithm to find out the optimal phase-shift of each RIS's element. Simulation results based on the Monte-Carlo method are given to verify the superiority of the proposed optimal phase-shifts compared to the random phase-shifts design…
Intelligent reconfigurable surface (IRS) is being seen as a promising technology for 6G wireless networks. The IRS can reconfigure the wireless propagation environment, which results in significant performance improvement of wireless communications. In this paper, we analyze the performance of bandwidth-efficient quadrature amplitude modulation (QAM) techniques for IRS-assisted wireless communications over Rayleigh fading channels. New closed-form expressions of the generic average symbol error rate (ASER) for rectangular QAM, square QAM and cross QAM schemes are derived. Moreover, simplified …
Reconfigurable intelligent surfaces (RISs) have attracted great attention as a potential beyond 5G technology. These surfaces consist of many passive elements of metamaterials whose impedance can be controllable to change the phase, amplitude, or other characteristics of wireless signals impinging on them. Channel estimation is a critical task when it comes to the control of a large RIS when having a channel with a large number of multipath components. In this paper, we propose a novel channel estimation scheme that exploits spatial correlation characteristics at both the massive multiple-inpu…
In this paper, we study surface-based communication systems based on different levels of channel state information for system optimization. We analyze the system performance in terms of rate and degrees of freedom (DoF). We show that the deployment of a reconfigurable intelligent surface (RIS) results in increasing the number of DoF, by extending the near-field region. Over Rician fading channels, we show that an RIS can be efficiently optimized only based on the positions of the transmitting and receiving surfaces, while providing good performance if the Rician fading factor is not too small.
Programmable radio environments parametrized by reconfigurable intelligent surfaces (RISs) are emerging as a new wireless communications paradigm, but currently used channel models for the design and analysis of signal-processing algorithms cannot include fading in a manner that is faithful to the underlying wave physics. To overcome this roadblock, we introduce a physics-based end-to-end model of RIS-parametrized wireless channels with adjustable fading (coined PhysFad) which is based on a first-principles coupled-dipole formalism. PhysFad naturally incorporates the notions of space and causa…
In this paper, we propose a reconfigurable intelligent surface (RIS)-assisted frequency-modulated (FM) differential chaos shift keying (DCSK) scheme with simultaneous wireless information and power transfer (SWIPT), called RIS-FM-DCSK-SWIPT scheme, for low-power, low-cost, and high-reliability wireless communication networks. In particular, the proposed scheme is developed under a non-linear energy-harvesting (EH) model which can accurately characterize the practical situation. The proposed RIS-FM-DCSK-SWIPT scheme has an appealing feature that it does not require channel state information, th…
Channel modeling is a critical issue when designing or evaluating the performance of reconfigurable intelligent surface (RIS)-assisted communications. Inspired by the promising potential of learning-based methods for characterizing the radio environment, we present a general approach to model the RIS end-to-end equivalent channel using the unsupervised expectation-maximization (EM) learning algorithm. We show that an EM-based approximation through a simple mixture of two Nakagami-$m$ distributions suffices to accurately approximating the equivalent channel, while allowing for the incorporation…
Reconfigurable intelligent surface (RIS) can provide stable connectivity for vehicular communications when direct transmission becomes significantly weaker with dynamic channel conditions between an access point and a moving vehicle. In this paper, we analyze the performance of a RIS-assisted vehicular network by coherently combining received signals reflected by RIS elements and direct transmissions from the source terminal over double generalized Gamma (dGG) fading channels. We present analytical expressions on the outage probability and average bit-error rate (BER) performance of the consid…
Reconfigurable intelligent surfaces (RISs) have sparked a renewed interest in the research community envisioning future wireless communication networks. In this study, we analyzed the performance of RIS-enabled non-orthogonal multiple access (NOMA) based device-to-device (D2D) wireless communication system, where the RIS is partitioned to serve a pair of D2D users. Specifically, closed-form expressions are derived for the upper and lower limits of spectral efficiency (SE) and energy efficiency (EE). In addition, the performance of the proposed NOMA-based system is also compared with its orthog…
Reconfigurable intelligent surface (RIS)-empowered communication is one of the promising 6G technologies that allows the conversion of the wireless channel into an intelligent transmit entity by manipulating the impinging waves using man-made surfaces. In this paper, the potential benefits of using RISs are investigated for indoor/outdoor setups and various frequency bands (from sub 6 GHz to millimeter-waves). First, a general system model with a single RIS is considered and the effect of the total number of reflecting elements on the probabilistic distribution of the received signal-to-noise …
Multi-user (MU) diversity yields sum-rate gains by scheduling a user for transmission at times when its channel is near its peak. The only information required at the base station (BS) for scheduling is the users' signal-to-noise ratios (SNR)s. MU diversity gains are limited in environments with line-of-sight (LoS) channel components and/or spatial correlation. To remedy this, previous works have proposed opportunistic beamforming (OBF) using multiple antennas at the BS to transmit the same signal, modulated by time-varying gains, to the best user at each time slot. In this paper, we propose r…
Innovative reconfigurable intelligent surface (RIS) technologies are rising and recognized as promising candidates to enhance 6G and beyond wireless communication systems. RISs acquire the ability to manipulate electromagnetic signals, thus, offering a degree of control over the wireless channel and the potential for many more benefits. Furthermore, active RIS designs have recently been introduced to combat the critical double fading problem and other impairments passive RIS designs may possess. In this paper, the potential and flexibility of active RIS technology are exploited for uplink syst…
By flexibly manipulating the radio propagation environment, reconfigurable intelligent surface (RIS) is a promising technique for future wireless communications. However, the single-side coverage and double-fading attenuation faced by conventional RISs largely restrict their applications. To address this issue, we propose a novel concept of multi-functional RIS (MF-RIS), which provides reflection, transmission, and amplification simultaneously for the incident signal. With the aim of enhancing the performance of a non-orthogonal multiple-access (NOMA) downlink multiuser network, we deploy an M…
