The focus of this white paper is on machine learning (ML) in wireless communications. 6G wireless communication networks will be the backbone of the digital transformation of societies by providing ubiquitous, reliable, and near-instant wireless connectivity for humans and machines. Recent advances in ML research has led enable a wide range of novel technologies such as self-driving vehicles and voice assistants. Such innovation is possible as a result of the availability of advanced ML models, large datasets, and high computational power. On the other hand, the ever-increasing demand for connectivity will require a lot of innovation in 6G wireless networks, and ML tools will play a major role in solving problems in the wireless domain. In this paper, we provide an overview of the vision of how ML will impact the wireless communication systems. We first give an overview of the ML methods that have the highest potential to be used in wireless networks. Then, we discuss the problems that can be solved by using ML in various layers of the network such as the physical layer, medium access layer, and application layer. Zero-touch optimization of wireless networks using ML is another interesting aspect that is discussed in this paper. Finally, at the end of each section, important research questions that the section aims to answer are presented.
Federated learning becomes increasingly attractive in the areas of wireless communications and machine learning due to its powerful functions and potential applications. In contrast to other machine learning tools that require no communication resources, federated learning exploits communications between the central server and the distributed local clients to train and optimize a machine learning model. Therefore, how to efficiently assign limited communication resources to train a federated learning model becomes critical to performance optimization. On the other hand, federated learning, as …
Intelligent reconfigurable surface (IRS) is being seen as a promising technology for 6G wireless networks. The IRS can reconfigure the wireless propagation environment, which results in significant performance improvement of wireless communications. In this paper, we analyze the performance of bandwidth-efficient quadrature amplitude modulation (QAM) techniques for IRS-assisted wireless communications over Rayleigh fading channels. New closed-form expressions of the generic average symbol error rate (ASER) for rectangular QAM, square QAM and cross QAM schemes are derived. Moreover, simplified …
The roll-out of various emerging wireless services has triggered the need for the sixth-generation (6G) wireless networks to provide functions of target sensing, intelligent computing and information communication over the same radio spectrum. In this paper, we provide a unified framework integrating sensing, computing, and communication to optimize limited system resource for 6G wireless networks. In particular, two typical joint beamforming design algorithms are derived based on multi-objective optimization problems (MOOP) with the goals of the weighted overall performance maximization and t…
Wireless communications are envisioned to bring about dramatic changes in the future, with a variety of emerging applications, such as virtual reality (VR), Internet of things (IoT), etc., becoming a reality. However, these compelling applications have imposed many new challenges, including unknown channel models, low-latency requirement in large-scale super-dense networks, etc. The amazing success of deep learning (DL) in various fields, particularly in computer science, has recently stimulated increasing interest in applying it to address those challenges. Hence, in this review, a pair of do…
The recently commercialized fifth-generation (5G) wireless communication networks achieved many improvements, including air interface enhancement, spectrum expansion, and network intensification by several key technologies, such as massive multiple-input multiple-output (MIMO), millimeter-wave communications, and ultra-dense networking. Despite the deployment of 5G commercial systems, wireless communications is still facing many challenges to enable connected intelligence and a myriad of applications such as industrial Internet-of-things, autonomous systems, brain-computer interfaces, digital …
One of the most critical aspects of enabling next-generation wireless technologies is developing an accurate and consistent channel model to be validated effectively with the help of real-world measurements. From this point of view, remarkable research has recently been conducted to model propagation channels involving the modification of the wireless propagation environment through the inclusion of reconfigurable intelligent surfaces (RISs). This study mainly aims to present a vision on channel modeling strategies for the RIS-empowered communications systems considering the state-of-the-art c…
The demanding objectives for the future sixth generation (6G) of wireless communication networks have spurred recent research efforts on novel materials and radio-frequency front-end architectures for wireless connectivity, as well as revolutionary communication and computing paradigms. Among the pioneering candidate technologies for 6G belong the reconfigurable intelligent surfaces (RISs), which are artificial planar structures with integrated electronic circuits that can be programmed to manipulate the incoming electromagnetic field in a wide variety of functionalities. Incorporating RISs in…
A statistical characterization of the fundamental performance bounds of an intelligent reflective surface (IRS) intended for aiding wireless communications is presented. To this end, the outage probability, average symbol error probability, and achievable rate bounds are derived in closed-form. By virtue of asymptotic analysis in the high signal-to-noise ratio (SNR) regime, the achievable diversity order is derived. Thereby, we show that a diversity gain in the order of the number of passive reflective elements embedded within the IRS can be achieved with only controllable phase adjustments. T…
The purpose of Green Communications is to reduce the energy consumption of the communication system as much as possible without compromising the quality of service (QoS) for users. An effective approach for Green Wireless Communications is On-Demand strategy, which scales power consumption with the volume and location of user demand. Applying the On-Demand Communications model, we propose a novel scheme -- Wireless Resource Trading, which characterizes the trading relationship among different wireless resources for a given number of performance metrics. According to wireless resource trading r…
Terahertz communications are envisioned as a key technology for 6G, which requires 100+ Gbps data rates, 1-millisecond latency, among other performance metrics. As a fundamental wireless infrastructure, the THz communication can boost abundant promising applications, including next-generation WLAN systems like Tera-WiFi, THz wireless backhaul, as well as other long-awaited novel communication paradigms. Serving as a basis of efficient wireless communication and networking design, this paper highlights the key THz channel features and recent advancements in device technologies. In light of thes…
In recent years, techniques developed in artificial intelligence (AI), especially those in machine learning (ML), have been successfully applied in various areas, leading to a widespread belief that AI will collectively play an important role in future wireless communications. To accomplish the aspiration, we present nine challenges to be addressed by the interdisciplinary areas of AI/ML and wireless communications, with particular focus towards the sixth generation (6G) wireless networks. Specifically, this article classifies the nine challenges into computation in AI, distributed neural netw…
Zhejiang University（浙江大学）；North Carolina State University（北卡罗来纳州立大学）；Imperial College London（伦敦帝国理工学院）
As an efficient graph analytical tool, graph neural networks (GNNs) have special properties that are particularly fit for the characteristics and requirements of wireless communications, exhibiting good potential for the advancement of next-generation wireless communications. This article aims to provide a comprehensive overview of the interplay between GNNs and wireless communications, including GNNs for wireless communications (GNN4Com) and wireless communications for GNNs (Com4GNN). In particular, we discuss GNN4Com based on how graphical models are constructed and introduce Com4GNN with co…
Radio frequency (RF) energy transfer and harvesting has been intensively studied recently as a promising approach to significantly extend the lifetime of energy-constrained wireless networks. This technique has a great potential to provide relatively stable and continuous RF energy to devices wirelessly; it thus opened a new research paradigm, termed wireless-powered communication (WPC), which has raised many new research opportunities with wide applications. Among these, the design and analysis of cooperative schemes towards efficient WPC have attracted tremendous research interests nowadays.…
Physical-layer security (PLS) for industrial indoor terahertz (THz) wireless communication applications is considered. We use a similar model as being employed for additive white Gaussian noise (AWGN) wireless communication channels. A cell communication and a directed communication scenario are analyzed to illustrate the achievable semantic security guarantees for a wiretap channel with finite-blocklength THz-wireless communication links. We show that weakly directed transmitter (Alice) antennas, which allow cell-type communication with multiple legitimate receivers (Bobs) without adaptation …
The wireless communication systems has gone from different generations from SISO systems to MIMO systems. Bandwidth is one important constraint in wireless communication. In wireless communication, high data transmission rates are essential for the services like tripple play i.e. data, voice and video. At user end the capacity determines the quality of the communication systems. This paper aims to compare the different RF wireless communication systems like SISO, MISO, SIMO and MIMO systems on the capacity basis and explaining the concept as today, the wireless communication has evolved from 2…
We characterize the maximum achievable broadcast rate in a wireless network under various fading assumptions. Our result exhibits a duality between the performance achieved in this context by collaborative beamforming strategies and the number of degrees of freedom available in the network.
The ability to intelligently utilize resources to meet the need of growing diversity in services and user behavior marks the future of wireless communication systems. Intelligent wireless communications aims at enabling the system to perceive and assess the available resources, to autonomously learn to adapt to the perceived wireless environment, and to reconfigure its operating mode to maximize the utility of the available resources. The perception capability and reconfigurability are the essential features of cognitive radio while modern machine learning techniques project great potential in…
School of Information Science and Technology, ShanghaiTech University（上海科技大学信息科学与技术学院）
Given the fast growth of intelligent devices, it is expected that a large number of high-stake artificial intelligence (AI) applications, e.g., drones, autonomous cars, tactile robots, will be deployed at the edge of wireless networks in the near future. As such, the intelligent communication networks will be designed to leverage advanced wireless techniques and edge computing technologies to support AI-enabled applications at various end devices with limited communication, computation, hardware and energy resources. In this article, we shall present the principles of efficient deployment of m…
Wireless communication systems that include unmanned aerial vehicles (UAVs) promise to provide cost-effective wireless connectivity for devices without infrastructure coverage. Compared to terrestrial communications or those based on high-altitude platforms (HAPs), on-demand wireless systems with low-altitude UAVs are in general faster to deploy, more flexibly re-configured, and are likely to have better communication channels due to the presence of short-range line-of-sight (LoS) links. However, the utilization of highly mobile and energy-constrained UAVs for wireless communications also intr…
In recent years, wireless communication systems are expected to achieve more cost-efficient and sustainable operations by replacing conventional fixed power supplies such as batteries with energy harvesting (EH) devices, which could provide electric energy from renewable energy sources (e.g., solar and wind). Such EH power supplies, however, are random and instable in nature, and as a result impose new challenges on reliable communication design and have triggered substantial research interests in EH based wireless communications. Building upon existing works, in this article, we develop a gen…
Covert communication hides the transmission of a message from a watchful adversary while ensuring reliable information decoding at the receiver, providing enhanced security in wireless communications. In this letter, covert communication in the presence of a multi-antenna adversary and under delay constraints is considered. Under the assumption of quasi-static wireless fading channels, we analyze the effect of increasing the number of antennas employed at the adversary on the achievable throughput of covert communication. It is shown that in contrast to a single-antenna adversary, a slight inc…
Intelligent reflecting surface (IRS) has emerged as a key enabling technology to realize smart and reconfigurable radio environment for wireless communications, by digitally controlling the signal reflection via a large number of passive reflecting elements in real-time. Different from conventional wireless communication techniques that only adapt to but have no or limited control over dynamic wireless channels, IRS provides a new and cost-effective means to combat the wireless channel impairments in a proactive manner. However, despite its great potential, IRS faces new and unique challenges …
The main hurdle in the realization of dynamic spectrum access (DSA) systems from physical layer perspective is the reliable sensing of low power licensed users. One such scenario shows up in the unlicensed use of TV bands where the TV Band Devices (TVBDs) are required to sense extremely low power wireless microphones (WMs). The lack of technical standard among various wireless manufacturers and the resemblance of certain WM signals to narrow-band interference signals, such as spurious emissions, further aggravate the problem. Due to these uncertainties, it is extremely difficult to abstract th…
Two-way communication is a key feature in a smart grid. It is enabled by either powerline communication or wireless communication technologies. Utilizing both technologies can potentially enhance communication reliability, and many diversity combining schemes have been proposed. In this paper, we propose a flexible real-time testbed to evaluate diversity combining schemes over physical channels. The testbed provides essential parts of physical layers on which both powerline and wireless communications operate. The contributions of this paper are 1) design and implementation of a real-time test…
The performance of wireless communication is fundamentally constrained by the limited battery life of wireless devices, whose operations are frequently disrupted due to the need of manual battery replacement/recharging. The recent advance in radio frequency (RF) enabled wireless energy transfer (WET) technology provides an attractive solution named wireless powered communication (WPC), where the wireless devices are powered by dedicated wireless power transmitters to provide continuous and stable microwave energy over the air. As a key enabling technology for truly perpetual communications, WP…
In this paper, we investigate the resource allocation problem for D2D communications underlaying wireless powered communication networks, where multiple D2D pairs harvest energy from a power station equipped with multiple antennas and then transmit information signals simultaneously over the same spectrum resource. The aim is to maximize the sum throughput via joint time scheduling and power control, while satisfying the energy causality constraints. The formulated non-convex problem is first transformed into a nonlinear fractional programming problem with a tactful reformulation. Then, by lev…
This paper estimates the freshness of the information in a wireless relay communication system that employs simultaneous wireless information and power transfer (SWIPT) operating under ultra-reliable low-latency communication (URLLC) constraints. The Age of Information (AoI) metric calculates the time difference between the current time and the timestamp of the most recent update received by the receiver is used here to estimate the freshness of information. The short packet communication scheme is used to fulfil the reliability and latency requirements of the proposed wireless network and its…
As a paradigm to recover the sparse signal from a small set of linear measurements, compressed sensing (CS) has stimulated a great deal of interest in recent years. In order to apply the CS techniques to wireless communication systems, there are a number of things to know and also several issues to be considered. However, it is not easy to come up with simple and easy answers to the issues raised while carrying out research on CS. The main purpose of this paper is to provide essential knowledge and useful tips that wireless communication researchers need to know when designing CS-based wireles…
Intelligent reflecting surfaces (IRSs) tune wireless environments to increase spectrum and energy efficiencies. In view of much recent attention to the IRS concept as a promising technology for 6G wireless communications, we present a survey of IRSs in this paper. Specifically, we categorize recent research studies of IRSs as follows. For IRS-aided communications, the summary includes capacity/data rate analyses, power/spectral optimizations, channel estimation, deep learning-based design, and reliability analysis. Then we review IRSs implementations as well as the use of IRSs in secure commun…
Conventional wireless security assumes wireless communications are rightful and aims to protect them against malicious eavesdropping and jamming attacks. However, emerging infrastructure-free mobile communication networks are likely to be illegally used (e.g., by criminals or terrorists) but difficult to be monitored, thus imposing new challenges on the public security. To tackle this issue, this article presents a paradigm shift of wireless security to the surveillance and intervention of infrastructure-free suspicious and malicious wireless communications, by exploiting legitimate eavesdropp…
Next-generation wireless networks must enable emerging technologies such as augmented reality and connected autonomous vehicles via wide range of wireless services that span enhanced mobile broadband (eMBB), as well as ultra-reliable low-latency communication (URLLC). Existing wireless systems that solely rely on the scarce sub-6 GHz, microwave ($μ$W) frequency bands will be unable to meet such stringent and mixed service requirements for future wireless services due to spectrum scarcity. Meanwhile, operating at high-frequency millimeter wave (mmWave) bands is seen as an attractive solution, p…
We analyze and optimize a wireless system with energy transfer in the downlink and information transfer in the uplink, under quasi-static Nakagami-m fading. We consider ultra-reliable communication scenarios representative of the fifth-generation of wireless systems, with strict error and latency requirements. The error probability and delay are investigated, and an approximation for the former is given and validated through simulations. The numerical results demonstrate that there are optimum numbers of channels uses for both energy and information transfer for a given message length.
The growing role that artificial intelligence and specifically machine learning is playing in shaping the future of wireless communications has opened up many new and intriguing research directions. This paper motivates the research in the novel direction of \textit{vision-aided wireless communications}, which aims at leveraging visual sensory information in tackling wireless communication problems. Like any new research direction driven by machine learning, obtaining a development dataset poses the first and most important challenge to vision-aided wireless communications. This paper addresse…
Radiative wireless power transfer (WPT) is a promising technology to provide cost-effective and real-time power supplies to wireless devices. Although radiative WPT shares many similar characteristics with the extensively studied wireless information transfer or communication, they also differ significantly in terms of design objectives, transmitter/receiver architectures and hardware constraints, etc. In this article, we first give an overview on the various WPT technologies, the historical development of the radiative WPT technology and the main challenges in designing contemporary radiative…
The fundamental phenomenon widely known as multipath is unavoidable in wireless communication, and affects almost every element of modern wireless communication systems. The impact of multipath on the received signal depends on whether the delay spread (i.e., spread of time delays associated with different multipath components) is large or small relative to the signalling period of the wireless communication system. In narrowband systems, the delay spread is about one tenth (or less) of the signalling period. The delay spread and the signalling period of broadband systems are in the same order…
We model, demonstrate and characterize Dispersion Code Multiple Access (DCMA) and hence show the applicability of this purely analog and real-time multiple access scheme to high-speed wireless communications. We first mathematically describe DCMA and show the appropriateness of Chebyshev dispersion coding in this technology. We next provide an experimental proof-of-concept in a 2 X 2 DCMA system. Finally,we statistically characterize DCMA in terms of bandwidth, dispersive group delay swing, system dimension and signal-to-noise ratio.
In this letter, a novel wireless powered protocol is proposed to maximize the system throughput of an energy harvesting (EH) based cognitive radio network, while satisfying a minimum primary user rate requirement. For EH, we exploit both dedicated wireless power transfer from primary base station as well as ambient ones available due to wireless information transfer among primary and secondary users. Specifically, we prove convexity of the optimization problem and obtain semi-closed-form for globally optimal solution. Numerical results validate the analysis, and show an average performance imp…
Wireless communication at the terahertz (THz) frequency bands (0.1-10THz) is viewed as one of the cornerstones of tomorrow's 6G wireless systems. Owing to the large amount of available bandwidth, THz frequencies can potentially provide wireless capacity performance gains and enable high-resolution sensing. However, operating a wireless system at the THz-band is limited by a highly uncertain channel. Effectively, these channel limitations lead to unreliable intermittent links as a result of a short communication range, and a high susceptibility to blockage and molecular absorption. Consequently…
We discuss the performance of polar codes, the capacity-achieving channel codes, on wireless communication channel in this paper. By generalizing the definition of Bhattacharyya Parameter in discrete memoryless channel, we present the special expression of the parameter for Gaussian and Rayleigh fading the two continuous channels, including the recursive formulas and the initial values. We analyze the applications of polar codes with the defined parameter over Rayleigh fading channel by transmitting image and speech. By comparing with low density parity-check codes(LDPC) at the same cases, our…
Doppler effect is a fundamental phenomenon that appears in wave propagation, where a moving observer experiences dilation or contraction of wavelength of a wave. It also appears in radio frequency (RF) wireless communication when there exists a relative movement between the transmitter and the receiver, and is widely considered as a major impairment for reliable wireless communication. The current paper proposes Doppler Assisted Wireless Communication that exploits Doppler effect for co-channel interference mitigation. The proposed system also exploits the propagation environment and the netwo…
We analyze a cooperative wireless communication system with finite block length and finite battery energy, under quasi-static Rayleigh fading. Source and relay nodes are powered by a wireless energy transfer (WET) process, while using the harvested energy to feed their circuits, send pilot signals to estimate channels at receivers, and for wireless information transmission (WIT). Other power consumption sources beyond data transmission power are considered. The error probability is investigated under perfect/imperfect channel state information (CSI), while reaching accurate closed-form approxi…
Widely-deployed encryption-based security prevents unauthorized decoding, but does not ensure undetectability of communication. However, covert, or low probability of detection/intercept (LPD/LPI) communication is crucial in many scenarios ranging from covert military operations and the organization of social unrest, to privacy protection for users of wireless networks. In addition, encrypted data or even just the transmission of a signal can arouse suspicion, and even the most theoretically robust encryption can often be defeated by a determined adversary using non-computational methods such …
Recent advances in the fabrication and experimentation of Reconfigurable Intelligent Surfaces (RISs) have motivated the concept of the smart radio environment, according to which the propagation of information-bearing waveforms in the wireless medium is amenable to programmability. Although the vast majority of recent experimental research on RIS-empowered wireless communications gravitates around narrowband beamforming in quasi-free space, RISs are foreseen to revolutionize wideband wireless connectivity in dense urban as well as indoor scenarios, which are usually characterized as strongly r…
The extreme or maximum age of information (AoI) is analytically studied for wireless communication systems. In particular, a wireless powered single-antenna source node and a receiver (connected to the power grid) equipped with multiple antennas are considered when operated under independent Rayleigh-faded channels. Via the extreme value theory and its corresponding statistical features, we demonstrate that the extreme AoI converges to the Gumbel distribution whereas its corresponding parameters are obtained in straightforward closed-form expressions. Capitalizing on this result, the risk of t…
Wireless powered backscatter communications is an attractive technology for next-generation low-powered sensor networks such as the Internet of Things. However, backscattering suffers from collisions due to multiple simultaneous transmissions and a dyadic backscatter channel, which greatly attenuate the received signal at the reader. This letter deals with backscatter communications in sensor networks from a large-scale point-of-view and considers various collision resolution techniques: directional antennas, ultra-narrow band transmissions and successive interference cancellation. We derive a…
In this article, we overview intelligent reflecting surface (IRS)-empowered wireless communication systems. We first present the fundamentals of IRS-assisted wireless transmission. On this basis, we explore the integration of IRS with various advanced transmission technologies, such as millimeter wave, non-orthogonal multiple access, and physical layer security. Following this, we discuss the effects of hardware impairments and imperfect channel-state-information on the IRS system performance. Finally, we highlight several open issues to be addressed.
Multiple access technology played an important role in wireless communication in the last decades: it increases the capacity of the channel and allows different users to access the system simultaneously. However, the conventional multiple access technology, as originally designed for current human-centric wireless networks, is not scalable for future machine-centric wireless networks. Massive access (studied in the literature under such names as massive-device multiple access, unsourced massive random access, massive connectivity, massive machine-type communication, and many-access channels) e…
Zhejiang University（浙江大学）；North Carolina State University（北卡罗来纳州立大学）
Graph neural network (GNN) is an efficient neural network model for graph data and is widely used in different fields, including wireless communications. Different from other neural network models, GNN can be implemented in a decentralized manner with information exchanges among neighbors, making it a potentially powerful tool for decentralized control in wireless communication systems. The main bottleneck, however, is wireless channel impairments that deteriorate the prediction robustness of GNN. To overcome this obstacle, we analyze and enhance the robustness of the decentralized GNN in diff…
The reconfigurable intelligent surface (RIS) with low hardware cost and energy consumption has been recognized as a potential technique for future 6G communications to enhance coverage and capacity. To achieve this goal, accurate channel state information (CSI) in RIS assisted wireless communication system is essential for the joint beamforming at the base station (BS) and the RIS. However, channel estimation is challenging, since a large number of passive RIS elements cannot transmit, receive, or process signals. In the first part of this invited paper, we provide an overview of the fundament…
To increase the number of wireless devices, e.g., mobile or IoT terminals, cryptosystems are essential for secure communications. In this regard, random number generation is crucial because the appropriate function of cryptosystems relies on it to work properly. This paper proposes a true random number generator (TRNG) method capable of working in wireless communication systems. By embedding a TRNG in such systems, no additional analog circuits are required and working conditions can be limited as long as wireless communication systems are functioning properly, making TRNG method cost-effectiv…
This article summarizes recent contributions in the broad area of energy harvesting wireless communications. In particular, we provide the current state of the art for wireless networks composed of energy harvesting nodes, starting from the information-theoretic performance limits to transmission scheduling policies and resource allocation, medium access and networking issues. The emerging related area of energy transfer for self-sustaining energy harvesting wireless networks is considered in detail covering both energy cooperation aspects and simultaneous energy and information transfer. Vari…
