在离散Boltzmann方法(DBM)的框架下,提出了一种新的多相流动力学模型。与以往的DBM方法不同,该模型采用了自底向上的方法。采用Enskog碰撞模型描述了分子大小和排斥势的影响,通过平均场近似方法得到了吸引势。直接引入了导致非理想状态方程和表面张力的分子间相互作用作为外力项。对库埃特流、两相共存曲线、拉普拉斯定律、相分离、液滴碰撞等典型的基准问题进行了数值模拟,验证了模型的正确性。特别地,对于两种液滴碰撞,比较研究了由$(f - f ^{eq})$的二阶和三阶非守恒动力学矩定义的两种非平衡效应$\bar{D}_2^*$和$\bar{D}_3^*$的强度,其中$f$($f^{eq}$)为平衡分布函数.有趣的是发现在碰撞过程中,$\bar{D}_2^*$总是明显大于$\bar{D}_3^*$,$\bar{D}_2^*$可以用来识别碰撞过程的不同阶段,区分不同类型的碰撞。对于非平衡效应较强、粘性应力的线性本构关系不再成立的情况,该建模方法可直接推广到高阶模型。
英文摘要:
A new kinetic model for multiphase flow was presented under the framework of the discrete Boltzmann method (DBM). Significantly different from the previous DBM, a bottom-up approach was adopted in this model. The effects of molecular size and repulsion potential were described by the Enskog collision model; the attraction potential was obtained through the mean-field approximation method. The molecular interactions, which result in the non-ideal equation of state and surface tension, were directly introduced as an external force term. Several typical benchmark problems, including Couette flow, two-phase coexistence curve, the Laplace law, phase separation, and the collision of two droplets, were simulated to verify the model. Especially, for two types of droplet collisions, the strengths of two non-equilibrium effects, $\bar{D}_2^*$ and $\bar{D}_3^*$, defined through the second and third order non-conserved kinetic moments of $(f - f ^{eq})$, are comparatively investigated, where $f$ ($f^{eq}$) is the (equilibrium) distribution function. It is interesting to find that during the collision process, $\bar{D}_2^*$ is always significantly larger than $\bar{D}_3^*$, $\bar{D}_2^*$ can be used to identify the different stages of the collision process and to distinguish different types of collisions. The modeling method can be directly extended to a higher-order model for the case where the non-equilibrium effect is strong, and the linear constitutive law of viscous stress is no longer valid.
An efficient three-dimensional multiple-relaxation-time lattice Boltzmann model for multiphase flows
本文提出了一种适用于多相流模拟的具有多重弛豫时间碰撞算子的三维格子Boltzmann模型。这个模型是我们以前的二维模型(H。梁湾,澳-地C.施,Z. L. Guo和Z. H. Chai,Phys. Rev. E. 89,053320(2014))到三维,使用用于Chan-Hilliard方程(CHE)的D3 Q7(三维中的七个离散速度)晶格和用于纳维-斯托克斯方程(NSE)的D3 Q15晶格。由于采用了较小的网格速度数,在模拟真实三维流动时,计算效率得到了显著提高,同时通过chapman-Enskog过程,该模型能够正确地恢复到CHE和NSE。通过两个基准界面跟踪问题,将本文提出的MRT模型与单弛豫时间模型和三维LB模型进行了比较,数值结果表明,本文提出的MRT模型在界面捕捉的精度和稳定性方面都有了显著的提高.所开发的模型也能够处理具有非常低的粘度的多相流体,由于使用的MRT碰撞模型,这是通过模拟在不同的雷诺数的经典瑞利-泰勒不稳定性证明。在这项工作中考虑的最大雷诺数达到$4000$,这是大于那些几乎以前的模拟。研究发现,在高雷诺数下,不稳定性导致界面结构更加复杂。
Effect of the forcing term in the pseudopotential lattice Boltzmann modeling of thermal flows
赝势格子Boltzmann(LB)模型是LB界中用于模拟多相流的流行模型。近年来,基于赝势LB模型和双分布函数LB方法,提出了几种热LB模型来模拟热多相流[G. Házi和A. Márkus,Phys.Rev.E77,026305(2008); L. Biferale等人,物理修订版信函108,104502(2012); S. Gong和P. Cheng,Int. J. Heat Mass Transfer 55,4923(2012)]。本文的目的是表明,在热流的赝势LB模拟中,必须消除强迫项对温度方程的影响。首先,通过Chapman-Enskog分析显示了强迫项对温度方程的影响。为了比较,提供了不受强迫项影响的替代治疗。随后,数值研究进行了两个基准测试。数值结果清楚地表明,强迫项效应的存在将导致显着的数值误差的赝势LB模型的热流。