Spatial modes of light provide a high-dimensional space that can be used to encode both classical and quantum information. Current approaches for dynamically generating and measuring these modes are slow, due to the need to reconfigure a high-resolution phase mask such as a spatial light modulator or digital micromirror device. The process of updating the spatial mode of light can be greatly accelerated by multiplexing a set of static phase masks with a fast, image-preserving optical switch, such as an acousto-optic modulator (AOM). We experimentally realize this approach, using a double-pass AOM to generate one of five orbital angular momentum states with a switching rate of up to 500 kHz. We then apply this system to perform fast quantum state tomography of spatial modes of light in a 2-dimensional Hilbert space, by projecting the unknown state onto six spatial modes comprising three mutually unbiased bases. We are able to reconstruct arbitrary states in under 1 ms with an average fidelity of 96.9%.
High-speed spatial light modulators (SLM) are crucial components for free-space communication and structured illumination imaging. Current approaches for dynamical spatial mode generation, such as liquid crystal SLMs or digital micromirror devices, are limited to a maximum pattern refresh rate of 10 kHz and have a low damage threshold. We demonstrate that arbitrary spatial profiles in a laser pulse can be generated by mapping the temporal radio-frequency (RF) waveform sent to an acousto-optic modulator (AOM) onto the optical field. We find that the fidelity of the SLM performance can be improv…
Frequency modulation of a continuous wave laser source enables generation of photons at multiple frequencies from a single pump laser. Such multiple closely spaced laser lines are important for high data rate QAM in dense-WDM networks. In this paper we present a monolithic silicon acousto-optic frequency modulator (AOFM) operating at 1.09GHz. We demonstrate frequency modulation of a 1564nm wavelength pump laser, resulting in generation of sideband laser lines spaced by 0.009nm.
To achieve a distributed reflectivity measurement along an optical fiber, we develop a simplified cost-effective configuration of optical correlation- (or coherence-) domain reflectometry based on a synthesized optical coherence function by sinusoidal modulation. By excluding conventional optical heterodyne detection (practically, without using an acousto-optic modulator) and by exploiting the foot of the Fresnel reflection spectrum, the electrical bandwidth required for signal processing is lowered down to several megahertz. We evaluate the basic system performance and demonstrate its high-sp…
Non-reciprocal components are essential in photonic systems for protecting light sources and for signal routing functions. Acousto-optic methods to produce non-reciprocal devices offer a foundry-compatible alternative to magneto-optic solutions and are especially important for photonic integration. In this paper, we experimentally demonstrate a dynamically reconfigurable non-reciprocal acousto-optic modulator at telecom wavelength. The modulator can be arranged in a multitude of reciprocal and non-reciprocal configurations by means of an external RF input. The dynamic reconfigurability of the …
We report the design and characterization of high frequency, resonant acousto-optic modulators (AOM) in a MEMS foundry process. The doubly-resonant cavity design, with short ($L{\sim}10.5\, μm$) acoustic and optical cavity lengths, allows us to measure acousto-optic modulation at GHz frequencies with high modulation efficiency. In contrast to traditional AOMs, these devices rely on the perturbation induced by the displacement of cavity boundaries, which can be significantly enhanced in a suspended geometry. This platform can serve as the building block for fast 2D spatial light modulators (SLM…
Emerging technologies based on tailorable interactions between photons and phonons promise new capabilities ranging from high-fidelity microwave signal processing to non-reciprocal optics and quantum state control. While such light-sound couplings have been studied in a variety of physical systems, many implementations rely on non-standard materials and fabrication schemes that are challenging to co-implement with standard integrated photonic circuitry. Notably, despite significant advances in integrated electro-optic modulators, related acousto-optic modulator concepts have remained relativel…
We report on a scheme to improve the pointing stability of the first order beam diffracted by an acousto-optic modulator (AOM). Due to thermal effects inside the crystal, the angular position of the beam can change by as much as 1 mrad when the radio-frequency power in the AOM is reduced to decrease the first order beam intensity. This is done for example to perform forced evaporative cooling in ultracold atom experiments using far-off-resonant optical traps. We solve this problem by driving the AOM with two radio-frequencies $f_1$ and $f_2$. The power of $f_2$ is adjusted relative to the powe…
We demonstrate a collinear acousto-optic modulator in a suspended film of lithium niobate employing a high-confinement, wavelength-scale waveguide. By strongly confining the optical and mechanical waves, this modulator improves by orders of magnitude a figure-of-merit that accounts for both acousto-optic and electro-mechanical efficiency. Our device demonstration marks a significant technological advance in acousto-optics that promises a novel class of compact and low-power frequency shifters, tunable filters, non-magnetic isolators, and beam deflectors.
Push-Pull acousto-optic modulator based on non-suspended thin-film lithium niobate on silicon substrate
Elmore Family School of Electrical and Computer Engineering, Purdue University（普渡大学埃尔莫电气与计算机工程学院）；Department of Electrical and Computer Engineering, University of Michigan（密歇根大学电气与计算机工程系）
A highly efficient on-chip acousto-optic modulator, as a key component, occupies an exceptional position in microwave-to-optical conversion. Homogeneous thin-film lithium niobate is preferentially employed to build the suspended configuration forming the acoustic resonant cavity to improve the modulation efficiency of the device. However, the limited cavity length and complex fabrication recipe of the suspended prototype restrain further breakthrough in the modulation efficiency and impose challenges for waveguide fabrication. In this work, based on a nonsuspended thin-film lithium niobate-cha…
The stabilization of lasers to absolute frequency references is a fundamental requirement in several areas of atomic, molecular and optical physics. A range of techniques are available to produce a suitable reference onto which one can 'lock' the laser, many of which depend on the specific internal structure of the reference or are sensitive to laser intensity noise. We present a novel method using the frequency modulation of an acousto-optic modulator's carrier (drive) signal to generate two spatially separated beams, with a frequency difference of only a few MHz. These beams are used to prob…
Diffraction beams generated by an acousto-optic modulator (AOM) are widely used in various optical experiments, some of which require high angular stability with the temporal modulation of optical power. Usually, it is difficult to realize both angular stability and high-power modulation in a passive setup without a servo system of radio-frequency compensation. Here, we present a method to suppress the angular drift and pointing noise only with the thermal management of the AOM crystal. We analyze the dependence of the angular drift on the refractive index variation, and find that the angular …
We demonstrate acousto-optic phase modulators in X-cut lithium niobate films on sapphire, detailing the dependence of the piezoelectric and optomechanical coupling coefficients on the crystal orientation. This new platform supports highly confined, strongly piezoelectric mechanical waves without suspensions, making it a promising candidate for broadband and efficient integrated acousto-optic devices, circuits, and systems.
Optical computing with integrated photonics brings a pivotal paradigm shift to data-intensive computing technologies. However, the scaling of on-chip photonic architectures using spatially distributed schemes faces the challenge imposed by the fundamental limit of integration density. Synthetic dimensions of light offer the opportunity to extend the length of operand vectors within a single photonic component. Here, we show that large-scale, complex-valued matrix-vector multiplications on synthetic frequency lattices can be performed using an ultra-efficient, silicon-based nanophotonic cavity …
We exercise rapid and fine control over the phase of light by transferring digitally gen- erated phase jumps from radio frequency (rf) electrical signals onto light by means of acousto-optic interaction. By tailoring the statistics of phase jumps in the electrical signal and thereby engineering the optical phase noise, we manipulate the visibil- ity of interference fringes in a Mach-Zehnder interferometer that incorporates two acousto-optic modulators. Such controlled dephasing finds applications in modern experiments involving the spread or diffusion of light in an optical network. Further, w…
Electrically driven acousto-optic devices that provide beam deflection and optical frequency shifting have broad applications from pulse synthesis to heterodyne detection. Commercially available acousto-optic modulators are based on bulk materials and consume Watts of radio frequency power. Here, we demonstrate an integrated 3-GHz acousto-optic frequency shifter on thin-film lithium niobate, featuring a carrier suppression over 30 dB. Further, we demonstrate a gigahertz-spaced optical frequency comb featuring more than 200 lines over a 0.6-THz optical bandwidth by recirculating the light in an…
Candidate overtone shear horizontal SAW resonators in thin-film lithium niobate for intermodal acousto-optic modulation
Wangzhijiang Innovation Center for Laser, Aerospace Laser Technology and System Department, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences（中国科学院上海光学精密机械研究所）；Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences（中国科学院大学物质科学与光电技术研究院）；School of Information Science and Technology, ShanghaiTech University（上海科技大学信息科学与技术学院）
We propose theory for reversible quantum transducer connecting superconducting qubits and optical photons using acoustic waves in piezoelectrics. The proposed device consists of integrated acousto-optic resonator that utilizes stimulated Brillouin scattering for phonon-photon conversion, and piezoelectric effect for coupling of phonons to qubits. We evaluate the phonon-photon coupling rate, and show that the required power of optical pump as well as the other device parameters providing full and faithful quantum conversion are feasible for implementation with the state of the art integrated ac…
Many optical systems use acousto-optics for fast steering of light. However, acousto-optic (AO) light diffraction permits manipulation and shaping of light fields in a much broader sense including holography. While acousto-optic devices operate at incontestable speed, they are one dimensional (1D) diffraction devices depending on analog serial data transfer and as such have a mode of use distinguished from common 2D spatial light modulators. Combination with an amplified laser source allows to clock the serial buildup of AO diffraction patterns for avoidance of phase aberration in the output b…
Light-sound interactions have long been exploited in various acousto-optic devices based on bulk crystalline materials. Conventionally these devices operate in megahertz frequency range where the acoustic wavelength is much longer than the optical wavelength and a long interaction length is required to attain significant coupling. With nanoscale transducers, acoustic waves with sub-optical wavelengths can now be excited to induce strong acousto-optic coupling in nanophotonic devices. Here we demonstrate microwave frequency surface acoustic wave transducers co-integrated with nanophotonic reson…
Acousto-optic interactions involving propagating phonons can break the time-reversal and frequency-modulation symmetry of light. However, conventional acousto-optic modulators based on bulk materials have frequency bandwidth limited to hundreds of megahertz due to their large structural sizes. Here, we experimentally demonstrate gigahertz single-sideband acousto-optic modulation on an etchless lithium niobate integrated platform by using photonic bound states in the continuum. The upper- or lower-sideband modulation of light can be obtained conveniently by choosing specific combinations of inp…
We propose a tomographic method to reconstruct the optical properties of a highly-scattering medium from incoherent acousto-optic measurements. The method is based on the solution to an inverse problem for the diffusion equation and makes use of the principle of interior control of boundary measurements by an external wave field.
Integrating nanoscale electromechanical transducers and nanophotonic devices potentially can enable new acousto-optic devices to reach unprecedented high frequencies and modulation efficiency. Here, we demonstrate acousto-optic modulation of a photonic crystal nanocavity using Lamb waves with frequency up to 19 GHz, reaching the microwave K band. The devices are fabricated in suspended aluminum nitride membrane. Excitation of acoustic waves is achieved with interdigital transducers with periods as small as 300 nm. Confining both acoustic wave and optical wave within the thickness of the membra…
We propose an original adaptive wavefront holographic setup based on the photorefractive effect (PR), to make real-time measurements of acousto-optic signals in thick scattering media, with a high flux collection at high rates for breast tumor detection. We describe here our present state of art and understanding on the problem of breast imaging with PR detection of the acousto-optic signal.
Acousto-optical coherence tomography (AOCT) consists in using random phase jumps on ultrasound and light to achieve a millimeter resolution when imaging thick scattering media. We combined this technique with heterodyne off-axis digital holography. Two-dimensional images of absorbing objects embedded in scattering phantoms are obtained with a good signal-to-noise ratio. We study the impact of the phase modulation characteristics on the amplitude of the acousto-optic signal and on the contrast and apparent size of the absorbing inclusion.
Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are becoming indispensable. The recent realization that two-dimensional layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this review, we cover the state-of-the-art of optical modulators based on two-dimensional layered materials including …
We consider an all in-fiber optical modulator based on a ring resonator configuration. The case of adiabatic to nonadiabatic transition is considered, where the geometrical (Berry) phase acquired in a round trip along the ring changes abruptly by pi. Degradation of the responsivity of the modulator due to finite linewidth of the optical input is discussed. We show that the responsivity of the proposed modulator can be significantly enhanced with optimum design and compare with other configurations.
We present a photon noise and diffraction limited imaging method combining the imaging laser and ultrasonic waves. The laser optical feedback imaging (LOFI) technique is an ultrasensitive imaging method for imaging objects through or embedded within a scattering medium. However, LOFI performances are dramatically limited by parasitic optical feedback occurring in the experimental setup. In this work, we have tagged the ballistic photons by an acousto-optic effect in order to filter the parasitic feedback effect and to reach the theoretical and ultimate sensitivity of the LOFI technique. We pre…
We report high-energy mid-infrared pulse generation by Q-switching of dysprosium-doped fiber lasers for the first time. Two different modulation techniques are demonstrated. Firstly, using active acousto-optic modulation, pulses are produced with up to 12 μJ energy and durations as short as 270 ns, with variable repetition rates from 100 Hz to 20 kHz and central wavelengths tunable from 2.97 to 3.23 μm. Experiments are supported by numerical modeling, identifying routes for improved pulse energies and to avoid multi-pulsing by careful choice of modulator parameters. Secondly, we demonstrate pa…
We present a rigorous procedure for evaluating the photoelastic coefficients of a layered medium where the periodicity is smaller than the wavelengths of all optical and acoustic fields. Analytical expressions are given for the coefficients of a composite material comprising thin layers of optically isotropic materials. These coefficients include artificial contributions that are unique to structured media and arise from the optical and mechanical contrast between the constituents. Using numerical examples, we demonstrate that the acousto-optic properties of layered structures can be enhanced …
Acousto-optical devices, such as modulators, filters or deflectors, implement a simple and effective way of light modulation and signal processing techniques. However, their operation wavelengths are restricted to visible and near-infrared frequency region due to a quadratic decrease of the efficiency of acousto-optical interaction with the wavelength increase. At the same time, almost all materials with high value of acousto-optic figure of merit are non-transparent at wavelengths larger than 5 μm, while the transparent materials possess significantly lower acousto-optic figure of merit. Here…
Acousto-Optical Coherence Tomography (AOCT) is a variant of Acousto Optic Imaging (also called Ultrasound modulated Optical Tomography) that makes possible to get resolution along the ultrasound propagation axis $z$. We present here new AOCT experimental results, and we study how the $z$ resolution depends on time step between phase jumps $T_ϕ$, or on the correlation length $Δz$. By working at low resolution, we perform a quantitative comparison of the $z$ measurements with the theoretical Point Spread Function (PSF). We present also images recorded with different $z$ resolution, and we qualit…
We propose and characterize experimentally a new source of optical frequency combs for performing multi-heterodyne spectrometry. This comb modality is based on a frequency shifting loop seeded with a CW monochromatic laser. The comb lines are generated by successive passes of the CW laser through an acousto-optic frequency shifter. We report the generation of frequency combs with more than 1500 mutually coherent lines, without resorting to non-linear broadening phenomena or external electronic modulation. The comb line spacing is easily reconfigurable from tens of MHz down to the kHz region. W…
Acousto-Optical Coherence Tomography (AOCT) is variant of Acousto Optic Imaging (called also ultrasonic modulation imaging) that makes possible to get z resolution with acoustic and optic Continuous Wave (CW) beams. We describe here theoretically the AOCT e ect, and we show that the Acousto Optic tagged photons remains coherent if they are generated within a speci c z region of the sample. We quantify the z selectivity for both the tagged photon eld, and for the M. Lesa re et al. photorefractive signal.
We propose a strategy for quantitative photoacoustic mapping of chromophore concentrations that can be performed purely experimentally. We exploit the possibility of acousto-optic modulation using focused ultrasound, and the principle that photons follow trajectories through a turbid medium in two directions with equal probability. A theory is presented that expresses the local absorption coefficient inside a medium in terms of noninvasively measured quantities and experimental parameters. Proof of the validity of the theory is given with Monte Carlo simulations.
We consider the acousto-optic effect in a random medium. We derive the radiative transport equations that describe the propagation of multiply-scattered light in a medium whose dielectric permittivity is modulated by an acoustic wave. Using this result, we present an analysis of the sensitivity of an acousto-optic measurement to the presence of a small absorbing inhomogeneity.
High-Efficiency Acousto-Optic Modulation on Non-Suspended Thin-Film Lithium Tantalate
University of Science and Technology of China（中国科学技术大学）；Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences（中国科学院上海微系统信息技术研究所）；University of Chinese Academy of Sciences（中国科学院大学）
We present a laser beam shaping method using acousto-optic deflection of light and discuss its application to dipole trapping of ultracold atoms. By driving the acousto-optic deflector with multiple frequencies, we generate an array of overlapping diffraction-limited beams that combine to form an arbitrary-shaped smooth and continuous trapping potential. Confinement of atoms in a flat-bottomed potential formed by a laser beam with uniform intensity over its central region confers numerous advantages over the harmonic confinement intrinsic to Gaussian beam dipole traps and many other trapping s…
Studying the internal structure of complex samples with light is an important task, but a difficult challenge due to light scattering. While the complex optical distortions induced by multiple scattering can be effectively undone with the knowledge of the medium's scattering-matrix, this matrix is generally unknown, and cannot be measured with high resolution without the presence of fluorescent or absorbing probes at all points of interest. To overcome these limitations, we introduce here the concept of the acousto-optic transmission matrix (AOTM). Taking advantage of the near scattering-free …
We analyze the coupling of atoms or atom-like emitters to nanophotonic waveguides in the presence of propagating acoustic waves. Specifically, we show that strong index modulations induced by such waves can drastically modify the effective photonic density of states and thereby influence the strength, the directionality, as well as the overall characteristics of photon emission and absorption processes. These effects enable a complete dynamical control of light-matter interactions in waveguide structures, which even in a two dimensional system can be used to efficiently exchange individual pho…
Acousto-optic tomography (AOT) enables optical-contrast imaging deep inside scattering samples via localized ultrasound modulation of scattered light. However, the resolution of AOT is inherently limited by the ultrasound focus size, prohibiting microscopic investigations. In the last few years, advances in the field of digital wavefront-shaping have allowed the development of novel approaches for overcoming the acoustic resolution limit of AOT. However, these novel approaches require the execution of thousands of wavefront measurements within the sample speckle decorrelation time, limiting th…
