arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2401.00328physics.app-phcond-mat.soft
收藏

聚合物表面不稳定性诱导的LIPSS图案用于成肌细胞引导

LIPSS pattern induced by polymer surface instability for myoblast cell guidance

Nikola Slepickova Kasalkova, Veronika Juricova, Silvie Rimpelova, Dominik Fajstavr, Bara Frydlova, Zdenka Kolska, Vaclav Svorcik, Petr Slepicka

AI总结:

本研究利用KrF激光在PEEK和PEN聚合物上制备LIPSS图案,发现线性图案引导成肌细胞定向排列,而点状/球状图案增强细胞相容性,为生物医学表面改性提供新方法。

摘要:

本研究展示了使用KrF准分子激光在聚醚醚酮(PEEK)和聚萘二甲酸乙二醇酯(PEN)基底上制备多种周期性纳米结构(LIPSS——激光诱导周期性表面结构)的效率。通过将聚合物薄膜暴露在低于其烧蚀阈值的激光通量(4至16 mJcm-2,6000脉冲)下,我们研究了在光束入射角为0度和45度时的单相曝光以及两相曝光。原子力显微镜分析显示,激光处理后的样品含有独特的周期性图案,如波浪状、球状和豆荚状结构,每种结构均具有独特的表面粗糙度。此外,利用EDS和XPS等分析方法揭示了激光曝光引起的原子组成变化,特别关注C和O元素。值得注意的是,在几乎所有情况下,我们观察到样品表面的氧百分比增加。这种增加不仅导致与水的接触角减小,还降低了zeta电位值,从而表明改性样品具有增强的表面亲水性和改变的静电性质。最后但同样重要的是,对样品进行了生物相容性评估;我们研究了制备的复制品与小鼠成肌细胞(C2C12)的相互作用。确定了球状/点状结构对细胞生长的影响,并与原始或线性LIPSS图案化表面进行了比较。线性图案(LIPSS)诱导成肌细胞沿图案方向排列,而点状/球状图案相比LIPSS样品甚至增强了细胞相容性。

英文摘要:

The presented study highlights the efficiency of employing a KrF excimer laser to create diverse types of periodic nanostructures (LIPSS - laser induced periodic surface structures) on polyether ether ketone (PEEK) and polyethylene naphthalate (PEN) substrates. By exposing the polymer films below their ablation threshold to laser fluence ranging from 4 to 16 mJcm-2 at 6,000 pulses, we studied both single-phase exposure at beam incidence angles of 0deg and 45deg, and two-phase exposure. Atomic force microscopy analysis revealed that the laser-treated samples contained distinctive periodic patterns such as waves, globules, and pod-like structures each exhibiting unique surface roughness. Moreover, using analytical methods like EDS and XPS shed light on the changes in the atomic composition, specifically focusing on the C and O elements, as a result of laser exposure. Notably, in almost all cases, we observed an increase in oxygen percentage on the sample surfaces. This increase not only led to a decrease in the contact angle with water but also lowered the zeta potential value, thus showing that the modified samples have enhanced hydrophilicity of the surface and altered electrostatic properties. Last but not least, the samples were assessed for biocompatibility; we studied the interaction of the prepared replicates with mouse myoblasts (C2C12). The impact of globular/dot structures on the cell growth in comparison to pristine or linear LIPSS-patterned surfaces was determined. The linear pattern (LIPSS) induced the myoblast cell alignment along the pattern direction, while dot/globular pattern even enhanced the cytocompatibility compared to LIPSS samples.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑