With the advent of 5G and the evolution of Internet protocols, industrial applications are moving from vertical solutions to general purpose IP-based infrastructures that need to meet deterministic Quality of Service (QoS) requirements. The IETF DetNet working group aims at providing an answer to this need with support for (i) deterministic worst-case latency and jitter, and (ii) zero packet loss for time-sensitive traffic. In this paper we focus on the joint routing and scheduling problem in large scale deterministic networks using Cycle Specified Queuing and Forwarding (CSQF), an extension of Cyclic Queuing and Forwarding (CQF) with multiple transmission queues and support of segment routing. In this context, we present two centralized algorithms to maximize traffic acceptance for network planning and online flow admission. We propose an effective solution based on column generation and dynamic programming. Thanks to the reinforcement of the model with valid inequalities, we improve the upper bound and the solution. We demonstrate on realistic instances that we reach an optimality gap smaller than 10% in a few seconds. Finally, we also derive an ultra-fast adaptive greedy algorithm to solve the problem at the cost of a small extra gap.
Backpressure routing and scheduling, with its throughput-optimal operation guarantee, is a promising technique to improve throughput in wireless multi-hop networks. Although backpressure is conceptually viewed as layered, the decisions of routing and scheduling are made jointly, which imposes several challenges in practice. In this work, we present Diff-Max, an approach that separates routing and scheduling and has three strengths: (i) Diff-Max improves throughput significantly, (ii) the separation of routing and scheduling makes practical implementation easier by minimizing cross-layer operat…
In this work, we explore the performance of backpressure routing and scheduling for TCP flows over wireless networks. TCP and backpressure are not compatible due to a mismatch between the congestion control mechanism of TCP and the queue size based routing and scheduling of the backpressure framework. We propose a TCP-aware backpressure routing and scheduling that takes into account the behavior of TCP flows. TCP-aware backpressure (i) provides throughput optimality guarantees in the Lyapunov optimization framework, (ii) gracefully combines TCP and backpressure without making any changes to th…
This paper is about the wireless sensor network in environmental monitoring applications. A Wireless Sensor Network consists of many sensor nodes and a base station. The number and type of sensor nodes and the design protocols for any wireless sensor network is application specific. The sensor data in this application may be light intensity, temperature, pressure, humidity and their variations .Clustering and routing are the two areas which are given more attention in this paper.
Millimeter-wave (mmWave) communication is a promising technology to cope with the expected exponential increase in data traffic in 5G networks. mmWave networks typically require a very dense deployment of mmWave base stations (mmBS). To reduce cost and increase flexibility, wireless backhauling is needed to connect the mmBSs. The characteristics of mmWave communication, and specifically its high directional- ity, imply new requirements for efficient routing and scheduling paradigms. We propose an efficient scheduling method, so-called schedule-oriented optimization, based on matching theory th…
The power consumption of enormous network devices in data centers has emerged as a big concern to data center operators. Despite many traffic-engineering-based solutions, very little attention has been paid on performance-guaranteed energy saving schemes. In this paper, we propose a novel energy-saving model for data center networks by scheduling and routing "deadline-constrained flows" where the transmission of every flow has to be accomplished before a rigorous deadline, being the most critical requirement in production data center networks. Based on speed scaling and power-down energy savin…
The dramatic increase in data and connectivity demand, in addition to heterogeneous device capabilities, poses a challenge for future wireless networks. One of the promising solutions is Device-to-Device (D2D) networking. D2D networking, advocating the idea of connecting two or more devices directly without traversing the core network, is promising to address the increasing data and connectivity demand. In this paper, we consider D2D networks, where devices with heterogeneous capabilities including computing power, energy limitations, and incentives participate in D2D activities heterogeneousl…
Wireless sensor networks sense and monitor real-time events. They supervise a geographic area where a phenomenon is to be monitored. The data in sensor networks have different levels of priority and hence their criticality differs. In order to keep up the real time commitment, the applications need higher transmission rates and reliability in information delivery. In this work we propose a multipath routing algorithm which enables the reliable delivery of data. By controlling the scheduling rate, it is possible to prevent congestion and packet loss in the network. The algorithm provides an eff…
Millimeter-wave (mmWave) communication is a promising technology to cope with the exponential increase in 5G data traffic. Such networks typically require a very dense deployment of base stations. A subset of those, so-called macro base stations, feature high-bandwidth connection to the core network, while relay base stations are connected wirelessly. To reduce cost and increase flexibility, wireless backhauling is needed to connect both macro to relay as well as relay to relay base stations. The characteristics of mmWave communication mandates new paradigms for routing and scheduling. The pap…
In this report, we study the issue of delay optimization and energy efficiency in grid wireless sensor networks (WSNs). We focus on STDMA (Spatial Reuse TDMA)) scheduling, where a predefined cycle is repeated, and where each node has fixed transmission opportunities during specific slots (defined by colors). We assume a STDMA algorithm that takes advantage of the regularity of grid topology to also provide a spatially periodic coloring ("tiling" of the same color pattern). In this setting, the key challenges are: 1) minimizing the average routing delay by ordering the slots in the cycle 2) bei…
The back-pressure algorithm is a well-known throughput-optimal algorithm. However, its delay performance may be quite poor even when the traffic load is not close to network capacity due to the following two reasons. First, each node has to maintain a separate queue for each commodity in the network, and only one queue is served at a time. Second, the back-pressure routing algorithm may route some packets along very long routes. In this paper, we present solutions to address both of the above issues, and hence, improve the delay performance of the back-pressure algorithm. One of the suggested …
In distributed computing frameworks like MapReduce, Spark, and Dyrad, a coflow is a set of flows transferring data between two stages of a job. The job cannot start its next stage unless all flows in the coflow finish. To improve the execution performance of such a job, it is crucial to reduce the completion time of a coflow which can contribute more than 50% of the job completion time. While several schedulers have been proposed, we observe that routing, as a factor greatly impacting the Coflow Completion Time (CCT), has not been well considered. In this paper, we focus on the coflow scheduli…
We consider optimal/efficient power allocation policies in a single/multihop wireless network in the presence of hard end-to-end deadline delay constraints on the transmitted packets. Such constraints can be useful for real time voice and video. Power is consumed in only transmission of the data. We consider the case when the power used in transmission is a convex function of the data transmitted. We develop a computationally efficient online algorithm, which minimizes the average power for the single hop. We model this problem as dynamic program (DP) and obtain the optimal solution. Next, we …
Mobile backhaul system based on a wireless mesh network using point-to-point millimetre wave links is a promising solution for dense 5G small cell deployments. While mmW radio technology can provide the sufficient capacity, the management of transport delays over multiple wireless hops is challenging especially if TDD backhaul radios are used. Earlier, we have proposed the Self-Optimizing WMN concept and presented routing and link scheduling principles that can be used for backhaul nodes with single radio unit. In this paper, we are extending the concept to support backhaul nodes that can have…
We consider the impact of scheduling disciplines on performance of routing in the framework of adversarial queuing. We propose an adversarial model which reflects stalling of packets due to transient failures and explicitly incorporates feedback produced by a network when packets are stalled. This adversarial model provides a methodology to study stability of routing protocols when flow-control and congestion-control mechanisms affect the volume of traffic. We show that any scheduling policy that is universally stable, in the regular model of routing that additionally allows packets to have tw…
In the past years, Interconnection Networks have been used quite often and especially in applications where parallelization is critical. Message packets transmitted through such networks can be interrupted using buffers in order to maximize network usage and minimize the time required for all messages to reach their destination. However, preempting a packet will result in topology reconfiguration and consequently in time cost. The problem of scheduling message packets through such a network is referred to as PBS and is known to be NP-Hard. In this paper we have improved, critically, variations…
Backpressure-based adaptive routing algorithms where each packet is routed along a possibly different path have been extensively studied in the literature. However, such algorithms typically result in poor delay performance and involve high implementation complexity. In this paper, we develop a new adaptive routing algorithm built upon the widely-studied back-pressure algorithm. We decouple the routing and scheduling components of the algorithm by designing a probabilistic routing table which is used to route packets to per-destination queues. The scheduling decisions in the case of wireless n…
We study {\em routing} and {\em scheduling} in packet-switched networks. We assume an adversary that controls the injection time, source, and destination for each packet injected. A set of paths for these packets is {\em admissible} if no link in the network is overloaded. We present the first on-line routing algorithm that finds a set of admissible paths whenever this is feasible. Our algorithm calculates a path for each packet as soon as it is injected at its source using a simple shortest path computation. The length of a link reflects its current congestion. We also show how our algorithm …
We consider the problem of Joint Routing, Scheduling and Power-control (JRSP) problem for multihop wireless networks (MHWN) with multiple antennas. We extend the problem and a (sub-optimal) heuristic solution method for JRSP in MHWN with single antennas. We present an iterative scheme to calculate link capacities(achievable rates) in the interference environment of the network using SINR model. We then present the algorithm for solving the JRSP problem. This completes a feasible system model for MHWN when nodes have multiple antennas. We show that the gain we achieve by using multiple antennas…
Quantum networks are gaining momentum in finding applications in a wide range of domains. However, little research has investigated the potential of a quantum network framework to enable highly reliable communications. The goal of this work is to investigate and design the multiple-entanglement routing framework, namely k-entangled routing. In particular, the $k$-entangled routing will enable k paths connecting all demands (source-destination pairs) in the network. To design the $k$-entangled routing, we propose two algorithms that are called Sequential Multi-path Scheduling Algorithm and Min-…
In this paper we propose a new scheduling algorithm called Real Time Scheduling (RTS) which uses virtual nodes for self stabilization. This algorithm deals with all the contributing components of the end-to-end travelling delay of data packets in sensor network and with virtual nodes algorithm achieves QoS in terms of packet delivery, multiple connections, better power management and stable routes in case of failure. RTS delays packets at intermediate hops (not just prioritizes them) for a duration that is a function of their deadline. Delaying packets allows the network to avoid hot spotting …
In this paper we present matrix game-theoretic models for joint routing, network coding, and scheduling problem. First routing and network coding are modeled by using a new approach based on compressed topology matrix that takes into account the inherent multicast gain of the network. The scheduling is optimized by a new approach called network graph soft coloring. Soft graph coloring is designed by switching between different components of a wireless network graph, which we refer to as graph fractals, with appropriate usage rates. The network components, represented by graph fractals, are a n…
Realizing delay-capacity in intermittently connected mobile networks remains a largely open question, with state-of-the-art routing schemes typically focusing either on delay or on capacity. We show the feasibility of routing with both high goodput and desired delay constraints, with REAPER (for Reliable, Efficient, and Predictive Routing), a fully distributed convergecast routing framework that jointly optimizes both path length and path delay. A key idea for efficient instantiation of REAPER is to exploit predictability of mobility patterns, in terms of a semi-deterministic model which appro…
We consider the stability of robust scheduling policies for multiclass queueing networks. These are open networks with arbitrary routing matrix and several disjoint groups of queues in which at most one queue can be served at a time. The arrival and potential service processes and routing decisions at the queues are independent, stationary and ergodic. A scheduling policy is called robust if it does not depend on the arrival and service rates nor on the routing probabilities. A policy is called throughput-optimal if it makes the system stable whenever the parameters are such that the system ca…
Time-Sensitive Networking (TSN) extends IEEE 802.1 Ethernet for safety-critical and real-time applications in several areas, e.g., automotive, aerospace or industrial automation. However, many of these systems also have stringent security requirements, and security attacks may impair safety. Given a TSN-based distributed architecture, a set of applications with tasks and messages, as well as a set of security and redundancy requirements, we are interested to synthesize a system configuration such that the real-time, safety and security requirements are upheld. We use the Timed Efficient Stream…
We suggest and analyze algorithms for routing in multi-hop wireless ad-hoc networks that exploit mutual information accumulation as the physical layer transmission scheme, and are capable of routing multiple packet streams (commodities) when only the average channel state information is present and that only locally. The proposed algorithms are modifications of the Diversity Backpressure (DIVBAR) algorithm, under which the packet whose commodity has the largest "backpressure metric" is chosen to be transmitted and is forwarded through the link with the largest differential backlog (queue lengt…
As large scale deployment of smart devices in the power grid continues, research efforts need to increasingly focus on efficient communication of generated information. This paper describes a strategy for static routing and scheduling of messages in a multi-hop wireless Smart Grid Neighborhood Area Network (NAN) with multiple source nodes and a common set of destinations or gateways. The problem is formulated as a Mixed Integer Linear Program (MILP) and solved using commercial optimization solver CPLEX. Feasibility of the scheme is demonstrated using different network models, constraints, mess…
The Network Function Virtualization (NFV)-Resource Allocation (RA) problem is NP-Hard. Traditional deployment methods revealed the existence of a starvation problem, which the researchers failed to recognize. Basically, starvation here, means the longer waiting times and eventual rejection of low-priority services due to a 'time out'. The contribution of this work is threefold: a) explain the existence of the starvation problem in the existing methods and their drawbacks, b) introduce 'Adaptive Scheduling' (AdSch) which is an 'intelligent scheduling' scheme using a three-factor approach (prior…
In this article we introduce a new model to study stability in multi-hop wireless networks in the framework of adversarial queueing. In such a model, a routing protocol consists of three components: a transmission policy, a scheduling policy to select the packet to transmit form a set of packets parked at a node, and a hearing control mechanism to coordinate transmissions with scheduling. For such a setting, we propose a definition of universal stability that takes into account not only the scheduling policies (as in the standard wireline adversarial model), but also the transmission policies.…
This paper optimizes the scheduling and routing of the co-flows of MapReduce shuffling phase in state-of-the-art and proposed Passive Optical Networking (PON)-based Data Centre Network (DCN) architectures. A time-slotted Mixed Integer Linear Programming (MILP) model is developed and used for the optimization with the objective of minimizing either the total energy consumption or the completion time. The DCN architectures include four state-of-the-art electronic switching architectures which are spine-leaf, Fat-tree, BCube, and DCell data centres. The proposed PON-based DCN architectures includ…
A sensor is a small electronic device which has the ability to sense, compute and communicate either with other sensors or directly with a base station (sink). In a wireless sensor network (WSN), the sensors monitor a region and transmit the collected data packets through routes to the sinks. In this study, we propose a mixed--integer linear programming (MILP) model to maximize the number of time periods that a WSN carries out the desired tasks with limited energy and budget. Our sink and sensor placement, scheduling, routing with connected coverage ($SPSRC$) model is the first in the literatu…
When deploying resource-intensive signal processing applications in wireless sensor or mesh networks, distributing processing blocks over multiple nodes becomes promising. Such distributed applications need to solve the placement problem (which block to run on which node), the routing problem (which link between blocks to map on which path between nodes), and the scheduling problem (which transmission is active when). We investigate a variant where the application graph may contain feedback loops and we exploit wireless networks? inherent multicast advantage. Thus, we propose Multicast-Aware R…
We propose Kevin, a novel demand-aware reconfigurable rack-to-rack datacenter network realized with a simple and efficient control plane. In particular, Kevin makes effective use of the network capacity by supporting integrated and multi-hop routing as well as work-conserving scheduling. To this end, Kevin relies on local greedy routing with small forwarding tables which require local updates only during topological reconfigurations, making this approach ideal for dynamic networks. Specifically, Kevin is based on a de Bruijn topology (using a small number of optical circuit switches) in which …
Configured Grant-based allocation has been adopted in New Radio 3rd Generation Partnership Project Release 16. This scheme is beneficial in supporting Ultra-Reliable and Low Latency Communication for industrial communication, a key Fifth Generation mobile communication usage scenario. This scheduling mechanism enables a user with a periodic traffic to transmit its data readily and bypasses the signaling entailed to scheduling requests and scheduling grants; and provides low latency access. To facilitate ultra-reliable communication, the scheduling mechanism can allow the user to transmit redun…
This Study proposes a routing strategy of combining a packet scheduling with congestion control policy that applied for LEO satellite network with high speed and multiple traffic. It not only ensures the QoS of different traffic, but also can avoid low priority traffic to be "starve" due to their weak resource competitiveness, thus it guarantees the throughput and performance of the network. In the end, we set up a LEO satellite network simulation platform in OPNET to verify the effectiveness of the proposed algorithm.
This paper experimentally evaluates the effects of applying autonomic management to the scheduling of maintenance operations in a deployed Chord network, for various membership churn and workload patterns. Two versions of an autonomic management policy were compared with a static configuration. The autonomic policies varied with respect to the aggressiveness with which they responded to peer access error rates and to wasted maintenance operations. In most experiments, significant improvements due to autonomic management were observed in the performance of routing operations and the quantity of…
In this paper, we consider the problem of finding the maximum routing throughput between any pair of nodes in an arbitrary multirate wireless mesh network (WMN) using multiple paths. Multipath routing is an efficient technique to maximize routing throughput in WMN, however maximizing multipath routing throughput is a NP-complete problem due to the shared medium for electromagnetic wave transmission in wireless channel, inducing collision-free scheduling as part of the optimization problem. In this work, we first provide problem formulation that incorporates collision-free schedule, and then ba…
Chongqing University of Posts and Telecommunications（重庆邮电大学）；University of Guelph（圭尔夫大学）；Hubei University of Arts and Science（湖北文理学院）；Hosei University（法政大学）；RIKEN（理化学研究所）
Edge enabled Industrial Internet of Things (IIoT) platform is of great significance to accelerate the development of smart industry. However, with the dramatic increase in real-time IIoT applications, it is a great challenge to support fast response time, low latency, and efficient bandwidth utilization. To address this issue, Time Sensitive Network (TSN) is recently researched to realize low latency communication via deterministic scheduling. To the best of our knowledge, the combinability of multiple flows, which can significantly affect the scheduling performance, has never been systematica…
Technische Universität Berlin（柏林工业大学）；University of Pittsburgh（匹兹堡大学）；Arizona State University（亚利桑那州立大学）；Khoury College of Computer Sciences, Northeastern University（东北大学科尔里计算机学院）
We investigate the problem of designing delay-aware joint flow control, routing, and scheduling algorithms in general multi-hop networks for maximizing network utilization. Since the end-to-end delay performance has a complex dependence on the high-order statistics of cross-layer algorithms, earlier optimization-based design methodologies that optimize the long term network utilization are not immediately well-suited for delay-aware design. This motivates us in this work to develop a novel design framework and alternative methods that take advantage of several unexploited design choices in the…
