We model a Brownian heat engine as a Brownian particle that hops in a periodic ratchet potential where the ratchet potential is coupled with a linearly decreasing background temperature. It is shown that the efficiency of such Brownian heat engine is far from Carnot efficiency even at quaistatic limit. At quasistatic limit, the efficiency of the heat engine approaches the efficiency of endoreversible engine $η=1-\sqrt{{T_{c}/T_{h}}}$ \cite{c18}. On the other hand, the maximum power efficiency of the engine approaches $η^{MAX}=1-({T_{c}/T_{h}})^{1\over 4}$. Moreover, the dependence of the current as well as the efficiency on the model parameters is explored analytically by omitting the heat exchange via the kinetic energy. In this case we show that the optimized efficiency always lies between the efficiently at quaistatic limit and the efficiency at maximum power. On the other hand, the efficiency at maximum power is always less than the optimized efficiency since the fast motion of the particle comes at the expense of the energy cost. The role of time on the performance of the motor is also explored via numerical simulations. Our numerical results depict that the time $t$ as well as the external load dictate the direction of the particle velocity. Moreover the performance of the heat engine improves with time. At large $t$ (steady state),the velocity, the efficiency and the coefficient of performance of the refrigerator attain their maximum value.
Building on our earlier work (Proesmans et. al., Phys.~Rev.~X \textbf{6} (2016), 041010), we introduce the underdamped Brownian duet as a prototype model of a dissipative system or of a work-to-work engine. Several recent advances from the theory of stochastic thermodynamics are illustrated with explicit analytic calculations and corresponding Langevin simulations. In particular, we discuss Onsager-Casimir symmetry, the trade-off relations between power, efficiency and dissipation, and stochastic efficiency.
We use the general formulation of irreversible thermodynamics and study the minimally nonlinear irreversible model of heat engines operating between a time-varying hot heat source of finite size and a cold heat reservoir of infinite size. We find the criterion in which the optimized efficiency obtained by this minimally nonlinear irreversible heat engine can reach the reversible efficiency under the tight coupling condition: a condition of no heat leakage between the system and the reservoirs. We assume the rate of heat transfer from hot to cold heat reservoir obeys Fourier law and discuss phy…
We study the minimally nonlinear irreversible heat engines in which the time-reversal symmetry for the systems may b e broken. The expressions for the power and the efficiency are derived, in which the effects of the nonlinear terms due to dissipations are included. We show that, as within the linear responses, the minimally nonlinear irreversible heat engines enable attainment of Carnot efficiency at positive power. We also find that the Curzon-Ahlborn limit imposed on the efficiency at maximum power can be overcomed if the time-reversal symmetry is broken.
We derive the general relations between the maximum power, maximum efficiency and minimum dissipation for the irreversible heat engine in nonlinear response regime. In this context, we use the minimally nonlinear irreversible model and obtain the lower and upper bounds of the above relations for the asymmetric dissipation limits. These relations can be simplified further when the system possesses the time-reversal symmetry or anti-symmetry. We find that our results are the generalization of various such relations obtained earlier for different heat engines.
We derive the general probability distribution function of stochastic work for quantum Otto engines in which both the isochoric and driving processes are irreversible due to finite time duration. The time-dependent power fluctuations, average power, and thermodynamic efficiency are explicitly obtained for a complete cycle operating with an analytically solvable two-level system. We show that, there is a trade-off between efficiency (or power) and power fluctuations.
The Carnot theorem, one expression of the second law of thermodynamics, places a fundamental upper bound on the efficiency of heat engines operating between two heat baths. The Carnot theorem can be stated in a more generalized form for heat engines operating with multiple heat baths, where the maximum efficiency is achieved for reversible heat engines operating quasistatically between two heat baths. In this study, we determine the irreversible efficiency of heat engines operating with multiple heat baths in a linear response regime, i.e., under small temperature differences and a slow variat…
The efficiency at maximum power (EMP) of irreversible Carnot-like heat engines is investigated based on the weak endoreversible assumption and the phenomenologically irreversible thermodynamics. It is found that the weak endoreversible assumption can reduce to the conventional one for the heat engines working at maximum power. Carnot-like heat engines are classified into three types (linear, superlinear, and sublinear) according to different characteristics of constitutive relations between the heat transfer rate and the thermodynamic force. The EMPs of Carnot-like heat engines are proved to b…
We formulate the work output and efficiency for linear irreversible heat engines working between a finite-sized hot heat source and an infinite-sized cold heat reservoir until the total system reaches the final thermal equilibrium state with a uniform temperature. We prove that when the heat engines operate at the maximum power under the tight-coupling condition without heat leakage the work output is just half of the exergy, which is known as the maximum available work extracted from a heat source. As a consequence, the corresponding efficiency is also half of its quasistatic counterpart.
We propose the minimally nonlinear irreversible heat engine as a new general theoretical model to study the efficiency at the maximum power $η^*$ of heat engines operating between the hot heat reservoir at the temperature $T_h$ and the cold one at $T_c$ ($T_c \le T_h $). Our model is based on the extended Onsager relations with a new nonlinear term meaning the power dissipation. In this model, we show that $η^*$ is bounded from the upper side by a function of the Carnot efficiency $η_C\equiv 1-T_c/T_h$ as $η^*\le η_C/(2-η_C)$. We demonstrate the validity of our theory by showing that the low-d…
In the recent progress in nonequilibrium thermodynamics, information has been recognized as a kind of thermodynamic resource that can drive thermodynamic current without any direct energy injection. In this paper, we establish the framework of linear irreversible thermodynamics for a broad class of autonomous information processing. In particular, we prove that the Onsager reciprocity holds true with information: The linear response matrix is well-defined, and is shown symmetric with both of the information affinity and the conventional thermodynamic affinity. As an application, we derive a un…
In existing linear response theories for adiabatically driven cyclic heat engines, Onsager symmetry is identified only phenomenologically, and a relation between global and local Onsager coefficients, defined over one cycle and at any instant of a cycle, respectively, is not derived. To address this limitation, we develop a linear response theory for the speed of adiabatically changing parameters and temperature differences in generic Gaussian heat engines obeying Fokker--Planck dynamics. We establish a hierarchical relationship between the global linear response relations, defined over one cy…
Low-temperature-differential (LTD) Stirling heat engines are able to operate with a small temperature difference between low-temperature heat reservoirs that exist in our daily lives, and thus they are considered to be an important sustainable energy technology. The author recently proposed a nonlinear dynamics model of an LTD kinematic Stirling heat engine to study the rotational mechanism of the engine [Y. Izumida, EPL \textbf{121}, 50004 (2018)]. This paper presents our study of the nonequilibrium thermodynamics analysis of this engine model, where a load torque against which the engine doe…
The aim of this paper is to determine lost works in a molecular engine and compare results with macro (classical) heat engines. Firstly, irreversible thermodynamics are reviewed for macro and molecular cycles. Secondly, irreversible thermodynamics approaches are applied for a quantum heat engine with -1/2 spin system. Finally, lost works are determined for considered system and results show that macro and molecular heat engines obey same limitations. Moreover, a quantum thermodynamic approach is suggested in order to explain the results previously obtained from an atomic viewpoint.
We consider the efficiency at maximum power of a quantum Otto engine, which uses a spin or a harmonic system as its working substance and works between two heat reservoirs at constant temperatures $T_h$ and $T_c$ $ (<T_h)$. Although the spin-$1/2$ system behaves quite differently from the harmonic system in that they obey two typical quantum statistics, the efficiencies at maximum power based on these two different kinds of quantum systems are bounded from the upper side by the same expression of the efficiency at maximum power: $η_{mp}\leqη_+\equiv η_C^2/[η_C-(1-η_C)\ln(1-η_C)]$, with $η_C=1-…
We analyse non-equilibrium Carnot-like cycles built with a colloidal particle in a harmonic trap, which is immersed in a fluid that acts as a heat bath. Our analysis is carried out in the overdamped regime. The cycle comprises four branches: two isothermal processes and two \textit{locally} adiabatic ones. In the latter, both the temperature of the bath and the stiffness of the harmonic trap vary in time, but in such a way that the average heat vanishes for all times. All branches are swept at a finite rate and, therefore, the corresponding processes are irreversible, not quasi-static. Specifi…
Collections of non-Brownian particles suspended in a viscous fluid and subjected to oscillatory shear at very low Reynolds number have recently been shown to exhibit a remarkable dynamical phase transition separating reversible from irreversible behaviour as the strain amplitude or volume fraction are increased. We present a simple model for this phenomenon, based on which we argue that this transition lies in the universality class of the conserved DP models or, equivalently, the Manna model. This leads to predictions for the scaling behaviour of a large number of experimental observables. No…
The efficiency at maximum power output of linear irreversible Carnot-like heat engines is investigated based on the assumption that the rate of irreversible entropy production of working substance in each "isothermal" process is a quadratic form of heat exchange rate between the working substance and the reservoir. It is found that the maximum power output corresponds to minimizing the irreversible entropy production in two "isothermal" processes of the Carnot-like cycle, and that the efficiency at maximum power output has the form as $η_{mP}={η_C}/(2-γη_C)$ where $η_C$ is the Carnot efficienc…
The Carnot-like heat engines are classified into three types (normal-, sub- and super-dissipative) according to relations between the minimum irreversible entropy production in the "isothermal" processes and the time for completing those processes. The efficiencies at maximum power of normal-, sub- and super-dissipative Carnot-like heat engines are proved to be bounded between $η_C/2$ and $η_C/(2-η_C)$, $η_C /2$ and $η_C$, 0 and $η_C/(2-η_C)$, respectively. These bounds are also shared by linear, sub- and super-linear irreversible Carnot-like engines [Tu and Wang, Europhys. Lett. 98, 40001 (20…
We formulate an endoreversible finite-time Carnot cycle model based on the assumptions of local equilibrium and constant energy flux, where the efficiency and the power are expressed in terms of the thermodynamic variables of the working substance. By analyzing the entropy production rate caused by the heat transfer in each isothermal process during the cycle, and using an endoreversible condition applied to the linear response regime, we identify the thermodynamic flux and force of the present system and obtain a linear relation that connects them. We calculate the efficiency at maximum power…
Even though irreversibility is one of the major hallmarks of any real life process, an actual understanding of irreversible processes remains still mostly semiempirical. In this paper we formulate a thermodynamic uncertainty principle for irreversible heat engines operating with an ideal gas as a working medium. In particular, we show that the time needed to run through such an irreversible cycle multiplied by the irreversible work lost in the cycle, is bounded from below by an irreducible and process-dependent constant that has the dimension of an action. The constant in question depends on a…
A Brownian information engine is a device extracting a mechanical work from a single heat bath by exploiting the information on the state of a Brownian particle immersed in the bath. As for engines, it is important to find the optimal operating condition that yields the maximum extracted work or power. The optimal condition for a Brownian information engine with a finite cycle time $τ$ has been rarely studied because of the difficulty in finding the nonequilibrium steady state. In this study, we introduce a model for the Brownian information engine and develop an analytic formalism for its ste…
We report on a lossless information engine that converts nearly all available information from an error-free feedback protocol into mechanical work. Combining high-precision detection at resolution of 1 nm with ultrafast feedback control, the engine is tuned to extract the maximum work from information on the position of a Brownian particle. We show that the work produced by the engine achieves a bound set by a generalized second law of thermodynamics, demonstrating for the first time the sharpness of this bound. We validate a generalized Jarzynski equality for error-free feedback-controlled i…
Brownian information engines can extract work from thermal fluctuations by utilizing information. So far, the studies on Brownian information engines consider the system in a thermal bath; however, many processes in nature occur in a nonequilibrium setting, such as the suspensions of self-propelled microorganisms or cellular environments called an active bath. Here, we introduce an archetypal model for Maxwell-demon type cyclic Brownian information engine operating in a Gaussian correlated active bath. The active engine can extract more work than its thermal counterpart, exceeding the bound se…
In thermodynamics, there exists a conventional belief that "the Carnot efficiency is reachable only when a process is reversible." However, there is no theorem proving that the Carnot efficiency is unattainable in an irreversible process. Here, we show that the Carnot efficiency is reachable in an irreversible process through investigation of the Feynman-Smoluchowski ratchet (FSR). We also show that it is possible to enhance the efficiency by increasing the irreversibility. Our result opens a new possibility of designing an efficient heat engine in a highly irreversible process and also answer…
We present results obtained by using nonlinear irreversible models for heat devices. In particular, we focus on the global performance characteristics, the maximum efficiency and the efficiency at maximum power regimes for heat engines, and the maximum coefficient of performance (COP) and the COP at maximum cooling power regimes for refrigerators. We analyze the key role played by the interplay between irreversibilities coming from heat leaks and internal dissipations. We also discuss the relationship between these results and those obtained by different models.
Active Brownian engines rectify energy from reservoirs composed of self-propelling non-equilibrium molecules into work. We consider a class of such engines based on an underdamped Brownian particle trapped in a power-law potential. The energy they transform has thermodynamic properties of heat only if the non-equilibrium reservoir can be assigned a suitable effective temperature consistent with the second law and thus yielding an upper bound on the engine efficiency. The effective temperature exists if the total force exerted on the particle by the bath is not correlated with the particle posi…
Shortcuts to isothermality provide a powerful method to speed up quasistatic thermodynamic processes within finite-time manipulation. We employ the shortcut strategy to design and optimize Brownian heat engines, and formulate a geometric description of the energetics with the thermodynamic length. We obtain a tight and reachable bound of the output power, which is reached by the optimal protocol to vary the control parameters with a proper constant velocity of the thermodynamic length. Our results generalize the previous optimization in the highly underdamped and the overdamped regimes to the …
Micro-to-nano scale thermal devices that operate under large thermal fluctuations, are an active field of research where instead the average values, the full distributions of thermodynamic quantities are important. Here we study a model of stochastic heat engine consisting of a harmonically trapped Brownian particle driven by the time-periodic strength of the confinement, within two thermal baths of different temperatures. The particle follows two isotherms correspond to two baths and connected by two micro-adiabates. The microadiabaticity is implemented by conserving the phase space volume of…
We explore the transport features of a Brownian particle that walks in a periodic ratchet potential that is coupled with a spatially varying temperature background. Since the viscous friction of the medium decreases as the temperature of the medium increases, any reasonable exploration regarding the thermodynamic features of the Brownian engine should take into account the role of temperature on the viscosity of the fluid. In this work, we study this effect of temperature by considering a viscous friction that decreases exponentially as the background temperature increases. Our result depicts …
We perform an extensive analysis of passive as well as active micro-heat engines with different single-particle stochastic models. Using stochastic thermodynamics we calculate thermodynamic work, heat, entropy production and efficiency of passive and active Brownian heat engines analytically as well as numerically and compare them. We run the heat engines with a protocol for which the average thermodynamic quantities are calculated exactly for an arbitrary cycle time. We also discuss about the group of protocols for which exact non-quasistatic calculations can be done, completely in the passiv…
Stochastic thermodynamics has revolutionized our understanding of heat engines operating in finite time. Recently, numerous studies have considered the optimal operation of thermodynamic cycles acting as heat engines with a given profile in thermodynamic space (e.g. $P-V$ space in classical thermodynamics), with a particular focus on the Carnot engine. In this work, we use the lens of thermodynamic geometry to explore the full space of thermodynamic cycles with continuously-varying bath temperature in search of optimally shaped cycles acting in the slow-driving regime. We apply classical isope…
In the present work, a power law dissipative Carnot like heat engine cycle of two irreversible isothermal and two irreversible adiabatic processes with finite time non-adiabatic dissipation is considered and the efficiency under two optimization criteria $\dotΩ$ figure of merit and efficient power, $χ_{ep}$ is studied. The generalized extreme bounds of the optimized efficiency under the above said optimization criteria are obtained. The lower and upper bounds of the efficiency for the low dissipation Carnot-like heat engine under these optimization criteria are obtained with dissipation level …
We present a detailed theoretical and experimental analysis of Engineered Swift Equilibration (ESE) protocols applied to two hydrodynamically coupled colloids in optical traps. The second particle disturbs slightly (10% at most) the response to an ESE compression applied to a single particle. This effect is quantitatively explained by a model of hydrodynamic coupling. Then we design a coupled ESE protocol for the two particles, allowing the perfect control of one target particle while the second is enslaved to the first. The calibration errors and the limitations of the model are finally discu…
The energetics of a Brownian heat engine and heat pump driven by position dependent temperature, known as the Büttiker-Landauer heat engine and heat pump, is investigated by numerical simulations of the inertial Langevin equation. We identify parameter values for optimal performance of the heat engine and heat pump. Our results qualitatively differ from approaches based on the overdamped model. The behavior of the heat engine and heat pump, in the linear response regime is examined under finite time conditions and we find that the efficiency is lower than that of an endoreversible engine worki…
Recent advances in experimental control of colloidal systems have spurred a revolution in the production of mesoscale thermodynamic devices. Functional "textbook" engines, such as the Stirling and Carnot cycles, have been produced in colloidal systems where they operate far from equilibrium. Simultaneously, significant theoretical advances have been made in the design and analysis of such devices. Here, we use methods from thermodynamic geometry to characterize the optimal finite-time, nonequilibrium cyclic operation of the parametric harmonic oscillator contact with a time-varying heat bath, …
The Carnot cycle imposes a fundamental upper limit to the efficiency of a macroscopic motor operating between two thermal baths. However, this bound needs to be reinterpreted at microscopic scales, where molecular bio-motors and some artificial micro-engines operate. As described by stochastic thermodynamics, energy transfers in microscopic systems are random and thermal fluctuations induce transient decreases of entropy, allowing for possible violations of the Carnot limit. Despite its potential relevance for the development of a thermodynamics of small systems, an experimental study of micro…
Several authors have proposed out of equilibrium thermal engines models, allowing optimization processes involving a trade off between the power output of the engine and its dissipation. These operating regimes are achieved by using objective functions such as the ecological function ($EF$). In order to measure the quality of the balance between these characteristic functions, it was proposed a relationship where power output and dissipation are evaluated in the above mentioned $EF$-regime and they are compared with respect to its values at the regime of maximum power output. We called this re…
We propose a general framework to study transformations that drive an underdamped Brownian particle in contact with a thermal bath from an equilibrium state to a new one in an arbitrarily short time. To this end, we make use of a time and space-dependent potential, that plays a dual role: confine the particle, and manipulate the system. In the special case of an isothermal compression or decompression of a harmonically trapped particle, we derive explicit protocols that perform this quick transformation, following an inverse engineering method. We focus on the properties of these protocols, wh…
When do non-equilibrium forms of disordered energy qualify as heat? \textcolor{blue}{We address this question in the context of cyclically operating heat engines in contact with a non-equilibrium energy reservoir that defies the zeroth law of thermodynamics. To consistently address the latter as a heat bath requires the existence of a precise mapping to an equivalent cycle with an equilibrium bath at a time-dependent effective temperature. We identify the most general setup for which this can generically be ascertained and thoroughly discuss an analytically tractable, experimentally relevant s…
When a Brownian particle in contact with a heat bath at a constant temperature is controlled by a time-dependent harmonic potential, its distribution function can be rigorously derived from the Kramers equation with the consideration of the inertial effect of the Brownian particle. Based on this rigorous solution and the concept of shortcuts to adiabaticity, we construct a stochastic heat engine by employing the time-dependent harmonic potential to manipulate the Brownian particle to complete a thermodynamic cycle. We find that the efficiency at maximum power of this stochastic heat engine is …
We investigate stochastic thermodynamics of a two-particles Langevin system. Each particle is in contact with a heat bath at different temperatures $T_1$ and $T_2~(<T_1)$, respectively. Particles are trapped by a harmonic potential and driven by a linear external force. The system can act as an autonomous heat engine performing work against the external driving force. Linearity of the system enables us to examine thermodynamic properties of the engine analytically. We find that the efficiency of the engine at maximum power $η_{MP}$ is given by $η_{MP} = 1-\sqrt{T_2/T_1}$. This universal form h…
We investigate the efficiency at maximum power of an irreversible Carnot engine performing finite-time cycles between two reservoirs at temperatures $T_h$ and $T_c$ $(T_c<T_h)$, taking into account of internally dissipative friction in two "adiabatic" processes. In the frictionless case, the efficiencies at maximum power output are retrieved to be situated between $η_{_C}/$ and $η_{_C}/(2-η_{_C})$, with $η_{_C}=1-T_c/{T_h}$ being the Carnot efficiency. The strong limits of the dissipations in the hot and cold isothermal processes lead to the result that the efficiency at maximum power output a…
Achieving the Carnot efficiency at finite power is a challenging problem in heat engines due to the trade-off relation between efficiency and power that holds for general heat engines. It is pointed out that the Carnot efficiency at finite power may be achievable in the vanishing limit of the relaxation times of a system without breaking the trade-off relation. However, any explicit model of heat engines that realizes this scenario for arbitrary temperature difference has not been proposed. Here, we investigate an underdamped Brownian Carnot cycle where the finite-time adiabatic processes conn…
We discuss the efficiency of a heat engine operating in a nonequilibrium steady state maintained by two heat reservoirs. Within the general framework of linear irreversible thermodynamics we derive a universal upper bound on the efficiency of the engine operating at arbitrary fixed power. Furthermore, we show that a slight decrease of the power below its maximal value can lead to a significant gain in efficiency. The presented analysis yields the exact expression for this gain and the corresponding upper bound.
We review a series of experimental studies of the thermodynamics of nonequilibrium processes at the microscale. In particular, in these experiments we studied the fluctuations of the thermodynamic properties of a single optically-trapped microparticle immersed in water and in the presence of external random forces. In equilibrium, the fluctuations of the position of the particle can be described by an effective temperature that can be tuned up to thousands of Kelvins. Isothermal and non-isothermal thermodynamic processes that also involve changes in a control parameter were implemented by cont…
