We implement a broadly tunable phase shifter for microwaves based on superconducting quantum interference devices (SQUIDs) and study it both experimentally and theoretically. At different frequencies, a unit transmission coefficient, $|S_{21}|=1$, can be theoretically achieved along a curve where the phase shift is controllable by magnetic flux. The fabricated device consists of three equidistant SQUIDs interrupting a transmission line. We model each SQUID embedded at different positions along the transmission line with two parameters, capacitance and inductance, the values of which we extract from the experiments. In our experiments, the tunability of the phase shift varies from from $0.07\timesπ$ to $0.14\timesπ$ radians along the full-transmission curve with the input frequency ranging from 6.00 to 6.28~GHz. The reported measurements are in good agreement with simulations, which is promising for future design work of phase shifters for different applications.
Optical phase shifters are extensively used in integrated optics not only for telecom and datacom applications, but also for sensors and quantum computing. While various active solutions have been demonstrated, progress in passive phase shifters is still lacking. Here, we present a new type of ultra-broadband 90° phase shifter, which exploits the anisotropy and dispersion engineering in subwavelength metamaterial waveguides. Our Floquet-Bloch calculations predict a phase shift error below $\pm$1.7° over an unprecedented operation range from 1.35 $μ$m to 1.75 $μ$m, i.e. 400 nm bandwidth coverin…
Technical University of Munich（慕尼黑工业大学）；Politecnico di Milano（米兰理工大学）；Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau（莱茵兰-普法尔茨技术大学凯泽斯劳滕-兰道分校）；Pázmány Péter Catholic University（帕兹马尼·彼得天主教大学）；Nokia Bell Labs, Nokia Corporation（诺基亚贝尔实验室，诺基亚公司）
In this paper, a broadband tunable polarization converter based on graphene metasurfaces is proposed. This polarization converter works in the terahertz (THz) frequency region, using the advantage of graphene characteristics to have a tunable frequency response. The designed graphene-shaped periodic structure on top of the substrate is utilized to convert the incident wave polarization to the desired target in a flexible operational band in the THz frequencies. The polarization conversion ratio is more than 0.85 in a wide range of frequencies in the THz band from 4.86 to 8.42 THz (the fraction…
We present an asymmetric bifacial graphene metasurface to realize tunable and broadband coherent perfect absorption (CPA) at terahertz (THz) frequencies. The proposed design is composed of two dissimilar graphene square patch metasurfaces stacked over an ultrathin dielectric substrate. Nonlinear CPA performance without resorting to optical nonlinearities and amplification are demonstrated based on wave interference phenomena taking place along and inside this subwavelength structure. Broadband asymmetric reflection from opposite directions is obtained in the case of single wave illumination. T…
We report the first demonstration of integrated electro-optic (EO) phase shifters based on racetrack microresonators on a 3C-silicon-carbide-on-insulator (SiCOI) platform working at near-infrared (NIR) wavelengths. By applying DC voltage in the crystalline axis perpendicular to the waveguide plane, we have observed optical phase shifts from the racetrack microresonators whose loaded quality (Q) factors are ~ 30,000. We show voltage length-product (V$π$${\cdot}$L$π$) of 118 V${\cdot}$cm, which corresponds to an EO coefficient r$_{41}$ of 2.6 pm/V. The SiCOI platform can be used to realize tunab…
Aligned, densely-packed carbon nanotube metamaterials prepared using vacuum filtration are an emerging infrared nanophotonic material. We report multiple hyperbolic plasmon resonances, together spanning the mid-infrared, in individual resonators made from aligned and densely-packed carbon nanotubes. In the first near-field scanning optical microscopy (NSOM) imaging study of nanotube metamaterial resonators, we observe distinct deeply-subwavelength field profiles at the fundamental and higher-order resonant frequencies. The wafer-scale area of the nanotube metamaterials allows us to combine thi…
Cylindrical vector beams (CVBs), which possesses polarization distribution of rotational symmetry on the transverse plane, can be developed in many optical technologies. Conventional methods to generate CVBs contain redundant interferometers or need to switch among diverse elements, thus being inconvenient in applications containing multiple CVBs. Here we provide a passive polarization-selective device to substitute interferometers and simplify generation setup. It is accomplished by reversing topological charges of orbital angular momentum based on polarization-selective Gouy phase. In the pr…
Here we demonstrate an on-chip electro-optic frequency shifter that is precisely controlled using only a single-tone microwave signal. This is accomplished by engineering the density of states of, and coupling between, optical modes in ultra-low loss electro-optic waveguides and resonators realized in lithium niobate nanophotonics. Our device provides frequency shifts as high as 28 GHz with measured shift efficiencies of ~99% and insertion loss of <0.5 dB. Importantly, the device can be reconfigured as a tunable frequency-domain beam splitter, in which the splitting ratio and splitting frequen…
We demonstrate an RF photonic fractional Hilbert transformer based on an integrated Kerr micro-comb source featuring a record low free spectral range of 48.9 GHz, yielding 75 microcomb lines across the C-band. By programming and shaping the comb lines according to calculated tap weights, we demonstrate that the Hilbert transformer can achieve tunable bandwidths ranging from 1.2 to 15.3 GHz, switchable centre frequencies from baseband to 9.5 GHz, and arbitrary fractional orders. We experimentally characterize the RF amplitude and phase response of the tunable bandpass and lowpass Hilbert transf…
Paper offers a low-cost and widely available substrate for electronics. It posses alternative characteristics to silicon, as it shows low density and high-flexibility, together with biodegradability. Solution processable materials, such as hybrid perovskites, also present light and flexible features, together with a huge tunability of the material composition with varying optical properties. In this study, we combine paper substrates with halide-mixed perovskites for the creation of low-cost and easy-to-fabricate perovskite-on-paper photodetectors with a broadband-tunable spectral response. Fr…
The fusion of metasurface antennas and computational imaging facilitates the design of microwave imaging systems which require no lenses, phase shifters or moving parts. The technique involves the generation of appropriately designed diverse measurement modes to encode the scene information into a small number of measurements. We propose a novel boundary-tunable parallel plate waveguide-based metasurface antenna for computational microwave imaging. The proposed antenna leverages a switchable boundary of two layers of vias, to efficiently change the waveguide modes supported by the antenna cavi…
Recent progress in the synthesis of highly stable, eco-friendly, cost-effective transition metal-dichalcogenides (TMDC) quantum dots (QDs) with their broadband absorption spectrum and wavelength selectivity features have led to their increasing use in broadband photodetectors. With the solution based processing, we demonstrate a super large (~ 0.75 mm^2), UV-Vis broadband (365-633 nm), phototransistor made of WS_2 QDs decorated CVD graphene as active channel with extraordinary stability and durability in ambient condition (without any degradation of photocurrent till 4 months after fabrication…
Recent studies have developed tunable topological elastic metamaterials to maximize performance in the presence of varying external conditions, adapt to changing operating requirements, and enable new functionalities such as a programmable wave path. However, a challenge remains to achieve a tunable topological metamaterial that is comprehensively adaptable in both the frequency and spatial domains and is effective over a broad frequency bandwidth that includes a subwavelength regime. To advance the state of the art, this research presents a piezoelectric metamaterial with the capability to co…
Optical harmonic generation occurs when high intensity light ($>10^{10}$W/m$^{2}$) interacts with a nonlinear material. Electrical control of the nonlinear optical response enables applications such as gate-tunable switches and frequency converters. Graphene displays exceptionally strong-light matter interaction and electrically and broadband tunable third order nonlinear susceptibility. Here we show that the third harmonic generation efficiency in graphene can be tuned by over two orders of magnitude by controlling the Fermi energy and the incident photon energy. This is due to logarithmic re…
Visible and infrared photons can be detected with a broadband response via the internal photoeffect. By using plasmonic nanostructures, i.e. nanoantennas, wavelength selectivity can be introduced to such detectors through geometry-dependent resonances. Also, additional functionality, like electronic responsivity switching and polarization detection have been realized. However, previous devices consisted of large arrays of nanostructures to achieve detectable photocurrents. Here we show that this concept can be scaled down to a single antenna level, resulting in detector dimensions well below t…
Electro-optic modulators provide a key function in optical transceivers and increasingly in photonic programmable Application Specific Integrated Circuits (ASICs) for machine learning and signal processing. However, both foundry ready silicon based modulators and conventional material based devices utilizing Lithium niobate fall short in simultaneously providing high chip packaging density and fast speed. Current driven ITO based modulators have the potential to achieve both enabled by efficient light matter interactions. Here, we introduce micrometer compact Mach Zehnder Interferometer (MZI) …
Metamaterials have recently established a new paradigm for enhanced light absorption in state-of-the-art photodetectors. Here, we demonstrate broadband, highly efficient, polarization-insensitive, and gate-tunable photodetection at room temperature in a novel metadevice based on gold/graphene Sierpinski carpet plasmonic fractals. We observed an unprecedented internal quantum efficiency up to 100% from the near-infrared to the visible range with an upper bound of optical detectivity of $10^{11}$ Jones and a gain up to $10^{6}$, which is a fingerprint of multiple hot carriers photogenerated in g…
The energy consumption of buildings is increasing at a rapid pace due to urbanization, while net-zero energy buildings powered by renewable sources offer a green and sustainable solution. However, the limited rooftop space available on skyscrapers and multi-story buildings poses a challenge for large-scale integration of solar photovoltaic modules. Conventional photovoltaics solutions such as silicon solar panels block the visible light from entering the building rending them unfeasible to cover all building surfaces. Here, we demonstrate a novel dielectric metasurface (based-on silicon nitrid…
Increasing attention on microwave ultra-broadband metamaterial absorbers has been paid due to their promising applications. While most microwave ultra-broadband metamaterial absorbers developed so far are based on metallic resonant structures, dispersive dielectric water-based metamaterial opens a simpler and more versatile route for the construction of polarization- and angle- insensitive ultra-broadband absorption. Here, we review the recent progresses of water-based metamaterial absorber by providing an illustration of the mechanisms to realize ultra-broadband, tunable and multi-functional …
Photonic integration, advanced functionality, reconfigurability, and high RF performance are key features in integrated microwave photonic systems that are still difficult to achieve simultaneously. In this work, we demonstrate an integrated microwave photonic circuit that can be reconfigured for two distinct RF functions, namely, a tunable notch filter and a phase shifter. We achieved $>$50dB high-extinction notch filtering over 6-16 GHz and 2$π$ continuously tunable phase shifting over 12-20 GHz frequencies. At the same time, we implemented an on-chip linearization technique to achieve a spu…
