Mobile backhaul system based on a wireless mesh network using point-to-point millimetre wave links is a promising solution for dense 5G small cell deployments. While mmW radio technology can provide the sufficient capacity, the management of transport delays over multiple wireless hops is challenging especially if TDD backhaul radios are used. Earlier, we have proposed the Self-Optimizing WMN concept and presented routing and link scheduling principles that can be used for backhaul nodes with single radio unit. In this paper, we are extending the concept to support backhaul nodes that can have multiple radio units with own beam steering antennas covering non-overlapping sectors. The proposed system is based on dividing the task in separate phases. In the first phase, an active network topology is created by selecting a suitable subset of all available links. In the next step, the routing information and transmission sets are generated. Finally, the link schedule is optimized by finding an optimal ordering of transmission sets. In this paper, we are proposing a feedback loop from transmission set generation to topology management. We show that this feedback loop removes efficiently "troublesome" links from the active topology making it easier to find optimal link schedules.
Due to the rapid densification of small cells in 5G and beyond cellular networks, deploying wired high-bandwidth connections to every small cell base station is difficult, particularly in older metropolitan areas where infrastructure for fiber deployment is lacking. For this reason, mmWave wireless backhaul is being considered as a cost-effective and flexible alternative that has potential to support the high-rate transmission needed to accommodate backhaul traffic demands. However, maintaining a high network survivability is extremely important since networks based on mmWave communication are…
Recently, the millimeter wave (mmWave) bands have been investigated as a means to support the foreseen extreme data rate demands of next-generation cellular networks (5G). However, in order to overcome the severe isotropic path loss and the harsh propagation experienced at such high frequencies, a dense base station deployment is required, which may be infeasible because of the unavailability of fiber drops to provide wired backhauling. To address this challenge, the 3GPP is investigating the concept of Integrated Access and Backhaul (IAB), i.e., the possibility of providing wireless backhaul …
Integrated Access and Backhaul (IAB) is being investigated as a means to overcome deployment costs of ultra-dense 5G millimeter wave (mmWave) networks by realizing wireless backhaul links to relay the access traffic. For the development of these systems, however, it is fundamental to validate the performance of IAB in realistic scenarios through end-to-end system level simulations. In this paper, we shed light on the most recent standardization activities on IAB, and compare architectures with and without IAB in mmWave deployments. While it is well understood that IAB networks reduce deploymen…
The use of unmanned aerial vehicle (UAV)-based communication in millimeter-wave (mmWave) frequencies to provide on-demand radio access is a promising approach to improve capacity and coverage in beyond-5G (B5G) systems. There are several design aspects to be addressed when optimizing for the deployment of such UAV base stations. As traffic demand of mobile users varies across time and space, dynamic algorithms that correspondingly adjust the UAV locations are essential to maximize performance. In addition to careful tracking of spatio-temporal user/traffic activity, such optimization needs to …
Heterogeneous cellular networks with small cells densely deployed underlying the conventional homogeneous macrocells are emerging as a promising candidate for the fifth generation (5G) mobile network. When a large number of base stations are deployed, the cost-effective, flexible, and green backhaul solution becomes one of the most urgent and critical challenges. With vast amounts of spectrum available, wireless backhaul in the millimeter wave (mmWave) band is able to provide several-Gbps transmission rates. To overcome high propagation loss at higher frequencies, mmWave backhaul utilize beamf…
With the explosive growth of mobile data demand, there has been an increasing interest in deploying small cells of higher frequency bands underlying the conventional homogeneous macrocell network, which is usually referred to as heterogeneous cellular networks, to significantly boost the overall network capacity. With vast amounts of spectrum available in the millimeter wave (mmWave) band, small cells at mmWave frequencies are able to provide multi-gigabit access data rates, while the wireless backhaul in the mmWave band is emerging as a cost-effective solution to provide high backhaul capacit…
With the emergence of millimeter-Wave (mmWave) communication technology, the capacity of mobile backhaul networks can be significantly increased. On the other hand, Mobile Edge Computing (MEC) provides an appropriate infrastructure to offload latency-sensitive tasks. However, the amount of resources in MEC servers is typically limited. Therefore, it is important to intelligently manage the MEC task offloading by optimizing the backhaul bandwidth and edge server resource allocation in order to decrease the overall latency of the offloaded tasks. This paper investigates the task allocation probl…
In the scenario where small cells are densely deployed, the millimeter wave (mmWave) wireless backhaul network has been widely used. However, mmWave is easily blocked by obstacles, and how to forward the data of the blocked flows is still a significant challenge. To ensure backhauling capacity, the quality of service (QoS) requirements of flows should be satisfied. In this paper, we investigate the problem of optimal scheduling to maximize the number of flows satisfying their QoS requirements with relays exploited to overcome blockage. To achieve a practical solution, we propose a relay-assist…
We investigate the problem of multi-hop scheduling in self-backhauled millimeter wave (mmWave) networks. Owing to the high path loss and blockage of mmWave links, multi-hop paths between the macro base station and the intended users via full-duplex small cells need to be carefully selected. This paper addresses the fundamental question: how to select the best paths and how to allocate rates over these paths subject to latency constraints. To answer this question, we propose a new system design, which factors in mmWave-specific channel variations and network dynamics. The problem is cast as a n…
This paper investigates the throughput performance issue of the relay-assisted mmWave backhaul network. The maximum traffic demand of small-cell base stations (BSs) and the maximum throughput at the macro-cell BS have been found in a tree-style backhaul network through linear programming under different network settings, which concern both the number of radio chains available on BSs and the interference relationship between logical links in the backhaul network. A novel interference model for the relay-assisted mmWave backhaul network in the dense urban environment is proposed, which demonstra…
Future 5G mobile networks will require increased backhaul (BH) capacity to connect a massive amount of high capacity small cells (SCs) to the network. Because having an optical connection to each SC might be infeasible, mmWave-based (e.g. 60 GHz) BH links are an interesting alternative due to their large available bandwidth. To cope with the increased path loss, mmWave links require directional antennas that should be able to direct their beams to different neighbors, to dynamically change the BH topology, in case new nodes are powered on/off or the traffic demand has changed. Such BH adaptati…
Recently, a mmWave-based access and backhaul integration HetNetsarchitecture (mABHetNets) has been envisioned to provide the high link capacity in both access and backhaul links. In mABHetNets, the access link and the backhaul link will share the same mm-wave spectral resources to serve cellular users as well as to maintain the backhaul capacity of the SBSs. However, a large spectrum bandwidth are occupied by the backhaul link to maintain the backhaul link capacity. Up to 50\% mmWave spectrum resource will be used in backhaul link to satisfy the high speed data traffic. Such "\emph{spectrum oc…
In this paper, a novel distributed scheduling algorithm is proposed, which aims to efficiently schedule both the uplink and downlink backhaul traffic in the relay-assisted mmWave backhaul network with a tree topology. The handshaking of control messages, calculation of local schedules, and the determination of final valid schedule are all discussed. Simulation results show that the performance of the distributed algorithm can reach very close to the maximum traffic demand of the backhaul network, and it can also adapt to the dynamic traffic with sharp traffic demand change of small-cell BSs qu…
Limited backhaul bandwidth and blockage effects are two main factors limiting the practical deployment of millimeter wave (mmWave) networks. To tackle these issues, we study the feasibility of relaying as well as caching in mmWave networks. A user association and relaying (UAR) criterion dependent on both caching status and maximum biased received power is proposed by considering the spatial correlation caused by the coexistence of base stations (BSs) and relay nodes (RNs). A joint UAR and caching placement problem is then formulated to maximize the backhaul offloading traffic. Using stochasti…
Owing to severe path loss and unreliable transmission over a long distance at higher frequency bands, we investigate the problem of path selection and rate allocation for multi-hop self-backhaul millimeter wave (mmWave) networks. Enabling multi-hop mmWave transmissions raises a potential issue of increased latency, and thus, in this work we aim at addressing the fundamental questions: how to select the best multi-hop paths and how to allocate rates over these paths subject to latency constraints? In this regard, we propose a new system design, which exploits multiple antenna diversity, mmWave …
Reducing CO2 emissions is an important global environmental issue. Over the recent years, wireless and mobile communications have increasingly become popular with consumers. An increasingly popular type of wireless access is the so-called Wireless Mesh Networks (WMNs) that provide wireless connectivity through much cheaper and more flexible backhaul infrastructure compared with wired solutions. Wireless Mesh Network (WMN) is an emerging new technology which is being adopted as the wireless internetworking solution for the near future. Due to increased energy consumption in the information and …
Millimeter wave (mmW) bands between 30 and 300 GHz have attracted considerable attention for next-generation cellular networks due to vast quantities of available spectrum and the possibility of very high-dimensional antenna ar-rays. However, a key issue in these systems is range: mmW signals are extremely vulnerable to shadowing and poor high-frequency propagation. Multi-hop relaying is therefore a natural technology for such systems to improve cell range and cell edge rates without the addition of wired access points. This paper studies the problem of scheduling for a simple infrastructure c…
With the increasing network densification, it has become exceedingly difficult to provide traditional fiber backhaul access to each cell site, which is especially true for small cell base stations (SBSs). The increasing maturity of millimeter wave (mmWave) communication has opened up the possibility of providing high-speed wireless backhaul to such cell sites. Since mmWave is also suitable for access links, the third generation partnership project (3GPP) is envisioning an integrated access and backhaul (IAB) architecture for the fifth generation (5G) cellular networks in which the same infrast…
Deployment of small cells in dense urban areas dedicated to the heterogeneous network (HetNet) and associated relay nodes for improving backhauling is expected to be an important structural element in the design of beyond 5G (B5G) and 6G wireless access networks. A key operational aspect in HetNets is how to optimally implement the wireless backhaul links to efficiently support the traffic demand. In this work, we utilize the recently proposed Robotic Aerial Small Cells (RASCs) that are able to grasp at different tall urban landforms as wireless relay nodes for backhauling. This can be conside…
The recently proposed NR-ready integrated access and backhaul (IAB) architecture promises to bring a cost-efficient deployment solution for both coverage extension and capacity boosting in future 5G/5G+ systems. While its impact on the coverage extension was thoughtfully addressed in the literature, the effect of advanced functionalities such as multi-hop, multi-connectivity, and multi-beam operations on the throughput remains unclear. We review and characterize the system-level impact of these capabilities on the performance of self-backhauled IAB systems operating in half-duplex mode and uti…
Today, a large portion of the mobile data traffic is consumed behind the shielding walls of buildings or in the Faraday cage of trains. This renders cellular network coverage from outdoor cell sites difficult. Indoor small cells and distributed antennas along train tracks are often considered as a solution, but the cost and the need for optical fiber backhaul are often prohibitive. To alleviate this issue, we describe an out-of-band repeater that converts a sub-6 GHz cell signal from a small cell installed at a cell tower to a mmWave frequency for the fronthaul to buildings or distributed ante…
The communication at mmWave frequencies is a promising enabler for ultra high data rates in the next generation of mobile cellular networks (5G). The harsh propagation environment at such high frequencies, however, demands a dense base station deployment, which may be infeasible because of the unavailability of fiber drops to provide wired backhauling. To address this issue, 3GPP has recently proposed a Study Item on Integrated Access and Backhaul (IAB), i.e., on the possibility of providing the wireless backhaul together with the radio access to the mobile terminals. The design of IAB base st…
Recently, a mmWave-based access and backhaul integration heterogeneous networks (HetNets) architecture (mABHetNets) has been envisioned to provide high wireless capacity.Since the access link and the backhaul link share the same mmwave spectral resource, a large spectrum bandwidth is occupied by the backhaul link, which hinders the wireless access capacity improvement. To overcome the backhaul spectrum occupation problem and improve the network throughput in the existing mABHetNets, we introduce the cache at base stations (BSs). In detail, by caching popular files at small base stations (SBSs)…
In milimeter wave heterogenous networks with integrated access and backhaul (mABHetNets), a considerable part of spectrum resources are occupied by the backhaul link, which limits the performance of the access link. In order to overcome such backhaul "spectrum occupancy", we introduce cache in mABHetNets. Caching popular files at small base stations (SBSs) can offload the backhaul traffic and transfer spectrum from the backhaul link to the access link. To achieve the optimal performance of the cache-enabled mABHetNets, we first analyze the signal-to-interference-plus-noise ratio (SINR) distrib…
Wireless mesh networks (WMNs) are evolving as a key technology for next-generation wireless networks showing raid progress and numerous applications. These networks have the potential to provide robust and high-throughput data delivery to wireless users. In a WMN, high speed routers equipped with advanced antennas, communicate with each other in a multi-hop fashion over wireless channels and form a broadband backhaul. However, the throughput of a WMN may be severely degraded due to presence of some selfish routers that avoid forwarding packets for other nodes even as they send their own traffi…
In a wireless mesh network (WMN), high speed routers equipped with advanced antennas, communicate with each other in a multi-hop fashion over wireless channels and form a broadband backhaul. WMNs provide reliable connectivity and fault-tolerance, as each node is connected to several other nodes. If a node fails due to hardware problems, its neighbors can find another route. Extra capacity can be achieved by introducing additional nodes in the network. However, the throughput of a WMN may be severely degraded due to presence of some selfish routers that avoid forwarding packets for other nodes …
Millimeter wave (mmW) cellular systems will require high gain directional antennas and dense base station (BS) deployments to overcome high near field path loss and poor diffraction. As a desirable side effect, high gain antennas provide interference isolation, providing an opportunity to incorporate self-backhauling--BSs backhauling among themselves in a mesh architecture without significant loss in throughput--to enable the requisite large BS densities. The use of directional antennas and resource sharing between access and backhaul links leads to coverage and rate trends that differ signifi…
We design and build SKYHAUL, the first large-scale, autonomous, self-organizing network of Unmanned Aerial Vehicles (UAVs) that are connected using a mmWave wireless mesh backhaul. While the use of a mmWave backhaul paves the way for a new class of bandwidth-intensive, latency-sensitive cooperative applications (e.g., LTE coverage during disasters, surveillance during rescue in challenging terrains), the network of UAVs allows these applications to be executed at operating ranges that are far beyond the line-of-sight distances that limit individual UAVs today. To realize the challenging vision…
With the dense deployment of millimeter wave (mmWave) front ends and popularization of bandwidth-intensive applications, shared backhaul in fiber-wireless (FiWi) networks is still facing a bandwidth crunch. To alleviate the backhaul pressure, in this paper, caching capability is enabled at the edge of FiWi networks, i.e., optical network unit access points (ONU-APs). On the other hand, as both power budget and backhaul bandwidth in FiWi networks are constrained, it is challenging to properly leverage power for caching and that for wireless transmission to achieve superior system performance. A…
With the introduction of new technologies such as Unmanned Aerial Vehicle (UAV), High Altitude Platform Station (HAPS), Millimeter Wave (mmWave) frequencies, Massive Multiple-Input Multiple-Output (mMIMO), and beamforming, wireless backhaul is expected to be an integral part of the 5G networks. While this concept is nothing new, it was shortcoming in terms of performance compared to the fiber backhauling. However, with these new technologies, fiber is no longer the foremost technology for backhauling. With the projected densification of networks, wireless backhaul has become mandatory to use. …
In this paper, a novel framework is proposed for optimizing the operation and performance of a large-scale, multi-hop millimeter wave (mmW) backhaul within a wireless small cell network (SCN) that encompasses multiple mobile network operators (MNOs). The proposed framework enables the small base stations (SBSs) to jointly decide on forming the multi-hop, mmW links over backhaul infrastructure that belongs to multiple, independent MNOs, while properly allocating resources across those links. In this regard, the problem is addressed using a novel framework based on matching theory that is compos…
Millimeter-wave (mmWave) communication is a promising technology to cope with the expected exponential increase in data traffic in 5G networks. mmWave networks typically require a very dense deployment of mmWave base stations (mmBS). To reduce cost and increase flexibility, wireless backhauling is needed to connect the mmBSs. The characteristics of mmWave communication, and specifically its high directional- ity, imply new requirements for efficient routing and scheduling paradigms. We propose an efficient scheduling method, so-called schedule-oriented optimization, based on matching theory th…
The development of self-interference (SI) cancelation technology makes full-duplex (FD) communication possible. Considering the quality of service (QoS) of flows in small cells densely deployed scenario with limited time slot (TS) resources, this paper introduces the FD communication into the concurrent scheduling problem of millimeter-wave (mmWave) wireless backhaul network. We propose a QoS-aware FD concurrent scheduling algorithm to maximize the number of flows with their QoS requirements satisfied. Based on the contention graph, the algorithm makes full use of the FD condition. Both residu…
Future mobile traffic growth will require 5G cellular networks to densify the deployment of small cell base stations (BS). As it is not feasible to form a backhaul (BH) by wiring all BSs to the core network, directional mmWave links can be an attractive solution to form BH links, due to their large available capacity. When small cells are powered on/off or traffic demands change, the BH may require reconfiguration, leading to topology and traffic routing changes. Ideally, such reconfiguration should be seamless and should not impact existing traffic. However, when using highly directional BH a…
Integrated access and backhaul (IAB) is one of the promising techniques for 5G networks and beyond (6G), in which the same node/hardware is used to provide both backhaul and cellular services in a multi-hop fashion. Due to the sensitivity of the backhaul links with high rate/reliability demands, proper network planning is needed to make the IAB network performing appropriately and as good as possible. In this paper, we study the effect of deployment optimization on the coverage of IAB networks. We concentrate on the cases where, due to either geographical or interference management limitations…
Millimeter-wave (mmWave) communication is a promising technology to cope with the exponential increase in 5G data traffic. Such networks typically require a very dense deployment of base stations. A subset of those, so-called macro base stations, feature high-bandwidth connection to the core network, while relay base stations are connected wirelessly. To reduce cost and increase flexibility, wireless backhauling is needed to connect both macro to relay as well as relay to relay base stations. The characteristics of mmWave communication mandates new paradigms for routing and scheduling. The pap…
The next generations of mobile networks will be deployed as ultra-dense networks, to match the demand for increased capacity and the challenges that communications in the higher portion of the spectrum (i.e., the mmWave band) introduce. Ultra-dense networks, however, require pervasive, high-capacity backhaul solutions, and deploying fiber optic to all base stations is generally considered to be too expensive for network operators. The 3rd Generation Partnership Project (3GPP) has thus introduced Integrated Access and Backhaul (IAB), a wireless backhaul solution in which the access and backhaul…
Cellular (C) setups facilitate the connectivity amongst the devices with better provisioning of services to its users. Vehicular networks are one of the representative setups that aim at expanding their functionalities by using the available cellular systems like Long Term Evolution (LTE)-based Evolved Universal Terrestrial Radio Access Network (E-UTRAN) as well as the upcoming Fifth Generation (5G)-based functional architecture. The vehicular networks include Vehicle to Vehicle (V2V), Vehicle to Infrastructure (V2I), Vehicle to Pedestrian (V2P) and Vehicle to Network (V2N), all of which are r…
