Low-temperature-differential (LTD) Stirling heat engines are able to operate with a small temperature difference between low-temperature heat reservoirs that exist in our daily lives, and thus they are considered to be an important sustainable energy technology. The author recently proposed a nonlinear dynamics model of an LTD kinematic Stirling heat engine to study the rotational mechanism of the engine [Y. Izumida, EPL \textbf{121}, 50004 (2018)]. This paper presents our study of the nonequilibrium thermodynamics analysis of this engine model, where a load torque against which the engine does work is introduced. We demonstrate that the engine's rotational state is in a quasi-linear response regime where the thermodynamic fluxes show a linear dependency on the thermodynamic forces. Significantly, it is found that the response coefficients of the quasi-linear relations are symmetric, which is similar to Onsager symmetry in linear irreversible thermodynamics. Based on these relations, we formulate the maximum efficiency of the engine. We also elucidate that the symmetry of the quasi-linear response coefficients emerges by reflecting the (anti-)reciprocity of the Onsager kinetic coefficients identified for the relaxation dynamics of the engine in the vicinity of an equilibrium state. We expect that the present study paves the way for developing nonequilibrium thermodynamics of autonomous heat engines described as a nonlinear dynamical system.
A Stirling engine made of a colloidal particle in contact with a nonequilibrium bath is considered and analyzed with the tools of stochastic energetics. We model the bath by non Gaussian persistent noise acting on the colloidal particle. Depending on the chosen definition of an isothermal transformation in this nonequilibrium setting, we find that either the energetics of the engine parallels that of its equilibrium counterpart or, in the simplest case, that it ends up being less efficient. Persistence, more than non Gaussian effects, are responsible for this result.
The paper develops the dynamics and thermodynamics of Stirling engines that run with temperature differences below 100 0C. The working gas pressure is analytically expressed using an alternative thermodynamic cycle. The shaft dynamics is studied using its rotational equation of motion. It is found that the initial volumes of the cold and hot working gas play a non-negligible role in the functioning of the engine.
We propose a quantum Stirling heat engine with an ensemble of harmonic oscillators as the working medium. We show that the efficiency of the harmonic oscillator quantum Stirling heat engine (HO-QSHE) at a given frequency can be maximized at a specific ratio of the temperatures of the thermal reservoirs. In the low temperature or equivalently high frequency limit of the harmonic oscillators, the efficiency of the HO-QSHE approaches the Carnot efficiency. Further, we analyse quantum Stirling heat engine with an ensemble of particle in box quantum systems as the working medium. Here both work and…
This paper describes simple modifications to a demonstration Stirling engine that allows one to make quantitative measurements of the Stirling cycle. First, we describe measurements of the $P$-$V$ diagram using an inexpensive pressure sensor and a common photogate. Then, as a supplement, the engine was run as a refrigerator by using a rotary tool to turn the flywheel of the engine. A small, but measurable, temperature difference developed across the body of the engine.
The low-temperature-differential (LTD) Stirling heat engine technology constitutes one of the important sustainable energy technologies. The basic question of how the rotational motion of the LTD Stirling heat engine is maintained or lost based on the temperature difference is thus a practically and physically important problem that needs to be clearly understood. Here, we approach this problem by proposing and investigating a minimal nonlinear dynamic model of an LTD kinematic Stirling heat engine. Our model is described as a driven nonlinear pendulum where the motive force is the temperature…
We use the general formulation of irreversible thermodynamics and study the minimally nonlinear irreversible model of heat engines operating between a time-varying hot heat source of finite size and a cold heat reservoir of infinite size. We find the criterion in which the optimized efficiency obtained by this minimally nonlinear irreversible heat engine can reach the reversible efficiency under the tight coupling condition: a condition of no heat leakage between the system and the reservoirs. We assume the rate of heat transfer from hot to cold heat reservoir obeys Fourier law and discuss phy…
We study the minimally nonlinear irreversible heat engines in which the time-reversal symmetry for the systems may b e broken. The expressions for the power and the efficiency are derived, in which the effects of the nonlinear terms due to dissipations are included. We show that, as within the linear responses, the minimally nonlinear irreversible heat engines enable attainment of Carnot efficiency at positive power. We also find that the Curzon-Ahlborn limit imposed on the efficiency at maximum power can be overcomed if the time-reversal symmetry is broken.
We derive the general relations between the maximum power, maximum efficiency and minimum dissipation for the irreversible heat engine in nonlinear response regime. In this context, we use the minimally nonlinear irreversible model and obtain the lower and upper bounds of the above relations for the asymmetric dissipation limits. These relations can be simplified further when the system possesses the time-reversal symmetry or anti-symmetry. We find that our results are the generalization of various such relations obtained earlier for different heat engines.
We derive the general probability distribution function of stochastic work for quantum Otto engines in which both the isochoric and driving processes are irreversible due to finite time duration. The time-dependent power fluctuations, average power, and thermodynamic efficiency are explicitly obtained for a complete cycle operating with an analytically solvable two-level system. We show that, there is a trade-off between efficiency (or power) and power fluctuations.
The Carnot theorem, one expression of the second law of thermodynamics, places a fundamental upper bound on the efficiency of heat engines operating between two heat baths. The Carnot theorem can be stated in a more generalized form for heat engines operating with multiple heat baths, where the maximum efficiency is achieved for reversible heat engines operating quasistatically between two heat baths. In this study, we determine the irreversible efficiency of heat engines operating with multiple heat baths in a linear response regime, i.e., under small temperature differences and a slow variat…
Colloidal heat engines are paradigmatic models to understand the conversion of heat into work in a noisy environment - a domain where biological and synthetic nano/micro machines function. While the operation of these engines across thermal baths is well-understood, how they function across baths with noise statistics that is non-Gaussian and also lacks memory, the simplest departure from equilibrium, remains unclear. Here we quantified the performance of a colloidal Stirling engine operating between an engineered \textit{memoryless} non-Gaussian bath and a Gaussian one. In the quasistatic lim…
Nonequilibrium thermodynamics of populations of weakly-coupled low-temperature-differential Stirling engines with synchronous and asynchronous transitions
The efficiency at maximum power (EMP) of irreversible Carnot-like heat engines is investigated based on the weak endoreversible assumption and the phenomenologically irreversible thermodynamics. It is found that the weak endoreversible assumption can reduce to the conventional one for the heat engines working at maximum power. Carnot-like heat engines are classified into three types (linear, superlinear, and sublinear) according to different characteristics of constitutive relations between the heat transfer rate and the thermodynamic force. The EMPs of Carnot-like heat engines are proved to b…
We formulate the work output and efficiency for linear irreversible heat engines working between a finite-sized hot heat source and an infinite-sized cold heat reservoir until the total system reaches the final thermal equilibrium state with a uniform temperature. We prove that when the heat engines operate at the maximum power under the tight-coupling condition without heat leakage the work output is just half of the exergy, which is known as the maximum available work extracted from a heat source. As a consequence, the corresponding efficiency is also half of its quasistatic counterpart.
We propose the minimally nonlinear irreversible heat engine as a new general theoretical model to study the efficiency at the maximum power $η^*$ of heat engines operating between the hot heat reservoir at the temperature $T_h$ and the cold one at $T_c$ ($T_c \le T_h $). Our model is based on the extended Onsager relations with a new nonlinear term meaning the power dissipation. In this model, we show that $η^*$ is bounded from the upper side by a function of the Carnot efficiency $η_C\equiv 1-T_c/T_h$ as $η^*\le η_C/(2-η_C)$. We demonstrate the validity of our theory by showing that the low-d…
In the recent progress in nonequilibrium thermodynamics, information has been recognized as a kind of thermodynamic resource that can drive thermodynamic current without any direct energy injection. In this paper, we establish the framework of linear irreversible thermodynamics for a broad class of autonomous information processing. In particular, we prove that the Onsager reciprocity holds true with information: The linear response matrix is well-defined, and is shown symmetric with both of the information affinity and the conventional thermodynamic affinity. As an application, we derive a un…
In existing linear response theories for adiabatically driven cyclic heat engines, Onsager symmetry is identified only phenomenologically, and a relation between global and local Onsager coefficients, defined over one cycle and at any instant of a cycle, respectively, is not derived. To address this limitation, we develop a linear response theory for the speed of adiabatically changing parameters and temperature differences in generic Gaussian heat engines obeying Fokker--Planck dynamics. We establish a hierarchical relationship between the global linear response relations, defined over one cy…
We develop an alternative thermodynamic cycle for the Stirling machine, where the polytropic process plays a central role. Analytical expressions for pressure and temperatures of the working gas are obtained as a function of the volume and the parameter which characterizes the polytropic process. This approach achieves a closer agreement with the experimental pressure-volume diagram and can be adapted to any type of the Stirling engine.
Artificial micro heat engines are prototypical models to explore and elucidate the mechanisms of energy transduction in a regime that is dominated by fluctuations [1-2]. Micro heat engines realized hitherto mimicked their macroscopic counterparts and operated between reservoirs that were effectively thermal [3-7]. For such reservoirs, temperature is a well-defined state variable and stochastic thermodynamics provides a precise framework for quantifying engine performance [8-9]. It remains unclear whether these concepts readily carry over to situations where the reservoirs are out-of-equilibriu…
The aim of this paper is to determine lost works in a molecular engine and compare results with macro (classical) heat engines. Firstly, irreversible thermodynamics are reviewed for macro and molecular cycles. Secondly, irreversible thermodynamics approaches are applied for a quantum heat engine with -1/2 spin system. Finally, lost works are determined for considered system and results show that macro and molecular heat engines obey same limitations. Moreover, a quantum thermodynamic approach is suggested in order to explain the results previously obtained from an atomic viewpoint.
We consider the efficiency at maximum power of a quantum Otto engine, which uses a spin or a harmonic system as its working substance and works between two heat reservoirs at constant temperatures $T_h$ and $T_c$ $ (<T_h)$. Although the spin-$1/2$ system behaves quite differently from the harmonic system in that they obey two typical quantum statistics, the efficiencies at maximum power based on these two different kinds of quantum systems are bounded from the upper side by the same expression of the efficiency at maximum power: $η_{mp}\leqη_+\equiv η_C^2/[η_C-(1-η_C)\ln(1-η_C)]$, with $η_C=1-…
We analyse non-equilibrium Carnot-like cycles built with a colloidal particle in a harmonic trap, which is immersed in a fluid that acts as a heat bath. Our analysis is carried out in the overdamped regime. The cycle comprises four branches: two isothermal processes and two \textit{locally} adiabatic ones. In the latter, both the temperature of the bath and the stiffness of the harmonic trap vary in time, but in such a way that the average heat vanishes for all times. All branches are swept at a finite rate and, therefore, the corresponding processes are irreversible, not quasi-static. Specifi…
The efficiency at maximum power output of linear irreversible Carnot-like heat engines is investigated based on the assumption that the rate of irreversible entropy production of working substance in each "isothermal" process is a quadratic form of heat exchange rate between the working substance and the reservoir. It is found that the maximum power output corresponds to minimizing the irreversible entropy production in two "isothermal" processes of the Carnot-like cycle, and that the efficiency at maximum power output has the form as $η_{mP}={η_C}/(2-γη_C)$ where $η_C$ is the Carnot efficienc…
The Carnot-like heat engines are classified into three types (normal-, sub- and super-dissipative) according to relations between the minimum irreversible entropy production in the "isothermal" processes and the time for completing those processes. The efficiencies at maximum power of normal-, sub- and super-dissipative Carnot-like heat engines are proved to be bounded between $η_C/2$ and $η_C/(2-η_C)$, $η_C /2$ and $η_C$, 0 and $η_C/(2-η_C)$, respectively. These bounds are also shared by linear, sub- and super-linear irreversible Carnot-like engines [Tu and Wang, Europhys. Lett. 98, 40001 (20…
A typical model for a gyrating engine consists of an inertial wheel powered by an energy source that generates an angle-dependent torque. Examples of such engines include a pendulum with an externally applied torque, Stirling engines, and the Brownian gyrating engine. Variations in the torque are averaged out by the inertia of the system to produce limit cycle oscillations. While torque generating mechanisms are also ubiquitous in the biological world, where they typically feed on chemical gradients, inertia is not a property that one naturally associates with such processes. In the present wo…
We formulate an endoreversible finite-time Carnot cycle model based on the assumptions of local equilibrium and constant energy flux, where the efficiency and the power are expressed in terms of the thermodynamic variables of the working substance. By analyzing the entropy production rate caused by the heat transfer in each isothermal process during the cycle, and using an endoreversible condition applied to the linear response regime, we identify the thermodynamic flux and force of the present system and obtain a linear relation that connects them. We calculate the efficiency at maximum power…
Even though irreversibility is one of the major hallmarks of any real life process, an actual understanding of irreversible processes remains still mostly semiempirical. In this paper we formulate a thermodynamic uncertainty principle for irreversible heat engines operating with an ideal gas as a working medium. In particular, we show that the time needed to run through such an irreversible cycle multiplied by the irreversible work lost in the cycle, is bounded from below by an irreducible and process-dependent constant that has the dimension of an action. The constant in question depends on a…
We model a Brownian heat engine as a Brownian particle that hops in a periodic ratchet potential where the ratchet potential is coupled with a linearly decreasing background temperature. It is shown that the efficiency of such Brownian heat engine is far from Carnot efficiency even at quaistatic limit. At quasistatic limit, the efficiency of the heat engine approaches the efficiency of endoreversible engine $η=1-\sqrt{{T_{c}/T_{h}}}$ \cite{c18}. On the other hand, the maximum power efficiency of the engine approaches $η^{MAX}=1-({T_{c}/T_{h}})^{1\over 4}$. Moreover, the dependence of the curre…
In thermodynamics, there exists a conventional belief that "the Carnot efficiency is reachable only when a process is reversible." However, there is no theorem proving that the Carnot efficiency is unattainable in an irreversible process. Here, we show that the Carnot efficiency is reachable in an irreversible process through investigation of the Feynman-Smoluchowski ratchet (FSR). We also show that it is possible to enhance the efficiency by increasing the irreversibility. Our result opens a new possibility of designing an efficient heat engine in a highly irreversible process and also answer…
Stochastic thermodynamics has revolutionized our understanding of heat engines operating in finite time. Recently, numerous studies have considered the optimal operation of thermodynamic cycles acting as heat engines with a given profile in thermodynamic space (e.g. $P-V$ space in classical thermodynamics), with a particular focus on the Carnot engine. In this work, we use the lens of thermodynamic geometry to explore the full space of thermodynamic cycles with continuously-varying bath temperature in search of optimally shaped cycles acting in the slow-driving regime. We apply classical isope…
We present results obtained by using nonlinear irreversible models for heat devices. In particular, we focus on the global performance characteristics, the maximum efficiency and the efficiency at maximum power regimes for heat engines, and the maximum coefficient of performance (COP) and the COP at maximum cooling power regimes for refrigerators. We analyze the key role played by the interplay between irreversibilities coming from heat leaks and internal dissipations. We also discuss the relationship between these results and those obtained by different models.
Building on our earlier work (Proesmans et. al., Phys.~Rev.~X \textbf{6} (2016), 041010), we introduce the underdamped Brownian duet as a prototype model of a dissipative system or of a work-to-work engine. Several recent advances from the theory of stochastic thermodynamics are illustrated with explicit analytic calculations and corresponding Langevin simulations. In particular, we discuss Onsager-Casimir symmetry, the trade-off relations between power, efficiency and dissipation, and stochastic efficiency.
We examine a quantum heat engine with an interacting many-body working medium consisting of the long-range Kitaev chain to explore the role of long-range interactions in the performance of the quantum engine. By analytically studying two type of thermodynamic cycles, namely Otto cycle and Stirling cycle, we demonstrate that the work output and efficiency of long-range interacting heat engine can be boosted by long-range interactions, in comparison to the short-range counterpart. We further show that in the Otto cycle, there exist an optimal condition for which the largest enhancement of work o…
We apply the model of minimally nonlinear irreversible heat engines developed by Izumida and Okuda [EPL {\bf 97}, 10004 (2012)] to refrigerators. The model assumes extended Onsager relations including a new nonlinear term accounting for dissipation effects. The bounds for the optimized regime under an appropriate figure of merit and the tight-coupling condition are analyzed and successfully compared with those obtained previously for low-dissipation Carnot refrigerators in the finite-time thermodynamics framework. Besides, we study the bounds for the nontight-coupling case numerically. We also…
In the present work, a power law dissipative Carnot like heat engine cycle of two irreversible isothermal and two irreversible adiabatic processes with finite time non-adiabatic dissipation is considered and the efficiency under two optimization criteria $\dotΩ$ figure of merit and efficient power, $χ_{ep}$ is studied. The generalized extreme bounds of the optimized efficiency under the above said optimization criteria are obtained. The lower and upper bounds of the efficiency for the low dissipation Carnot-like heat engine under these optimization criteria are obtained with dissipation level …
Several authors have proposed out of equilibrium thermal engines models, allowing optimization processes involving a trade off between the power output of the engine and its dissipation. These operating regimes are achieved by using objective functions such as the ecological function ($EF$). In order to measure the quality of the balance between these characteristic functions, it was proposed a relationship where power output and dissipation are evaluated in the above mentioned $EF$-regime and they are compared with respect to its values at the regime of maximum power output. We called this re…
The autonomous heat engine is a model system of autonomous nonequilibrium systems like biological cells, exploiting nonequilibrium flow for operations. As the Carnot engine has essentially contributed to the equilibrium thermodynamics, autonomous heat engine is expected to play a critical role in the challenge of constructing nonequilibrium thermodynamics. However, the high complexity of the engine involving an intricate coupling among heat, gas flow, and mechanics has prevented simple modeling. Here, we experimentally characterized the nonequilibrium dynamics and thermodynamics of a low-tempe…
Bosonic Working Media in a Frustrated Rhombi Chain: Otto and Stirling Cycles from Flat Bands, Caging, and Flux Control
Facultad de Ingeniería, Universidad San Sebastián（圣塞巴斯蒂安大学工程学院）；Departamento de Física, Universidad Técnica Federico Santa María（智利技术费德里科·萨马拉大学物理系）；Department of Physics, Universitat Autònoma de Barcelona（巴塞罗那自治大学物理系）；Instituto de Física, Pontificia Universidad Católica de Valparaíso（天主教瓦尔帕莱索大学物理研究所）；Physical and Computational Sciences,Pacific Northwest National Laboratory（太平洋西北国家实验室物理与计算科学部）；Departamento de Física, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile（智利大学物理与数学科学学院物理系）
The topic of microscopic heat engine has undergone intensive research in recent years. Microscopic heat engines can exploit thermal as well as active fluctuations to extract thermodynamic work. We investigate the properties of a microscopic Stirling's engine that uses an active (self-propelling) particle as a working substance, in contact with two thermal baths. It is shown that the presence of activity leads to an enhanced performance of the engine. The efficiency can be improved by increasing the activity strength for all cycle time, including the non-quasistatic regime. We verify that the a…
We discuss the efficiency of a heat engine operating in a nonequilibrium steady state maintained by two heat reservoirs. Within the general framework of linear irreversible thermodynamics we derive a universal upper bound on the efficiency of the engine operating at arbitrary fixed power. Furthermore, we show that a slight decrease of the power below its maximal value can lead to a significant gain in efficiency. The presented analysis yields the exact expression for this gain and the corresponding upper bound.
