This letter analyzes the performance of simultaneous wireless information-and-power transfer (SWIPT) in an overlay cognitive radio network (CRN) under Nakagami-$m$ fading. A pair of secondary users (SUs) is considered in which one SU facilitates relay cooperation for communications between two primary users (PUs). In return, SUs make use of primary users' signals for energy harvesting (EH) and realize their own communications. In such a network, end-to-end bidirectional communications between the two PUs and unidirectional information exchange between the SUs can be performed in three phases. A power splitting (PS) based approach is adopted for enabling SWIPT. The relaying SU applies an amplify-and-forward (AF) protocol to broadcast primary and secondary signals, whereas the PUs perform selection combining to access the active direct link. Accurate expressions of the outage probability (OP) and throughput are derived for the primary system by considering a nonlinear energy harvester at the relaying SU under Nakagami-m fading
Radio waves carry both energy and information simultaneously. Nevertheless, Radio-Frequency (RF) transmission of these quantities have traditionally been treated separately. Currently, we are experiencing a paradigm shift in wireless network design, namely unifying wireless transmission of information and power so as to make the best use of the RF spectrum and radiations as well as the network infrastructure for the dual purpose of communicating and energizing. In this paper, we review and discuss recent progress on laying the foundations of the envisioned dual purpose networks by establishing…
Wireless power transfer (WPT) is an emerging paradigm that will enable using wireless to its full potential in future networks, not only to convey information but also to deliver energy. Such networks will enable trillions of future low-power devices to sense, compute, connect, and energize anywhere, anytime, and on the move. The design of such future networks brings new challenges and opportunities for signal processing, machine learning, sensing, and computing so as to make the best use of the RF radiations, spectrum, and network infrastructure in providing cost-effective and real-time power…
Physical layer security is known as a promising paradigm to ensure security for the beyond 5G (B5G) networks in the presence of eavesdroppers. In this paper, we elaborate on a tractable analysis framework to evaluate the reliability and security of wireless-powered decode-and-forward (DF) multi-relay networks. The nonlinear energy harvesters, in-phase and quadrature-phase imbalance (IQI) and channel estimation errors (CEEs) are taken into account in the considered system. To further improve the secure performance, two relay selection strategies are presented: 1) suboptimal relay selection (SRS…
We consider a cognitive wireless powered communication network (CWPCN) sharing the spectrum with a primary network who faces security threats from eavesdroppers (EAVs). We propose a new cooperative protocol for the wireless powered secondary users (SU) to cooperate with the primary user (PU). In the protocol, the SUs first harvest energy from the power signals transmitted by the cognitive hybrid access point during the wireless power transfer (WPT) phase, and then use the harvested energy to interfere with the EAVs and gain transmission opportunities at the same time during the wireless inform…
Over the recent years, the proliferation of smart devices and their applications has led to a rapid evolution of the concept of the Internet of Things (IoT), advancing large scale machine type networks which are characterized by sporadic transmissions of short packets. In contrast to typical communication models and in order to capture a realistic IoT environment, we study an asynchronous channel access performed by a primary ad hoc network underlaid with a cognitive secondary wireless-powered ad hoc network. Specifically, we consider that the primary transmitters are connected to the power gr…
This paper considers a cooperative cognitive radio network with two primary users (PUs) and two secondary users (SUs) that enables two-way communications of primary and secondary systems in conjunction with non-linear energy harvesting based simultaneous wireless information and power transfer (SWIPT). With the considered network, SUs are able to realize their communications over the licensed spectrum while extending relay assistance to the PUs. The overall bidirectional end-to-end transmission takes place in four phases, which include both energy harvesting (EH) and information transfer. A no…
Nanyang Technological University（南洋理工大学）；University of Electronic Science and Technology of China（电子科技大学）；Sungkyunkwan University（成均馆大学）
In an RF-powered backscatter cognitive radio network, multiple secondary users communicate with a secondary gateway by backscattering or harvesting energy and actively transmitting their data depending on the primary channel state. To coordinate the transmission of multiple secondary transmitters, the secondary gateway needs to schedule the backscattering time, energy harvesting time, and transmission time among them. However, under the dynamics of the primary channel and the uncertainty of the energy state of the secondary transmitters, it is challenging for the gateway to find a time schedul…
In this paper, we develop a new framework called blockchain-based Radio Frequency (RF)-powered backscatter cognitive radio network. In the framework, IoT devices as secondary transmitters transmit their sensing data to a secondary gateway by using the RF-powered backscatter cognitive radio technology. The data collected at the gateway is then sent to a blockchain network for further verification, storage and processing. As such, the framework enables the IoT system to simultaneously optimize the spectrum usage and maximize the energy efficiency. Moreover, the framework ensures that the data co…
The Internet of Things (IoT) has important applications in our daily lives including health and fitness tracking, environmental monitoring and transportation. However, sensor nodes in IoT suffer from the limited lifetime of batteries resulting from their finite energy availability. A promising solution is to harvest energy from environmental sources, such as solar, kinetic, thermal and radio frequency, for perpetual and continuous operation of IoT sensor nodes. In addition to energy generation, recently energy harvesters have been used for context detection, eliminating the need for additional…
Battery-powered wireless IoT devices are now widely seen in many critical applications. Given the limited battery capacity and inaccessibility to external power recharge, optimizing energy efficiency (EE) plays a vital role in prolonging the lifetime of these IoT devices. However, a sheer amount of existing works only focus on the EE design at the infrastructure level such as base stations (BSs) but with little attention to the EE design at the device level. In this paper, we propose a novel idea that aims to shift energy consumption to a grid-powered cognitive radio mesh network thus preservi…
Billions of everyday objects could become part of the Internet of Things (IoT) by augmentation with low-cost, long-range, maintenance-free wireless sensors. Radio Frequency Identification (RFID) is a low-cost wireless technology that could enable this vision, but it is constrained by short communication range and lack of sufficient energy available to power auxiliary electronics and sensors. Here, we explore the use of flexible perovskite photovoltaic cells to provide external power to semi-passive RFID tags to increase range and energy availability for external electronics such as microcontro…
Photovoltaic (PV) cells have the potential to serve as on-board power sources for low-power IoT devices. Here, we explore the use of perovskite solar cells to power Radio Frequency (RF) backscatter-based IoT devices with a few μW power demand. Perovskites are suitable for low-cost, high-performance, low-temperature processing, and flexible light energy harvesting that hold the possibility to significantly extend the range and lifetime of current backscatter techniques such as Radio Frequency Identification (RFID). For these reasons, perovskite solar cells are prominent candidates for future lo…
Radio Frequency powered Cognitive Radio Networks (RF-CRN) are likely to be the eyes and ears of upcoming modern networks such as Internet of Things (IoT), requiring increased decentralization and autonomous operation. To be considered autonomous, the RF-powered network entities need to make decisions locally to maximize the network throughput under the uncertainty of any network environment. However, in complex and large-scale networks, the state and action spaces are usually large, and existing Tabular Reinforcement Learning technique is unable to find the optimal state-action policy quickly.…
Neural Networks (NNs) are steering a new generation of artificial intelligence (AI) applications at the micro-edge. Examples include wireless sensors, wearables and cybernetic systems that collect data and process them to support real-world decisions and controls. For energy autonomy, these applications are typically powered by energy harvesters. As harvesters and other power sources which provide energy autonomy inevitably have power variations, the circuits need to robustly operate over a dynamic power envelope. In other words, the NN hardware needs to be able to function correctly under unp…
Intensive research on energy harvested sensor nodes with traditional battery powered devices has been driven by the challenges in achieving the stringent design goals of battery lifetime, information accuracy, transmission distance, and cost. This challenge is further amplified by the inherent power intensive nature of long-range communication when sensor networks are required to span vast areas such as agricultural fields and remote terrain. Solar power is a common energy source is wireless sensor nodes, however, it is not reliable due to fluctuations in power stemming from the changing seaso…
In this paper, we design an optimal sensor collaboration strategy among neighboring nodes while tracking a time-varying parameter using wireless sensor networks in the presence of imperfect communication channels. The sensor network is assumed to be self-powered, where sensors are equipped with energy harvesters that replenish energy from the environment. In order to minimize the mean square estimation error of parameter tracking, we propose an online sensor collaboration policy subject to real-time energy harvesting constraints. The proposed energy allocation strategy is computationally light…
Having a cognitive and self-optimizing network that proactively adapts not only to channel conditions, but also according to its users needs can be one of the highest forthcoming priorities of future 6G Heterogeneous Networks (HetNets). In this paper, we introduce an interdisciplinary approach linking the concepts of e-healthcare, priority, big data analytics (BDA) and radio resource optimization in a multi-tier 5G network. We employ three machine learning (ML) algorithms, namely, naive Bayesian (NB) classifier, logistic regression (LR), and decision tree (DT), working as an ensemble system to…
