Computational Cannula Microscopy (CCM) is a high-resolution widefield fluorescence imaging approach deep inside tissue, which is minimally invasive. Rather than using conventional lenses, a surgical cannula acts as a lightpipe for both excitation and fluorescence emission, where computational methods are used for image visualization. Here, we enhance CCM with artificial neural networks to enable 3D imaging of cultured neurons and fluorescent beads, the latter inside a volumetric phantom. We experimentally demonstrate transverse resolution of ~6um, field of view ~200um and axial sectioning of ~50um for depths down to ~700um, all achieved with computation time of ~3ms/frame on a laptop computer.
Computational Cannula Microscopy is a minimally invasive imaging technique that can enable high-resolution imaging deep inside tissue. Here, we apply artificial neural networks to enable fast, power-efficient image reconstructions that are more efficiently scalable to larger fields of view. Specifically, we demonstrate widefield fluorescence microscopy of cultured neurons and fluorescent beads with field of view of 200$μ$m (diameter) and resolution of less than 10$μ$m using a cannula of diameter of only 220$μ$m. In addition, we show that this approach can also be extended to macro-photography.
Fluorescence lifetime imaging microscopy (FLIM) is an important technique to understand the chemical micro-environment in cells and tissues since it provides additional contrast compared to conventional fluorescence imaging. When two fluorophores within a diffraction limit are excited, the resulting emission leads to non-linear spatial distortion and localization effects in intensity (magnitude) and lifetime (phase) components. To address this issue, in this work, we provide a theoretical model for convolution in FLIM to describe how the resulting behavior differs from conventional fluorescenc…
Fluorescence microscopy has enabled a dramatic development in modern biology. Due to its inherently weak signal, fluorescence microscopy is not only much noisier than photography, but also presented with Poisson-Gaussian noise where Poisson noise, or shot noise, is the dominating noise source. To get clean fluorescence microscopy images, it is highly desirable to have effective denoising algorithms and datasets that are specifically designed to denoise fluorescence microscopy images. While such algorithms exist, no such datasets are available. In this paper, we fill this gap by constructing a …
Compressed sensing fluorescence microscopy (CS-FM) proposes a scheme whereby less measurements are collected during sensing and reconstruction is performed to recover the image. Much work has gone into optimizing the sensing and reconstruction portions separately. We propose a method of jointly optimizing both sensing and reconstruction end-to-end under a total measurement constraint, enabling learning of the optimal sensing scheme concurrently with the parameters of a neural network-based reconstruction network. We train our model on a rich dataset of confocal, two-photon, and wide-field micr…
Purdue University（普渡大学）；Indiana University-Purdue University Indianapolis（印第安纳大学-普渡大学印第安纳波利斯分校）；Indiana University（印第安纳大学）
Fluorescence microscopy is an essential tool for the analysis of 3D subcellular structures in tissue. An important step in the characterization of tissue involves nuclei segmentation. In this paper, a two-stage method for segmentation of nuclei using convolutional neural networks (CNNs) is described. In particular, since creating labeled volumes manually for training purposes is not practical due to the size and complexity of the 3D data sets, the paper describes a method for generating synthetic microscopy volumes based on a spatially constrained cycle-consistent adversarial network. The prop…
Czech Academy of Sciences（捷克科学院）；Institute of Information Theory and Automation（信息理论与自动化研究所）；Washington University in St. Louis（圣路易斯华盛顿大学）；Washington University School of Medicine（华盛顿大学医学院）
Three-dimensional fluorescence microscopy often suffers from anisotropy, where the resolution along the axial direction is lower than that within the lateral imaging plane. We address this issue by presenting Dual-Cycle, a new framework for joint deconvolution and fusion of dual-view fluorescence images. Inspired by the recent Neuroclear method, Dual-Cycle is designed as a cycle-consistent generative network trained in a self-supervised fashion by combining a dual-view generator and prior-guided degradation model. We validate Dual-Cycle on both synthetic and real data showing its state-of-the-…
The trade-off between throughput and image quality is an inherent challenge in microscopy. To improve throughput, compressive imaging under-samples image signals; the images are then computationally reconstructed by solving a regularized inverse problem. Compared to traditional regularizers, Deep Learning based methods have achieved greater success in compression and image quality. However, the information loss in the acquisition process sets the compression bounds. Further improvement in compression, without compromising the reconstruction quality is thus a challenge. In this work, we propose…
Fluorescence lifetime imaging microscopy (FLIM) is a powerful technique in biomedical research that uses the fluorophore decay rate to provide additional contrast in fluorescence microscopy. However, at present, the calculation, analysis, and interpretation of FLIM is a complex, slow, and computationally expensive process. Machine learning (ML) techniques are well suited to extract and interpret measurements from multi-dimensional FLIM data sets with substantial improvement in speed over conventional methods. In this topical review, we first discuss the basics of FILM and ML. Second, we provid…
University of Michigan-Shanghai Jiao Tong University Joint Institute（上海交通大学密西根学院）；Shanghai Jiao Tong University（上海交通大学）
Fluorescence microscopy plays an important role in biomedical research. The depth-variant point spread function (PSF) of a fluorescence microscope produces low-quality images especially in the out-of-focus regions of thick specimens. Traditional deconvolution to restore the out-of-focus images is usually insufficient since a depth-invariant PSF is assumed. This article aims at handling fluorescence microscopy images by learning-based depth-variant PSF and reducing artifacts. We propose adaptive weighting depth-variant deconvolution (AWDVD) with defocus level prediction convolutional neural net…
Fluorescence fluctuations-based super-resolution microscopy (FF-SRM) is an emerging field promising low-cost and live-cell compatible imaging beyond the resolution of conventional optical microscopy. A comprehensive overview on how the nature of fluctuations, label density, out-of-focus light, sub-cellular dynamics, and the sample itself influence the reconstruction in FF-SRM is crucial to design appropriate biological experiments. We have experimentally compared several of the recently developed FF-SRM techniques (namely ESI, bSOFI, SRRF, SACD, MUSICAL and HAWK) on widefield fluorescence imag…
Fluorescence microscopy has become a widely used tool for studying various biological structures of in vivo tissue or cells. However, quantitative analysis of these biological structures remains a challenge due to their complexity which is exacerbated by distortions caused by lens aberrations and light scattering. Moreover, manual quantification of such image volumes is an intractable and error-prone process, making the need for automated image analysis methods crucial. This paper describes a segmentation method for tubular structures in fluorescence microscopy images using convolutional neura…
Robust and accurate nuclei centroid detection is important for the understanding of biological structures in fluorescence microscopy images. Existing automated nuclei localization methods face three main challenges: (1) Most of object detection methods work only on 2D images and are difficult to extend to 3D volumes; (2) Segmentation-based models can be used on 3D volumes but it is computational expensive for large microscopy volumes and they have difficulty distinguishing different instances of objects; (3) Hand annotated ground truth is limited for 3D microscopy volumes. To address these iss…
Colocalization is a powerful tool to study the interactions between fluorescently labeled molecules in biological fluorescence microscopy. However, existing techniques for colocalization analysis have not undergone continued development especially in regards to robust statistical support. In this paper, we examine two of the most popular quantification techniques for colocalization and argue that they could be improved upon using ideas from nonparametric statistics and scan statistics. In particular, we propose a new colocalization metric that is robust, easily implementable, and optimal in a …
University of Bologna（博洛尼亚大学）；University of Tor Vergata（罗马第二大学）
In fluorescence microscopy, Single Molecule Localization Microscopy (SMLM) techniques aim at localizing with high precision high density fluorescent molecules by stochastically activating and imaging small subsets of blinking emitters. Super Resolution (SR) plays an important role in this field since it allows to go beyond the intrinsic light diffraction limit. In this work, we propose a deep learning-based algorithm for precise molecule localization of high density frames acquired by SMLM techniques whose $\ell_{2}$-based loss function is regularized by positivity and $\ell_{0}$-based constra…
FluoCLIP: Stain-Aware Focus Quality Assessment in Fluorescence Microscopy
Division of AI and Software, Ewha Womans University（梨花女子大学人工智能与软件学部）；Bioimaging Data Curation Center (BDCC), Department of Life Science, Ewha Womans University（梨花女子大学生命科学系生物成像数据管理中心）；Analytical Solution Team, Daesang Corporation（大象集团分析解决方案团队）
Advances in fluorescence microscopy enable acquisition of 3D image volumes with better image quality and deeper penetration into tissue. Segmentation is a required step to characterize and analyze biological structures in the images and recent 3D segmentation using deep learning has achieved promising results. One issue is that deep learning techniques require a large set of groundtruth data which is impractical to annotate manually for large 3D microscopy volumes. This paper describes a 3D deep learning nuclei segmentation method using synthetic 3D volumes for training. A set of synthetic vol…
ICube - UMR7357, CNRS（法国国家科学研究中心ICube实验室（UMR7357））；University of Strasbourg（斯特拉斯堡大学）；Centriole Lab（中心粒实验室）；Department of Molecular and Cellular Biology, University of Geneva（日内瓦大学分子与细胞生物学系）
Single particle reconstruction has recently emerged in 3D fluorescence microscopy as a powerful technique to improve the axial resolution and the degree of fluorescent labeling. It is based on the reconstruction of an average volume of a biological particle from the acquisition multiple views with unknown poses. Current methods are limited either by template bias, restriction to 2D data, high computational cost or a lack of robustness to low fluorescent labeling. In this work, we propose a single particle reconstruction method dedicated to convolutional models in 3D fluorescence microscopy tha…
Multiple stains are usually used to highlight biological substances in biomedical image analysis. To decompose multiple stains for co-localization quantification, blind source separation is usually performed. Prior model-based stain separation methods usually rely on stains' spatial distributions over an image and may fail to solve the co-localization problem. With the advantage of machine learning, deep generative models are used for this purpose. Since prior knowledge of imaging models is ignored in purely data-driven solutions, these methods may be sub-optimal. In this study, a novel learni…
This paper introduces a new method of data-driven microscope design for virtual fluorescence microscopy. Our results show that by including a model of illumination within the first layers of a deep convolutional neural network, it is possible to learn task-specific LED patterns that substantially improve the ability to infer fluorescence image information from unstained transmission microscopy images. We validated our method on two different experimental setups, with different magnifications and different sample types, to show a consistent improvement in performance as compared to conventional…
Fluorescence microscopy is a quintessential tool for observing cells and understanding the underlying mechanisms of life-sustaining processes of all living organisms. The problem of extracting 3D shape of mitochondria from fluorescence microscopy images remains unsolved due to the complex and varied shapes expressed by mitochondria and the poor resolving capacity of these microscopes. We propose an approach to bridge this gap by learning a shape prior for mitochondria termed as MiShape, by leveraging high-resolution electron microscopy data. MiShape is a generative model learned using implicit…
Institute of Imaging and Computer Vision, RWTH Aachen University（亚琛工业大学成像与计算机视觉研究所）
Automated image processing approaches are indispensable for many biomedical experiments and help to cope with the increasing amount of microscopy image data in a fast and reproducible way. Especially state-of-the-art deep learning-based approaches most often require large amounts of annotated training data to produce accurate and generalist outputs, but they are often compromised by the general lack of those annotated data sets. In this work, we propose how conditional generative adversarial networks can be utilized to generate realistic image data for 3D fluorescence microscopy from annotatio…
Fluorescence microscopy is a widely used method among cell biologists for studying the localization and co-localization of fluorescent protein. For microbial cell biologists, these studies often include tedious and time-consuming manual segmentation of bacteria and of the fluorescence clusters or working with multiple programs. Here, we present MicroAnalyzer - a tool that automates these tasks by providing an end-to-end platform for microscope image analysis. While such tools do exist, they are costly, black-boxed programs. Microanalyzer offers an open-source alternative to these tools, allowi…
Department of Electrical Engineering, University of Notre Dame（圣母大学电气工程系）；Department of Biological Sciences, University of Notre Dame（圣母大学生物科学系）
Fluorescence microscopy has been a significant tool to observe long-term imaging of embryos (in vivo) growth over time. However, cumulative exposure is phototoxic to such sensitive live samples. While techniques like light-sheet fluorescence microscopy (LSFM) allow for reduced exposure, it is not well suited for deep imaging models. Other computational techniques are computationally expensive and often lack restoration quality. To address this challenge, one can use various low-dosage imaging techniques that are developed to achieve the 3D volume reconstruction using a few slices in the axial …
UCA（蔚蓝海岸大学）；CNRS（法国国家科学研究中心）；INRIA（法国国家信息与自动化研究所）；University of Bath（巴斯大学）
The spatial resolution of images of living samples obtained by fluorescence microscopes is physically limited due to the diffraction of visible light, which makes the study of entities of size less than the diffraction barrier (around 200 nm in the x-y plane) very challenging. To overcome this limitation, several deconvolution and super-resolution techniques have been proposed. Within the framework of inverse problems, modern approaches in fluorescence microscopy reconstruct a super-resolved image from a temporal stack of frames by carefully designing suitable hand-crafted sparsity-promoting r…
Saudi Electronic University（沙特电子大学）；The Commonwealth Scientific and Industrial Research Organisation（澳大利亚联邦科学与工业研究组织）；The Australian National University（澳大利亚国立大学）；University of Technology Sydney（悉尼科技大学）；the University of Western Australia（西澳大利亚大学）
Accurate localization of proteins from fluorescence microscopy images is challenging due to the inter-class similarities and intra-class disparities introducing grave concerns in addressing multi-class classification problems. Conventional machine learning-based image prediction pipelines rely heavily on pre-processing such as normalization and segmentation followed by hand-crafted feature extraction to identify useful, informative, and application-specific features. Here, we demonstrate that deep learning-based pipelines can effectively classify protein images from different datasets. We prop…
A Zero-Shot Deep Image Prior Framework for Denoising and Deconvolution in Fluorescence Microscopy
Wenzhou Key Laboratory of Biomedical Imaging（温州生物医学成像重点实验室）；Zhejiang Key Laboratory of Soft Matter Biomedical Materials（浙江软物质生物医学材料重点实验室）；Wenzhou Institute, University of Chinese Academy of Sciences（中国科学院大学温州研究院）；Postgraduate Training Base Alliance of Wenzhou Medical University（温州医学院研究生联合培养基地联盟）
European Laboratory for Non-Linear Spectroscopy (LENS), University of Florence（佛罗伦萨大学欧洲非线性光谱实验室）；Bioretics SrL（Bioretics SrL公司）；National Institute of Optics, National Research Council (INO-CNR)（国家研究委员会国家光学研究所）；Department of Physics（物理系）
Semantic segmentation of neuronal structures in 3D high-resolution fluorescence microscopy imaging of the human brain cortex can take advantage of bidimensional CNNs, which yield good results in neuron localization but lead to inaccurate surface reconstruction. 3D CNNs, on the other hand, would require manually annotated volumetric data on a large scale and hence considerable human effort. Semi-supervised alternative strategies which make use only of sparse annotations suffer from longer training times and achieved models tend to have increased capacity compared to 2D CNNs, needing more ground…
3D fluorescence microscopy of living organisms has increasingly become an essential and powerful tool in biomedical research and diagnosis. An exploding amount of imaging data has been collected, whereas efficient and effective computational tools to extract information from them are still lagging behind. This is largely due to the challenges in analyzing biological data. Interesting biological structures are not only small, but are often morphologically irregular and highly dynamic. Although tracking cells in live organisms has been studied for years, existing tracking methods for cells are n…
ETH Zurich（苏黎世联邦理工学院）；University Hospital and University of Zurich（苏黎世大学医院和苏黎世大学）；Uppsala University（乌普萨拉大学）
Fluorescence microscopy allows for a detailed inspection of cells, cellular networks, and anatomical landmarks by staining with a variety of carefully-selected markers visualized as color channels. Quantitative characterization of structures in acquired images often relies on automatic image analysis methods. Despite the success of deep learning methods in other vision applications, their potential for fluorescence image analysis remains underexploited. One reason lies in the considerable workload required to train accurate models, which are normally specific for a given combination of markers…
Colocalization analysis aims to study complex spatial associations between bio-molecules via optical imaging techniques. However, existing colocalization analysis workflows only assess an average degree of colocalization within a certain region of interest and ignore the unique and valuable spatial information offered by microscopy. In the current work, we introduce a new framework for colocalization analysis that allows us to quantify colocalization levels at each individual location and automatically identify pixels or regions where colocalization occurs. The framework, referred to as spatia…
This paper describes an investigation into part of the mechanical mechanisms underlying the formation of mitotic spindle, the cellular machinery responsible for chromosomal separation during cell division. In normal eukaryotic cells, spindles are composed of microtubule filaments that radiate outward from two centrosomes. In many transformed cells, however, centrosome number is misregulated resulting in cells with more than two centrosomes. Addressing the question of how these cells accommodate these additional structures by coalescing supernumerary centrosomes to form normal spindles will pro…
ETH Zurich（苏黎世联邦理工学院）；University Hospital（大学医院）；University of Zurich（苏黎世大学）；Uppsala University（乌普萨拉大学）
Fluorescence microscopy images contain several channels, each indicating a marker staining the sample. Since many different marker combinations are utilized in practice, it has been challenging to apply deep learning based segmentation models, which expect a predefined channel combination for all training samples as well as at inference for future application. Recent work circumvents this problem using a modality attention approach to be effective across any possible marker combination. However, for combinations that do not exist in a labeled training dataset, one cannot have any estimation of…
Visualizing the details of different cellular structures is of great importance to elucidate cellular functions. However, it is challenging to obtain high quality images of different structures directly due to complex cellular environments. Fluorescence staining is a popular technique to label different structures but has several drawbacks. In particular, label staining is time consuming and may affect cell morphology, and simultaneous labels are inherently limited. This raises the need of building computational models to learn relationships between unlabeled microscopy images and labeled fluo…
Fluorescence microscopy is a key driver to promote discoveries of biomedical research. However, with the limitation of microscope hardware and characteristics of the observed samples, the fluorescence microscopy images are susceptible to noise. Recently, a few self-supervised deep learning (DL) denoising methods have been proposed. However, the training efficiency and denoising performance of existing methods are relatively low in real scene noise removal. To address this issue, this paper proposed self-supervised image denoising method Noise2SR (N2SR) to train a simple and effective image den…
University of Notre Dame（圣母大学）；California Institute of Technology（加州理工学院）
Fluorescence microscopy has enabled a dramatic development in modern biology by visualizing biological organisms with micrometer scale resolution. However, due to the diffraction limit, sub-micron/nanometer features are difficult to resolve. While various super-resolution techniques are developed to achieve nanometer-scale resolution, they often either require expensive optical setup or specialized fluorophores. In recent years, deep learning has shown the potentials to reduce the technical barrier and obtain super-resolution from diffraction-limited images. For accurate results, conventional …
Kymographs are widely used to represent and anal- yse spatio-temporal dynamics of fluorescence markers along curvilinear biological compartments. These objects have a sin- gular geometry, thus kymograph reconstruction is inherently an analog image processing task. However, the existing approaches are essentially digital: the kymograph photometry is sampled directly from the time-lapse images. As a result, such kymographs rely on raw image data that suffer from the degradations entailed by the image formation process and the spatio-temporal resolution of the imaging setup. In this work, we addr…
Deblurring is a fundamental inverse problem in bioimaging. It requires modelling the point spread function (PSF), which captures the optical distortions entailed by the image formation process. The PSF limits the spatial resolution attainable for a given microscope. However, recent applications require a higher resolution, and have prompted the development of super-resolution techniques to achieve sub-pixel accuracy. This requirement restricts the class of suitable PSF models to analog ones. In addition, deblurring is computationally intensive, hence further requiring computationally efficient…
University of Notre Dame（圣母大学）；California Institute of Technology（加州理工学院）；Indiana University（印第安纳大学）
Fluorescence lifetime imaging microscopy (FLIM) systems are limited by their slow processing speed, low signal-to-noise ratio (SNR), and expensive and challenging hardware setups. In this work, we demonstrate applying a denoising convolutional network to improve FLIM SNR. The network will be integrated with an instant FLIM system with fast data acquisition based on analog signal processing, high SNR using high-efficiency pulse-modulation, and cost-effective implementation utilizing off-the-shelf radio-frequency components. Our instant FLIM system simultaneously provides the intensity, lifetime…
A novel framework employing deep multi-attention channels network for the autonomous detection of metastasizing cells through fluorescence microscopy
Insigneo Institute for in-silico Medicine（Insigneo 计算机医学研究所）；University of Sheffield（谢菲尔德大学）；The Medical School, University of Sheffield（谢菲尔德大学医学院）；Madeira Chemistry Research Centre, University of Madeira（马德拉大学马德拉化学研究中心）；Karolinska Institutet（卡罗林斯卡学院）
