We study decentralized estimation of time-varying signals at a fusion center, when energy harvesting sensors transmit sampled data over rate-constrained links. We propose dynamic strategies to select radio parameters, sampling set, and harvested energy at each node, with the aim of estimating a time-varying signal while ensuring: i) accuracy of the recovery procedure, and ii) stability of the batteries around a prescribed operating level. The approach is based on stochastic optimization tools, which enable adaptive optimization without the need of apriori knowledge of the statistics of radio channels and energy arrivals processes. Numerical results validate the proposed approach for decentralized signal estimation under communication and energy constraints typical of Internet of Things (IoT) scenarios.
Advances in low-power electronics and machine learning techniques lead to many novel wearable IoT devices. These devices have limited battery capacity and computational power. Thus, energy harvesting from ambient sources is a promising solution to power these low-energy wearable devices. They need to manage the harvested energy optimally to achieve energy-neutral operation, which eliminates recharging requirements. Optimal energy management is a challenging task due to the dynamic nature of the harvested energy and the battery energy constraints of the target device. To address this challenge,…
Decentralized Federated Learning With Energy Harvesting Devices
Department of Electronic and Computer Engineering, The Hong Kong University of Science and Technology（香港科技大学电子与计算机工程系）；School of Electrical Engineering and Computer Science, Washington State University（华盛顿州立大学电气与计算机科学学院）
Outage Probability Analysis of NOMA Enabled Hierarchical UAV Networks with Non-Linear Energy Harvesting
Ecole Nationale Supérieure des Technologies Avancées（国立高级技术学院）；University of El-Oued（欧德大学）；Ankara Yıldırım Beyazıt University（安卡拉伊尔迪里姆贝亚齐特大学）；Carleton University（卡尔顿大学）；King AbdulAziz University（阿卜杜勒阿齐兹国王大学）
Simultaneous wireless information and power transfer (SWIPT) has recently gathered much research interest from both academia and industry as a key enabler of energy harvesting Internet-of-things (IoT) networks. Due to a number of growing use cases of such networks, it is important to study their performance limits from the perspective of physical layer security (PLS). With this intent, this work aims to provide a novel analysis of the ergodic secrecy capacity of a SWIPT system is provided for Rician and Nakagami-m faded communication links. For a realistic evaluation of the system, the imperfe…
NarrowBand-Internet of Things (NB-IoT) is a new 3GPP radio access technology designed to provide better coverage for a massive number of low-throughput low-cost devices in delay-tolerant applications with low power consumption. To provide reliable connections with extended coverage, a repetition transmission scheme is introduced to NB-IoT during both Random Access CHannel (RACH) procedure and data transmission procedure. To avoid the difficulty in replacing the battery for IoT devices, the energy harvesting is considered as a promising solution to support energy sustainability in the NB-IoT ne…
Information freshness is crucial for time-critical IoT applications, e.g., monitoring and control systems. We consider an IoT status update system with multiple users, multiple energy harvesting sensors, and a wireless edge node. The users receive time-sensitive information about physical quantities, each measured by a sensor. Users send requests to the edge node where a cache contains the most recently received measurements from each sensor. To serve a request, the edge node either commands the sensor to send a status update or retrieves the aged measurement from the cache. We aim at finding …
We consider a resource-constrained IoT network, where multiple users make on-demand requests to a cache-enabled edge node to send status updates about various random processes, each monitored by an energy harvesting sensor. The edge node serves users' requests by deciding whether to command the corresponding sensor to send a fresh status update or retrieve the most recently received measurement from the cache. Our objective is to find the best actions of the edge node to minimize the average age of information (AoI) of the received measurements upon request, i.e., average on-demand AoI, subjec…
Considering ubiquitous connectivity and advanced information processing capability, huge amount of low-power IoT devices are deployed nowadays and the maintenance of those devices which includes firmware/software updates and recharging the units has become a bottleneck for IoT systems. For addressing limited battery constraints, wireless power transfer is a promising approach such that it does not require any physical link between energy harvester and power transfer. Furthermore, combining wireless power transfer with information transmission has become more appealing. In the systems that appl…
The ever-evolving internet of things (IoT) has led to the growth of numerous wireless sensors, communicating through the internet infrastructure. When designing a network using these sensors, one critical aspect is the longevity and self-sustainability of these devices. For extending the lifetime of these sensors, radio frequency energy harvesting (RFEH) technology has proved to be promising. In this paper, we propose CURE, a novel framework for RFEH that effectively combines the benefits of cell-free massive MIMO (CFmMIMO), unmanned aerial vehicles (UAVs), and reconfigurable intelligent surfa…
Mobile edge computing (MEC) has recently become a prevailing technique to alleviate the intensive computation burden in Internet of Things (IoT) networks. However, the limited device battery capacity and stringent spectrum resource significantly restrict the data processing performance of MEC-enabled IoT networks. To address the two performance limitations, we consider in this paper an MEC-enabled IoT system with an energy harvesting (EH) wireless device (WD) which opportunistically accesses the licensed spectrum of an overlaid primary communication link for task offloading. We aim to maximize…
With the number of communicating sensors linked to the Internet of Things (IoT) ecosystem in-creasing dramatically, well-designed indoor light energy harvesting solutions are needed. The first step towards this development is to determine the harvestable energy in real indoor environ-ments. But the harvestable energy varying over time with nature (spectra) and intensity of the light multi-sources, lighting data must be collected for sufficiently long periods. Besides, for a real implementation on-site, studies must be able to be carried out simultaneously in several places to determine locatio…
There is an increasing demand for intelligent processing on emerging ultra-low-power internet of things (IoT) devices, and recent works have shown substantial efficiency boosts by executing inference tasks directly on the IoT device (node) rather than merely transmitting sensor data. However, the computation and power demands of Deep Neural Network (DNN)-based inference pose significant challenges for nodes in an energy-harvesting wireless sensor network (EH-WSN). Moreover, these tasks often require responses from multiple physically distributed EH sensor nodes, which imposes crucial system op…
Decentralized Indoor Localization Based on A Sparse Gaussian Process with Reduced-Dimensional Inputs for Real-Time Sensing and Training on IoT Devices
Institute of Cyberspace Security, College of Information Engineering, Zhejiang University of Technology（浙江工业大学信息工程学院网络空间安全研究所）；Binjiang Institute of Artificial Intelligence, Zhejiang University of Technology（浙江工业大学滨江人工智能研究院）；School of Artificial Intelligence, Suzhou Institute of Industrial Technology（苏州工业职业技术学院人工智能学院）；School of Advanced Technology, Xi’an Jiaotong-Liverpool University（西交利物浦大学先进技术学院）；University of Liverpool（利物浦大学）；D5 Data Co., Ltd.（D5数据有限公司）
To sustain communication reliability and use the harvested energy effectively, it is crucial to consider energy sharing between energy harvesting tags (EHT) in a multiple access network, which are basic building blocks for the internet of things (IoT) applications. This technique also achieves higher throughput compared with the non-cooperative strategies despite energy losses occurred during energy transfer. We propose an energy cooperative communication strategy for a multiple access network of tags that depends on the harvested battery energy. We develop an optimal transmission policy for E…
Age of information (AoI) is one of the key performance metrics for Internet of things (IoT) systems. Timely status updates are essential for many IoT applications; however, they are subject to strict constraints related on the available energy and unreliability of underlying information sources. Hence, the scheduling of status updates must be carefully planned to preserve energy, but at the same time, it may happen that when a status update is needed, there is no reliable up-to-date information content to refresh. As a solution to overcome these unpredictabilities, one can employ multiple sour…
