Traditional Internet of Things (IoT) sensors rely on batteries that need to be replaced or recharged frequently which impedes their pervasive deployment. A promising alternative is to employ energy harvesters that convert the environmental energy into electrical energy. Kinetic Energy Harvesting (KEH) converts the ambient motion/vibration energy into electrical energy to power the IoT sensor nodes. However, most previous works employ KEH without dynamically tracking the optimal operating point of the transducer for maximum power output. In this paper, we systematically analyse the relation between the operating point of the transducer and the corresponding energy yield. To this end, we explore the voltage-current characteristics of the KEH transducer to find its Maximum Power Point (MPP). We show how this operating point can be approximated in a practical energy harvesting circuit. We design two hardware circuit prototypes to evaluate the performance of the proposed mechanism and analyse the harvested energy using a precise load shaker under a wide set of controlled conditions typically found in human-centric applications. We analyse the dynamic current-voltage characteristics and specify the relation between the MPP sampling rate and harvesting efficiency which outlines the need for dynamic MPP tracking. The results show that the proposed energy harvesting mechanism outperforms the conventional method in terms of generated power and offers at least one order of magnitude higher power than the latter.
Indoor beacon system is a cornerstone of internet of things. Until now, most of the research effort has focused on achieving various applications based on beacon communication. However, the power consumption on beacon devices becomes the bottleneck for the large-scale deployments of indoor networks. On one hand, the size of beacon devices is required to be small enough for easy deployment, which further limits the size of battery. On the other hand, replacing the batteries of the beacon devices could lead to high maintenance costs. It is important to provide them with full energy autonomy. To …
We study decentralized estimation of time-varying signals at a fusion center, when energy harvesting sensors transmit sampled data over rate-constrained links. We propose dynamic strategies to select radio parameters, sampling set, and harvested energy at each node, with the aim of estimating a time-varying signal while ensuring: i) accuracy of the recovery procedure, and ii) stability of the batteries around a prescribed operating level. The approach is based on stochastic optimization tools, which enable adaptive optimization without the need of apriori knowledge of the statistics of radio c…
The Internet of Things (IoT) has important applications in our daily lives including health and fitness tracking, environmental monitoring and transportation. However, sensor nodes in IoT suffer from the limited lifetime of batteries resulting from their finite energy availability. A promising solution is to harvest energy from environmental sources, such as solar, kinetic, thermal and radio frequency, for perpetual and continuous operation of IoT sensor nodes. In addition to energy generation, recently energy harvesters have been used for context detection, eliminating the need for additional…
Internet of things (IoT) is a revolutionizing technology which aims to create an ecosystem of connected objects and embedded devices and provide ubiquitous connectivity between trillions of not only smart devices but also simple sensors and actuators. Although recent advancements in miniaturization of devices with higher computational capabilities and ultra-low power communication technologies have enabled the vast deployment of sensors and actuators everywhere, such an evolution calls for fundamental changes in hardware design, software, network architecture, data analytic, data storage and p…
The sustainable Internet of Things (IoT) is becoming a promising solution for the green living and smart industries. In this article, we investigate the practical issues in the radio energy harvesting and data communication systems through extensive field experiments. A number of important characteristics of energy harvesting circuits and communication modules have been studied, including the non-linear energy consumption of the communication system relative to the transmission power, the wake-up time associated with the payload, and the varying system power during consecutive packet transmiss…
With the growing number of deployments of Internet of Things (IoT) infrastructure for a wide variety of applications, the battery maintenance has become a major limitation for the sustainability of such infrastructure. To overcome this problem, energy harvesting offers a viable alternative to autonomously power IoT devices, resulting in a number of battery-less energy harvesting IoTs (or EH-IoTs) appearing in the market in recent years. Standards activities are also underway, which involve wireless protocol design suitable for EH-IoTs as well as testing procedures for various energy harvesting…
The paper studies optimal sensor selection for source estimation in energy harvesting Internet of Things (IoT) networks. Specifically, the focus is on the selection of the sensor locations which minimizes the estimation error at a fusion center, and to optimally allocate power and bandwidth for each selected sensor subject to a prescribed spectral and energy budget. To do so, measurement accuracy, communication link quality, and the amount of energy harvested are all taken into account. The sensor selection is studied under both analog and digital transmission schemes from the selected sensors…
Internet of Things (IoT) systems in general consist of a lot of devices with massive connectivity. Those devices are usually constrained with limited energy supply and can only operate at low power and low rate. In this paper, we investigate a cellular-based IoT system combined with energy harvesting and NOMA. We consider all base stations (BS) and IoT devices follow the Poisson Point Process (PPP) distribution in a given area. The unit time slot is divided into two phases, energy harvesting phase in downlink (DL) and data transmission phase in uplink (uplink). That is, IoT devices will first …
Norwegian University of Science and Technology（挪威科技大学）；United States Naval Academy（美国海军学院）
Reinforcement learning (RL) is capable of managing wireless, energy-harvesting IoT nodes by solving the problem of autonomous management in non-stationary, resource-constrained settings. We show that the state-of-the-art policy-gradient approaches to RL are appropriate for the IoT domain and that they outperform previous approaches. Due to the ability to model continuous observation and action spaces, as well as improved function approximation capability, the new approaches are able to solve harder problems, permitting reward functions that are better aligned with the actual application goals.…
Advances in low-power electronics and machine learning techniques lead to many novel wearable IoT devices. These devices have limited battery capacity and computational power. Thus, energy harvesting from ambient sources is a promising solution to power these low-energy wearable devices. They need to manage the harvested energy optimally to achieve energy-neutral operation, which eliminates recharging requirements. Optimal energy management is a challenging task due to the dynamic nature of the harvested energy and the battery energy constraints of the target device. To address this challenge,…
University of Oulu（奥卢大学）；Linköping University（林雪平大学）
We consider an IoT sensing network with multiple users, multiple energy harvesting sensors, and a wireless edge node acting as a gateway between the users and sensors. The users request for updates about the value of physical processes, each of which is measured by one sensor. The edge node has a cache storage that stores the most recently received measurements from each sensor. Upon receiving a request, the edge node can either command the corresponding sensor to send a status update, or use the data in the cache. We aim to find the best action of the edge node to minimize the average long-te…
NarrowBand-Internet of Things (NB-IoT) is a new 3GPP radio access technology designed to provide better coverage for a massive number of low-throughput low-cost devices in delay-tolerant applications with low power consumption. To provide reliable connections with extended coverage, a repetition transmission scheme is introduced to NB-IoT during both Random Access CHannel (RACH) procedure and data transmission procedure. To avoid the difficulty in replacing the battery for IoT devices, the energy harvesting is considered as a promising solution to support energy sustainability in the NB-IoT ne…
Information freshness is crucial for time-critical IoT applications, e.g., monitoring and control systems. We consider an IoT status update system with multiple users, multiple energy harvesting sensors, and a wireless edge node. The users receive time-sensitive information about physical quantities, each measured by a sensor. Users send requests to the edge node where a cache contains the most recently received measurements from each sensor. To serve a request, the edge node either commands the sensor to send a status update or retrieves the aged measurement from the cache. We aim at finding …
Simultaneous wireless information and power transfer (SWIPT) has recently gathered much research interest from both academia and industry as a key enabler of energy harvesting Internet-of-things (IoT) networks. Due to a number of growing use cases of such networks, it is important to study their performance limits from the perspective of physical layer security (PLS). With this intent, this work aims to provide a novel analysis of the ergodic secrecy capacity of a SWIPT system is provided for Rician and Nakagami-m faded communication links. For a realistic evaluation of the system, the imperfe…
Energy harvesting (EH) is a promising technique to fulfill the long-term and self-sustainable operations for Internet of things (IoT) systems. In this paper, we study the joint access control and battery prediction problems in a small-cell IoT system including multiple EH user equipments (UEs) and one base station (BS) with limited uplink access channels. Each UE has a rechargeable battery with finite capacity. The system control is modeled as a Markov decision process without complete prior knowledge assumed at the BS, which also deals with large sizes in both state and action spaces. First, …
Conventional systems for motion context detection rely on batteries to provide the energy required for sampling a motion sensor. Batteries, however, have limited capacity and, once depleted, have to be replaced or recharged. Kinetic Energy Harvesting (KEH) allows to convert ambient motion and vibration into usable electricity and can enable batteryless, maintenance free operation of motion sensors. The signal from a KEH transducer correlates with the underlying motion and may thus directly be used for context detection, saving space, cost and energy by omitting the accelerometer. Previous work…
Considering ubiquitous connectivity and advanced information processing capability, huge amount of low-power IoT devices are deployed nowadays and the maintenance of those devices which includes firmware/software updates and recharging the units has become a bottleneck for IoT systems. For addressing limited battery constraints, wireless power transfer is a promising approach such that it does not require any physical link between energy harvester and power transfer. Furthermore, combining wireless power transfer with information transmission has become more appealing. In the systems that appl…
The ever-evolving internet of things (IoT) has led to the growth of numerous wireless sensors, communicating through the internet infrastructure. When designing a network using these sensors, one critical aspect is the longevity and self-sustainability of these devices. For extending the lifetime of these sensors, radio frequency energy harvesting (RFEH) technology has proved to be promising. In this paper, we propose CURE, a novel framework for RFEH that effectively combines the benefits of cell-free massive MIMO (CFmMIMO), unmanned aerial vehicles (UAVs), and reconfigurable intelligent surfa…
We consider a resource-constrained IoT network, where multiple users make on-demand requests to a cache-enabled edge node to send status updates about various random processes, each monitored by an energy harvesting sensor. The edge node serves users' requests by deciding whether to command the corresponding sensor to send a fresh status update or retrieve the most recently received measurement from the cache. Our objective is to find the best actions of the edge node to minimize the average age of information (AoI) of the received measurements upon request, i.e., average on-demand AoI, subjec…
Energy-constrained sensor nodes can adaptively optimize their energy consumption if a continuous measurement exists. This is of particular importance in scenarios of high dynamics such as energy harvesting or adaptive task scheduling. However, self-measuring of power consumption at reasonable cost and complexity is unavailable as a generic system service. In this paper, we present Eco, a hardware-software co-design enabling generic energy management on IoT nodes. Eco is tailored to devices with limited resources and thus targets most of the upcoming IoT scenarios. The proposed measurement modu…
The rapid growth of the so-called Internet of Things is expected to significantly expand and support the deployment of resource-limited devices. Therefore, intelligent scheduling protocols and technologies such as wireless power transfer, are important for the efficient implementation of these massive low-powered networks. This paper studies the performance of a wireless powered communication network, where multiple batteryless devices harvest radio-frequency from a dedicated transmitter in order to communicate with a common information receiver (IR). We investigate several novel selection sch…
We propose SmartON, a batteryless system that learns to wake up proactively at the right moment in order to detect events of interest. It does so by adapting the duty cycle to match the distribution of event arrival times under the constraints of harvested energy. While existing energy harvesting systems either wake up periodically at a fixed rate to sense and process the data, or wake up only in accordance with the availability of the energy source, SmartON employs a three-phase learning framework to learn the energy harvesting pattern as well as the pattern of events at run-time, and uses th…
Mobile edge computing (MEC) has recently become a prevailing technique to alleviate the intensive computation burden in Internet of Things (IoT) networks. However, the limited device battery capacity and stringent spectrum resource significantly restrict the data processing performance of MEC-enabled IoT networks. To address the two performance limitations, we consider in this paper an MEC-enabled IoT system with an energy harvesting (EH) wireless device (WD) which opportunistically accesses the licensed spectrum of an overlaid primary communication link for task offloading. We aim to maximize…
With the number of communicating sensors linked to the Internet of Things (IoT) ecosystem in-creasing dramatically, well-designed indoor light energy harvesting solutions are needed. The first step towards this development is to determine the harvestable energy in real indoor environ-ments. But the harvestable energy varying over time with nature (spectra) and intensity of the light multi-sources, lighting data must be collected for sufficiently long periods. Besides, for a real implementation on-site, studies must be able to be carried out simultaneously in several places to determine locatio…
Wireless power transmission (WPT) is expected to play an important role in the Internet of Things services by providing the perpetual operation of IoT sensors. However, to prolong the IoT network's lifetime, the efficient resource allocation algorithm is required, in particular, the energy fairness issue among IoT sensors has been a critical challenge of the WPT system. In this paper, considering energy fairness as the minimum received energy of all energy poverty IoT sensors (EPISs), we allocate orthogonal frequency bands to several EPISs and transfer the RF power on each orthogonal band, usi…
Outage Analysis of Backscatter-Based Ambient IoT Device Classes with Energy Buffering
Brunel University London（布鲁内尔伦敦大学）；University of New South Wales（新南威尔士大学）；Aalto University（阿尔托大学）；Southwest Jiaotong University（西南交通大学）；National Institute of Technology Calicut（卡利卡特国家技术学院）
There is an increasing demand for intelligent processing on emerging ultra-low-power internet of things (IoT) devices, and recent works have shown substantial efficiency boosts by executing inference tasks directly on the IoT device (node) rather than merely transmitting sensor data. However, the computation and power demands of Deep Neural Network (DNN)-based inference pose significant challenges for nodes in an energy-harvesting wireless sensor network (EH-WSN). Moreover, these tasks often require responses from multiple physically distributed EH sensor nodes, which imposes crucial system op…
To sustain communication reliability and use the harvested energy effectively, it is crucial to consider energy sharing between energy harvesting tags (EHT) in a multiple access network, which are basic building blocks for the internet of things (IoT) applications. This technique also achieves higher throughput compared with the non-cooperative strategies despite energy losses occurred during energy transfer. We propose an energy cooperative communication strategy for a multiple access network of tags that depends on the harvested battery energy. We develop an optimal transmission policy for E…
This paper proposes and investigates an overlay spectrum sharing system in conjunction with the simultaneous wireless information and power transfer (SWIPT) to enable communications for the Internet of Things (IoT) applications. Considered is a cooperative cognitive radio network, where two IoT devices (IoDs) exchange their information and also provide relay assistance to a pair of primary users (PUs). Different from most existing works, in this paper, both IoDs can harvest energy from the radio-frequency (RF) signals received from the PUs. By utilizing the harvested energy, they provide relay…
Age of information (AoI) is one of the key performance metrics for Internet of things (IoT) systems. Timely status updates are essential for many IoT applications; however, they are subject to strict constraints related on the available energy and unreliability of underlying information sources. Hence, the scheduling of status updates must be carefully planned to preserve energy, but at the same time, it may happen that when a status update is needed, there is no reliable up-to-date information content to refresh. As a solution to overcome these unpredictabilities, one can employ multiple sour…
In this article, we introduce a novel deception strategy which is inspired by the "Borrowing Arrows with Thatched Boats", one of the most famous military tactics in the history, in order to defeat reactive jamming attacks for low-power IoT networks. Our proposed strategy allows resource-constrained IoT devices to be able to defeat powerful reactive jammers by leveraging their own jamming signals. More specifically, by stimulating the jammer to attack the channel through transmitting fake transmissions, the IoT system can not only undermine the jammer's power, but also harvest energy or utilize…
Chongqing University of Posts and Telecommunications（重庆邮电大学）；Anqing Normal University（安庆师范大学）；Nanyang Technological University（南洋理工大学）
The combination of energy harvesting (EH), cognitive radio (CR), and non-orthogonal multiple access (NOMA) is a promising solution to improve energy efficiency and spectral efficiency of the upcoming beyond fifth generation network (B5G), especially for support the wireless sensor communications in Internet of things (IoT) system. However, how to realize intelligent frequency, time, and energy resource allocation to support better performances is an important problem to be solved. In this paper, we study joint spectrum, energy, and time resource management for the EH-CR-NOMA IoT systems. Our g…
