Embedded Readout Electronics R&D for the Large PMTs in the JUNO Experiment
M. Bellato, A. Bergnoli, A. Brugnera, S. Chen, Z. Chen, B. Clerbaux, F. dal Corso, D. Corti, J. Dong, G. Galet, A. Garfagnini, A. Giaz, G. Gong, C. Grewing, J. … 展开作者
M. Bellato, A. Bergnoli, A. Brugnera, S. Chen, Z. Chen, B. Clerbaux, F. dal Corso, D. Corti, J. Dong, G. Galet, A. Garfagnini, A. Giaz, G. Gong, C. Grewing, J. Hu, R. Isocrate, X. Jiang, F. Li, I. Lippi, F. Marini, Z. Ning, A. G. Olshevskiyi, D. Pedretti, P. A. Petitjean, M. Robens, V. Shutov, A. Stahl, J. Steinmannh, Y. Sun, S. van Waasen, Y. Wang, Z. Wang, W. Wei, X. Yan, Y. Yang, A. Aiello, A. Andronico, V. Antonelli, W. Bandini, A. Brigatti, A. Barresi, A. Budano, R. Bruno, A. Cabrera, A. Cammi, R. Caruso, D. Chiesa, C. Clementi, S. Costa, X. Ding, S. Dusini, A. Fabbri, M. Fargetta, G. Fiorentini, R. Ford, A. Formozov, M. Giammarchi, M. Grassi, C. Landini, P. Lombardi, C. Lombardo, Y. Malyshkin, F. Mantovani, S. M. Mari, C. Martellini, A. Martini, E. Meroni, M. Mezzetto, L. Miramonti, P. Montini, M. Montuschi, M. Nastasi, F. Ortica, A. Paoloni, S. Parmeggiano, N. Pelliccia, E. Previtali, G. Ranucci, D. Riondino, A. C. Re, B. Ricci, A. Romani, P. Saggese, G. Salamanna, F. H. Sawy, A. Serafini, G. Settanta, C. Sirignano, M. Sisti, L. Stanco, V. Strati, C. Tuvè, G. Verde, L. Votano
Jiangmen Underground neutrino Observatory (JUNO) is a next generation liquid scintillator neutrino experiment under construction phase in South China. Thanks to the anti-neutrinos produced by the nearby nuclear power plants, JUNO will primarily study the neutrino mass hierarchy, one of the open key questions in neutrino physics. One key ingredient for the success of the measurement is to use high speed, high resolution sampling electronics located very close to the detector signal. Linearity in the response of the electronics in another important ingredient for the success of the experiment. During the initial design phase of the electronics, a custom design, with the Front-End and Read-Out electronics located very close to the detector analog signal has been developed and successfully tested. The present paper describes the electronics structure and the first tests performed on the prototypes. The electronics prototypes have been tested and they show good linearity response, with a maximum deviation of 1.3% over the full dynamic range (1-1000 p.e.), fulfilling the JUNO experiment requirements.
In this article we present the large photo-multiplier tube (PMT) afterpulse measurement results of Jiangmen Underground Neutrino Observatory (JUNO) experiment. Totally 11 dynode-PMTs (R12860) from Hamamatsu company and 150 micro-channel plate PMTs (MCP-PMTs, GDB-6201) from NNVT company were tested, an afterpulse model is built according to the afterpulse time distribution and probability of occurrence for these two types of PMTs. The average ratio between the total afterpulse charge with the delay between 0.5 $μ$ s and 20 $μ$ s to the primary pulse charge is 5.6%(13.2%) for the tested MCP-PMTs…
The main goal of the JUNO experiment is the determination of the neutrino mass ordering. To achieve this, an extraordinary energy resolution of at least $3\,\%$ at $1\,$MeV is required for which all parts of the JUNO detector need to meet certain quality criteria. This is relevant in particular for those which are related to the energy resolution of the detector, such as the photomultiplier tubes (PMTs) to be deployed in JUNO. This paper presents the setup and performance of a dedicated PMT mass testing facility to examine and characterize the performance of the 20-inch JUNO PMTs. Its quasi-in…
26,000 3-inch photomultiplier tubes (PMTs) have been produced for Jiangmen Underground Neutrino Observatory (JUNO) by the Hainan Zhanchuang Photonics Technology Co., Ltd (HZC) company in China and passed all acceptance tests with only 15 tubes rejected. The mass production began in 2018 and elapsed for about 2 years at a rate of $\sim$1,000~PMTs per month. The characterization of the PMTs was performed in the factory concurrently with production as a joint effort between HZC and JUNO. Fifteen performance parameters were tracked at different sampling rates, and novel working strategies were imp…
Effect of construction steels on PMTs detection efficiency at JUNO
Suranaree University of Technology（素拉那瑞技术大学）；Institute of High Energy Physics, Chinese Academy of Sciences（中国科学院高能物理研究所）；Institute of Advanced Science Facilities, Shenzhen（深圳先进科学设施研究院）；Chulalongkorn University（朱拉隆功大学）
25,600 3-inch PMTs will be installed in Jiangmen Underground Neutrino Observatory (JUNO) to achieve more precise energy calibration and to extend the physics detection potential. Performances of all bare PMTs have been characterized and these PMTs are being instrumented with the high voltage divider, underwater front-end cable, and connector. In this paper, we present a dedicated study on signal quality at different stages of the instrumentation. An optimized high voltage ratio was confirmed and finalized which improved the PMT transit time spread by 25%. The signal charge was attenuated by 22…
The atmospheric neutrino flux represents a continuous source that can be exploited to infer properties about Cosmic Rays and neutrino oscillation physics. The JUNO observatory, a 20 kt liquid scintillator currently under construction in China, will be able to detect atmospheric neutrinos , given the large fiducial volume and the excellent energy resolution. The light produced in neutrino interactions will be collected by a double-system of photosensors: about 18.000 20" PMTs and about 25.000 3" PMTs. The rock overburden above the experimental hall is around 700 m and the experiment is expected…
The Jiangmen underground neutrino observatory (JUNO) is a neutrino project with a 20-kton liquid scintillator detector located at 700-m underground. The large 20-inch PMTs are one of the crucial components of the JUNO experiment aiming to precision neutrino measurements with better than 3% energy resolution at 1 MeV. The excellent energy resolution and a large fiducial volume provide many exciting opportunities for addressing important topics in neutrino and astro-particle physics. With the container #D at JUNO Pan-Asia PMT testing and potting station, the features of waterproof potted 20-inch…
JUNO is a 20-kton liquid scintillator detector aiming to determine the neutrino mass ordering, precisely measure the oscillation parameters, detect the astrophysical neutrinos and search for exotic physics. It is designed to reach an energy resolution of 3% at 1 MeV with the highest ever PMT coverage, using two types of 20 inch phototubes: MCP-PMT from NNVT and dynode-PMT from Hamamatsu. In this article, the gain and charge response of the MCP and dynode PMTs are investigated with the study of JUNO Central Detector prototype. The linearity of the MCP-PMT charge output is measured too to check …
The high flux of charged particles interacting with the CMS Forward Hadron Calorimeter PMT windows introduced a significant background for the trigger and offline data analysis. During Long Shutdown 1, all of the original PMTs were replaced with multi-anode, thin window photomultiplier tubes. At the same time, the back-end electronic readout system was upgraded to μTCA readout. The experience with commissioning and calibration of the Forward Hadron Calorimeter is described as well as the μTCA system. The upgrade was successful and provided quality data for Run 2 data-analysis at 13 TeV.
Photomultiplier tubes (PMTs) are widely used underwater in large-scale neutrino experiments. As a hollow glass spherelike structure, implosion is unavoidable during long-term operation under large water pressure. There is a possibility of cascade implosion to neighbor PMTs due to shockwave. Jiangmen Underground Neutrino Observatory designed a protection structure for each 20-inch PMT, consisting of a top cover, a bottom cover, and their connection. This paper introduces the requirement and design of the PMT protection system, including the material selection, investigation of manufacture techn…
The 20kt Liquid Scintillator (LS) JUNO detector is being constructed by the International Collaboration in China, with the primary goal of addressing the question of neutrino mass ordering (hierarchy). The main challenge for JUNO is to achieve a record energy resolution, ~3% at 1MeV of energy released in the LS, which is required to perform the neutrino mass hierarchy determination. About 20 000 large 20-inch PMTs with high Photon Detection Efficiency (PDE) and good photocathode uniformity will ensure an approximately 80% surface coverage of the JUNO detector. The JUNO collaboration is prepari…
The main goal of the JUNO experiment is to determine the neutrino mass ordering with a 20\,kt liquid-scintillator detector. The 20-inch PMT is crucial as one of JUNO key instruments to realize an excellent energy resolution of at least 3\,\% at 1\,MeV. The knowledge on PMT's characterisation and feature is critical for detector performance understanding. Large pulses from PMT dark count such as from flasher or others are one of the serious concerns for detector noise control. Focusing on the large pulses from 20-inch PMT dark count, this paper is trying to investigate the causes by measurement…
The Large High Altitude Air Shower Observatory (LHAASO) project has been proposed for the survey and study of cosmic rays. In the LHAASO project, the Water Cherenkov Detector Array (WCDA) is one of major detectors for searching gamma ray sources. A Charge-to-Time Convertor (QTC) ASIC (Application Specification Integrated Circuit) fabricated in Global Foundry 0.35 μm CMOS technology, has been developed for readout of Photomultiplier Tubes (PMTs) in the WCDA. This paper focuses on the evaluation of this front-end readout ASIC performance. Test results indicate that the time resolution is better …
The main goal of the Jiangmen Underground Neutrino Observatory (JUNO) under construction in China is to determine the neutrino mass hierarchy and to measure oscillation parameters to the sub-percent level. The detector consists of 20 ktons of liquid scintillator instrumented by 17612 20-inch photo-multiplier tubes, and 25600 3-inch small PMTs, with photo-cathode coverage of 77%. The electronics system is separated into two main parts. The front-end system, sitting under water, performs analog signal processing. The back-end electronics system, sitting outside water, consists of the DAQ and the…
The Jiangmen Underground Neutrino Observatory (JUNO) is a multipurpose neutrino-oscillation experiment, with a 20 kiloton liquid scintillator detector of unprecedented 3\% energy resolution (at 1 MeV) at 700-meter deep underground. There are ~18,000 20-inch photomultiplier tubes (PMTs) in the central detector with an optical coverage greater than 75%. Control of the systematics of the energy response is crucial to archive the designed energy resolution as well as to reach 1% precision of the absolute energy scale. The detected number of photoelectrons in each PMT differs by two orders of magni…
The determination of the neutrino mass hierarchy, whether the $ν_3$ neutrino mass eigenstate is heavier or lighter than the $ν_1$ and $ν_2$ mass eigenstates, is one of the remaining undetermined fundamental aspects of the Standard Model in the lepton sector. Furthermore the mass hierarchy determination will have an impact in the quest of the neutrino nature (Dirac or Majorana mass terms) towards the formulation of a theory of flavour. The Jiangmen Underground Neutrino Observatory (JUNO) is a reactor neutrino experiment under construction at Kaiping, Jiangmen in Southern China composed by a lar…
The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose neutrino experiment designed to measure the neutrino mass hierarchy using a central detector (CD), which contains 20 kton liquid scintillator (LS) surrounded by about 18,000 photomultiplier tubes (PMTs), located 700~m underground. The rate of cosmic muons reaching the JUNO detector is about 3~Hz and the muon induced neutrons and isotopes are major backgrounds for the neutrino detection. Reconstruction of the muon trajectory in the detector is crucial for the study and rejection of those backgrounds. This paper will introdu…
The Jiangmen Underground Neutrino Observatory(JUNO) experiment will develop an internationally leading neutrino experimental station to measure the order of neutrino mass and carry out many other scientific frontier studies. The entire experimental system includes the detector system, the electronics system, and the data acquisition (DAQ) system. Data flow is the core of JUNO DAQ system. Readout system and Event Building (EB) system are two key aspects of data flow. Based on the requirements analysis of JUNO DAQ, this paper proposes a data flow schema of distributed network readout and second-…
The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose neutrino experiment designed to measure the neutrino mass hierarchy using a central detector (CD), which contains 20 kton liquid scintillator (LS) surrounded by about 17,000 photomultiplier tubes (PMTs). Due to the large fiducial volume and huge number of PMTs, the simulation of a muon particle passing through the CD with the Geant4 toolkit becomes an extremely computation-intensive task. This paper presents a fast simulation implementation using a so-called voxel method: for scintillation photons generated in a certain LS…
The Jiangmen Underground Neutrino Observatory (JUNO) is designed to study neutrino mass hierarchy and measure three of the neutrino oscillation parameters with high precision using reactor antineutrinos. It is also able to study many other physical phenomena, including supernova neutrinos, solar neutrinos, geo-neutrinos, atmosphere neutrinos, and so forth. The central detector of JUNO contains 20,000~tons of liquid scintillator (LS) and about 18,000 20-inch photomultiplier tubes (PMTs), which is the largest liquid scintillator one under construction in the world up today. The energy resolution…
This work presents the design and performance study of compact strips of plastic scintillator with WLS-fiber readout in a dimension of 0.1 * 0.02 * 2 m3, which evaluates as a candidate for cosmic-ray muon detector for JUNO-TAO. The strips coupling with 3-inch PMTs are measured and compared between the single-end and double-end readout options first, and the strip of double-end option coupling with SiPM is further measured and compared with the results of that with the PMTs. The performance of the strips determined by a detailed survey along their length with cosmic-ray muon after a detailed ch…
High precision vertex and energy reconstruction is crucial for large liquid scintillator detectors such as JUNO, especially for the determination of the neutrino mass ordering by analyzing the energy spectrum of reactor neutrinos. This paper presents a data-driven method to obtain more realistic and more accurate expected PMT response of positron events in JUNO, and develops a simultaneous vertex and energy reconstruction method that combines the charge and time information of PMTs. For the JUNO detector, the impact of vertex inaccuracy on the energy resolution is about 0.6\%.
The Jiangmen Underground Neutrino Observatory (JUNO) is designed to determine the neutrino mass ordering and precisely measure oscillation parameters. It is being built in South China at a depth of 700~m underground and comprises a central detector, water Cerenkov detector and top tracker. The central detector is designed to detect anti-neutrinos with an energy resolution of 3\% at 1~MeV, using a 20 kt liquid scintillator target with 17,612 20-inch PMTs and 25,600 3-inch PMTs. The scintillator provides a light yield of approximately 10,000 photons per MeV. Monte Carlo simulation is a crucial t…
The PandaX project consists of a series of xenon-based experiments that are used to search for dark matter (DM) particles and to study the fundamental properties of neutrinos. The next DM experiment PandaX-4T will be using 4 ton liquid xenon in the sensitive volume, which is nearly a factor of seven larger than that of the previous experiment PandaX-II. Due to the increasing target mass, the sensitivity of searching for both DM and neutrinoless double-beta decay ($0νββ$) signals in the same detector will be significantly improved. However, the typical energy of interest for $0νββ$ signals is a…
The Jiangmen Underground Neutrino Observatory (JUNO) is an experimental project designed to determine the neutrino mass ordering and probe the fundamental properties of the neutrino oscillations. The JUNO central detector is a spherical liquid scintillator detector with a diameter of 35.4 m and equipped with approximately 18,000 20-inch PMTs. A trigger threshold of 0.5 MeV can be easily achieved by using a common multiplicity trigger and can meet the requirements for measuring neutrino mass ordering. However, it is essential to further reduce the trigger threshold for detecting solar neutrinos…
The Jiangmen Underground Neutrino Observatory (JUNO) is a 20 kton liquid scintillator detector currently being built in a dedicated underground laboratory in China. It is a multi-purpose underground experiment with a physics program including neutrino mass hierarchy determination, precision measurement of neutrino oscillation parameters, measurement of solar, atmospheric, geo-neutrinos and other important neutrino physics searches. Electron anti-neutrinos are detected via the inverse beta decay by measuring the correlated positron and neutron signals. In this detection channel cosmic ray muon …
Photon detection efficiency is a key parameter of PMTs in high-precision neutrino and dark matter experiments, while most of these experiments are focus on quantum efficiency. More and more experiments are trying to know the detection efficiency for the simulation of the detector such as JUNO. In order to have a good understanding on photon detection efficiency of the large-area PMT , we conducted a detailed comparison of the relative collection efficiencies of a series of dynode PMT with different sizes and collector structures. This study is based on the tests of relative quantum efficiency …
The Jiangmen Underground Neutrino Observatory (JUNO) is a medium-baseline neutrino experiment under construction in China, with the goal to determine the neutrino mass hierarchy. The JUNO electronics readout system consists of an underwater front-end electronics system and an outside-water back-end electronics system. These two parts are connected by 100-meter Ethernet cables and power cables. The back-end card (BEC) is the part of the JUNO electronics readout system used to link the underwater boxes to the trigger system is connected to transmit the system clock and triggered signals. Each BE…
The Jiangmen Underground Neutrino Observatory (JUNO) is a neutrino experiment to determine neutrino mass hierarchy. It has a central detector used for neutrino detection, which consists of a spherical acrylic vessel containing 20 kt LS and about 18,000 20-inch PMTs to collect light from LS. Around the CD, there is a water pool to shield radioactivities. The WP is equipped with about 2000 PMTs to measure cosmic ray muons by detecting Cherenkov light. As one of the important parts in JUNO offline software, the serial simulation framework is developed based on SNiPER. It is in charge of physics g…
The Jiangmen Underground Neutrino Observatory (JUNO) is a large liquid scintillator (LS) detector for neutrino mass ordering and other neutrino physics research. The detector uses large-size $20$ inches photomultiplier tubes to detect photons from a liquid scintillator. The large PMTs are sensitive and easily affected such that the detection efficiency loses about 60$\%$ under the geomagnetic field intensity ($\sim$500 mG). It has a significantly negative effect on the detector performance, and a compensation system is necessary for geomagnetic field shielding. As permalloys are easily rusted …
An ASIC named CATIROC (Charge And Time Integrated Read Out Chip) has been developed for the next-generation neutrino experiments using a large number of photomultiplier tubes (PMTs). Each CATIROC provides the time and the charge measurements for 16 configurable input channels operating in trigger-less mode. Originally designed for the light emission in water Cherenkov detectors, we show in this paper that its use can be extended to liquid-scintillator based experiments. The $\sim$26000 3-inch PMTs of the JUNO experiment, under construction in China, is a case in point. This paper describes the…
We have studied the performance of two different types of front-end systems for our gamma camera based on Hamamatsu H8500 (flat-panel 64 channels multi-anode PSPMT) with a CsI(Tl) scintillator array. The array consists of 64 pixels of $6\times6\times20{\rm mm}^3$ which corresponds to the anode pixels of H8500. One of the system is based on commercial ASIC chips in order to readout every anode. The others are based on resistive charge divider network between anodes to reduce readout channels. In both systems, each pixel (6mm) was clearly resolved by flood field irradiation of $^{137}$Cs. We als…
Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents …
HSE University（高等经济大学）；Joint Institute for Nuclear Research（联合核研究所）
Large-scale detectors consisting of a liquid scintillator target surrounded by an array of photo-multiplier tubes (PMTs) are widely used in the modern neutrino experiments: Borexino, KamLAND, Daya Bay, Double Chooz, RENO, and the upcoming JUNO with its satellite detector TAO. Such apparatuses are able to measure neutrino energy which can be derived from the amount of light and its spatial and temporal distribution over PMT channels. However, achieving a fine energy resolution in large-scale detectors is challenging. In this work, we present machine learning methods for energy reconstruction in…
PandaX-4T is a dark matter direct detection experiment located in China jinping underground laboratory. The central apparatus is a dual-phase xenon detector containing 4 ton liquid xenon in the sensitive volume, with about 500 photomultipliers instrumented in the top and the bottom of the detector. In this paper we present a completely new system of readout electronics and data acquisition in the PandaX-4T experiment. Compared to the one used in the previous PandaX dark matter experiments, the new system features triggerless readout and higher bandwidth. With triggerless readout, dark matter s…
The KM2A(one kilometer square extensive air shower array) is the largest detector array in the LHAA- SO(Large High Altitude Air Shower Observatory) project. The KM2A consists of 5635 EDs(Electromagnetic particle Detectors) and 1221 MDs(Muon Detectors). The EDs are distributed and exposed in the wild. Two channels, Anode and Dynode, are employed for the PMT(photomultiplier tube) signal readout. The readout electronics proposed in this paper aims at the accurate charge and arrival time measurement of the PMT signals, which cover a large amplitude range from 20P.E(photoelectrons) to 2x10^5 P.E. B…
Real-Time Wiener Deconvolution for feature reconstruction in JUNO
Institute of High Energy Physics, Chinese Academy of science（中国科学院高能物理研究所）；University of Chinese Academy of science（中国科学院大学）；Laboratori Nazionali dell'INFN di Frascati, Frascati, Italy（意大利国家核物理研究所弗拉斯卡蒂国家实验室）；Tsinghua University（清华大学）
The Water Cherenkov Detector Array (WCDA) is one of the key parts in the Large High Altitude Air Shower Observatory (LHAASO). In the WCDA, 3600 Photomultiplier Tubes (PMTs) and the Front End Electronics (FEEs) are scattered within a 90000 m2 area, while a time measurement resolution better than 0.5 ns is required in the readout electronics. To achieve such time measurement precision, high quality clock distribution and synchronization among the 400 FEEs (each FEE for 9 PMTs readout) is required. To simplify the electronics system architecture, data, commands, and clock are transmitted simultan…
The Jiangmen Neutrino Underground Observatory (JUNO) is a 20$\,$kton liquid scintillator detector currently under construction near Kaiping in China. The physics program focuses on the determination of the neutrino mass hierarchy with reactor anti-neutrinos. For this purpose, JUNO is located 650$\,$m underground with a distance of 53$\,$km to two nuclear power plants. As a result, it is exposed to a muon flux that requires a precise muon reconstruction to make a veto of cosmogenic backgrounds viable. Established muon tracking algorithms use time residuals to a track hypothesis. We developed an…
The Tile Calorimeter (TileCal) is one detector of the ATLAS experiment at the Large Hadron Collider (LHC). TileCal is a sampling calorimeter made of steel plates and plastic scintillators which are readout using approximately 10,000 PhotoMultipliers Tubes (PMTs). In 2024, the LHC will undergo a series of upgrades towards a High Luminosity LHC (HL-LHC) to deliver up to 7.5 times the current nominal instantaneous luminosity. The ATLAS Tile Phase II Upgrade will accommodate detector and Data AcQuisition (DAQ) system to the HL-LHC requirements. The detector electronics will be redesigned using a n…
In this paper we describe the design, construction, and operation of a first large area double-phase liquid argon Large Electron Multiplier Time Projection Chamber (LAr LEM-TPC). The detector has a maximum drift length of 60 cm and the readout consists of a $40\times 76$ cm$^2$ LEM and 2D projective anode to multiply and collect drifting charges. Scintillation light is detected by means of cryogenic PMTs positioned below the cathode. To record both charge and light signals, we have developed a compact acquisition system, which is scalable up to ton-scale detectors with thousands of charge read…
