This paper proposes and investigates an overlay spectrum sharing system in conjunction with the simultaneous wireless information and power transfer (SWIPT) to enable communications for the Internet of Things (IoT) applications. Considered is a cooperative cognitive radio network, where two IoT devices (IoDs) exchange their information and also provide relay assistance to a pair of primary users (PUs). Different from most existing works, in this paper, both IoDs can harvest energy from the radio-frequency (RF) signals received from the PUs. By utilizing the harvested energy, they provide relay cooperation to PUs and realize their own communications. For harvesting energy, a time-switching (TS) based approach is adopted at both IoDs. With the proposed scheme, one round of bidirectional information exchange for both primary and IoT systems is performed in four phases, i.e., one energy harvesting (EH) phase and three information processing (IP) phases. Both IoDs rely on the decode-and-forward operation to facilitate relaying, whereas the PUs employ selection combining (SC) technique. For investigating the performance of the considered network, this paper first provides exact expressions of user outage probability (OP) for the primary and IoT systems under Nakagami-m fading. Then, by utilizing the expressions of user OP, the system throughput and energy efficiency are quantified together with the average end-to-end transmission time. Numerical and simulation results are provided to give useful insights into the system behavior and to highlight the impact of various system/channel parameters.
In this paper, we consider an overlay satellite-terrestrial network (OSTN) where an opportunistically selected terrestrial internet-of-things (IoT) network assists the primary satellite communications as well as accesses the spectrum for its own communications under hybrid interference received from extra-terrestrial sources (ETSs) and terrestrial sources (TSs). Herein, the IoT network adopts power-domain multiplexing to amplify-and-forward the superposed satellite and IoT signals. Considering a unified analytical framework for shadowed-Rician fading with integer/non-integer Nakagami-\emph{m} …
In this paper, we consider an overlay satellite-terrestrial network (OSTN) where an opportunistically selected terrestrial IoT network assist primary satellite communications as well as access the spectrum for its own communications in the presence of combined interference from extra-terrestrial and terrestrial sources. Hereby, a power domain multiplexing is adopted by the IoT network by splitting its power appropriately among the satellite and IoT signals. Relying upon an amplify-and-forward (AF)-based opportunistic IoT network selection strategy that minimizes the outage probability (OP) of …
We consider a cognitive radio-based Internet-of-Things (CR-IoT) network consisting of one primary IoT (PIoT) system and one secondary IoT (SIoT) system. The IoT devices of both the PIoT and the SIoT respectively monitor one physical process and send randomly generated status updates to their associated access points (APs). The timeliness of the status updates is important as the systems are interested in the latest condition (e.g., temperature, speed and position) of the IoT device. In this context, two natural questions arise: (1) How to characterize the timeliness of the status updates in CR…
This paper considers a cooperative cognitive radio network with two primary users (PUs) and two secondary users (SUs) that enables two-way communications of primary and secondary systems in conjunction with non-linear energy harvesting based simultaneous wireless information and power transfer (SWIPT). With the considered network, SUs are able to realize their communications over the licensed spectrum while extending relay assistance to the PUs. The overall bidirectional end-to-end transmission takes place in four phases, which include both energy harvesting (EH) and information transfer. A no…
This paper investigates dual-layer non-orthogonally superimposed transmissions for industrial internet of things (IoT) millimeter-wave communications. Essentially, the overlayer is a ubiquitous multicast signal devised to serve all the devices in coverage with a common message, i.e., critical control packet. The underlayer is a composite signal that consists of private unicast messages. Due to safety implications, it is critical that all devices can decode the multicast information. To ensure this requirement, we jointly optimize the hybrid precoder, analog combiners, power allocation, and fai…
Battery-powered wireless IoT devices are now widely seen in many critical applications. Given the limited battery capacity and inaccessibility to external power recharge, optimizing energy efficiency (EE) plays a vital role in prolonging the lifetime of these IoT devices. However, a sheer amount of existing works only focus on the EE design at the infrastructure level such as base stations (BSs) but with little attention to the EE design at the device level. In this paper, we propose a novel idea that aims to shift energy consumption to a grid-powered cognitive radio mesh network thus preservi…
Mobile edge computing (MEC) has recently become a prevailing technique to alleviate the intensive computation burden in Internet of Things (IoT) networks. However, the limited device battery capacity and stringent spectrum resource significantly restrict the data processing performance of MEC-enabled IoT networks. To address the two performance limitations, we consider in this paper an MEC-enabled IoT system with an energy harvesting (EH) wireless device (WD) which opportunistically accesses the licensed spectrum of an overlaid primary communication link for task offloading. We aim to maximize…
We present a novel method for centralized collaborative spectrum sensing for IoT network leveraging cognitive radio network. Based on an online learning framework, we propose an algorithm to efficiently combine the individual sensing results based on the past performance of each detector. Additionally, we show how to utilize the learned normalized weights as a proxy metric of detection accuracy and selectively enable the sensing at detectors. Our results show improved performance in terms of inter-user collision and misdetection. Further, by selectively enabling some of the devices in the netw…
This letter analyzes the performance of simultaneous wireless information-and-power transfer (SWIPT) in an overlay cognitive radio network (CRN) under Nakagami-$m$ fading. A pair of secondary users (SUs) is considered in which one SU facilitates relay cooperation for communications between two primary users (PUs). In return, SUs make use of primary users' signals for energy harvesting (EH) and realize their own communications. In such a network, end-to-end bidirectional communications between the two PUs and unidirectional information exchange between the SUs can be performed in three phases. …
In this paper, we develop a new framework called blockchain-based Radio Frequency (RF)-powered backscatter cognitive radio network. In the framework, IoT devices as secondary transmitters transmit their sensing data to a secondary gateway by using the RF-powered backscatter cognitive radio technology. The data collected at the gateway is then sent to a blockchain network for further verification, storage and processing. As such, the framework enables the IoT system to simultaneously optimize the spectrum usage and maximize the energy efficiency. Moreover, the framework ensures that the data co…
It has become very essential to address the limited spectrum capacity and their efficient utilization to support the increasing number of Internet of Things devices. When it comes to medical infrastructure, it becomes very imperative for medical devices to communicate with the base station. In such situations, communication over the wireless medium must provide optimized throughput (data rate) with effectual energy usage, which will ensure precise medical feedback by the responsible staff. Taking into account, it is necessary to operate wireless communication precisely at a higher frequency wi…
Over the recent years, the proliferation of smart devices and their applications has led to a rapid evolution of the concept of the Internet of Things (IoT), advancing large scale machine type networks which are characterized by sporadic transmissions of short packets. In contrast to typical communication models and in order to capture a realistic IoT environment, we study an asynchronous channel access performed by a primary ad hoc network underlaid with a cognitive secondary wireless-powered ad hoc network. Specifically, we consider that the primary transmitters are connected to the power gr…
Chongqing University of Posts and Telecommunications（重庆邮电大学）；Anqing Normal University（安庆师范大学）；Nanyang Technological University（南洋理工大学）
The combination of energy harvesting (EH), cognitive radio (CR), and non-orthogonal multiple access (NOMA) is a promising solution to improve energy efficiency and spectral efficiency of the upcoming beyond fifth generation network (B5G), especially for support the wireless sensor communications in Internet of things (IoT) system. However, how to realize intelligent frequency, time, and energy resource allocation to support better performances is an important problem to be solved. In this paper, we study joint spectrum, energy, and time resource management for the EH-CR-NOMA IoT systems. Our g…
Mohamed Bin Zayed University of Artificial Intelligence（穆罕默德·本·扎耶德人工智能大学）；Technology Innovation Institute（技术创新研究所）
The development of the Internet of Things (IoT) has dramatically expanded our daily lives, playing a pivotal role in the enablement of smart cities, healthcare, and buildings. Emerging technologies, such as IoT, seek to improve the quality of service in cognitive cities. Although IoT applications are helpful in smart building applications, they present a real risk as the large number of interconnected devices in those buildings, using heterogeneous networks, increases the number of potential IoT attacks. IoT applications can collect and transfer sensitive data. Therefore, it is necessary to de…
Radio Frequency powered Cognitive Radio Networks (RF-CRN) are likely to be the eyes and ears of upcoming modern networks such as Internet of Things (IoT), requiring increased decentralization and autonomous operation. To be considered autonomous, the RF-powered network entities need to make decisions locally to maximize the network throughput under the uncertainty of any network environment. However, in complex and large-scale networks, the state and action spaces are usually large, and existing Tabular Reinforcement Learning technique is unable to find the optimal state-action policy quickly.…
The increase of cyberattacks using IoT devices has exposed the vulnerabilities in the infrastructures that make up the IoT and have shown how small devices can affect networks and services functioning. This paper presents a review of the vulnerabilities of the wireless technologies that bear the IoT and assessing the experiences in implementing wireless attacks targeting the Internet of Things using Software-Defined Radio (SDR) technologies. A systematic literature review was conducted. The types of vulnerabilities and attacks that can affect the wireless technologies that stand the IoT ecosys…
Cognitive backscattering, an integration of cognitive radio and backsatter modulation, is emerging as a potential candidate for green Internet of Things (IoT). In cognitive backscatter systems, the backscatter device (BD) shares not only the same spectrum, but also the same radio-frequency (RF) source with the legacy system. In this paper, we investigate the signal transmission problem, in which a basic transmission model is considered which consists of K RF sources, one BD and one reader equipped with M antennas. A non-cooperative scenario is considered, where there is no cooperation between …
In fifth generation (5G) and beyond Internet of Things (IoT), it becomes increasingly important to serve a massive number of IoT devices outside the coverage of terrestrial cellular networks. Due to their own limitations, unmanned aerial vehicles (UAVs) and satellites need to coordinate with each other in the coverage holes of 5G, leading to a cognitive satellite-UAV network (CSUN). In this paper, we investigate multi-domain resource allocation for CSUNs consisting of a satellite and a swarm of UAVs, so as to improve the efficiency of massive access in wide areas. Particularly, the cell-free o…
As the Internet of Things (IoT) technology is being deployed, the demand for radio spectrum is increasing. Cognitive radio (CR) is one of the most promising solutions to allow opportunistic spectrum access for IoT secondary users through utilizing spectrum holes resulting from the underutilization of frequency spectrum. A CR needs to frequently sense the spectrum to avoid interference with primary users (PUs). Compressive spectrum sensing techniques have been gaining increasing interest in wideband spectrum sensing, as they reduce the need for high-rate analog-to-digital converters, reducing t…
Current and future wireless applications strongly rely on precise real-time localization. A number of applications such as smart cities, Internet of Things (IoT), medical services, automotive industry, underwater exploration, public safety, and military systems require reliable and accurate localization techniques. Generally, the most popular localization/ positioning system is the Global Positioning System (GPS). GPS works well for outdoor environments but fails in indoor and harsh environments. Therefore, a number of other wireless local localization techniques are developed based on terrest…
Auburn University at Montgomery（奥本大学蒙哥马利分校）；Qingdao University（青岛大学）；Embry-Riddle Aeronautical University（安柏瑞德航空大学）；Bowling Green State University（鲍灵格林州立大学）
The Internet of Things (IoT) is reshaping modern society by allowing a decent number of RF devices to connect and share information through RF channels. However, such an open nature also brings obstacles to surveillance. For alleviation, a surveillance oracle, or a cognitive communication entity needs to identify and confirm the appearance of known or unknown signal sources in real-time. In this paper, we provide a deep learning framework for RF signal surveillance. Specifically, we jointly integrate the Deep Neural Networks (DNNs) and Quickest Detection (QD) to form a sequential signal survei…
