Enabling technologies of 5G and beyond wireless communication networks, such as millimeter-wave communication, beamforming, and multiple-input multiple-output (MIMO) antenna systems, are becoming increasingly dependent on accurate information of the physical environment for optimized communication performance. The acquisition of this information is a significant challenge, which can be eased by knowledge of the radio environment. Radio environment mapping (REM) has long been considered an enabler of cognitive radios (CRs). However, the limitations of radios effectively confined the application of REM to spectrum sensing and interference mapping. With the advent of more capable software-defined radios and advanced networks, the idea of a truly intelligent communication system empowered by enhanced REM can be realized. To this effect, we propose the generalized radio environment monitoring (G-REM) concept to include all aspects of the radio environment. We outline a general, self contained framework which enables radio environment monitoring in standalone devices. The presented G-REM framework comprises of different information sources, sensing methods, sensing modes, and mapping techniques to enable the realization of more reliable, secure, efficient, and faster future wireless networks. The accompanying challenges and future research direction are also provided.
A low-power wearable wireless sensor measuring both molecular biomarkers and physiological signals is proposed, where the former are measured by a microfluidic biosensing system while the latter are measured electrically. The low-power consumption of the sensor is achieved by an all-analog circuit implementing Analog Joint Source-Channel Coding (AJSCC) compression. The sensor is applicable to a wide range of biomedical applications that require real-time concurrent molecular biomarker and physiological signal monitoring.
This paper addresses the design and implementation of a real-time monitoring system consisting of wireless thermometers for continuous recording of neonate body temperature in an intensive care unit (ICU). Each wireless thermometer incorporates an accurate semiconductor temperature sensor, a transceiver operating on ISM frequency band (i.e., 915 MHz) as well as a microcontroller which is used to control the thermometers functionalities including wireless medium access (e.g., free space or body channel), transmission and reception. A voltage regulator and a low-pass filter were also used for re…
We demonstrated a simple technique for monitoring range variation with millimeter-precision between two remote sites using off-the-shelf wireless communication modules. The need for the flexible positioning of wireless devices is significantly increasing as more devices are being connected and new services are being developed that require devices to collaborate with one another. We showed that one can monitor the distance variation by analyzing the propagation delay of the wireless communication signal between devices. We previously reported a technique for synchronizing clocks with picosecond…
Wireless Sensor Networks(WSN) are a today technology with great practicability in the real world. We focus on describing WSN architecture, regarding usefulness in constructions like structural health monitoring and importance, and advantages of using WSN in this domain
In the past decade, more and more researchers have concentrated on orbital-angular-momentum (OAM) based radio vortex wireless communications, which is expected to provide orthogonality among different OAM-modes. The uniform circular array (UCA) is considered as one promising antenna structure for OAM based radio vortex wireless communications. However, most studies regarding UCA focus on the scenario where the transmit and receive UCAs are aligned with each other. In this paper, we investigate the radio vortex wireless communications with non-coaxial UCA, i.e., the UCA transceivers are paralle…
In this paper, we critically review the potential of today's terrestrial wireless communication systems including wireless cellular technologies (GSM, UMTS, LTE, NR), wireless local area networks (WLANs), and wireless sensor networks (WSNs), for estimating channel state information (CSI), the ratio between training and information symbols and the rate of channel variation, and the potential use of CSI in environment aware wireless communications. The research reveals, that early communication systems provide means for narrowband channel estimation and the CSI is only available as channel atten…
This Innovative Practice Full Paper presents our methodology and tools for introducing competition in the electrical engineering curriculum to accelerate education and innovation in wireless communications. Software radio or software-defined radio (SDR) enables wireless technology, systems and standards education where the student acts as the radio developer or engineer. This is still a huge endeavor because of the complexity of current wireless systems and the diverse student backgrounds. We suggest creating a competition among student teams to potentiate creativity while leveraging the SDR d…
Regular structural monitoring of port structure is crucial to cope with rapid degeneration owing to its exposure to saline and collisional environment. However, most of the inspections are being done visually by human in irregular-basis. To overcome the complication, lots of research related to vibration-based monitoring system with sensor has been devised. Nonetheless, it was difficult to measure ambient vibration due to port's diminutive amplitude and specify the exact timing of berthing, which is the major excitation source. This study developed a novel cloud-AI based wireless sensor system…
Wireless network security may be improved by identifying networked devices via traits that are tied to hardware differences, typically related to unique variations introduced in the manufacturing process. One way these variations manifest is through unique transient events when a radio transmitter is activated or deactivated. Features extracted from these signal bursts have in some cases, shown to provide a unique "fingerprint" for a wireless device. However, only recently have researchers made such data available for research and comparison. Herein, we describe a publicly-available corpus of …
Development of green telecommunication systems is already being considered highly attractive by standard bodies and recently is attracting research attention. While most of the research focuses on modeling and simulation, in this work we implement a lab setup to test an energy aware wireless system based on software defined radio and solar energy power system. In addition, we proposed an energy aware adaptive modulation algorithm that considers the state of charge of the solar energy batteries before setting up the modulation order. Moreover, the algorithm adapts to user preferences between th…
In this paper, the application of hierarchical wireless sensor networks in water quality monitoring is investigated. Adopting a hierarchical structure, the set of sensors is divided into multiple clusters where the value of the sensing parameter is almost constant in each cluster. The members of each cluster transmit their sensing information to the local fusion center (LFC) of their corresponding cluster, where using some fusion rule, the received information is combined, and then possibly sent to a higher-level central fusion center (CFC). A two-phase processing scheme is also envisioned, in…
The fifth-generation (5G) wireless cellular system, which would be deployed by 2020, is expected to deliver significantly higher capacity and better network performance compared to those of the current fourth-generation (4G) system. Specifically, it is predicted that tens of billions of wireless devices will be connected to the wireless network over the next few years, which results in an exponential explosion of mobile data traffic. Therefore, more advanced wireless architecture, as well as radical and innovative access technologies, must be proposed to meet this urgent increasing growth of m…
Wireless all-analog biosensor design for concurrent microfluidic and physiological signal monitoring is presented in this work. The key component is an all-analog circuit capable of compressing two analog sources into one analog signal by Analog Joint Source-Channel Coding (AJSCC). Two circuit designs are discussed, including the stacked-Voltage Controlled Voltage Source (VCVS) design with the fixed number of levels, and an improved design, which supports a flexible number of AJSCC levels. Experimental results are presented on the wireless biosensor prototype, composed of Printed Circuit Board…
Radio-Frequency Inverse Rendering for Wireless Environment Modeling
School of Electronic Information and Communications, Huazhong University of Science and Technology（华中科技大学电子信息与通信学院）；Institute of Artificial Intelligence, Huazhong University of Science and Technology（华中科技大学人工智能与自动化学院）
Coordinating the operations of separate wireless systems at the wavelength level can lead to significant improvements in wireless capabilities. We address a fundamental challenge in distributed radio frequency system cooperation - inter-node phase alignment - which must be accomplished wirelessly, and is particularly challenging when the nodes are in relative motion. We present a solution to this problem that is based on a novel combined high-accuracy ranging and frequency transfer technique. Using this approach, we present the design of the first fully wireless distributed system operating at…
Wireless sensor networks (WSNs) are promising solutions for large infrastructure monitoring because of their ease of installation, computing and communication capability, and cost-effectiveness. Long-term structural health monitoring (SHM), however, is still a challenge because it requires continuous data acquisition for the detection of random events such as earthquakes and structural collapse. To achieve long-term operation, it is necessary to reduce the power consumption of sensor nodes designed to capture random events and, thus, enhance structural safety. In this paper, we present an even…
This paper addresses the performance of systems which use commercial wireless devices to make bistatic RF channel measurements for non-contact respiration sensing. Published research has typically presented results from short controlled experiments on one system. In this paper, we deploy an extensive real-world comparative human subject study. We observe twenty patients during their overnight sleep (a total of 160 hours), during which contact sensors record ground-truth breathing data, patient position is recorded, and four different RF breathing monitoring systems simultaneously record measur…
This paper addresses the design and implementation of a real time temperature monitoring system with applications in telemedicine. The system consists of a number of precision wireless thermometers which are conceived and realized to measure the patients body temperature in hospitals and the intensive care units. Each wireless thermometer incorporates an accurate semiconductor temperature sensor, a transceiver operating at 2.4 GHz and a microcontroller that controls the thermometer functionalities. An array of two thermometers are implemented and successfully evaluated in different scenarios, …
This work presents the design and implementation of a wireless home monitoring and automation system consisting of wireless sensor/actuator nodes, wireless camera, and a home server. The low-cost wireless sensor/actuator node features temperature, light intensity and motion sensors, and actuator driver circuits for the control of motors, heaters, and lights. Server and client programs used to monitor and control the home were also developed. The home server receives and processes sensor readings, such as temperature and light intensity readings, and also transmits user commands to wireless nod…
Since cadiovascular disease (CVD) posts a heavy threat to people's health, long-term electrocardiogram (ECG) monitoring is of great value for the improvement of treatment. To realize remote long-term ECG monitoring, a low-power wireless wearable ECG monitoring device is proposed in this paper. The ECG monitoring device, abbreviated as ECGM, is designed based on ferroelectric microprocessor which provides ultra-low power consumption and contains four parts-MCU, BLE, Sensors and Power. The MCU part means circuit of MSP430FR2433, the core of ECGM. The BLE part is the CC2640R2F module applied for …
We introduce "Wireless 2.0": The future generation of wireless communication networks, where the radio environment becomes controllable, programmable, and intelligent by leveraging the emerging technologies of reconfigurable metasurfaces and artificial intelligence (AI). This paper, in particular, puts the emphasis on AI-based computational methods and commence with an overview of the concept of intelligent radio environments based on reconfigurable meta-surfaces. Later we elaborate on data management aspects, the requirements of supervised learning by examples, and the paradigm of reinforceme…
Detecting the presence of a random wireless source with minimum latency utilizing an array of radio sensors is considered. The problem is studied under the constraint that the analog-to-digital conversion at each sensor is restricted to reading the sign of the analog received signal. We formulate the resulting digital signal processing task as a sequential hypothesis test in simple form. To circumvent the intractable probabilistic model of the multivariate binary array data, a reduced model representation within the exponential family in conjunction with a log-likelihood ratio approximation is…
ECG interval monitoring provides key insights into the diagnosis of cardiac diseases. The standard 12-lead ECG is generally used, however, because of the current COVID-19 pandemic there is a strong need for a remote monitoring solution which will reduce exposure of health care providers to coronavirus. This article presents a disposable wireless patch biosensor (VitalPatch) and associated platform functionalities for real-time continuous measurement of clinically relevant ECG intervals including PR interval, QRS duration, QT interval, corrected QT interval by Bazett (QTb), and corrected QT int…
The increase of cyberattacks using IoT devices has exposed the vulnerabilities in the infrastructures that make up the IoT and have shown how small devices can affect networks and services functioning. This paper presents a review of the vulnerabilities of the wireless technologies that bear the IoT and assessing the experiences in implementing wireless attacks targeting the Internet of Things using Software-Defined Radio (SDR) technologies. A systematic literature review was conducted. The types of vulnerabilities and attacks that can affect the wireless technologies that stand the IoT ecosys…
The rich mobile data and edge computing enabled wireless networks motivate to deploy artificial intelligence (AI) at network edge, known as \emph{edge AI}, which integrates wireless communication and machine learning. In communication, data bits are equally important, while in machine learning some data bits are more important. Therefore we can allocate more radio resources to the more important data and allocate less radio resources to the less important data, so as to efficiently utilize the limited radio resources. To this end, how to define "more or less important" of data is the key probl…
Green radios jointly consider the spectrum efficiency and the energy efficiency in wireless networks in order to provide sustainable development. In the past two decades, various green radio solutions for different types of terminals and radio access networks have been developed, some of which have been used in the designs of wireless products. In this paper, we provide a historical view on some fundamental works and practical issues. In addition to providing a comprehensive overview on theoretical achievements, we also discuss several important power saving solutions with notable engineering …
The design of sensors or "things" as part of the new Internet of Underwater Things (IoUTs) paradigm comes with multiple challenges including limited battery capacity, not polluting the water body, and the ability to track continuously phenomena with high temporal/spatial variability. We claim that traditional digital sensors are incapable to meet these demands because of their high power consumption, high complexity (cost), and the use of non-biodegradable materials. To address the above challenges, we propose a novel architecture consisting of a sensing substrate of dense analog biodegradable…
Toshiba Corporation（东芝公司）；University of Cyprus（塞浦路斯大学）；University of Nottingham（诺丁汉大学）
Reconfigurable Intelligent Surfaces (RISs) promise improved, secure and more efficient wireless communications. We propose and demonstrate how to exploit the diversity offered by RISs to generate and select easily differentiable radio maps for use in wireless fingerprinting localization applications. Further, we apply machine learning feature selection methods to prune the large state space of the RIS, thus reducing complexity and enhancing localization accuracy and position acquisition time. We evaluate our proposed approach by generation of radio maps with a novel radio propagation modelling…
The heterogenous wireless services and exponentially growing traffic call for novel spectrum- and energy-efficient wireless communication technologies. In this paper, a new technique, called symbiotic radio (SR), is proposed to exploit the benefits and address the drawbacks of cognitive radio (CR) and ambient backscattering communications(AmBC), leading to mutualism spectrum sharing and highly reliable backscattering communications. In particular, the secondary transmitter (STx) in SR transmits messages to the secondary receiver (SRx) over the RF signals originating from the primary transmitte…
The research challenge of current Wireless Sensor Networks (WSNs) is to design energy-efficient, low-cost, high-accuracy, self-healing, and scalable systems for applications such as environmental monitoring. Traditional WSNs consist of low density, power-hungry digital motes that are expensive and cannot remain functional for long periods on a single power charge. In order to address these challenges, a dumb-sensing and smart-processing architecture that splits sensing and computation capabilities is proposed. Sensing is exclusively the responsibility of analog substrate---consisting of low-po…
Adant Technologies Inc.（Adant科技公司）；Università di Padova（帕多瓦大学）；Consiglio Nazionale delle Ricerche (CNR)（意大利国家研究委员会）
The paper targets the problem of human motion detection using Wireless Local Area Network devices (WiFi) equipped with pattern reconfigurable antennas. Motion sensing is obtained by monitoring the body-induced alterations of the ambient WiFi signals originated from smart antennas supporting the beam-steering technology, thus allowing to channelize the antenna radiation pattern to pre-defined spots of interest. We first discuss signal and Channel State Information (CSI) processing and sanitization. Next, we describe the motion detection algorithm based on Angle-of-Arrival (AoA) monitoring. Prop…
Rapid LoRA Aggregation for Wireless Channel Adaptation in Open-Set Radio Frequency Fingerprinting
School of Internet of Things, Nanjing University of Posts and Telecommunications（南京邮电大学物联网学院）；School of Cyber Science and Engineering, Southeast University（东南大学网络空间安全学院）；National Mobile Communications Research Lab, Southeast University（东南大学国家移动通信研究中心）
