Efficient error-mitigation techniques demanding minimal resources is key to quantum information processing. We propose a generic protocol to mitigate quantum errors using detection-based quantum autoencoders. In our protocol, the quantum data are compressed into a latent subspace while leaving errors outside, the latter of which is then removed by a measurement and post-selection. Compared to previously developed methods, our protocol on the one hand requires no extra qubits, and on the other hand has a near-optimal denoising power, in which under reasonable requirements all errors detected outside of the latent subspace can be removed, while those inside the subspace cannot be removed by any means. Our detection-based quantum autoencoders are therefore particularly useful for near-term quantum devices in which controllable qubits are limited while noise reduction is important.
In the noisy intermediate-scale quantum (NISQ) era, quantum error mitigation will be a necessary tool to extract useful performance out of quantum devices. However, there is a big gap between the noise models often assumed by error mitigation techniques and the actual noise on quantum devices. As a consequence, there arises a gap between the theoretical expectations of the techniques and their everyday performance. Cloud users of quantum devices in particular, who often take the devices as they are, feel this gap the most. How should they parametrize their uncertainty in the usefulness of thes…
The inevitable accumulation of errors in near-future quantum devices represents a key obstacle in delivering practical quantum advantages, motivating the development of various quantum error-mitigation methods. Here, we derive fundamental bounds concerning how error-mitigation algorithms can reduce the computation error as a function of their sampling overhead. Our bounds place universal performance limits on a general error-mitigation protocol class. We use them to show (1) that the sampling overhead that ensures a certain computational accuracy for mitigating local depolarizing noise in laye…
Error mitigation has been one of the recently sought after methods to reduce the effects of noise when computation is performed on a noisy near-term quantum computer. Interest in simulating stochastic processes with quantum models gained popularity after being proven to require less memory than their classical counterparts. With previous work on quantum models focusing primarily on further compressing memory, this work branches out into the experimental scene; we aim to bridge the gap between theoretical quantum models and practical use with the inclusion of error mitigation methods. It is obs…
Solving optimization problems on near term quantum devices requires developing error mitigation techniques to cope with hardware decoherence and dephasing processes. We propose a mitigation technique based on the LHZ architecture. This architecture uses a redundant encoding of logical variables to solve optimization problems on fully programmable planar quantum chips. We discuss how this redundancy can be exploited to mitigate errors in quantum optimization algorithms. In the specific context of the quantum approximate optimization algorithm (QAOA), we show that errors can be significantly mit…
We report the observation and characterisation of a systematic error in the implementation of $U_3$ gates in the IBM quantum computers. The error appears as a consistent shift in one of the angles of the gate, whose magnitude does not correlate with IBM's cited errors calculated using Clifford randomized benchmarking. We propose a simple mitigation procedure, leading to an improvement in the observed value for the CHSH inequality, highlighting the utility of simple mitigation strategies for short-depth quantum circuits.
A general method to mitigate the effect of errors in quantum circuits is outlined. The method is developed in sight of characteristics that an ideal method should possess and to ameliorate an existing method which only mitigates state preparation and measurement errors. The method is tested on different IBM Q quantum devices, using randomly generated circuits with up to four qubits. A large majority of results show significant error mitigation.
Quantum computers are becoming increasingly accessible, and may soon outperform classical computers for useful tasks. However, qubit readout errors remain a significant hurdle to running quantum algorithms on current devices. We present a scheme to more efficiently mitigate these errors on quantum hardware and numerically show that our method consistently gives advantage over previous mitigation schemes. Our scheme removes biases in the readout errors allowing a general error model to be built with far fewer calibration measurements. Specifically, for reading out $n$-qubits we show a factor of…
Medium-scale quantum devices that integrate about hundreds of physical qubits are likely to be developed in the near future. However, such devices will lack the resources for realizing quantum fault tolerance. Therefore, the main challenge of exploring the advantage of quantum computation is to minimize the impact of device and control imperfections without encoding. Quantum error mitigation is a solution satisfying the requirement. Here, we demonstrate an error mitigation protocol based on gate set tomography and quasiprobability decomposition. One- and two-qubit circuits are tested on a supe…
Robust design under uncertainty in quantum error mitigation
Institute of Theoretical Physics, Jagiellonian University（雅盖隆大学理论物理研究所）；Szkoła Doktorska Nauk Ścisłych i Przyrodniczych, Uniwersytet Jagielloński（雅盖隆大学自然科学博士学院）；Mark Kac Center for Complex Systems Research, Jagiellonian University（雅盖隆大学马克·卡克复杂系统研究中心）；Information Sciences, Los Alamos National Laboratory（洛斯阿拉莫斯国家实验室信息科学部）；The Uncertainty Quantification Foundation（不确定性量化基金会）；Quantum Science Center（量子科学中心）；Theoretical Division, Los Alamos National Laboratory（洛斯阿拉莫斯国家实验室理论部）
The field of quantum computing has experienced a rapid expansion in recent years, with ongoing exploration of new technologies, a decrease in error rates, and a growth in the number of qubits available in quantum processors. However, near-term quantum algorithms are still unable to be induced without compounding consequential levels of noise, leading to non-trivial erroneous results. Quantum Error Correction and Mitigation are rapidly advancing areas of research in the quantum computing landscape, with a goal of reducing errors. IBM has recently emphasized that Quantum Error Mitigation is the …
While we expect quantum computers to surpass their classical counterparts in the future, current devices are prone to high error rates and techniques to minimise the impact of these errors are indispensable. There already exists a variety of error mitigation methods addressing this quantum noise that differ in effectiveness, and scalability. But for a more systematic and comprehensible approach we propose the introduction of modelling, in particular for representing cause-effect relations as well as for evaluating methods or combinations thereof with respect to a selection of relevant criteria…
Variational Quantum Algorithms (VQAs) are relatively robust to noise, but errors are still a significant detriment to VQAs on near-term quantum machines. It is imperative to employ error mitigation techniques to improve VQA fidelity. While existing error mitigation techniques built from theory provide substantial gains, the disconnect between theory and real machine execution limits their benefits. Thus, it is critical to optimize mitigation techniques to explicitly suit the target application as well as the noise characteristics of the target machine. We propose VAQEM, which dynamically tailo…
Several techniques have been recently introduced to mitigate errors in near-term quantum computers without the overhead required by quantum error correcting codes. While most of the focus has been on gate errors, measurement errors are significantly larger than gate errors on some platforms. A widely used {\it transition matrix error mitigation} (TMEM) technique uses measured transition probabilities between initial and final classical states to correct subsequently measured data. However from a rigorous perspective, the noisy measurement should be calibrated with perfectly prepared initial st…
In this work, we study and improve two leading error mitigation techniques, namely Probabilistic Error Cancellation (PEC) and Zero-Noise Extrapolation (ZNE), for estimating the expectation value of local observables. For PEC, we introduce a new estimator that takes into account the light cone of the unitary circuit with respect to a target local observable. Given a fixed error tolerance, the sampling overhead for the new estimator can be several orders of magnitude smaller than the standard PEC estimators. For ZNE, we also use light-cone arguments to establish an error bound that closely captu…
Noise in quantum hardware remains the biggest roadblock for the implementation of quantum computers. To fight the noise in the practical application of near-term quantum computers, instead of relying on quantum error correction which requires large qubit overhead, we turn to quantum error mitigation, in which we make use of extra measurements. Error extrapolation is an error mitigation technique that has been successfully implemented experimentally. Numerical simulation and heuristic arguments have indicated that exponential curves are effective for extrapolation in the large circuit limit wit…
Measurement error mitigation (MEM) techniques are postprocessing strategies to counteract systematic read-out errors on quantum computers (QC). Currently used MEM strategies face a tradeoff: methods that scale well with the number of qubits return negative probabilities, while those that guarantee a valid probability distribution are not scalable. Here, we present a scheme that addresses both of these issues. In particular, we present a scalable implementation of iterative Bayesian unfolding, a standard mitigation technique used in high-energy physics experiments. We demonstrate our method by …
To achieve the practical applications of near-term noisy quantum devices, low-cost ways to mitigate the noise damages in the devices are essential. In many applications, the noiseless state we want to prepare is often a pure state, which has recently inspired a range of purification-based quantum error mitigation proposals. The existing proposals either are limited to the suppressions of only the leading-order state preparation errors, or require a large number of long-range gates that might be challenging to implement depending on the qubit architecture. This article will provide an overview …
Quantum volume is a single-number metric which, loosely speaking, reports the number of usable qubits on a quantum computer. While improvements to the underlying hardware are a direct means of increasing quantum volume, the metric is "full-stack" and has also been increased by improvements to software, notably compilers. We extend this latter direction by demonstrating that error mitigation, a type of indirect compilation, increases the effective quantum volume of several quantum computers. Importantly, this increase occurs while taking the same number of overall samples. We encourage the adop…
We investigate the performance of error mitigation via measurement of conserved symmetries on near-term devices. We present two protocols to measure conserved symmetries during the bulk of an experiment, and develop a zero-cost post-processing protocol which is equivalent to a variant of the quantum subspace expansion. We develop methods for inserting global and local symetries into quantum algorithms, and for adjusting natural symmetries of the problem to boost their mitigation against different error channels. We demonstrate these techniques on two- and four-qubit simulations of the hydrogen…
Hardware-Efficient Error Mitigation and Shot-Efficient Sampling on IBM Quantum Hardware
Quantum Information and Computation Centre, Department of Physics and Department of Computer Science and Engineering, Indian Institute of Technology Jodhpur（印度焦特普尔理工学院）
Active quantum error correction is a central ingredient to achieve robust quantum processors. In this paper we investigate the potential of quantum machine learning for quantum error correction in a quantum memory. Specifically, we demonstrate how quantum neural networks, in the form of quantum autoencoders, can be trained to learn optimal strategies for active detection and correction of errors, including spatially correlated computational errors as well as qubit losses. We highlight that the denoising capabilities of quantum autoencoders are not limited to the protection of specific states b…
Quantum Minimal Learning Machine: A Fidelity-Based Approach to Error Mitigation
University of Jyväskylä, Faculty of Information Technology（于韦斯屈莱大学信息技术学院）；Aalto University, Department of Electronics and Nanoengineering（阿尔托大学电子与纳米工程系）
Quantum error mitigation is essential for computing on the noisy quantum computer with a limited number of qubits. In this paper, we propose a practical protocol of error mitigation by virtually purifying the quantum state without qubit overhead or requiring only one ancillary qubit. In dual-state purification, we effectively generate a purified state with increased fidelity using the erroneous state and its dual state, respectively, prepared with the noisy quantum circuit and the dual map of its inverse circuit. Combined with tomography purification, we can make sure that the final estimate o…
We consider Zero Noise Extrapolation (ZNE) as an error mitigation strategy in quantum metrology. It is shown that noise expansion can be systematically performed over sufficiently short time scales for general Markovian noise models described by the time homogeneous Lindblad master equation. This suggests that ZNE can be an effective, resource efficient error mitigation alternative when strategies employing full quantum error correcting codes are unavailable. The ZNE method is then applied quantum phase estimation in a Mach-Zehnder interferometer subject to photon losses. Numerical simulations…
Quantum error mitigation (QEM) has been proposed as an alternative method of quantum error correction to compensate errors in quantum systems without qubit overhead. While Markovian gate errors on digital quantum computers have been mainly considered previously, it is indispensable to discuss a relationship between QEM and non-Markovian errors because non-Markovian noise effects inevitably exist in most of the solid-state systems. In this work, we investigate the QEM for non-Markovian noise, and show that there is a clear relationship between costs for QEM and non-Markovian measures. As exampl…
In the era of quantum computing without full fault-tolerance, it is essential to suppress noise effects via the quantum error mitigation techniques to enhance the computational power of the quantum devices. One of the most effective noise-agnostic error mitigation schemes is the generalized quantum subspace expansion (GSE) method, which unifies various mitigation algorithms under the framework of the quantum subspace expansion. Specifically, the fault-subspace method, a subclass of GSE method, constructs an error-mitigated quantum state with copies of quantum states with different noise levels…
Two-qubit gates are important components of quantum computing. However, unwanted interactions between qubits (so-called parasitic gates) can be particularly problematic and degrade the performance of quantum applications. In this work, we present two software methods to mitigate parasitic two-qubit gate errors. The first approach is built upon the KAK decomposition and keeps the original unitary decomposition for the error-free native two-qubit gate. It counteracts a parasitic two-qubit gate by only applying single-qubit rotations and therefore has no two-qubit gate overhead. We show the optim…
