It has become very essential to address the limited spectrum capacity and their efficient utilization to support the increasing number of Internet of Things devices. When it comes to medical infrastructure, it becomes very imperative for medical devices to communicate with the base station. In such situations, communication over the wireless medium must provide optimized throughput (data rate) with effectual energy usage, which will ensure precise medical feedback by the responsible staff. Taking into account, it is necessary to operate wireless communication precisely at a higher frequency with more substantial bandwidth and low latency. Cognitive Radio (CR) is traditionally a viable choice, where it identifies and utilizes the vacant spectrum, thus maximizing the primary user's capacity and achieving spectral efficiency. To ensure such outcomes, the Non-Orthogonal Multiple Access (NOMA) techniques have proven to deliver an effective solution to the increasing number of devices with unimpaired performance, especially when the communication shifts towards a higher frequency band such as the mmWave band. In this chapter, IoT based CR network in uplink communication is proposed alongside employing NOMA techniques for optimal throughput, and energy efficiency for a medical infrastructure. Numerical results show that effectual throughput and energy efficiency for a High Reliable Communication (HRC) device and Moderate Reliable Communication (MRC) device improve over 83.13% and 73.95%, respectively and their corresponding energy efficacy values show vast improvement (83.11% and 73.96% respectively). Likewise, for interference case both the throughput and the energy efficiency improve approximately over 93% for all devices.
In this paper, we develop a new framework called blockchain-based Radio Frequency (RF)-powered backscatter cognitive radio network. In the framework, IoT devices as secondary transmitters transmit their sensing data to a secondary gateway by using the RF-powered backscatter cognitive radio technology. The data collected at the gateway is then sent to a blockchain network for further verification, storage and processing. As such, the framework enables the IoT system to simultaneously optimize the spectrum usage and maximize the energy efficiency. Moreover, the framework ensures that the data co…
We consider a cognitive radio-based Internet-of-Things (CR-IoT) network consisting of one primary IoT (PIoT) system and one secondary IoT (SIoT) system. The IoT devices of both the PIoT and the SIoT respectively monitor one physical process and send randomly generated status updates to their associated access points (APs). The timeliness of the status updates is important as the systems are interested in the latest condition (e.g., temperature, speed and position) of the IoT device. In this context, two natural questions arise: (1) How to characterize the timeliness of the status updates in CR…
Battery-powered wireless IoT devices are now widely seen in many critical applications. Given the limited battery capacity and inaccessibility to external power recharge, optimizing energy efficiency (EE) plays a vital role in prolonging the lifetime of these IoT devices. However, a sheer amount of existing works only focus on the EE design at the infrastructure level such as base stations (BSs) but with little attention to the EE design at the device level. In this paper, we propose a novel idea that aims to shift energy consumption to a grid-powered cognitive radio mesh network thus preservi…
University of Guelph（圭尔夫大学）；University of Toronto（多伦多大学）
Over the years, the popularity and usage of wearable Internet of Things (IoT) devices in several healthcare services are increased. Among the services that benefit from the usage of such devices is predictive analysis, which can improve early diagnosis in e-health. However, due to the limitations of wearable IoT devices, challenges in data privacy, service integrity, and network structure adaptability arose. To address these concerns, we propose a platform using federated learning and private blockchain technology within a fog-IoT network. These technologies have privacy-preserving features se…
Principal component analysis (PCA) is a powerful data reductionmethod for Structural Health Monitoring. However, its computa-tional cost and data memory footprint pose a significant challengewhen PCA has to run on limited capability embedded platformsin low-cost IoT gateways. This paper presents a memory-efficientparallel implementation of the streaming History PCA algorithm.On our dataset, it achieves 10x compression factor and 59x memoryreduction with less than 0.15 dB degradation in the reconstructedsignal-to-noise ratio (RSNR) compared to standard PCA. More-over, the algorithm benefits fro…
Monitoring of civil infrastructures is critically needed to track aging, damages and ultimately to prevent severe failures which can endanger many lives. The ability to monitor in a continuous and fine-grained fashion the integrity of a wide variety of buildings, referred to as structural health monitoring, with low-cost, long-term and continuous measurements is essential from both an economic and a life-safety standpoint. To address these needs, we propose a low-cost wireless sensor node specifically designed to support modal analysis over extended periods of time with long-range connectivity…
Code index modulated multi-carrier M-ary differential chaos shift keying (CIM-MC-M-DCSK) system not only inherits low-power and low-complexity advantages of the conventional DCSK system, but also significantly increases the transmission rate. This feature is of particular importance to Internet of Things (IoT) with trillions of low-cost devices. In particular, for e-health IoT applications, an efficient transmission scheme is designed to solve the challenge of the limited battery capacity for numerous user equipments served by one base station. In this paper, a new multiple-input-single-output…
Rice University（莱斯大学）；University of Houston-Downtown（休斯顿大学市中心分校）；Prudence Medical Technologies Ltd.（审慎医疗技术有限公司）
The Internet of Things (IoT) revolution has shown potential to give rise to many medical applications with access to large volumes of healthcare data collected by IoT devices. However, the increasing demand for healthcare data privacy and security makes each IoT device an isolated island of data. Further, the limited computation and communication capacity of wearable healthcare devices restrict the application of vanilla federated learning. To this end, we propose an advanced federated learning framework to train deep neural networks, where the network is partitioned and allocated to IoT devic…
Internet of Things (IoTs) is an emerging trend that has enabled an upgrade in the design of wearable healthcare monitoring systems through the (integrated) edge, fog, and cloud computing paradigm. Energy efficiency is one of the most important design metrics in such IoT-healthcare systems especially, for the edge and fog nodes. Due to the sensing noise and inherent redundancy in the input data, even the most safety-critical biomedical applications can sometimes afford a slight degradation in the output quality. Hence, such inherent error tolerance in the bio-signals can be exploited to achieve…
This paper proposes and investigates an overlay spectrum sharing system in conjunction with the simultaneous wireless information and power transfer (SWIPT) to enable communications for the Internet of Things (IoT) applications. Considered is a cooperative cognitive radio network, where two IoT devices (IoDs) exchange their information and also provide relay assistance to a pair of primary users (PUs). Different from most existing works, in this paper, both IoDs can harvest energy from the radio-frequency (RF) signals received from the PUs. By utilizing the harvested energy, they provide relay…
DUET（达卡工程技术大学）；EUB（欧洲孟加拉大学）；JNU（贾汉吉尔纳加尔大学）；Daffodil International University（达福迪尔国际大学）；BUP（孟加拉国国父和平大学）
Nearly 30% of the people in the rural areas of Bangladesh are below the poverty level. Moreover, due to the unavailability of modernized healthcare-related technology, nursing and diagnosis facilities are limited for rural people. Therefore, rural people are deprived of proper healthcare. In this perspective, modern technology can be facilitated to mitigate their health problems. ECG sensing tools are interfaced with the human chest, and requisite cardiovascular data is collected through an IoT device. These data are stored in the cloud incorporates with the MQTT and HTTP servers. An innovativ…
An accurate and reliable technique for predicting Remaining Useful Life (RUL) for battery cells proves helpful in battery-operated IoT devices, especially in remotely operated sensor nodes. Data-driven methods have proved to be the most effective methods until now. These IoT devices have low computational capabilities to save costs, but Data-Driven battery health techniques often require a comparatively large amount of computational power to predict SOH and RUL due to most methods being feature-heavy. This issue calls for ways to predict RUL with the least amount of calculations and memory. Th…
Over the recent years, the proliferation of smart devices and their applications has led to a rapid evolution of the concept of the Internet of Things (IoT), advancing large scale machine type networks which are characterized by sporadic transmissions of short packets. In contrast to typical communication models and in order to capture a realistic IoT environment, we study an asynchronous channel access performed by a primary ad hoc network underlaid with a cognitive secondary wireless-powered ad hoc network. Specifically, we consider that the primary transmitters are connected to the power gr…
University of Padova（帕多瓦大学）；National Centre for Neurology and Psychiatry（国家神经精神病学中心）；National Inter-University Consortium for Telecommunications (CNIT)（全国大学间电信联盟（CNIT））；University of Milan（米兰大学）；University of Milano-Bicocca（米兰比可卡大学）；Istituto Auxologico Italiano IRCCS（意大利辅助研究所IRCCS）；Catholic University of Milan（米兰天主教大学）
As the worldwide population gets increasingly aged, in-home telemedicine and mobile-health solutions represent promising services to promote active and independent aging and to contribute to a paradigm shift towards patient-centric healthcare. In this work, we present ACTA (Advanced Cognitive Training for Aging), a prototype mobile-health solution to provide advanced cognitive training for senior citizens with mild cognitive impairments. We disclose here the conceptualization of ACTA as the integration of two promising rehabilitation strategies: the "Nudge theory", from the cognitive domain, a…
Real-time physiological data collection and analysis play a central role in modern well-being applications. Personalized classifiers and detectors have been shown to outperform general classifiers in many contexts. However, building effective personalized classifiers in everyday settings - as opposed to controlled settings - necessitates the online collection of a labeled dataset by interacting with the user. This need leads to several challenges, ranging from building an effective system for the collection of the signals and labels, to developing strategies to interact with the user and build…
Mobile edge computing (MEC) has recently become a prevailing technique to alleviate the intensive computation burden in Internet of Things (IoT) networks. However, the limited device battery capacity and stringent spectrum resource significantly restrict the data processing performance of MEC-enabled IoT networks. To address the two performance limitations, we consider in this paper an MEC-enabled IoT system with an energy harvesting (EH) wireless device (WD) which opportunistically accesses the licensed spectrum of an overlaid primary communication link for task offloading. We aim to maximize…
We present a novel method for centralized collaborative spectrum sensing for IoT network leveraging cognitive radio network. Based on an online learning framework, we propose an algorithm to efficiently combine the individual sensing results based on the past performance of each detector. Additionally, we show how to utilize the learned normalized weights as a proxy metric of detection accuracy and selectively enable the sensing at detectors. Our results show improved performance in terms of inter-user collision and misdetection. Further, by selectively enabling some of the devices in the netw…
