arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2006.15742cond-mat.softcond-mat.mtrl-sci
收藏

流动诱导分子排列对polymer界面焊接及强度的影响

Effect of flow-induced molecular alignment on welding and strength of polymer interfaces

Marco Aurelio Galvani Cunha, Mark O. Robbins

摘要:

通过熔丝制造形成的结构通常比用常规技术制成的结构弱得多,并且在连续层之间的焊接处失效。可能影响强度的一个因素是沉积材料的流动诱导对准。最近的工作表明,对齐减少了缠结密度,因此应该通过扩散加速焊接。在这里,粗粒度的分子模拟用于测试扩散和焊接强度的分子排列的效果。虽然标准的测量表明,随着对齐的缠结密度的降低,但垂直于界面的扩散速率或跨界面的缠结形成速率没有变化。链重定向的时间也保持等于平衡解缠结时间$τ_d$。尽管如此,机械试验的模拟表明,从对齐状态形成的焊缝较弱,直到几个$τ_d$。这不是因为焊缝本身较弱,而是因为焊缝附近的对齐材料比未对齐材料更弱。焊接系统的最大剪切强度和拉伸断裂能是相同的散装系统具有相同的对齐。

英文摘要:

Structures formed by fused filament fabrication are often substantially weaker than those made with conventional techniques, and fail at the welds between successive layers. One factor that may influence strength is flow-induced alignment of deposited material. Recent work suggests that alignment reduces the entanglement density and thus should accelerate welding by diffusion. Here, coarse-grained molecular simulations are used to test the effect of molecular alignment on diffusion and weld strength. While standard measures show a decrease of the entanglement density with alignment, there is no change in the rate of diffusion normal to the interface or the rate of formation of entanglements across the interface. The time for chain reorientation also remains equal to the equilibrium disentanglement time $τ_d$. Despite this, simulations of mechanical tests show that welds formed from aligned states are weaker until several $τ_d$. This is not because the weld itself is weaker, but because aligned material near the weld is weaker than unaligned material. The maximum shear strength and tensile fracture energy of welded systems are the same as bulk systems with the same alignment.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑