Recent years have witnessed the rapid proliferation of backscatter technologies that realize the ubiquitous and long-term connectivity to empower smart cities and smart homes. Localizing such backscatter tags is crucial for IoT-based smart applications. However, current backscatter localization systems require prior knowledge of the site, either a map or landmarks with known positions, which is laborious for deployment. To empower universal localization service, this paper presents Rover, an indoor localization system that localizes multiple backscatter tags without any start-up cost using a robot equipped with inertial sensors. Rover runs in a joint optimization framework, fusing measurements from backscattered WiFi signals and inertial sensors to simultaneously estimate the locations of both the robot and the connected tags. Our design addresses practical issues including interference among multiple tags, real-time processing, as well as the data marginalization problem in dealing with degenerated motions. We prototype Rover using off-the-shelf WiFi chips and customized backscatter tags. Our experiments show that Rover achieves localization accuracies of 39.3 cm for the robot and 74.6 cm for the tags.
The combination of non-orthogonal multiple access (NOMA) using power-domain with backscatter sensor communication (BSC) is expected to connect a large-scale Internet of things (IoT) devices in future sixth-generation (6G) era. In this paper, we introduce a BSC in multi-cell IoT network, where a source in each cell transmits superimposed signal to its associated IoT devices using NOMA. The backscatter sensor tag (BST) also transmit data towards IoT devices by reflecting and modulating the superimposed signal of the source. A new optimization framework is provided that simultaneously optimizes t…
Non-orthogonal multiple access (NOMA) has emerged as a novel air interface technology for massive connectivity in sixth-generation (6G) era. The recent integration of NOMA in backscatter communication (BC) has triggered significant research interest due to its applications in low-powered Internet of Things (IoT) networks. However, the link security aspect of these networks has not been well investigated. This article provides a new optimization framework for improving the physical layer security of the NOMA ambient BC system. Our system model takes into account the simultaneous operation of NO…
In this paper, we study backscatter communication (BC) for power-limited devices that are connected to a network for the Internet of Things (IoT), where joint estimation and detection is carried out at a receiver to detect signals from a backscatter device (BD) with ambient orthogonal frequency division multiplexing (OFDM) carrier. In conventional BC, in order to avoid the difficulty of the carrier estimation, the energy detector is usually considered at a receiver at the cost of poor performance. To improve the performance, in this paper, we consider a novel approach that allows the carrier e…
A reconfigurable intelligent surface (RIS) enhanced non-orthogonal multiple access assisted backscatter communication (RIS-NOMABC) system is considered. A joint optimization problem over power reflection coefficients and phase shifts is formulated. To solve this non-convex problem, a low complexity algorithm is proposed by invoking the alternative optimization, successive convex approximation and manifold optimization algorithms. Numerical results corroborate that the proposed RIS-NOMABC system outperforms the conventional non-orthogonal multiple access assisted backscatter communication (NOMA…
Future Internet-of-Things (IoT) has high demand for energy-saving communications, especially in remote areas and smart cities. To meet this demand, we propose novel Unmanned Aerial Vehicle-assisted backscatter communications, where a UAV first collects data from multiple terrestrial backscattering tags via time division multiple access, and then flies into the coverage region of a terrestrial base station to upload its collected data to its associated base station. To determine the optimal UAV data collection location, we first analyze the system average outage probability, and then optimize t…
Outage Analysis of Backscatter-Based Ambient IoT Device Classes with Energy Buffering
Brunel University London（布鲁内尔伦敦大学）；University of New South Wales（新南威尔士大学）；Aalto University（阿尔托大学）；Southwest Jiaotong University（西南交通大学）；National Institute of Technology Calicut（卡利卡特国家技术学院）
Wireless powered backscatter communications (WPBC) is capable of implementing ultra-low-power communication, thus promising in the Internet of Things (IoT) networks. In practice, however, it is challenging to apply WPBC in large-scale IoT networks because of its short communication range. To address this challenge, this paper exploits an unmanned ground vehicle (UGV) to assist WPBC in large-scale IoT networks. In particular, we investigate the joint design of network planning and dynamic resource allocation of the access point (AP), tag reader, and UGV to minimize the total energy consumption.…
Ambient backscatter communication (AmBC) over orthogonal-frequency-division-multiplexing (OFDM) signals has recently been proposed as an appealing technique for low power Internet-of-Things (IoT) applications. The special spectrum structure of OFDM signals provides a range of flexibility in terms of bit-error-rate (BER) performance, data rate, and power consumption. In this paper, we study subcarrier-wise backscatter communication over ambient OFDM signals. This new AmBC is to exploit the special spectrum structure of OFDM to transmit data over its squeezed orthogonal subcarriers. We propose a…
Backscattering assisted wireless-powered communication combines ultralow-power backscatter transmitters with energy harvesting devices. This paper investigates the transmission mode selection problem of a hybrid relay that forwards data by switching between the active wireless-powered transmission and the passive ambient backscattering. It first presents a hybrid relay system model and derives its end-to-end success probability under theoretically optimal, but practically unrealistic, conditions. The transmission mode selection is then formulated as a stochastic two-armed bandit problem in a v…
In this paper, we develop a new framework called blockchain-based Radio Frequency (RF)-powered backscatter cognitive radio network. In the framework, IoT devices as secondary transmitters transmit their sensing data to a secondary gateway by using the RF-powered backscatter cognitive radio technology. The data collected at the gateway is then sent to a blockchain network for further verification, storage and processing. As such, the framework enables the IoT system to simultaneously optimize the spectrum usage and maximize the energy efficiency. Moreover, the framework ensures that the data co…
We consider an ambient backscatter communication (AmBC) system aided by an intelligent reflecting surface (IRS). The optimization of the IRS to assist AmBC is extremely difficult when there is no prior channel knowledge, for which no design solutions are currently available. We utilize a deep reinforcement learning-based framework to jointly optimize the IRS and reader beamforming, with no knowledge of the channels or ambient signal. We show that the proposed framework can facilitate effective AmBC communication with a detection performance comparable to several benchmarks under full channel k…
Sixth generation (6G) mobile networks may include new passive technologies, such as ambient backscatter communication or the use of reconfigurable intelligent surfaces, to avoid the emission of waves and the corresponding energy consumption. On the one hand, a reconfigurable intelligent surface improves the network performance by adding electronically controlled reflected paths in the radio propagation channel. On the other hand, in an ambient backscatter system, a device, named tag, communicates towards a reader by backscattering the waves of an ambient source (such as a TV tower). However, t…
In this paper, we introduce a backscatter assisted wirelessly powered mobile edge computing (MEC) network, where each edge user (EU) can offload task bits to the MEC server via hybrid harvest-then-transmit (HTT) and backscatter communications. In particular, considering a practical non-linear energy harvesting (EH) model and a partial offloading scheme at each EU, we propose a scheme to maximize the weighted sum computation bits of all the EUs by jointly optimizing the backscatter reflection coefficient and time, active transmission power and time, local computing frequency and execution time …
This paper studies a novel cooperation method in a two-user wireless powered communication network (WPCN), in which one hybrid access point (HAP) broadcasts wireless energy to two distributed wireless devices (WDs), while the WDs use the harvested energy to transmit their independent information to the HAP. To tackle the user unfairness problem caused by the near-far effect in WPCN, we allow the WD with the stronger WD-to-HAP channel to use part of its harvested energy to help relay the other weaker user's information to the HAP. In particular, we exploit the use of backscatter communication d…
Channel estimation is a challenging problem for realizing efficient ambient backscatter communication (AmBC) systems. In this letter, channel estimation in AmBC is modeled as a denoising problem and a convolutional neural network-based deep residual learning denoiser (CRLD) is developed to directly recover the channel coefficients from the received noisy pilot signals. To simultaneously exploit the spatial and temporal features of the pilot signals, a novel three-dimension (3D) denoising block is specifically designed to facilitate denoising in CRLD. In addition, we provide theoretical analysi…
One of the key challenges of the Internet of Things (IoT) is to sustainably power the large number of IoT devices in real-time. In this paper, we consider a wireless power transfer (WPT) scenario between an energy transmitter (ET) capable of retrodirective WPT and an energy receiver (ER) capable of ambient backscatter in the presence of an ambient source (AS). The ER requests WPT by backscattering signals from an AS towards the ET, which then retrodirectively beamforms an energy signal towards the ER. To remove the inherent direct-link ambient interference, we propose a scheme of ambient backs…
Future intelligent systems will consist of a massive number of battery-less sensors, where quick and accurate aggregation of sensor data will be of paramount importance. Over-the-air computation (AirComp) is a promising technology wherein sensors concurrently transmit their measurements over the wireless channel, and a reader receives the noisy version of a function of measurements due to the superposition property. A key challenge in AirComp is the accurate power alignment of individual transmissions, addressed previously by using conventional precoding methods. In this paper, we investigate …
We investigate a wireless power transfer (WPT)-based backscatter-mobile edge computing (MEC) network with a {reconfigurable intelligent surface (RIS)}.In this network, wireless devices (WDs) offload task bits and harvest energy, and they can switch between backscatter communication (BC) and active transmission (AT) modes. We exploit the RIS to maximize energy efficiency (EE). To this end, we optimize the time/power allocations, local computing frequencies, execution times, backscattering coefficients, and RIS phase shifts.} This goal results in a multi-objective optimization problem (MOOP) wit…
In this manuscript, we propose an alternating optimization framework to maximize the energy efficiency of a backscatter-enabled cooperative Non-orthogonal multiple access (NOMA) system by optimizing the transmit power of the source, power allocation coefficients (PAC), and power of the relay node under imperfect successive interference cancellation (SIC) decoding. A three-stage low-complexity energy-efficient alternating optimization algorithm is introduced which optimizes the transmit power, PAC, and relay power by considering the quality of service (QoS), power budget, and cooperation constr…
Sensing-Aware Backscatter Communications: A Survey on Envelope Stability, Waveform Design, and Selection Diversity
Rochester Institute of Technology（罗切斯特理工学院）；Cisco Systems Inc.（思科系统公司）；Obafemi Awolowo University（奥巴费米·阿沃洛沃大学）；The University of Texas at Dallas（德克萨斯大学达拉斯分校）
Bistatic backscatter communication (BackCom) allows passive tags to transmit over extended ranges, but at the cost of having carrier emitters either transmitting at high powers or being deployed very close to tags. In this paper, we examine how the presence of an intelligent reflecting surface (IRS) could benefit the bistatic BackCom system. We study the transmit power minimization problem at the carrier emitter, where its transmit beamforming vector is jointly optimized with the IRS phase shifts, whilst guaranteeing a required BackCom performance. A unique feature in this system setup is the …
Photovoltaic (PV) cells have the potential to serve as on-board power sources for low-power IoT devices. Here, we explore the use of perovskite solar cells to power Radio Frequency (RF) backscatter-based IoT devices with a few μW power demand. Perovskites are suitable for low-cost, high-performance, low-temperature processing, and flexible light energy harvesting that hold the possibility to significantly extend the range and lifetime of current backscatter techniques such as Radio Frequency Identification (RFID). For these reasons, perovskite solar cells are prominent candidates for future lo…
Symbiotic FAS Strategies for 6G UAVs Assisted Backscatter Networks
University of Benghazi（班加西大学）；Libyan Authority for Scientific Research（利比亚科学研究局）；University College London（伦敦大学学院）；King Fahd University of Petroleum and Minerals (KFUPM)（法赫德国王石油与矿物大学）
Unmanned aerial vehicle (UAV) communication has emerged as a prominent technology for emergency communications (e.g., natural disaster) in the Internet of Things (IoT) networks to enhance the ability of disaster prediction, damage assessment, and rescue operations promptly. A UAV can be deployed as a flying base station (BS) to collect data from time-constrained IoT devices and then transfer it to a ground gateway (GW). In general, the latency constraint at IoT devices and UAV's limited storage capacity highly hinder practical applications of UAV-assisted IoT networks. In this paper, {full-dup…
Wireless power transfer (WPT) using energy beamforming is a promising solution for low power Internet of Things (IoT) devices. In this work, we consider WPT from an energy transmitter (ET) employing retrodirective WPT using a large phased antenna array to an energy receiver (ER) capable of ambient backscatter. The advantage of retrodirective WPT is that no explicit channel estimation is needed at the ET and the use of ambient backscattering eliminates the need for active transmission at the ER. We propose a training sequence design, i.e., pattern of varying the reflection coefficient at the ER…
Reconfigurable intelligent surfaces (RISs) are software-controlled passive devices that can be used as relay (R) systems to reflect incoming signals from a source (S) to a destination (D) in a cooperative manner with optimum signal strength to improve the performance of wireless communication networks. The configurability and flexibility of an RIS deployed in an Internet-of-Things (IoT)-based network can enable network designers to devise stand-alone or cooperative configurations that have considerable advantages over conventional networks. In this paper, two new deep neural network (DNN)-assi…
We introduce a novel system setup where a backscatter device operates in the presence of an intelligent reflecting surface (IRS). In particular, we study the bistatic backscatter communication (BackCom) system assisted by an IRS. The phase shifts at the IRS are optimized jointly with the transmit beamforming vector of the carrier emitter to minimize the transmit power consumption at the carrier emitter whilst guaranteeing a required BackCom performance. The unique channel characteristics arising from multiple reflections at the IRS render the optimization problem highly non-convex. Therefore, …
This paper investigates the benefits of integrating reconfigurable intelligent surface (RIS) on minimizing the average sum age of information (AoI) in uplink non-orthogonal multiple access-based Internet-of-Things (IoT) networks. In this setup, an optimization problem is formulated to optimize the RIS configuration, the transmit power per IoT device and the clustering policy of IoT devices. The formulated problem is a mixed-integer non-convex one, and in order to solve it we obtain first the RIS configuration by adopting a semi-definite relaxation (SDR) approach. Afterwards, the joint power al…
In this manuscript, we present an energy-efficient alternating optimization framework based on the multi-antenna ambient backscatter communication (AmBSC) assisted cooperative non-orthogonal multiple access (NOMA) for next-generation (NG) internet-of-things (IoT) enabled communication networks. Specifically, the energy-efficiency maximization is achieved for the considered AmBSC-enabled multi-cluster cooperative IoT NOMA system by optimizing the active-beamforming vector and power-allocation coefficients (PAC) of IoT NOMA users at the transmitter, as well as passive-beamforming vector at the m…
Conventional channel estimation (CE) for Internet of Things (IoT) systems encounters challenges such as low spectral efficiency, high energy consumption, and blocked propagation paths. Although superimposed pilot-based CE schemes and the reconfigurable intelligent surface (RIS) could partially tackle these challenges, limited researches have been done for a systematic solution. In this paper, a superimposed pilot-based CE with the reconfigurable intelligent surface (RIS)-assisted mode is proposed and further enhanced the performance by networks. Specifically, at the user equipment (UE), the pi…
This paper presents a new deep reinforcement learning (DRL)-based approach to the trajectory planning and jamming rejection of an unmanned aerial vehicle (UAV) for the Internet-of-Things (IoT) applications. Jamming can prevent timely delivery of sensing data and reception of operation instructions. With the assistance of a reconfigurable intelligent surface (RIS), we propose to augment the radio environment, suppress jamming signals, and enhance the desired signals. The UAV is designed to learn its trajectory and the RIS configuration based solely on changes in its received data rate, using th…
