Alloying metals with other elements is often done to improve the material strength or hardness. A key microscopic mechanism is precipitation hardening, where precipitates impede dislocation motion, but the role of such obstacles in determining the nature of collective dislocation dynamics remains to be understood. Here, three-dimensional discrete dislocation dynamics simulations of FCC single crystals are performed with fully coherent spherical precipitates from zero precipitate density upto $ρ_p = 10^{21}\,\text{m}^{-3}$ and at various dislocation-precipitate interaction strengths. When the dislocation-precipitate interactions do not play a major role the yielding is qualitatively as for pure crystals, i.e., dominated by "dislocation jamming", resulting in glassy dislocation dynamics exhibiting critical features at any stress value. We demonstrate that increasing the precipitate density and/or the dislocation-precipitate interaction strength creates a true yield or dislocation assembly depinning transition, with a critical yield stress. This is clearly visible in the statistics of dislocation avalanches observed when quasistatically ramping up the external stress, and is also manifested in the response of the system to constant applied stresses. The scaling of the yielding with precipitates is discussed in terms of the Bacon-Kocks-Scattergood relation.
Precipitation strengthening is one of the most effective methods to design alloys with the desired combination of strength and ductility. The main mechanism of strengthening is generally known to be the interaction between dislocations and precipitates. When a dislocation encounters a precipitate, it bends and therefore the level of applied stress to the precipitate increases. Once the applied stress reaches the precipitate resistance, it passes the precipitate. Dislocations can bypass precipitates either by forming the Orowan loops or by cutting them. In this research, the focus is set on a s…
Computational analysis of short-range interactions between an edge dislocation and an array of equally-spaced identical shearable or non-shearable precipitates
Discovering relationships between materials' microstructures and mechanical properties is a key goal of materials science. Here, we outline a strategy exploiting Bayesian optimization to efficiently search the multidimensional space of microstructures, defined here by the size distribution of precipitates (fixed impurities or inclusions acting as obstacles for dislocation motion) within a simple two-dimensional discrete dislocation dynamics model. The aim is to design a microstructure optimizing a given mechanical property, e.g., maximizing the expected value of shear stress for a given strain…
The two-dimensional dislocation dynamics approach has been recently used for analyzing plastic deformation in metals and alloys at elevated temperatures. The two-dimensional approach, however, only accounts for the dislocation climbing process, and it assumes that dislocation bypassing and shearing of precipitates are negligible. To examine the validity of this assumption, this study quantifies dislocation bypassing and shearing of precipitates in terms of critical resolved shear stress, interaction time, and thermal activation energy for various precipitate strength levels, temperatures, and …
We study the mean-field limit of an elasto-plastic model introduced to describe the yielding transition of athermally and quasi-statically sheared amorphous solids. We focus on the sample-to-sample fluctuations, which we characterize analytically, and investigate in detail the analogy with the athermally driven random-field Ising model. We stress that the random field at the yielding transition is an emerging disorder and we investigate the various factors that determine its strength.
NOMATEN Centre of Excellence, National Centre of Nuclear Research（NOMATEN卓越中心，国家核研究中心）；Department of Applied Physics, Aalto University（阿尔托大学应用物理系）
Plastic yielding in solids strongly depends on various conditions, such as temperature and loading rate and indeed, sample-dependent knowledge of yield points in structural materials promotes reliability in mechanical behavior. Commonly, yielding is measured through controlled mechanical testing at small or large scales, in ways that either distinguish elastic (stress) from total deformation measurements, or by identifying plastic slip contributions. In this paper we argue that instead of separate elastic/plastic measurements, yielding can be unraveled through statistical analysis of total str…
Graphene is well known for its extraordinary mechanical properties combining brittleness and ductility. While most mechanical studies of graphene focused on the strength and brittle fracture behavior, its ductility, plastic deformation, and the possible brittle-to-ductile transition, which are important for high-temperature mechanical performance and applications, still remain much less understood. Here the mechanical response and deformation dynamics of graphene grain boundaries are investigated through a phase field crystal modeling, showing the pivotal effects of temperature and local dislo…
A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge volumes were smaller than the length scale of the highly cored structure of the parent material from which they were produced, their subtle composition differences gave rise to differing work hardening rates, influenced by varying secondary dendrite arm spacings, gamma-prime phase solvus temperatures and a topologically inverted gamma/gamma-prime microstruct…
Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resulting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilizes stress-induced martensitic transformations but does not retain the martensite phase. This strategy is based on the introduction of superelastic nano-precipitates, which exhibit reverse transformatio…
Bonding between polymeric interfaces is encountered widely in several industrial applications. Many of these bonding processes rely on time-consuming and temperature-dependent classical mechanism of polymer interdiffusion via reptation in a melt state. Here, for the first time, we report a new mechanistic pathway for achieving solid-state polymer bonding by triggering rapid macromolecular acceleration through mechanical deformation. Large-scale molecular simulations reveal that active plastic deformation in glassy polymers, at temperatures well-below the bulk (and surface) glass transition tem…
Dislocations are the carriers of plasticity in crystalline materials. Their collective interaction behavior is dependent on the strain rate and sample size. In small specimens, details of the nucleation process are of particular importance. In the present work, discrete dislocation dynamics (DDD) simulations are performed to investigate the dominant yielding mechanisms in single crystalline copper pillars with diameters ranging from 100 to 800 nm. Based on our simulations with different strain rates and sample size, we observe a transition of the relevant nucleation mechanism from "dislocation…
Aiming at increasing the yield strength of transformation and twinning induced plasticity (TRIP and TWIP) titanium alloys, a dual-phase $α$/$β$ alloy is designed and studied. The composition Ti 7Cr 1.5Sn (wt.%) is proposed, based on an approach coupling Calphad calculations and classical Bo-Md design tool used in Ti-alloys. Its microstructure is made of 20% of $α$ precipitates in a $β$ matrix, the matrix having optimal Bo and Md parameters for deformation twinning and martensitic transformation. The alloy indeed displays a yield strength of 760 MPa, about 200 MPa above that of a Ti 8.5Cr 1.5Sn…
In this study, we use discrete dislocation dynamics (DDD) simulation to investigate the effect of heterogeneous dislocation density on the transition between quasi-elastic deformation and plastic flow in face-centered cubic single crystals. By analyzing the stress-strain curves of samples with an initial, axial dislocation density gradient, we arrive at the following conclusions: (i) in the regime of quasi-elastic deformation before the onset of plastic flow, the effective elastic modulus of the simulated samples falls significantly below the value for a dislocation-free crystal. This modulus …
Metallic glasses are known to have a remarkably robust yield strength, admitting Weibull moduli as high as for crystalline engineering alloys. However, their post-yielding behavior is strongly varying, with large scatter in both flow stress levels and strains at failure. Using x-ray tomography we reveal for the first time how a strain-dependent internal evolution of shear-band cavities underlies this unpredictable post yielding response. We demonstrate how macroscopic strain-softening coincides with the first detection of internal shear-band cavitation. Cavity growth during plastic flow is fou…
We study the mechanical response of a dislocation-free 2D crystal under homogenous shear using a new mesoscopic approach to crystal plasticity, a Landau-type theory, accounting for the global invariance of the energy in the space of strain tensors while operating with an infinite number of equivalent energy wells. The advantage of this approach is that it eliminates arbitrariness in dealing with topological transitions involved, for instance, in nucleation and annihilation of dislocations. We use discontinuous yielding of pristine micro-crystals as a benchmark problem for the new theory and sh…
The shear-banding instability in quasi-statically driven bulk metallic glasses emerges from collective dynamics, mediated by shear transformation zones and associated non-local elastic interactions. It is also phenomenologically known that sharp structural features of shear bands are typically correlated to the sharpness of the plastic yielding transition, being predominant in commonly studied alloys composed of multiple different elements, that have very different atomic radii. However, in the opposite limit \remove{of high-entropy multicomponent alloys,} where elements' radii are relatively …
In this paper is presented a new single crystal plasticity model with yielding accounting for the tetragonal symmetry of molecular energetic crystals. This new tetragonal yield criterion has been developed using representation theorems for anisotropic tensor functions. It is defined for any type of loadings and depends on the characteristics of the tetragonal lattice (c/a ratio). It involves three independent plastic anisotropy parameters that can be expressed analytically in terms of the uniaxial yield stresses along four crystallographic directions. Illustration of the capabilities of this m…
Intermetallic phases can significantly improve the creep resistance of magnesium alloys, extending their use to higher temperatures. However, little is known about the deformation behaviour of these phases at application temperatures, which are commonly below their macroscopic brittle-to-ductile-transition temperature. In this study, we therefore investigate the activation of different slip systems of the CaMg$_2$ phase and the occurrence of serrated yielding in the temperature range from 50$^\circ$C to 250$^\circ$C. A decreasing amount of serrated flow with increasing temperature suggests tha…
Plasticity in soft amorphous materials typically involves collective deformation patterns that emerge upon intense shearing. The microscopic basis of amorphous plasticity has been commonly established through the notion of "Eshelby"-type events, localized abrupt rearrangements that induce flow in the surrounding material via non-local elastic-type interactions. This universal mechanism in flowing disordered solids has been proposed despite their diversity in terms of scales, microscopic constituents, or interactions. However, we argue that the presence of frictional interactions in granular so…
We measure the local yield stress, at the scale of small atomic regions, in a deeply quenched two-dimensional glass model undergoing shear banding in response to athermal quasistatic (AQS) deformation. We find that the occurrence of essentially a single plastic event suffices to bring the local yield stress distribution to a well-defined value for all strain orientations, thus essentially erasing the memory of the initial structure. It follows that in a well-relaxed sample, plastic events cause the abrupt (nucleation-like) emergence of a local softness contrast and thus precipitate the formati…
The microscopic mechanism by which amorphous solids yield plastically under an externally applied stress or deformation has remained elusive in spite of enormous research activity in recent years. Most approaches have attempted to identify atomic-scale structural "defects" or spatio-temporal correlations in the undeformed glass that may trigger plastic instability. In contrast, here we show that the topological defects which correlate with plastic instability can be identified, not in the static structure of the glass, but rather in the nonaffine displacement field under deformation. These dis…
We consider the yielding behaviour of a model glass subjected to asymmetric cyclic shear deformation, wherein the applied strain varies between 0 and a maximum value $γ_{\rm max}$, and study its dependence on the degree of annealing of the glass and system size. The yielding behaviour of well annealed glasses (unlike poorly annealed glasses) display striking differences from the symmetric case, with the emergence of an intermediate strain regime with substantial plasticity but no yielding. The observed behaviour is satisfactorily captured by a recently proposed model. For larger system sizes, …
