In this paper, we introduce a moving object detection algorithm for fisheye cameras used in autonomous driving. We reformulate the three commonly used constraints in rectilinear images (epipolar, positive depth and positive height constraints) to spherical coordinates which is invariant to specific camera configuration once the calibration is known. One of the main challenging use case in autonomous driving is to detect parallel moving objects which suffer from motion-parallax ambiguity. To alleviate this, we formulate an additional fourth constraint, called the anti-parallel constraint, which aids the detection of objects with motion that mirrors the ego-vehicle possible. We analyze the proposed algorithm in different scenarios and demonstrate that it works effectively operating directly on fisheye images.
Valeo DAR Kronach（法雷奥DAR克罗纳赫）；Technische Universität Ilmenau（伊尔默瑙工业大学）；Technische Universität Braunschweig（布伦瑞克工业大学）；Valeo Vision Systems（法雷奥视觉系统）
State-of-the-art self-supervised learning approaches for monocular depth estimation usually suffer from scale ambiguity. They do not generalize well when applied on distance estimation for complex projection models such as in fisheye and omnidirectional cameras. This paper introduces a novel multi-task learning strategy to improve self-supervised monocular distance estimation on fisheye and pinhole camera images. Our contribution to this work is threefold: Firstly, we introduce a novel distance estimation network architecture using a self-attention based encoder coupled with robust semantic fe…
Valeo DAR Kronach（法雷奥达尔斯克罗纳赫）；ENSTA ParisTech Palaiseau（巴黎高等理工学院帕莱索校区）；Valeo Vision Systems（法雷奥视觉系统公司）；Technische Universität Ilmenau（伊尔梅瑙工业大学）
Fisheye cameras are commonly used in applications like autonomous driving and surveillance to provide a large field of view ($>180^{\circ}$). However, they come at the cost of strong non-linear distortions which require more complex algorithms. In this paper, we explore Euclidean distance estimation on fisheye cameras for automotive scenes. Obtaining accurate and dense depth supervision is difficult in practice, but self-supervised learning approaches show promising results and could potentially overcome the problem. We present a novel self-supervised scale-aware framework for learning Euclide…
Zongmu Technology（纵目科技）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）
The 3D visual perception for vehicles with the surround-view fisheye camera system is a critical and challenging task for low-cost urban autonomous driving. While existing monocular 3D object detection methods perform not well enough on the fisheye images for mass production, partly due to the lack of 3D datasets of such images. In this paper, we manage to overcome and avoid the difficulty of acquiring the large scale of accurate 3D labeled truth data, by breaking down the 3D object detection task into some sub-tasks, such as vehicle's contact point detection, type classification, re-identific…
University of Michigan（密歇根大学）；DROP lab（DROP实验室）；Department of Naval Architecture and Marine Engineering（船舶与海洋工程系）
There has been much recent interest in deep learning methods for monocular image based object pose estimation. While object pose estimation is an important problem for autonomous robot interaction with the physical world, and the application space for monocular-based methods is expansive, there has been little work on applying these methods with fisheye imaging systems. Also, little exists in the way of annotated fisheye image datasets on which these methods can be developed and tested. The research landscape is even more sparse for object detection methods applied in the underwater domain, fi…
OPPO US Research Center（OPPO美国研究中心）；InnoPeak Technology, Inc.（InnoPeak技术公司）；Wing LLC（Wing有限责任公司）
In this paper, we deal with the problem of monocular depth estimation for fisheye cameras in a self-supervised manner. A known issue of self-supervised depth estimation is that it suffers in low-light/over-exposure conditions and in large homogeneous regions. To tackle this issue, we propose a novel ordinal distillation loss that distills the ordinal information from a large teacher model. Such a teacher model, since having been trained on a large amount of diverse data, can capture the depth ordering information well, but lacks in preserving accurate scene geometry. Combined with self-supervi…
General Motors Advanced Technical Center Israel（通用汽车以色列高级技术中心）
Existing monocular 3D object detection methods have been demonstrated on rectilinear perspective images and fail in images with alternative projections such as those acquired by fisheye cameras. Previous works on object detection in fisheye images have focused on 2D object detection, partly due to the lack of 3D datasets of such images. In this work, we show how to use existing monocular 3D object detection models, trained only on rectilinear images, to detect 3D objects in images from fisheye cameras, without using any fisheye training data. We outperform the only existing method for monocula…
Humboldt University Berlin（柏林洪堡大学）；Fraunhofer IAIS（弗劳恩霍夫智能分析与信息系统研究所）；Berliner Wasserbetriebe（柏林水务公司）
The task of detecting and classifying damages in sewer pipes offers an important application area for computer vision algorithms. This paper describes a system, which is capable of accomplishing this task solely based on low quality and severely compressed fisheye images from a pipe inspection robot. Relying on robust image features, we estimate camera poses, model the image lighting, and exploit this information to generate high quality cylindrical unwraps of the pipes' surfaces.Based on the generated images, we apply semantic labeling based on deep convolutional neural networks to detect and…
Valeo und Schalter und Sensoren GmbH（法雷奥开关与传感器有限公司）；Valeo Vision Systems（法雷奥视觉系统公司）；Technische University, Chemnitz（开姆尼茨工业大学）
Near field depth estimation around a self driving car is an important function that can be achieved by four wide angle fisheye cameras having a field of view of over 180. Depth estimation based on convolutional neural networks (CNNs) produce state of the art results, but progress is hindered because depth annotation cannot be obtained manually. Synthetic datasets are commonly used but they have limitations. For instance, they do not capture the extensive variability in the appearance of objects like vehicles present in real datasets. There is also a domain shift while performing inference on n…
OccTrack360: 4D Panoptic Occupancy Tracking from Surround-View Fisheye Cameras
School of Artificial Intelligence and Robotics, Hunan University（人工智能与机器人学院，湖南大学）；State Key Laboratory of Extreme Photonics and Instrumentation, Zhejiang University（极端光子学与仪器国家重点实验室，浙江大学）；National Engineering Research Center of Robot Visual Perception and Control Technology, Hunan University（机器人视觉感知与控制技术国家工程研究中心，湖南大学）
Line segment detection is essential for high-level tasks in computer vision and robotics. Currently, most stateof-the-art (SOTA) methods are dedicated to detecting straight line segments in undistorted pinhole images, thus distortions on fisheye or spherical images may largely degenerate their performance. Targeting at the unified line segment detection (ULSD) for both distorted and undistorted images, we propose to represent line segments with the Bezier curve model. Then the line segment detection is tackled by the Bezier curve regression with an end-to-end network, which is model-free and w…
In this report, we proposed a 3D reconstruction method for the full-view fisheye camera. The camera we used is Ricoh Theta, which captures spherical images and has a wide field of view (FOV). The conventional stereo apporach based on perspective camera model cannot be directly applied and instead we used a spherical camera model to depict the relation between 3D point and its corresponding observation in the image. We implemented a system that can reconstruct the 3D scene using captures from two or more cameras. A GUI is also created to allow users to control the view perspective and obtain a …
Valeo Vision Systems（法雷奥视觉系统公司）；University of Limerick（利默里克大学）
We introduce a visual motion segmentation method employing spherical geometry for fisheye cameras and automoated driving. Three commonly used geometric constraints in pin-hole imagery (the positive height, positive depth and epipolar constraints) are reformulated to spherical coordinates, making them invariant to specific camera configurations as long as the camera calibration is known. A fourth constraint, known as the anti-parallel constraint, is added to resolve motion-parallax ambiguity, to support the detection of moving objects undergoing parallel or near-parallel motion with respect to …
The University of Tokyo（东京大学）；Technical University of Munich（慕尼黑工业大学）；Artisense GmbH（Artisense有限公司）
We propose a novel real-time direct monocular visual odometry for omnidirectional cameras. Our method extends direct sparse odometry (DSO) by using the unified omnidirectional model as a projection function, which can be applied to fisheye cameras with a field-of-view (FoV) well above 180 degrees. This formulation allows for using the full area of the input image even with strong distortion, while most existing visual odometry methods can only use a rectified and cropped part of it. Model parameters within an active keyframe window are jointly optimized, including the intrinsic/extrinsic camer…
University of Texas – Arlington（德克萨斯大学阿灵顿分校）；Samsung Research America（三星美国研究院）
Dual-fisheye lens cameras have been increasingly used for 360-degree immersive imaging. However, the limited overlapping field of views and misalignment between the two lenses give rise to visible discontinuities in the stitching boundaries. This paper introduces a novel method for dual-fisheye camera stitching that adaptively minimizes the discontinuities in the overlapping regions to generate full spherical 360-degree images. Results show that this approach can produce good quality stitched images for Samsung Gear 360 -- a dual-fisheye camera, even with hard-to-stitch objects in the stitchin…
Egocentric 3D human pose estimation using a single fisheye camera has become popular recently as it allows capturing a wide range of daily activities in unconstrained environments, which is difficult for traditional outside-in motion capture with external cameras. However, existing methods have several limitations. A prominent problem is that the estimated poses lie in the local coordinate system of the fisheye camera, rather than in the world coordinate system, which is restrictive for many applications. Furthermore, these methods suffer from limited accuracy and temporal instability due to a…
Valeo DAR Kronach（法雷奥DAR克罗纳赫）；TU Ilmenau（伊尔梅瑙工业大学）；TU Braunschweig（布伦瑞克工业大学）；Valeo Vision Systems（法雷奥视觉系统）
A 360° perception of scene geometry is essential for automated driving, notably for parking and urban driving scenarios. Typically, it is achieved using surround-view fisheye cameras, focusing on the near-field area around the vehicle. The majority of current depth estimation approaches focus on employing just a single camera, which cannot be straightforwardly generalized to multiple cameras. The depth estimation model must be tested on a variety of cameras equipped to millions of cars with varying camera geometries. Even within a single car, intrinsics vary due to manufacturing tolerances. De…
Carnegie Mellon University（卡内基梅隆大学）；The Hebrew University of Jerusalem（耶路撒冷希伯来大学）；General Motors（通用汽车公司）
We propose a robust method for estimating road curb 3D parameters (size, location, orientation) using a calibrated monocular camera equipped with a fisheye lens. Automatic curb detection and localization is particularly important in the context of Advanced Driver Assistance System (ADAS), i.e. to prevent possible collision and damage of the vehicle's bumper during perpendicular and diagonal parking maneuvers. Combining 3D geometric reasoning with advanced vision-based detection methods, our approach is able to estimate the vehicle to curb distance in real time with mean accuracy of more than 9…
Self-supervised monocular depth estimation has been widely investigated to estimate depth images and relative poses from RGB images. This framework is attractive for researchers because the depth and pose networks can be trained from just time sequence images without the need for the ground truth depth and poses. In this work, we estimate the depth around a robot (360 degree view) using time sequence spherical camera images, from a camera whose parameters are unknown. We propose a learnable axisymmetric camera model which accepts distorted spherical camera images with two fisheye camera images…
In this paper, we present a multi-camera visual odometry (VO) system for an autonomous vehicle. Our system mainly consists of a virtual LiDAR and a pose tracker. We use a perspective transformation method to synthesize a surround-view image from undistorted fisheye camera images. With a semantic segmentation model, the free space can be extracted. The scans of the virtual LiDAR are generated by discretizing the contours of the free space. As for the pose tracker, we propose a visual odometry system fusing both the feature matching and the virtual LiDAR scan matching results. Only those feature…
Centre for Research and Technology Hellas（希腊研究与技术中心）；Universidad Politécnica de Madrid（马德里理工大学）
Spherical cameras capture scenes in a holistic manner and have been used for room layout estimation. Recently, with the availability of appropriate datasets, there has also been progress in depth estimation from a single omnidirectional image. While these two tasks are complementary, few works have been able to explore them in parallel to advance indoor geometric perception, and those that have done so either relied on synthetic data, or used small scale datasets, as few options are available that include both layout annotations and dense depth maps in real scenes. This is partly due to the ne…
In this paper, we cover the process of integrating Large-Scale Direct Simultaneous Localization and Mapping (LSD-SLAM) algorithm into our existing AR stereo engine, developed for our modified "Augmented Reality Oculus Rift". With that, we are able to track one of our realworld cameras which are mounted on the rift, within a complete unknown environment. This makes it possible to achieve a constant and full augmentation, synchronizing our 3D movement (x, y, z) in both worlds, the real world and the virtual world. The development for the basic AR setup using the Oculus Rift DK1 and two fisheye c…
The University of Tokyo（东京大学）；Chiba Institute of Technology（千叶工业大学）；Tohoku University（东北大学）
In this study, we present a method for all-around depth estimation from multiple omnidirectional images for indoor environments. In particular, we focus on plane-sweeping stereo as the method for depth estimation from the images. We propose a new icosahedron-based representation and ConvNets for omnidirectional images, which we name "CrownConv" because the representation resembles a crown made of origami. CrownConv can be applied to both fisheye images and equirectangular images to extract features. Furthermore, we propose icosahedron-based spherical sweeping for generating the cost volume on …
In this paper, we describe a method to capture nearly entirely spherical (360 degree) depth information using two adjacent frames from a single spherical video with motion parallax. After illustrating a spherical depth information retrieval using two spherical cameras, we demonstrate monocular spherical stereo by using stabilized first-person video footage. Experiments demonstrated that the depth information was retrieved on up to 97% of the entire sphere in solid angle. At a speed of 30 km/h, we were able to estimate the depth of an object located over 30 m from the camera. We also reconstruc…
360DVO: Deep Visual Odometry for Monocular 360-Degree Camera
Division of Integrative Systems and Design, Hong Kong University of Science and Technology（整合系统与设计系，香港科学与技术大学）；Department of Computer Science and Engineering, Hong Kong University of Science and Technology（计算机科学与工程系，香港科学与技术大学）；Department of Ocean Science, Hong Kong University of Science and Technology（海洋科学系，香港科学与技术大学）
Centre for Research and Technology Hellas (CERTH)（希腊研究与技术中心（CERTH））；Information Technologies Institute (ITI)（信息技术研究所（ITI））
Recent work on depth estimation up to now has only focused on projective images ignoring 360 content which is now increasingly and more easily produced. We show that monocular depth estimation models trained on traditional images produce sub-optimal results on omnidirectional images, showcasing the need for training directly on 360 datasets, which however, are hard to acquire. In this work, we circumvent the challenges associated with acquiring high quality 360 datasets with ground truth depth annotations, by re-using recently released large scale 3D datasets and re-purposing them to 360 via r…
School of Electronics and Communication Engineering, Sun Yat-sen University（中山大学电子与通信工程学院）；University of Western Australia（西澳大利亚大学）；Alibaba Group（阿里巴巴集团）
A main challenge for tasks on panorama lies in the distortion of objects among images. In this work, we propose a Distortion-Aware Monocular Omnidirectional (DAMO) dense depth estimation network to address this challenge on indoor panoramas with two steps. First, we introduce a distortion-aware module to extract calibrated semantic features from omnidirectional images. Specifically, we exploit deformable convolution to adjust its sampling grids to geometric variations of distorted objects on panoramas and then utilize a strip pooling module to sample against horizontal distortion introduced by…
OmniAct3D: Leveraging Foundation Geometry and Evidence-Grounded Reasoning for Panoramic 3D Detection
Hunan University（湖南大学）；National Engineering Research Center of Robot Visual Perception and Control Technology（国家机器人视觉感知与控制技术工程研究中心）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）
