In Bitcoin and Ethereum, nodes require large storage capacity to maintain all the blockchain data, such as transactions, UTXOs, and account states. As of May 2020, the storage size of the Bitcoin blockchain has expanded to 270 GB, and it will continue to increase. This storage requirement is a major hurdle to becoming a block proposer or validator. Although many studies have attempted to reduce the storage size, in the proposed methods, a node cannot keep all blocks or cannot generate a block. We propose an architecture called Trail that allows nodes to hold all blocks in a small storage and to generate and validate blocks and transactions. Trail does not depend on a consensus algorithm or fork choice rule. In this architecture, a client who issues transactions has the data to prove its own balances and can generate a transaction containing the proof of balances. The nodes in Trail do not store transactions, UTXOs and account balances: they keep only blocks. The blocksize is approximately 8 KB, which is 100 times smaller than that of Bitcoin. Further, the block size is constant regardless of the number of accounts and the number of transactions. Compared to traditional blockchains, clients who issue transactions must store additional data. However, we show that proper data archiving can keep the account device storage size small. Trail allows more users to be block proposers and validators and improves the decentralization of the blockchain.
In Bitcoin, to independently verify whether new transactions are correct or not, a type of a node called "Full Node" has to hold the whole of historical transactions. The transactions are stored in ledger called "Blockchain. " Blockchain is an append-only data structure. Thus, to operate Full Nodes, the required storage capacity would grow too large for resource-constrained devices. Due to the limitation, the existing lightweight node scheme is that a node relies on other Full Nodes. In this thesis, to reduce storage capacity with keeping the independence of each node, we propose a storage loa…
Cryptocurrencies, implemented with blockchain protocols, promise to become a global payment system if they can overcome performance limitations. Rapidly advancing architectures improve on latency and throughput, but most require all participating servers to process all transactions. Several recent works propose to shard the system, such that each machine would only process a subset of the transactions. However, we identify a denial-of-service attack that is exposed by these solutions - an attacker can generate transactions that would overload a single shard, thus delaying processing in the ent…
Blockchain, which is a technology for distributedly managing ledger information over multiple nodes without a centralized system, has elicited increasing attention. Performing experiments on actual blockchains are difficult because a large number of nodes in wide areas are necessary. In this study, we developed a blockchain network simulator SimBlock for such experiments. Unlike the existing simulators, SimBlock can easily change behavior of node, so that it enables to investigate the influence of nodes' behavior on blockchains. We compared some simulation results with the measured values in a…
Existing permissioned blockchain systems designate a fixed and explicit group of committee nodes to run a consensus protocol that confirms the same sequence of blocks among all nodes. Unfortunately, when such a permissioned blockchain runs in a large scale on the Internet, these explicit committee nodes can be easily turned down by denial-of-service (DoS) or network partition attacks. Although work proposes scalable BFT protocols that run on a larger number of committee nodes, their efficiency drops dramatically when only a small number of nodes are attacked. In this paper, our EGES protocol l…
This paper reviews and highlights how coding schemes have been used to solve various problems in blockchain systems. Specifically, these problems relate to scaling blockchains in terms of their data storage, computation and communication cost, as well as security. To this end, this paper considers the use of coded blocks or shards that allows participants to store only a fraction of the total blockchain, protect against malicious nodes or erasures due to nodes leaving a blockchain system, ensure data availability in order to promote transparency, and scale the security of sharded blockchains. …
In this paper, we propose a scheme called securePrune for reducing the storage space of a full node and synchronization time of bootstrapping nodes joining the Peer-to-Peer (P2P) network in an Unspent Transaction Outputs (UTXO) based blockchain like bitcoin using RSA accumulators. The size of the bitcoin blockchain is growing linearly with transactions. We propose a new block structure to represent the state of a blockchain also called UTXO set by including an accumulator of a state in the block header and proofs of knowledge for inclusion and deletion of the transactions of the current block …
A blockchain is a distributed ledger for recording transactions, maintained by many nodes without central authority through a distributed cryptographic protocol. All nodes validate the information to be appended to the blockchain, and a consensus protocol ensures that the nodes agree on a unique order in which entries are appended. Consensus protocols for tolerating Byzantine faults have received renewed attention because they also address blockchain systems. This work discusses the process of assessing and gaining confidence in the resilience of a consensus protocols exposed to faults and adv…
The concept of a decentralized ledger usually implies that each node of a blockchain network stores the entire blockchain. However, in the case of popular blockchains, which each weigh several hundreds of GB, the large amount of data to be stored can incite new or low-capacity nodes to run lightweight clients. Such nodes do not participate to the global storage effort and can result in a centralization of the blockchain by very few nodes, which is contrary to the basic concepts of a blockchain. To avoid this problem, we propose new low storage nodes that store a reduced amount of data generate…
Edge computing draws a lot of recent research interests because of the performance improvement by offloading many workloads from the remote data center to nearby edge nodes. Nonetheless, one open challenge of this emerging paradigm lies in the potential security issues on edge nodes and end devices, e.g., sensors and controllers. This paper proposes a cooperative protocol, namely DEAN, across edge nodes to prevent data manipulation, and to allow fair data sharing with quick recovery under resource constraints of limited storage, computing, and network capacity. Specifically, DEAN leverages a p…
Blockchain technologies can enable secure computing environments among mistrusting parties. Permissioned blockchains are particularly enlightened by companies, enterprises, and government agencies due to their efficiency, customizability, and governance-friendly features. Obviously, seamlessly fusing blockchain and cloud computing can significantly benefit permissioned blockchains; nevertheless, most blockchains implemented on clouds are originally designed for loosely-coupled networks where nodes communicate asynchronously, failing to take advantages of the closely-coupled nature of cloud ser…
Public blockchains are decentralized networks where each participating node executes the same decision-making process. This form of decentralization does not scale well because the same data are stored on each network node, and because all nodes must validate each transaction prior to their confirmation. One solution approach decomposes the nodes of a blockchain network into subsets called "shards", each shard processing and storing disjoint sets of transactions in parallel. To fully benefit from the parallelism of sharded blockchains, the processing load of shards must be evenly distributed. …
Blockchains have attracted a great deal of attention as a technology for the distributed management of register information at multiple nodes without a centralized system. However, they possess the drawbacks of low transaction throughput and long approval time. These problems can be addressed by shortening the block generation interval; however, shortening this interval alone has the effect of increasing the frequency of forks. In this study, we aim to shorten the block generation interval without increasing the fork generation rate by improving the network topology of the nodes and shortening…
The exponential growth of the blockchain size has become a major contributing factor that hinders the decentralisation of blockchain and its potential implementations in data-heavy applications. In this paper, we propose segment blockchain, an approach that segmentises blockchain and enables nodes to only store a copy of one blockchain segment. We use \emph{PoW} as a membership threshold to limit the number of nodes taken by an Adversary---the Adversary can only gain at most $n/2$ of nodes in a network of $n$ nodes when it has $50\%$ of the calculation power in the system (the Nakamoto blockch…
As an append-only distributed database, blockchain is utilized in a vast variety of applications including the cryptocurrency and Internet-of-Things (IoT). The existing blockchain solutions have downsides in communication and storage efficiency, convergence to centralization, and consistency problems. In this paper, we propose LightChain, which is the first blockchain architecture that operates over a Distributed Hash Table (DHT) of participating peers. LightChain is a permissionless blockchain that provides addressable blocks and transactions within the network, which makes them efficiently a…
Blockchain sharding is a promising approach to solving the dilemma between decentralisation and high performance (transaction throughput) for blockchain. The main challenge of Blockchain sharding systems is how to reach a decision on a statement among a sub-group (shard) of people while ensuring the whole population recognises this statement. Namely, the challenge is to prevent an adversary who does not have the majority of nodes globally but have the majority of nodes inside a shard. Most Blockchain sharding approaches can only reach a correct consensus inside a shard with at most $n/3$ evil …
The performance of partially synchronous BFT-based consensus protocols is highly dependent on the primary node. All participant nodes in the network are blocked until they receive a proposal from the primary node to begin the consensus process.Therefore, an honest but slack node (with limited bandwidth) can adversely affect the performance when selected as primary. Hermes decreases protocol dependency on the primary node and minimizes transmission delay induced by the slack primary while keeping low message complexity and latency. Hermes achieves these performance improvements by relaxing stro…
There is surge of interest to the blockchain technology not only in the scientific community but in the business community as well. Proof of Work (PoW) and Byzantine Fault Tolerant (BFT) are the two main classes of consensus protocols that are used in the blockchain consensus layer. PoW is highly scalable but very slow with about 7 (transactions/second) performance. BFT based protocols are highly efficient but their scalability are limited to only tens of nodes. One of the main reasons for the BFT limitation is the quadratic $O(n^2)$ communication complexity of BFT based protocols for $n$ node…
To address the large amount of energy wasted by blockchains, we propose a decentralized consensus protocol for blockchains in which the computation can be used to search for good approximate solutions to any optimization problem. Our protocol allows the wasted energy to be used for finding approximate solutions to problems submitted by any nodes~(called clients). Our protocol works in a similar way to proof-of-work, and it makes nodes evaluate a large number of solution candidates to add a new block to the chain. A client provides a search program that implements any search algorithm that find…
Blockchain Sharding is a blockchain performance enhancement approach. By splitting a blockchain into several parallel-run committees (shards), it helps increase transaction throughput, reduce computational resources required, and increase reward expectation for participants. Recently, several flexible sharding methods that can tolerate up to $n/2$ Byzantine nodes ($n/2$ security level) have been proposed. However, these methods suffer from three main drawbacks. First, in a non-sharding blockchain, nodes can have different weight (power or stake) to create a consensus, and as such an adversary …
Automotive software is increasingly complex and critical to safe vehicle operation, and related embedded systems must remain up-to-date to ensure long-term system performance. Update mechanisms and data modification tools introduce opportunities for malicious actors to compromise these cyber-physical systems, and for trusted actors to mistakenly install incompatible software versions. A distributed and stratified "black box" audit trail for automotive software and data provenance is proposed to assure users, service providers, and original equipment manufacturers (OEMs) of vehicular software i…
This paper presents $\mathit{wChain}$, a blockchain protocol specifically designed for multihop wireless networks that deeply integrates wireless communication properties and blockchain technologies under the realistic SINR model. We adopt a hierarchical spanner as the communication backbone to address medium contention and achieve fast data aggregation within $O(\log N\logΓ)$ slots where $N$ is the network size and $Γ$ refers to the ratio of the maximum distance to the minimum distance between any two nodes. Besides, $\mathit{wChain}$ employs data aggregation and reaggregation, and node recov…
Blockchains is a special type of distributed systems that operates in unsafe networks. In most blockchains, all nodes should reach consensus on all state transitions with Byzantine fault tolerant algorithms, which creates bottlenecks in performance. In this paper, we propose a new type of blockchains, namely Value-Centric Blockchains (VCBs), in which the states are specified as values (or more comprehensively, coins) with owners and the state transition records are then specified as proofs of the ownerships of individual values. We then formalize the "rational" assumptions that have been used …
Blockchain technologies have been rapidly enhanced in recent years. However, its scalability still has limitations in terms of throughput and broadcast delay as the network and the amount of transaction data increase. To improve scalability of blockchain networks, we propose a novel approach named PiChu that accelerates block propagation in blockchain networks by pipelining and verifying chunks of a block in parallel. Accelerating block propagation reduces the mining interval and chance of fork occurring, which in turn increases throughput. Our approach can be applied to the blockchain network…
Sharding has shown great potential to scale out blockchains. It divides nodes into smaller groups which allow for partial transaction processing, relaying and storage. Hence, instead of running one blockchain, we will run multiple blockchains in parallel, and call each one a shard. Sharding can be applied to address shortcomings due to compulsory duplication of three resources in blockchains, i.e., computation, communication and storage. The most pressing issue in blockchains today is throughput. Hence, usually the main focus is to shard computation which leads to concurrent transaction proces…
Traditional Blockchain Sharding approaches can only tolerate up to n/3 of nodes being adversary because they rely on the hypergeometric distribution to make a failure (an adversary does not have n/3 of nodes globally but can manipulate the consensus of a Shard) hard to happen. The system must maintain a large Shard size (the number of nodes inside a Shard) to sustain the low failure probability so that only a small number of Shards may exist. In this paper, we present a new approach of Blockchain Sharding that can withstand up to n/2 of nodes being bad. We categorise the nodes into different c…
Motivated by the massive energy usage of blockchain, on the one hand, and by significant performance improvements in low-power, wimpy systems, on the other hand, we perform an in-depth time-energy analysis of blockchain systems on low-power nodes in comparison to high-performance nodes. We use three low-power systems to represent a wide range of the performance-power spectrum, while covering both x86/64 and ARM architectures. We show that low-end wimpy nodes are struggling to run full-fledged blockchains mainly due to their small and low-bandwidth memory. On the other hand, wimpy systems with …
Blockchains are distributed secure ledgers to which transactions are issued continuously and each block of transactions is tightly coupled to its predecessors. Permissioned blockchains place special emphasis on transactions throughput. In this paper we present FireLedger, which leverages the iterative nature of blockchains in order to improve their throughput in optimistic execution scenarios. FireLedger trades latency for throughput in the sense that in FireLedger the last f + 1 blocks of each node's blockchain are considered tentative, i.e., they may be rescinded in case one of the last f + …
We introduce Blockene, a blockchain that reduces resource usage at member nodes by orders of magnitude, requiring only a smartphone to participate in block validation and consensus. Despite being lightweight, Blockene provides a high throughput of transactions and scales to a large number of participants. Blockene consumes negligible battery and data in smartphones, enabling millions of users to participate in the blockchain without incentives, to secure transactions with their collective honesty. Blockene achieves these properties with a novel split-trust design based on delegating storage an…
Truxen is a Trusted Computing enhanced blockchain that uses Proof of Integrity protocol as the consensus. Proof of Integrity protocol is derived from Trusted Computing and associated Remote Attestations, that can be used to vouch a node's identity and integrity to all of the other nodes in the blockchain network. In this paper we describe how Trusted Computing and Proof of Integrity can be used to enhance blockchain in the areas of mining block, executing transaction and smart contract, protecting sensitive data. Truxen presents a Single Execution Model, that can verify and execute transaction…
In recent years, with the rapid development and popularization of BitCoin, the research of blockchain technology has also shown growth. It has gradually become a new generation of distributed, non-centralized and trust-based technology solution. However, the blockchain operation is expensive and transaction is delayed. Take BitCoin as an example. On the one hand, a block is produced every ten minute. On the other hand, once the new block is generated, it takes a certain time to propagate world wide. The slow speed of propagation determines that BitCoin can not use too small block interval time…
Blockchain is an incrementally updated ledger maintained by distributed nodes rather than centralized organizations. The current blockchain technology faces scalability issues, which include two aspects: low transaction throughput and high storage capacity costs. This paper studies the blockchain structure based on state sharding technology, and mainly solves the problem of non-scalability of block chain storage. This paper designs and implements the blockchain state sharding scheme, proposes a specific state sharding data structure and algorithm implementation, and realizes a complete blockch…
A Unitychain is a novel blockchain-like structure that drastically improves transaction scalability and security while maintaining ongoing network performance, even if participating nodes are required to perform a new Distributed Key Generation procedure for security purposes. The Unitychain structure, furthermore, enables greater parallel processing by the assignment of different network node configurations for various database and compute ranges into multiple strands of blockchains that intersect, creating a multi-helix structure, which we call a Unitychain. This thereby enables the network …
Full nodes, which synchronize the entire blockchain history and independently validate all the blocks, form the backbone of any blockchain network by playing a vital role in ensuring security properties. On the other hand, a user running a full node needs to pay a heavy price in terms of storage costs. E.g., the Bitcoin blockchain size has grown over 215GB, in spite of its low throughput. The ledger size for a high throughput blockchain Ripple has already reached 9TB, and it is growing at an astonishing rate of 12GB per day! In this paper, we propose an architecture based on 'fountain codes', …
The first obstacle that regular users encounter when setting up a node for a public blockchain is the time taken for downloading all the data needed for the node to start operating correctly. In fact, this may last from hours to weeks for the major networks. Our contribution is twofold. Firstly, we show a design that enables mining and validation of new blocks keeping only a very small state. Secondly, we show that it is possible to store the state of the blockchain in a distributed hash table obtaining a wide spectrum of trade-offs between storage committed by the nodes and replication factor…
A blockchain is an append-only linked-list of blocks, which is maintained at each participating node. Each block records a set of transactions and their associated metadata. Blockchain transactions act on the identical ledger data stored at each node. Blockchain was first perceived by Satoshi Nakamoto as a peer-to-peer digital-commodity (also known as crypto-currency) exchange system. Blockchains received traction due to their inherent property of immutability-once a block is accepted, it cannot be reverted.
Blockchain-based Distributed Ledgers (DLs) promise to transform the existing financial system by making it truly democratic. In the past decade, blockchain technology has seen many novel applications ranging from the banking industry to real estate. However, in order to be adopted universally, blockchain systems must be scalable to support a high volume of transactions. As we increase the throughput of the DL system, the underlying peer-to-peer network might face multiple levels of challenges to keep up with the requirements. Due to varying network capacities, the slower nodes would be at a re…
Blockchain protocols are based on a distributed database where stored data is guaranteed to be immutable. The requirement that all nodes have to maintain their own local copy of the database ensures security while consensus mechanisms help deciding which data gets added to the database and keep powerful adversaries from derailing the system. However, since the database that forms the foundation of a blockchain is a continuously growing list of blocks, scalability is an inherent problem of this technology. Some public blockchains need a few 100 GB to Terabytes of storage. In this work, we prese…
In this paper, we present the most extensive evaluation of blockchain system to date. To achieve scalability across servers in more than 10 countries located on 4 different continents, we drastically revisited Byzantine fault tolerant blockchains and verification of signatures. The resulting blockchain, called the Red Belly Blockchain (RBBC), commits more than a hundred thousand transactions issued by permissionless nodes. These transactions are grouped into blocks within few seconds through a partially synchronous consensus run by permissioned nodes. It prevents double spending by guaranteein…
Soteria is a user right management system designed to safeguard user-data privacy in a transparent and provable manner in compliance to regulations such as GDPR and CCPA. Soteria represents user data rights as formal executable sharing agreements, which can automatically be translated into a human readable form and enforced as data are queried. To support revocation and to prove compliance, an indelible, audited trail of the hash of data access and sharing agreements are stored on a two-layer distributed ledger. The main chain ensures partition tolerance and availability (PA) properties while …
As an append-only distributed database, blockchain is utilized in a vast variety of applications including the cryptocurrency and Internet-of-Things (IoT). The existing blockchain solutions show downsides in communication and storage scalability, as well as decentralization. In this article, we propose LightChain , which is the first blockchain architecture that operates over a Distributed Hash Table (DHT) of participating peers. LightChain is a permissionless blockchain that provides addressable blocks and transactions within the network, which makes them efficiently accessible by all peers. …
Blockchain is a type of decentralized distributed network which acts as an immutable digital ledger. Despite the absence of any central governing authority to validate the blocks in the ledger, it is considered secure and immutable due to the consensus protocol among various nodes of the network. A consensus algorithm is a mechanism that guarantees the reliability of the blockchain and helps all connected nodes or peers to reach common ground regarding the present state of the blockchain network thus an ideal consensus algorithm must be secure, reliable, and fast. There are several different a…
