The two-dimensional (2D) semiconductor indium selenide (InSe) has attracted significant interest due its unique electronic band structure, high electron mobility and wide tunability of its band gap energy achieved by varying the layer thickness. All these features make 2D InSe a potential candidate for advanced electronic and optoelectronic applications. Here, we report on the discovery of new polymorphs of InSe with enhanced electronic properties. Using a global structure search that combines artificial swarm intelligence with first-principles energetic calculations, we identify polymorphs that consist of a centrosymmetric monolayer belonging to the point group D$_{3d}$, distinct from the well-known polymorphs based on the D$_{3h}$ monolayers that lack inversion symmetry. The new polymorphs are thermodynamically and kinetically stable, and exhibit a wider optical spectral response and larger electron mobilities compared to the known polymorphs. We discuss opportunities to synthesize these newly discovered polymorphs and viable routes to identify them by X-ray diffraction, Raman spectroscopy and second harmonic generation experiments.
Graphene like 2D materials have attracted tremendous attention in the field of photocatalytic water splitting. Indium Selenide (InSe) is one such potential material. Here, we report the effect of Tellurium on InSe monolayer for the photocatalytic water splitting by means of density functional calculations. The calculated bandgaps fall within the visible region of the solar spectrum indicating these materials could absorb a significant amount of solar light. Density of states calculations show that the covalent character is present between the atoms which is typical for the layered system. The …
Indium selenide compounds are promising materials for energy conversion, spintronic applications, and chemical sensing. However, it is difficult to grow stoichiometric indium selenide crystals due to the high equilibrium selenium vapor pressure and the complicated phase equilibrium system of indium selenide compounds. In this paper, we apply a novel and convenient crystal growth method, in which the saturated solution is grown by the application of a selenium vapor. In this method, selenium vapor at a pressure higher than the saturated vapor pressure is applied to molten indium, such that the …
Indium selenides for next-generation low-power computing devices
Sungkyunkwan University (SKKU)（成均馆大学）；Institute for Basic Science (IBS)（基础科学研究院）；University of Pennsylvania（宾夕法尼亚大学）；Air Force Research Laboratory（空军研究实验室）；AV Inc.（AV公司）
In this study, we report the mechanical properties and fracture mechanism of pre-cracked and defected InSe nanosheet samples using molecular dynamics (MD) simulations. We noticed that the failure of pre-cracked and defected InSe nanosheet is governed by brittle type fracture. Armchair directional bonds exhibit a greater resistance for crack propagation relative to the zigzag directional ones. Thus, fracture strength of the pre-cracked sheet is slightly higher for zigzag directional loading than that for armchair. We evaluated the limitation of the applicability of Griffith's criterion for sing…
Understanding and optimizing the properties of photoactive two-dimensional (2D) Van der Waals solids are crucial for developing optoelectronics applications. Here we present a detailed investigation of layer dependent photoconductive behavior of InSe based field-effect transistors (FETs). InSe based FETs with five different channel thickness (t, 20 nm < t < 100 nm) were investigated with a continuous laser source of λ = 658 nm (1.88 eV) over a wide range of illumination power of 22.8 nW < P < 1.29 μW. All the devices studied, showed signatures of photogating, however, our investigations sugges…
The effects of annealing and variation of temperature on the electrical and thermoelectric properties of e-beam evaporated InSe thin films has been investigated in details. The XRD study demonstrates that the as-deposited InSe thin films are amorphous while they become polycrystalline with the presence of In3Se4 phase after annealing. The SEM micrographs reveal that the surfaces of as-deposited films are smooth whereas they become non-uniform due to annealing. The heating and cooling cycles of the as-deposited films exhibit that the resistivity of the films shows an irreversible phase-transiti…
Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few um, and thicknesses ranging from 1 to 20 nm, with a max population centred at ~ 5 nm, corresponding to 4 Se-In-In-Se quaternary layers. We also show that no formation of further InSe-…
Here, we examine the influence of surface chemical reactivity toward ambient gases on the performance of nanodevices based on two-dimensional materials "beyond graphene" and novel topological phases of matter. While surface oxidation in ambient conditions was observed for silicene and phosphorene with subsequent reduction of the mobility of charge carriers, nanodevices with active channels of indium selenide, bismuth chalcogenides and transition-metal dichalcogenides are stable in air. However, air-exposed indium selenide suffers of p-type doping due to water decomposition on Se vacancies, whe…
We demonstrate the successive appearance of the exciton, biexciton, and P band of the exciton-exciton scattering with increasing excitation power in the photoluminescence of indium selenide layered crystals. The strict energy and momentum conservation rules of the P band are used to reexamine the exciton binding energy. The new value $\geq 20$ meV is markedly higher than the currently accepted 14 meV, being however well consistent with the robustness of excitons up to room temperature. A peak controlled by the Sommerfeld factor is found near the bandgap ($\sim 1.36$ eV), which puts the questio…
Atomically thin, two-dimensional (2D) indium selenide (InSe) has attracted considerable attention due to large tunability in the band gap (from 1.4 to 2.6 eV) and high carrier mobility. The intriguingly high dependence of band gap on layer thickness may lead to novel device applications, although its origin remains poorly understood, and generally attributed to quantum confinement effect. In this work, we demonstrate via first-principles calculations that strong interlayer coupling may be mainly responsible for this phenomenon, especially in the fewer-layer region, and it could also be an esse…
Van der Waals heterostructures formed by stacking different types of 2D materials are attracting increasing attention due to new emergent physical properties such as interlayer excitons. Recently synthesized atomically thin indium selenide (InSe) and antimony (Sb) individually exhibit interesting electronic properties such as high electron mobility in the former and high hole mobility in the latter. In this work, we present a first-principles investigation on the stability and electronic properties of ultrathin bilayer heterostructures composed of InSe and Sb single layers. The calculated elec…
In this paper, the completed investigation of a possible superconducting phase in monolayer indium selenide is determined using first-principles calculations for both the hole and electron doping systems. The hole-doped dependence of the Fermi surface is exclusively fundamental for monolayer InSe. It leads to the extensive modification of the Fermi surface from six separated pockets to two pockets by increasing the hole densities. For low hole doping levels of the system, below the Lifshitz transition point, superconductive critical temperatures $T_c \sim 55-75$ K are obtained within anisotrop…
Two-dimensional Indium Selenide (InSe) has attracted extensive attention recently due to its record-high charge carrier mobility and photoresponsivity in the fields of electronics and optoelectronics. Nevertheless, the mechanical properties of this material in the ultra-thin regime have not been investigated yet. Here, we present our efforts to determine the Young's modulus of thin InSe (~1-2 layers to ~40 layers) flakes experimentally by using buckling-based methodology. We find that the Young's modulus has a value of 23.1 +- 5.2 GPa, one of the lowest values reported up to date for crystalli…
Thermoelectric properties of monolayer indium selenide (InSe) are investigated by using Boltzman transport theory and first-principles calculations as a function of Fermi energy and crystal orientation. We find that the maximum power factor of p-type (n-type) monolayer InSe can be as large as 0.049 (0.043) W/K$^2$m at 300 K in the armchair direction. The excellent thermoelectric performance of monolayer InSe is attributed to both of its Seebeck coefficient and electrical conductivity. The large Seebeck coefficient originates from the moderate (about 2 eV) band gap of monolayer InSe as an indir…
Germanium selenide (GeSe) is a unique two-dimensional (2D) material showing various polymorphs stable at ambient condition. Recently, a new phase with a layered hexagonal lattice (γ-GeSe) was synthesized with ambient stability and extraordinary electronic conductivity even higher than graphite while its monolayer is semiconducting. In this work, via using first-principles derived force constants and Boltzmann transport theory we explore the lattice thermal conductivity (κ_l) of the monolayer γ-GeSe, together with a comparison with monolayer α-GeSe and β-GeSe. The κ_l of γ-phase is relatively l…
Most of the studied two-dimensional (2D) materials have been obtained by exfoliation of van der Waals crystals. Recently, there has been growing interest in fabricating synthetic 2D crystals which have no layered bulk analogues. These efforts have been focused mainly on the surface growth of molecules in high vacuum. Here, we report an approach to making 2D crystals of covalent solids by chemical conversion of van der Waals layers. As an example, we use 2D indium selenide (InSe) obtained by exfoliation and converted it by direct fluorination into indium fluoride (InF3), which has a non-layered…
In 2D-semiconductor-based field-effect transistors and optoelectronic devices, metal-semiconductor junctions are one of the crucial factors determining device performance. The Fermi-level (FL) pinning effect, which commonly caused by interfacial gap states, severely limits the tunability of junction characteristics, including barrier height and contact resistance. A tunneling contact scheme has been suggested to address the FL pinning issue in metal-2D-semiconductor junctions, whereas the experimental realization is still elusive. Here, we show that an oxidized-monolayer-enabled tunneling barr…
Driven by interactions due to the charge, spin, orbital, and lattice degrees of freedom, nanoscale inhomogeneity has emerged as a new theme for materials with novel properties near multiphase boundaries. As vividly demonstrated in complex metal oxides and chalcogenides, these microscopic phases are of great scientific and technological importance for research in high-temperature superconductors, colossal magnetoresistance effect, phase-change memories, and domain switching operations. Direct imaging on dielectric properties of these local phases, however, presents a big challenge for existing …
Two-dimensional (2D) indium monoselenide (InSe) has attracted significant attention as a III-VI two-dimensional semiconductor (2D) with a combination of favorable attributes from III-V semiconductors as well as van der Waals 2D transition metal dichalcogenides. Nevertheless, the large-area synthesis of phase-pure 2D InSe remains unattained due to the complexity of the binary In-Se system and the difficulties in promoting lateral growth. Here, we report the first polymorph-selective synthesis of epitaxial 2D InSe by metal-organic chemical deposition (MOCVD) over 2 inch diameter sapphire wafers.…
Layered indium selenides ($In_{2}Se_{3}$) have recently been discovered to host robust out-of-plane and in-plane ferroelectricity in the $α$ and $β$' phases, respectively. In this work, we utilise angle-resolved photoelectron spectroscopy to directly measure the electronic bandstructure of $β'-In_{2}Se_{3}$, and compare to hybrid density functional theory (DFT) calculations. In agreement with DFT, we find the band structure is highly two-dimensional, with negligible dispersion along the c-axis. Due to n-type doping we are able to observe the conduction band minima, and directly measure the min…
By using first-principles calculations, we investigated the effects of graphene/boron nitride (BN) encapsulation, surface functionalization by metallic elements (K, Al, Mg and typical transition metals) and molecules (tetracyanoquinodimethane (TCNQ) and tetracyanoethylene (TCNE)) on the electronic properties of layered indium selenide (InSe). It was found that an opposite trend of charge transfer is possible for graphene (donor) and BN (acceptor), which is dramatically different from phosphorene where both graphene and BN play the same role (donor). For InSe/BN heterostructure, a change of the…
