We propose a quantum state readout mechanism of a weakly coupled qubit in dispersive regime. The hybrid system consists of ferromagnetic insulator and a superconducting qubit in a microwave cavity. The enhancement of the measurement sensitivity is achieved by exerting torque on the ferromagnetic insulator magnetization, which compensates the damping of the system leading to an exceptional point. The proposed machanism allows to measure the qubit state either via the transmission of the cavity or the FMR signal of the magnetic material.
We analyze a readout scheme for Majorana qubits based on dispersive coupling to a resonator. We consider two variants of Majorana qubits: the Majorana transmon and the Majorana box qubit. In both cases, the qubit-resonator interaction can produce sizeable dispersive shifts in the MHz range for reasonable system parameters, allowing for submicrosecond readout with high fidelity. For Majorana transmons, the light-matter interaction used for readout manifestly conserves Majorana parity, which leads to a notion of quantum nondemolition (QND) readout that is stronger than for conventional charge qu…
We present a superconducting device that realizes the sequential measurement of a transmon qubit. The device disables common limitations of dispersive readout such as Purcell effect or transients in the cavity mode by turning on and off the coupling to the measurement channel on demand. The qubit measurement begins by loading a readout resonator that is coupled to the qubit. After an optimal interaction time with negligible loss, a microwave pump releases the content of the readout mode by upconversion into a measurement line in a characteristic time as low as 10~ns, which is 400 times shorter…
We develop a time-dependent Schrieffer-Wolff-Lindblad perturbation theory to study effective interactions for driven open quantum systems. The starting point of our analysis is a given Lindblad equation, based on which we obtain an effective (averaged) map that describes the renormalization of both the Hamiltonian and collapse operators due to the drive. As a case study, we apply this method to the dispersive readout of a transmon qubit and derive an effective disperive map that describes measurement-induced dephasing and Stark shift for the transmon. The effective map we derive is completely …
We present a unified picture of dispersive readout of quantum systems in and out of equilibrium. A cornerstone of the approach is the backaction of the measured system to the cavity obtained with non-equilibrium linear-response theory. It provides the dispersive shift of the cavity frequency in terms of a system susceptibility. It turns out that already effortless computations of the susceptibility allow one to generalize former results beyond a rotating-wave approximation. Examples are the readout of detuned qubits and thermally excited multi-level systems. For ac-driven quantum systems, we i…
For some cavity-quantum-electrodynamics systems, such as a single electron spin coupled to a passive cavity, it is challenging to reach the strong-coupling regime. In such a weak-coupling regime, the conventional dispersive readout technique cannot be used to resolve the quantum states of the spin. Here we propose an improved dispersive readout method to measure the quantum states of a weakly coupled qubit by harnessing either one or two auxiliary cavities linearly coupled to the passive cavity containing the qubit. With appropriate parameters in both cases, the system excluding the qubit can …
Dispersive sensing is a powerful technique that enables scalable and high-fidelity readout of solid-state quantum bits. In particular, gate-based dispersive sensing has been proposed as the readout mechanism for future topological qubits, which can be measured by single electrons tunneling through zero-energy modes. The development of such a readout requires resolving the coherent charge tunneling amplitude from a quantum dot in a Majorana-zero-mode host system faithfully on short time scales. Here, we demonstrate rapid single-shot detection of a coherent single-electron tunneling amplitude be…
Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here, we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The s…
The dispersive coupling between a qubit and a cavity mode is widely used for performing non-destructive readout of the qubit state. In this approach, it is typically required that the dispersive strong coupling regime is achieved. Here we show that the use of an auxiliary cavity mode reduces by orders of magnitude the required value of the dispersive coupling, for a given decay rate of the cavity mode. The analysis is performed within the input-output formalism, in terms of the photon scattering matrix elements and of the signal-to-noise ratio. We derive simple analytical expressions for the o…
Spectral properties of a quantum circuit are efficiently read out by monitoring the resonance frequency shift it induces in a microwave resonator coupled to it. When the two systems are strongly detuned, theory attributes the shift to an effective resonator capacitance or inductance that depends on the quantum circuit state. At small detuning, the shift arises from the exchange of virtual photons, as described by the Jaynes-Cummings model. Here we present a theory bridging these two limits and illustrate, with several examples, its necessity for a general description of quantum circuits readou…
Silicon spin qubits have emerged as a promising path to large-scale quantum processors. In this prospect, the development of scalable qubit readout schemes involving a minimal device overhead is a compelling step. Here we report the implementation of gate-coupled rf reflectometry for the dispersive readout of a fully functional spin qubit device. We use a p-type double-gate transistor made using industry-standard silicon technology. The first gate confines a hole quantum dot encoding the spin qubit, the second one a helper dot enabling readout. The qubit state is measured through the phase res…
We study the physics of a magnetic molecule described by a "giant" spin with multiple ($d > 2$) spin states interacting with the quantized cavity field produced by a superconducting resonator. By means of the input-output formalism, we derive an expression for the output modes in the dispersive regime of operation. It includes the effect of magnetic anisotropy, which makes different spin transitions addressable. We find that the measurement of the cavity transmission allows to uniquely determine the spin state of the qudits. We discuss, from an effective Hamiltonian perspective, the conditions…
Lindblad theory of linear response susceptibility and dispersive readout in minimal Kitaev junctions
University of Augsburg（奥格斯堡大学）；Institute of Physics, University of Augsburg（奥格斯堡大学物理研究所）；Consejo Superior de Investigaciones Científicas (CSIC)（西班牙高等科学研究委员会）；Quantum Advanced Research Center (QuARC), Consejo Superior de Investigaciones Científicas (CSIC)（西班牙高等科学研究委员会量子先进研究中心）；Instituto de Ciencia de Materiales de Madrid (ICMM), Consejo Superior de Investigaciones Científicas (CSIC)（西班牙高等科学研究委员会马德里材料科学研究所）；Center for Advanced Analytics and Predictive Sciences, University of Augsburg（奥格斯堡大学高级分析与预测科学中心）
We have designed and characterized a micro-SQUID with dispersive readout for use in low temperature scanning probe microscopy systems. The design features a capacitively shunted RF SQUID with a tunable resonance frequency from 5 to 12 GHz, micrometer spatial resolution and integrated superconducting coils for local application of magnetic fields. The SQUID is operated as a nonlinear oscillator with a flux- and power-dependent resonance frequency. Measurements for device characterization and noise benchmarking were carried out at 4 K. The measured flux noise above 10 kHz at 4 K is $80\;\mathrm{…
Radiofrequency cascade readout of coupled spin qubits
RIKEN（理化学研究所）；Quantum Motion（量子运动公司）；London Centre for Nanotechnology, University College London（伦敦大学学院纳米技术伦敦中心）；Department of Materials Sciences and Metallurgy, University of Cambridge（剑桥大学材料科学与工程冶金系）；IMEC（微电子研究中心）
We report on ambipolar gate-defined quantum dots in silicon on insulator (SOI) nanowires fabricated using a customised complementary metal-oxide-semiconductor (CMOS) process. The ambipolarity was achieved by extending a gate over an intrinsic silicon channel to both highly doped n-type and p-type terminals. We utilise the ability to supply ambipolar carrier reservoirs to the silicon channel to demonstrate an ability to reconfigurably define, with the same electrodes, double quantum dots with either holes or electrons. We use gate-based reflectometry to sense the inter-dot charge transition(IDT…
Three key metrics for readout systems in quantum processors are measurement speed, fidelity and footprint. Fast high-fidelity readout enables mid-circuit measurements, a necessary feature for many dynamic algorithms and quantum error correction, while a small footprint facilitates the design of scalable, highly-connected architectures with the associated increase in computing performance. Here, we present two complementary demonstrations of fast high-fidelity single-shot readout of spins in silicon quantum dots using a compact, dispersive charge sensor: a radio-frequency single-electron box. T…
In superconducting circuit architectures for quantum computing, microwave resonators are often used both to isolate qubits from the electromagnetic environment and to facilitate qubit state readout. We analyze the full counting statistics of photons emitted from such driven readout resonators both in and beyond the dispersive approximation. We calculate the overlap between emitted-photon distributions for the two qubit states and explore strategies for its minimization with the purpose of increasing fidelity of intensity-sensitive readout techniques. In the dispersive approximation and at negl…
We present a sensitive, tunable radio-frequency resonator designed to detect reactive changes in nanoelectronic devices down to dilution refrigerator temperatures. The resonator incorporates GaAs varicap diodes to allow electrical tuning of the resonant frequency and the coupling to the input line. We find a resonant frequency tuning range of 8.4 MHz at 55 mK that increases to 29 MHz at 1.5 K. To assess the impact on performance of different tuning conditions, we connect a quantum dot in a silicon nanowire field-effect transistor to the resonator, and measure changes in the device capacitance …
The technique of dispersive gate sensing (DGS) uses a single electrode to readout a qubit by detecting the change in quantum capacitance due to single electron tunnelling. Here, we extend DGS from the detection of discrete tunnel events to the open regime, where many electrons are transported via partially- or fully-transmitting quantum modes. Comparing DGS with conventional transport shows that the technique can resolve the Van Hove singularities of a one-dimensional ballistic system, and also probe aspects of the potential landscape that are not easily accessed with dc transport. Beyond read…
Gate Dispersive Charge Detection in Ge/SiGe Quantum Dots
The University of British Columbia（不列颠哥伦比亚大学）；Stewart Blusson Quantum Matter Institute, University of British Columbia（不列颠哥伦比亚大学斯图尔特·布拉森量子物质研究所）；Delft University of Technology（代尔夫特理工大学）；QuTech and Kavli Institute of Nanoscience, Delft University of Technology（代尔夫特理工大学QuTech与卡弗里纳米科学研究所）；Department of Physics and Astronomy, University of British Columbia（不列颠哥伦比亚大学物理与天文学系）
We report fast charge state readout of a double quantum dot in a CMOS split-gate silicon nanowire transistor via the large dispersive interaction with microwave photons in a lumped-element resonator formed by hybrid integration with a superconducting inductor. We achieve a coupling rate $g_0/(2π) = 204 \pm 2$ MHz by exploiting the large interdot gate lever arm of an asymmetric split-gate device, $α=0.72$, and by inductively coupling to the resonator to increase its impedance, $Z_\text{r}=560~Ω$. In the dispersive regime, the large coupling strength at the double quantum dot hybridisation point…
