Profile likelihood confidence intervals are a robust alternative to Wald's method if the asymptotic properties of the maximum likelihood estimator are not met. However, the constrained optimization problem defining profile likelihood confidence intervals can be difficult to solve in these situations, because the likelihood function may exhibit unfavorable properties. As a result, existing methods may be inefficient and yield misleading results. In this paper, we address this problem by computing profile likelihood confidence intervals via a trust-region approach, where steps computed based on local approximations are constrained to regions where these approximations are sufficiently precise. As our algorithm also accounts for numerical issues arising if the likelihood function is strongly non-linear or parameters are not estimable, the method is applicable in many scenarios where earlier approaches are shown to be unreliable. To demonstrate its potential in applications, we apply our algorithm to benchmark problems and compare it with 6 existing approaches to compute profile likelihood confidence intervals. Our algorithm consistently achieved higher success rates than any competitor while also being among the quickest methods. As our algorithm can be applied to compute both confidence intervals of parameters and model predictions, it is useful in a wide range of scenarios.
Given $n=mk$ $iid$ samples from $N(θ,σ^2)$ with $θ$ and $σ^2$ unknown, we have two ways to construct $t$-based confidence intervals for $θ$. The traditional method is to treat these $n$ samples as $n$ groups and calculate the intervals. The second, and less frequently used, method is to divide them into $m$ groups with each group containing $k$ elements. For this method, we calculate the mean of each group, and these $k$ mean values can be treated as $iid$ samples from $N(θ,σ^2/k)$. We can use these $k$ values to construct $t$-based confidence intervals. Intuition tells us that, at the same co…
A new method is proposed for the correction of confidence intervals when the original interval does not have the correct nominal coverage probabilities in the frequentist sense. The proposed method is general and does not require any distributional assumptions. It can be applied to both frequentist and Bayesian inference where interval estimates are desired. We provide theoretical results for the consistency of the proposed estimator, and give two complex examples, on confidence interval correction for composite likelihood estimators and in approximate Bayesian computation (ABC), to demonstrat…
In many statistical problems, several estimators are usually available for interval estimation of a parameter of interest, and hence, the selection of an appropriate estimator is important. The criterion for a good estimator is to have a high coverage probability close to the nominal level and a shorter interval length. However, these two concepts are in opposition to each other: high and low coverages are associated with longer and shorter interval lengths respectively. Some methods, such as bootstrap calibration, modify the nominal level to improve the coverage and thereby allow the selectio…
In this paper, we develop an approach for optimizing the explicit binomial confidence interval recently derived by Chen et al. The optimization reduces conservativeness while guaranteeing prescribed coverage probability.
By the modified directed likelihood, higher order accurate confidence limits for a scalar parameter are obtained from the likelihood. They are conveniently described in terms of a confidence distribution, that is a sample dependent distribution function on the parameter space. In this paper we explore a different route to accurate confidence limits via tail-symmetric confidence curves, that is curves that describe equal tailed intervals at any level. Instead of modifying the directed likelihood, we consider inversion of the log-likelihood ratio when evaluated at the median of the maximum likel…
Suppose that X_1,X_2,...,X_n are independent and identically Bernoulli(theta) distributed. Also suppose that our aim is to find an exact confidence interval for theta that is the intersection of a 1-α/2 upper confidence interval and a 1-α/2 lower confidence interval. The Clopper-Pearson interval is the standard such confidence interval for theta, which is widely used in practice. We consider the randomized confidence interval of Stevens, 1950 and present some extensions, including pseudorandomized confidence intervals. We also consider the "data-randomized" confidence interval of Korn, 1987 an…
Standard confidence intervals employed in applied statistical analysis are usually based on asymptotic approximations. Such approximations can be considerably inaccurate in small and moderate sized samples. We derive accurate confidence intervals based on higher-order approximate quantiles of the score function. The coverage approximation error is $O(n^{-3/2})$ while the approximation error of confidence intervals based on the asymptotic normality of MLEs is $O(n^{-1/2})$. Monte Carlo simulations confirm the theoretical findings. An implementation for regression models and real data applicatio…
We consider the problem of interval estimation of the odds ratio. An asymptotic confidence interval is widely applied in medical research. Unfortunately that confidence interval has a poor coverage probability: it is significantly smaller than the nominal confidence level. In this paper a new confidence interval is proposed. The construction needs only information on sample sizes and sample odds ratio. The coverage probability of the proposed confidence interval is at least the nominal confidence level.
We consider interval estimation of the difference between two binomial proportions. Several methods of constructing such an interval are known. Unfortunately those confidence intervals have poor coverage probability: it is significantly smaller than the nominal confidence level. In this paper a new confidence interval is proposed. The construction needs only information on sample sizes and sample difference between proportions. The coverage probability of the proposed confidence interval is at least the nominal confidence level. The new confidence interval is illustrated by a medical example.
A novel confidence interval estimator is proposed for the risk difference in noninferiority binomial trials. The confidence interval is consistent with an exact unconditional test that preserves the type-I error, and has improved power, particularly for smaller sample sizes, compared to the confidence interval by Chan & Zhang (1999). The improved performance of the proposed confidence interval is theoretically justified and demonstrated with simulations and examples. An R package is also distributed that implements the proposed methods along with other confidence interval estimators.
We consider the problem of constructing confidence intervals for nonparametric functional data analysis using empirical likelihood. In this doubly infinite-dimensional context, we demonstrate the Wilks's phenomenon and propose a bias-corrected construction that requires neither undersmoothing nor direct bias estimation. We also extend our results to partially linear regression involving functional data. Our numerical results demonstrated the improved performance of empirical likelihood over approximation based on asymptotic normality.
In this paper we propose a novel procedure to construct a confidence interval for multivariate time series predictions using long short term memory network. The construction uses a few novel block bootstrap techniques. We also propose an innovative block length selection procedure for each of these schemes. Two novel benchmarks help us to compare the construction of this confidence intervals by different bootstrap techniques. We illustrate the whole construction through S\&P $500$ and Dow Jones Index datasets.
One-sided confidence intervals are presented for the average of non-identical Bernoulli parameters. These confidence intervals are expressed as analytical functions of the total number of Bernoulli games won, the number of rounds and the confidence level. Tightness of these bounds in the sense of Buehler, i.e. as the strictest possible monotonic intervals, is demonstrated for all confidence levels. A simple interval valid for all confidence levels is also provided with a tightness guarantee. Finally, an application of the proposed confidence intervals to sequential sampling is discussed.
Interval estimation of the probability of success in a Binomial model is considered. Zieliński (2018) showed that the confidence interval which uses information about non-homogeneity of the sample is better than the classical one. In the following paper the shortest confidence interval for non-homogenous sample is constructed.
We propose simple formulas of confidence intervals for the Wald statistic, likelihood ratio statistic, and score statistic for a network meta-analysis. In addition, we consider resolutions for concerns that network meta-analyses with a small number of studies cannot hold a nominal confidence level. For a bias adjustment in analyses with a small number of studies, a Bartlett-type adjustment is a well-known method. Many Bartlett-type adjustment-type methods are based on maximum likelihood estimators. However, the network meta-analysis often uses the restricted maximum likelihood estimators that …
Well-recommended methods of forming `confidence intervals' for a binomial proportion give interval estimates that do not actually meet the definition of a confidence interval, in that their coverages are sometimes lower than the nominal confidence level. The methods are favoured because their intervals have a shorter average length than the Clopper-Pearson (gold-standard) method, whose intervals really are confidence intervals. Comparison of such methods is tricky -- the best method should perhaps be the one that gives the shortest intervals (on average), but when is the coverage of a method s…
We discuss a new way of constructing pointwise confidence intervals for the distribution function in the current status model. The confidence intervals are based on the smoothed maximum likelihood estimator (SMLE) and constructed using bootstrap methods. Other methods to construct confidence intervals, using the non-standard limit distribution of the (restricted) MLE, are compared to our approach via simulations and real data applications.
Jędrzejczak et al. (2018) constructed a confidence interval for a ratio of quantiles coming from the Dagum distribution, which is frequently applied as a theoretical model in numerous income distribution analyses. The proposed interval is symmetric with respect to the ratio of sample quantiles, which result may be unsatisfactory in many practical applications. The search for a confidence interval with a smaller length led to the derivation of the shortest interval with the ends being asymmetric relative to the ratio of sample quantiles. In the paper, the existence of the shortest confidence in…
This short note argues that 95% confidence intervals for MCMC estimates can be obtained even without establishing a CLT, by multiplying their widths by 2.3.
We introduce a general method, named the h-function method, to unify the constructions of level-alpha exact test and 1-alpha exact confidence interval. Using this method, any confidence interval is improved as follows: i) an approximate interval, including a point estimator, is modified to an exact interval; ii) an exact interval is refined to be an interval that is a subset of the previous one. Two real datasets are used to illustrate the method.
In this article, we derive an explicit formula for computing confidence interval for the mean of a bounded random variable. Moreover, we have developed multistage point estimation methods for estimating the mean value with prescribed precision and confidence level based on the proposed confidence interval.
Let $X_1, \ldots, X_n$ be some i.i.d. observations from a heavy tailed distribution $F$, i.e. such that the common distribution of the excesses over a high threshold $u_n$ can be approximated by a Generalized Pareto Distribution $G_{γ,σ_n}$ with $γ>0$. This work is devoted to the problem of finding confidence regions for the couple $(γ,σ_n)$ : combining the empirical likelihood methodology with estimation equations (close but not identical to the likelihood equations) introduced by J. Zhang (Australian and New Zealand J. Stat n.49(1), 2007), asymptotically valid confidence regions for $(γ,σ_n)…
We compare the following two sources of poor coverage of post-model-selection confidence intervals: the preliminary data-based model selection sometimes chooses the wrong model and the data used to choose the model is re-used for the construction of the confidence interval.
Empirical-likelihood-based confidence intervals for a mean were introduced by Owen [Biometrika 75 (1988) 237-249], where at least a finite second moment is required. This excludes some important distributions, for example, those in the domain of attraction of a stable law with index between 1 and 2. In this article we use a method similar to Qin and Wong [Scand. J. Statist. 23 (1996) 209-219] to derive an empirical-likelihood-based confidence interval for the mean when the underlying distribution has heavy tails. Our method can easily be extended to obtain a confidence interval for any order o…
We evaluate the model averaged profile likelihood confidence intervals proposed by Fletcher and Turek (2011) in a simple situation in which there are two linear regression models over which we average. We obtain exact expressions for the coverage and the scaled expected length of the intervals and use these to compute these quantities in particular situations. We show that the Fletcher-Turek confidence intervals can have coverage well below the nominal coverage and expected length greater than that of the standard confidence interval with coverage equal to the same minimum coverage. In these s…
We exploit the asymptotic normality of the extreme value theory (EVT) based estimators of the parameters of a symmetric Lévy-stable distribution, to construct confidence intervals. The accuracy of these intervals is evaluated through a simulation study.
In this short note I apply the methodology of game-theoretic probability to calculating non-asymptotic confidence intervals for the coefficient of a simple first order scalar autoregressive model. The most distinctive feature of the proposed procedure is that with high probability it produces confidence intervals that always cover the true parameter value when applied sequentially.
Out-of-bag error is commonly used as an estimate of generalisation error in ensemble-based learning models such as random forests. We present confidence intervals for this quantity using the delta-method-after-bootstrap and the jackknife-after-bootstrap techniques. These methods do not require growing any additional trees. We show that these new confidence intervals have improved coverage properties over the naive confidence interval, in real and simulated examples.
College of Information and Computer Sciences（信息与计算机科学学院）；University of Massachusetts（马萨诸塞大学）
We present a new method for constructing a confidence interval for the mean of a bounded random variable from samples of the random variable. We conjecture that the confidence interval has guaranteed coverage, i.e., that it contains the mean with high probability for all distributions on a bounded interval, for all samples sizes, and for all confidence levels. This new method provides confidence intervals that are competitive with those produced using Student's t-statistic, but does not rely on normality assumptions. In particular, its only requirement is that the distribution be bounded on a …
We consider the classic problem of interval estimation of a proportion $p$ based on binomial sampling. The "exact" Clopper-Pearson confidence interval for $p$ is known to be unnecessarily conservative. We propose coverage-adjustments of the Clopper-Pearson interval using prior and posterior distributions of $p$. The adjusted intervals have improved coverage and are often shorter than competing intervals found in the literature. Using new heatmap-type plots for comparing confidence intervals, we find that the coverage-adjusted intervals are particularly suitable for $p$ close to 0 or 1.
In this short note, we show how to use concentration inequalities in order to build exact confidence intervals for the Hurst parameter associated with a one-dimensional fractional Brownian motion
This note points out how confidence interval estimates for standard deviation transform into confidence interval estimates for the power of F-tests at fixed alternative means. An application is shown for the test of a two-sided hypothesis for the mean of a normal distribution.
This study aims to evaluate the performance of power in the likelihood ratio test for changepoint detection by bootstrap sampling, and proposes a hypothesis test based on bootstrapped confidence interval lengths. Assuming i.i.d normally distributed errors, and using the bootstrap method, the changepoint sampling distribution is estimated. Furthermore, this study describes a method to estimate a data set with no changepoint to form the null sampling distribution. With the null sampling distribution, and the distribution of the estimated changepoint, critical values and power calculations can be…
The age of big data has produced data sets that are computationally expensive to analyze and store. Algorithmic leveraging proposes that we sample observations from the original data set to generate a representative data set and then perform analysis on the representative data set. In this paper, we present efficient algorithms for constructing finite sample confidence intervals for each algorithmic leveraging estimated regression coefficient, with asymptotic coverage guarantees. In simulations, we confirm empirically that the confidence intervals have the desired coverage probabilities, while…
The current standard for confidence interval construction in the context of a possibly misspecified model is to use an interval based on the sandwich estimate of variance. These intervals provide asymptotically correct coverage, but small-sample coverage is known to be poor. By eliminating a plug-in assumption, we derive a pivot-based method for confidence interval construction under possibly misspecified models. When compared against confidence intervals generated by the sandwich estimate of variance, this method provides more accurate coverage of the pseudo-true parameter at small sample siz…
The asymptotic results pertaining to the distribution of the log likelihood ratio allow for the creation of a confidence region, which is a general extension of the confidence interval. Two and three dimensional regions can be displayed visually in order to describe the plausible region of the parameters of interest simultaneously. While most advanced statistical textbooks on inference discuss these asymptotic confidence regions, there is no exploration of how to numerically compute these regions for graphical purposes. This article demonstrates the application of a simple trigonometric identi…
It is proved that the average length of standard confidence intervals for parameters of gamma and normal distributions monotonically decrease with the sample size. The proofs are based on fine properties of the classical gamma function.
We extend the method of Balister, Bollobás and Walters for determining rigorous confidence intervals for the critical threshold of two dimensional lattices to three (and higher) dimensional lattices. We describe a method for determining a full confidence interval and apply it to show that the critical threshold for bond percolation on the simple cubic lattice is between 0.2485 and 0.2490 with 99.9999% confidence, and the critical threshold for site percolation on the same lattice is between 0.3110 and 0.3118 with 99.9999% confidence.
We introduce a new framework for creating point-wise confidence intervals for the distribution of event times for current status data. Existing methods are based on asymptotics. Our framework is based on binomial properties and motivates confidence intervals that are very simple to apply and are valid, i.e., guarantee nominal coverage. Although these confidence intervals are necessarily conservative for small sample sizes, asymptotically their coverage rate approaches the nominal one. This binomial framework also motivates approximately valid confidence intervals, and simulations show that the…
Consider a linear regression model with independent and identically normally distributed random errors. Suppose that the parameter of interest is a specified linear combination of the regression parameters. We prove that the usual confidence interval for this parameter is admissible within a broad class of confidence intervals.
We study nonparametric isotonic confidence intervals for monotone functions. In Banerjee and Wellner (2001) pointwise confidence intervals, based on likelihood ratio tests for the restricted and unrestricted MLE in the current status model, are introduced. We extend the method to the treatment of other models with monotone functions, and demonstrate our method by a new proof of the results in Banerjee and Wellner (2001) and also by constructing confidence intervals for monotone densities, for which still theory had to be developed. For the latter model we prove that the limit distribution of t…
Contribution to the discussion of the paper "Causal inference using invariant prediction: identification and confidence intervals" by Peters, Bühlmann and Meinshausen, to appear in the Journal of the Royal Statistical Society, Series B.
Institut de Mathématiques de Toulouse（图卢兹数学研究所）；Universidad de Valladolid（巴利亚多利德大学）
We provide the asymptotic distribution of the major indexes used in the statistical literature to quantify disparate treatment in machine learning. We aim at promoting the use of confidence intervals when testing the so-called group disparate impact. We illustrate on some examples the importance of using confidence intervals and not a single value.
We present an efficient method of calculating exact confidence intervals for the hypergeometric parameter representing the number of "successes," or "special items," in the population. The method inverts minimum-width acceptance intervals after shifting them to make their endpoints nondecreasing while preserving their level. The resulting set of confidence intervals achieves minimum possible average size, and even in comparison with confidence sets not required to be intervals it attains the minimum possible cardinality most of the time, and always within $1$. The method compares favorably wit…
Rating systems are ubiquitous, with applications ranging from product recommendation to teaching evaluations. Confidence intervals for functionals of rating data such as empirical means or quantiles are critical to decision-making in various applications including recommendation/ranking algorithms. Confidence intervals derived from standard Hoeffding and Bernstein bounds can be quite loose, especially in small sample regimes, since these bounds do not exploit the geometric structure of the probability simplex. We propose a new approach to deriving confidence intervals that are tailored to the …
Confidence intervals are a popular way to visualize and analyze data distributions. Unlike p-values, they can convey information both about statistical significance as well as effect size. However, very little work exists on applying confidence intervals to multivariate data. In this paper we define confidence intervals for multivariate data that extend the one-dimensional definition in a natural way. In our definition every variable is associated with its own confidence interval as usual, but a data vector can be outside of a few of these, and still be considered to be within the confidence a…
We study exact confidence intervals and two-sided hypothesis tests for univariate parameters of stochastically increasing discrete distributions, such as the binomial and Poisson distributions. It is shown that several popular methods for constructing short intervals lack strict nestedness, meaning that accepting a lower confidence level not always will lead to a shorter confidence interval. These intervals correspond to a class of tests that are shown to assign differing $p$-values to indistinguishable models. Finally, we show that among strictly nested intervals, fiducial intervals, includin…
Confidence interval procedures used in low dimensional settings are often inappropriate for high dimensional applications. When a large number of parameters are estimated, marginal confidence intervals associated with the most significant estimates have very low coverage rates: They are too small and centered at biased estimates. The problem of forming confidence intervals in high dimensional settings has previously been studied through the lens of selection adjustment. In this framework, the goal is to control the proportion of non-covering intervals formed for selected parameters. In this pa…
This paper presents two results concerning uniform confidence intervals for the tail index and the extreme quantile. First, we show that it is impossible to construct a length-optimal confidence interval satisfying the correct uniform coverage over a local non-parametric family of tail distributions. Second, in light of the impossibility result, we construct honest confidence intervals that are uniformly valid by incorporating the worst-case bias in the local non-parametric family. The proposed method is applied to simulated data and a real data set of National Vital Statistics from National C…
When analyzing incomplete data, is it better to use multiple imputation (MI) or full information maximum likelihood (ML)? In large samples ML is clearly better, but in small samples ML's usefulness has been limited because ML commonly uses normal test statistics and confidence intervals that require large samples. We propose small-sample t-based ML confidence intervals that have good coverage and are shorter than t-based confidence intervals under MI. We also show that ML point estimates are less biased and more efficient than MI point estimates in small samples of bivariate normal data. With …
I propose a new type of confidence interval for correct asymptotic inference after using data to select a model of interest without assuming any model is correctly specified. This hybrid confidence interval is constructed by combining techniques from the selective inference and post-selection inference literatures to yield a short confidence interval across a wide range of data realizations. I show that hybrid confidence intervals have correct asymptotic coverage, uniformly over a large class of probability distributions that do not bound scaled model parameters. I illustrate the use of these …
This is the rejoinder to the discussion by Kennedy, Balakrishnan and Wasserman on the paper "On nearly assumption-free tests of nominal confidence interval coverage for causal parameters estimated by machine learning" published in Statistical Science.
Confidence sets play a fundamental role in statistical inference. In this paper, we consider confidence intervals for high dimensional linear regression with random design. We first establish the convergence rates of the minimax expected length for confidence intervals in the oracle setting where the sparsity parameter is given. The focus is then on the problem of adaptation to sparsity for the construction of confidence intervals. Ideally, an adaptive confidence interval should have its length automatically adjusted to the sparsity of the unknown regression vector, while maintaining a prespec…
In economic research inequality measures based on ratios of quantiles are frequently applied to the analysis of income distributions. In the paper, we construct a confidence interval for such measures under the Dagum distribution which has been widely assumed as a~model for income distributions in empirical analyses Its properties are investigated on the basis of computer simulations. The constructed confidence interval is applied to the analysis of inequality income in Poland in 2015.
