Low Threshold Bound State in the Continuum Lasers in Hybrid Lattice Resonance Metasurfaces
Jhen-Hong Yang, Dmitrii N. Maksimov, Zhen-Ting Huang, Pavel S. Pankin, Ivan V. Timofeev, Kuo-Bing Hong, Heng Li, Jia-Wei Chen, Chu-Yuan Hsu, Yi-Yun Liu, Tien-Ch… 展开作者
Jhen-Hong Yang, Dmitrii N. Maksimov, Zhen-Ting Huang, Pavel S. Pankin, Ivan V. Timofeev, Kuo-Bing Hong, Heng Li, Jia-Wei Chen, Chu-Yuan Hsu, Yi-Yun Liu, Tien-Chang Lu, Tzy-Rong Lin, Chan-Shan Yang, Kuo-Ping Chen
Bound states in the continuum (BICs) have attracted much attention in recent years due to the infinite quality factor (Q-factor) resonance and extremely localized field. In this study, BICs have been demonstrated by dielectric metasurfaces with hybrid surface lattice resonance (SLR) in the experiment. By breaking the symmetry of geometry, SLR can be easily switched between BICs and quasi-BICs. Comparing with literature, switching between BICs and quasi-BICs is usually accompanied by wavelength shift. Here, a design rule is proposed to prevent the wavelength shift when the Q-factor is changing. Also, such a design also makes subsequent identification of the laser threshold more credible. Due to the high Q-factor, low threshold laser is one of the intuitive applications of BICs. Utilize the high localized ability of BICs, low threshold BICs laser can be achieved by the dielectric metasurface immersed with Rhodamine 6G. Interestingly, due to the high Q-factor resonance of BICs, the laser signals and images can be observed in almost transparent samples. Not only the BICs laser is demonstrated in the experiment, but also the mechanism of BICs is deeply analyzed. This study can help readers better understand this novel feature of BICs, and provide the way for engineer BICs metasurfaces. The device can provide various applications, including laser, optical sensing, non-linear optics enhancement, and single-photon source.
We demonstrate that rotationally symmetric chiral metasurfaces can support arbitrarily sharp resonances with the maximum optical chirality determined by precise shaping of bound states in the continuum (BICs). Being uncoupled from one circular polarisation of light and resonantly coupled to its counterpart, a metasurface hosting the chiral BIC resonance exhibits a narrow peak in the circular dichroism spectrum. We propose a realization of such chiral BIC metasurfaces based on pairs of dielectric bars and validate the concept of maximum chirality by numerical simulations
Wavelength-tunable vortex fiber lasers that could generate beams carrying orbital angular momentum (OAM) hold great interest in large-capacity optical communications. The wavelength tunability of conventional vortex fiber lasers is however limited by the range of 35 nm due to narrow bandwidth and/or insertion loss of mode conversion components. Optical metasurfaces apart from being compact planar components can flexibly manipulate light with high efficiency in a broad wavelength range. Here, we propose and demonstrate for the first time, to the best of our knowledge, a metasurface-assisted vor…
Metasurface saturable absorbers may result in versatile mode-locking that allows one to obtain stable ultrashort laser pulses with high repetition rates and peak powers, along with broadband operation, within fiber to solid-state laser cavities.
A patterned structure of monolithic hexagonal boron nitride (hBN) on a glass substrate, which can enhance the emission of the embedded single photon emitters (SPEs), is useful for onchip single-photon sources of high-quality. Here, we design and demonstrate a monolithic hBN metasurface with quasi-bound states in the continuum mode at emission wavelength with ultrahigh Q values to enhance fluorescence emission of SPEs in hBN. Because of ultrahigh electric field enhancement inside the proposed hBN metasurface, an ultrahigh Purcell factor (3.3*10^4) is achieved. In addition, the Purcell factor ca…
Laser printing with a spatial light modulator (SLM) has several advantages over conventional raster-writing and dot-matrix display (DMD) writing: multiple pixel exposure, high power endurance and existing software for computer generated holograms (CGH). We present a technique for the design and manufacturing of plasmonic metasurfaces based on ultrafast laser printing with an SLM. As a proof of principle, we have used this technique to laser print a plasmonic metalens as well as high resolution plasmonic color decorations. The high throughput holographic resonant laser printing (HRLP) approach …
Fingerprint spectral response of several materials with terahertz electromagnetic radiation indicates that terahertz technology is an effective tool for sensing applications. However, sensing few nanometer thin-film of dielectrics with much longer terahertz waves (1 THz = 0.3 mm) is challenging. Here, we demonstrate a quasi-bound state in the continuum (BIC) resonance for sensing of nanometer scale thin analyte deposited on a flexible metasurface. The large sensitivity originates from strong local field confinement of the quasi-BIC Fano resonance state and extremely low absorption loss of a lo…
We experimentally demonstrate fabrication of tunable high contrast periodic fishnet metasurfaces with 3 um period on 200 nm thick Ge2Sb2Te5 films sputted onto glass and sapphire substrates using direct laser writing technique. We find that the use of sapphire substrate provides better accuracy of metasurface segments due to high thermal conductivity. The advantages of the demonstrated method consist in its simplicity, rapidity, robustness, and the ability of tuning of fabricated structures. This is of crucial importance for the creation of robust and tunable metasurfaces for applications in th…
We study, both theoretically and experimentally, tunable metasurfaces supporting sharp Fano-resonances inspired by optical bound states in the continuum. We explore the use of arsenic trisulfide (a photosensitive chalcogenide glass) having optical properties which can be finely tuned by light absorption at the post-fabrication stage. We select the resonant wavelength of the metasurface corresponding to the energy below the arsenic trisulfide bandgap, and experimentally control the resonance spectral position via exposure to the light of energies above the bandgap.
Optically resonant high-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances are usually fabricated by means of planar technologies, which limit the degrees of freedom in tunability and scalability of the fabricated systems. Therefore, we propose a complimentary post-processing technique based on ultrashort ($\leq$ 10 ps) laser pulses. The process involves thermal effects: crystallization and reshaping, while the heat is localized by a high-precision positioning of the focused laser beam. Moreover, for the first time, the resonant behavior of dielectric metasurface…
Plasmonic metasurfaces based on the extraordinary optical transmission effect (EOT) can be designed to efficiently transmit specific spectral bands from the visible to the far-infrared regimes, offering numerous applications in im-portant technological fields such as compact multispectral imaging, biological and chemical sensing, or color displays. However, due to their subwavelength nature, EOT metasurfaces are nowadays fabricated with nano- and micro-lithographic techniques, requiring many processing steps and carried out in expensive cleanroom environments. In this work, we propose and expe…
Enhancing the light-matter interactions in two-dimensional materials via optical metasurfaces has attracted much attention due to its potential to enable breakthrough in advanced compact photonic and quantum information devices. Here, we theoretically investigate a strong coupling between excitons in monolayer WS$_2$ and quasi-bound states in the continuum (quasi-BIC). In the hybrid structure composed of WS$_2$ coupled with asymmetric titanium dioxide nanobars, a remarkable spectral splitting and typical anticrossing behavior of the Rabi splitting can be observed, and such strong coupling effe…
High-efficiency infrared upconversion imaging with nonlinear silicon metasurfaces empowered by quasi-bound states in the continuum
Nanchang University（南昌大学）；Institute for Advanced Study, Nanchang University（南昌大学高等研究院）；School of Education, Nanchang Institute of Science and Technology（南昌理工学院教育学院）；Guangdong Polytechnic Normal University（广东技术师范大学）
Nonlinear nanostructured surfaces provide a paradigm shift in nonlinear optics with new ways to control and manipulate frequency conversion processes at the nanoscale, also offering novel opportunities for applications in photonics, chemistry, material science, and biosensing. Here, we develop a general approach to employ sharp resonances in metasurfaces originated from the physics of bound states in the continuum for both engineering and enhancing the nonlinear response. We study experimentally the third-harmonic generation from metasurfaces composed of symmetry-broken silicon meta-atoms and …
Metasurface-mediated bound states in the continuum (BIC) provides a versatile platform for light manipulation at subwavelength dimension with diverging radiative quality factor and extreme optical localization. In this work, we employ magnetic dipole quasi-BIC resonance in asymmetric silicon nanobar metasurfaces to realize giant Goos-Hänchen (GH) shift enhancement by more than three orders of wavelength. In sharp contrast to GH shift based on the Brewster dip or transmission-type resonance, the maximum GH shift here is located at the reflection peak with unity reflectance, which can be conveni…
High-index dielectric metasurfaces featuring Mie-type electric and magnetic resonances have been of a great interest in a variety of applications such as imaging, sensing, photovoltaics and others, which led to the necessity of an efficient large-scale fabrication technique. To address this, here we demonstrate the use of single-pulse laser interference for direct patterning of an amorphous silicon film into an array of Mie resonators. The proposed technique is based on laser-interference-induced dewetting. A precise control of the laser pulse energy enables the fabrication of ordered dielectr…
Bound states in the continuum (BICs) emerge throughout Physics as leaky/resonant modes that remain however highly localized. They have attracted much attention in Optics and Photonics, and especially in metasurfaces, i.e. planar arrays of sub-wavelength meta-atoms. One of their most outstanding feature is the arbitrarily large Q-factors they induce upon approaching the BIC condition, which we exploit here to achieve a narrow transparency band. We first show how to shift a canonical BIC in an all-dielectric metasurface, consisting of high-refractive disks exhibiting in- and out-of-plane magneti…
In this paper, we present a Bound states in the continuum (BIC) metamaterial in heterogeneous structures based on the universal coupled mode theory. We find the more general physical parameters to represent BIC, which are the resonant frequencies and corresponding phases of metamaterial structures. Therefore, BIC metamaterial comes from the equal value of the resonant frequencies and phases of metamaterial structures which are not only for homogeneous structures. Meanwhile if slightly vary one of metamaterial structure's resonant frequency and phase by varying geometry, we can obtain the quasi…
Lead halide perovskites (MAPbX3) have emerged as promising materials for photovoltaic and optoelectronic devices. However, their exceptional nonlinear properties have not been fully exploited in nanophotonics yet. Herein we fabricate MAPbX3 perovskite metasurfaces and explore their internal nonlinear processes. While both of third-order harmonic generation (THG) and three-photon luminescence are generated, the latter one is less affected by the material loss and has been significantly enhanced by a factor of 60. The corresponding simulation reveals that the improvement is caused by the resonan…
Coherent Perfect Absorber (CPA) and Laser is a pair of inversely worked wave structure satisfying the time-reversal relation. We point out that, if the wave energy absorbed by CPA can be recovered by somewhat way and then be reemitted by its corresponded Laser, their combination can be a wave-controlling device that can "move" the wave energy from one place to another. By extending the concepts of CPA and Laser from the previously studied one-dimensional non-Hermitian systems to the two-dimensional ones, this understanding is used to simplify the designing of the metasurface in this letter. As…
Recent progress in nanophotonics is driven by the desire to engineer light-matter interaction in two-dimensional (2D) materials using high-quality resonances in plasmonic and dielectric structures. Here, we demonstrate a link between the radiation control at critical coupling and the metasurface-based bound states in the continuum (BIC) physics, and develop a generalized theory to engineer light absorption of 2D materials in coupling resonance metasurfaces. In a typical example of hybrid graphene-dielectric metasurfaces, we present the manipulation of absorption bandwidth by more than one orde…
Metafibers expand the functionalities of conventional optical fibers to unprecedented nanoscale light manipulations by integrating metasurfaces on the fiber tips, becoming an emerging light-coupling platform for both nanoscience and fiber optics communities. Mostly exploring the isolated bare fibers, current metafibers remain as proof-of-concept demonstrations due to a lack of standard interfaces with the universal fiber networks. Here, we develop new methodologies to fabricate well-defined plasmonic metasurfaces directly on the end facets of commercial single mode fiber jumpers using standard…
We propose the optical trapping of Rayleigh particles using tailored anisotropic and hyperbolic metasurfaces illuminated with a linearly polarized Gaussian beam. This platform permits to engineer optical traps at the beam axis with a response governed by nonconservative and giant recoil forces coming from the directional excitation of ultra-confined surface plasmons during the light scattering process. Compared to optical traps set over bulk metals, the proposed traps are broadband in the sense that can be set with beams oscillating at any frequency within the wide range in which the metasurfa…
Polaritonic self-hybridized critical coupling by Brillouin zone folding induced quasi-bound states in the continuum in bulk WS2 metasurfaces
Key Laboratory for Physical Electronics and Devices of the Ministry of Education and Shaanxi Key Lab of Information Photonic Technique, School of Electronic Science and Engineering, Xi’an Jiaotong University（教育部电子科学与技术重点实验室和陕西信息光子技术重点实验室，西安交通大学电子科学与工程学院）
Nonlinear metasurfaces offer new paradigm for boosting optical effect beyond limitations of conventional materials. In this work, we present an alternative way to produce pronounced third-harmonic generation (THG) based on nonlinear field resonances rather than linear field enhancement, which is a typical strategy for achieving strong nonlinear response. By designing and studying a nonlinear plasmonic-graphene metasurface at terahertz regime with hybrid guided modes and bound states in the continuum modes, it is found that a THG with a narrow bandwidth can be observed, thanks to the strong res…
Subwavelength periodic confinement can collectively and selectively enhance local light intensity and enable control over the photo-induced phase transformations at the nanometer scale. Standard nanofabrication process can result in geometrical and compositional inhomogeneities in optical phase change materials, especially chalcogenides, as those materials exhibit poor chemical and thermal stability. Here we demonstrate the self-assembled planar chalcogenide nanostructured array with resonance enhanced light emission to create an all-dielectric optical metasurface, by taking advantage of the f…
We study the resonant enhancement of linear and nonlinear chiroptical effects in asymmetric silicon metasurfaces supporting multipolar Mie resonances and quasi-bound states in the continuum (quasi-BICs). We demonstrate theoretically and observe in experiment the pronounced linear circular dichroism at the quasi-BIC resonances. We further find that both local field enhancement and third-harmonic signal are large for Mie resonances and some quasi-BIC modes. We explain the selectivity of the nonlinear enhancement by employing the concept of critical coupling being more favorable for the modes wit…
We propose and analyse metasurface-bound invisible (non-scattering) partially open cavities where the inside field distribution can be engineered. It is demonstrated both theoretically and experimentally that the cavities exhibit unidirectional invisibility at the operating frequency with enhanced or suppressed field at different positions inside the cavity volume. Several examples of applications of the designed cavities are proposed and analyzed, in particular, cloaking sensors and obstacles, enhancement of emission, and "invisible waveguides". The non-scattering mode excited in the proposed…
