We report on the effect of sp3 hybridized carbon atoms in acene derivatives adsorbed on metal surfaces, namely decoupling the molecules from the supporting substrates. In particular, we have used a Ag(100) substrate and hydrogenated heptacene molecules, in which the longest conjugated segment determining its frontier molecular orbitals amounts to five consecutive rings. The non-planarity that the sp3 atoms impose on the carbon backbone results in electronically decoupled molecules, as demonstrated by the presence of charging resonances in dI/dV tunneling spectra and the associated double tunneling barriers, or in the Kondo peak that is due to a net spin S=1/2 of the molecule as its LUMO becomes singly charged. The spatially dependent appearance of the charging resonances as peaks or dips in the differential conductance spectra is further understood in terms of the tunneling barrier variation upon molecular charging, as well as of the different orbitals involved in the tunneling process.
Organic electronic materials have potential applications in a number of low-cost, large area electronic devices such as flat panel displays and inexpensive solar panels. Small molecules in the series Anthracene, Tetracene, Pentacene, are model molecules for organic semiconductor thin films to be used as the active layers in such devices. This has motivated a number of studies of polyacene thin film growth and structure. Although the majority of these studies rely on vapor-deposited films, solvent-based deposition of films with improved properties onto non-crystalline substrates is desired for …
The application of graphene in electronic devices requires large scale epitaxial growth. The presence of the substrate, however, usually reduces the charge carrier mobility considerably. We show that it is possible to decouple the partially sp3-hybridized first graphitic layer formed on the Si-terminated face of silicon carbide from the substrate by gold intercalation, leading to a completely sp2-hybridized graphene layer with improved electronic properties.
Intercalation of alkali atoms within the lamellar transition metal dichalcogenides is a possible route toward a new generation of batteries. It is also a way to induce structural phase transitions authorizing the realization of optical and electrical switches in this class of materials. The process of intercalation has been mostly studied in three-dimensional dichalcogenide films. Here, we address the case of a single-layer of molybdenum disulfide (MoS$_2$), deposited on a gold substrate, and intercalated with cesium (Cs) in ultra-clean conditions (ultrahigh vacuum). We show that intercalation…
We study the magnetic coupling between different ferromagnetic metals (FMs) across a graphene (G) layer, and the role of graphene as a thin covalent spacer. Starting with G grown on a FM substrate (Ni or Co), we deposit on top at room temperature different FM metals (Fe, Ni, Co). By measuring the dichroic effect of 3p photoemission lines we detect the magnetization of the substrate and the sign of the exchange coupling in FM overlayer at room temperature. We show that the G layer magnetically decouples the FM metals.
When epitaxial graphene layers are formed on SiC(0001), the first carbon layer (known as the "buffer layer"), while relatively easy to synthesize, does not have the desirable electrical properties of graphene. The conductivity is poor due to a disruption of the graphene pi-bands by covalent bonding to the SiC substrate. Here we show that it is possible to restore the graphene pi-bands by inserting a thin oxide layer between the buffer layer and SiC substrate using a low temperature, CMOS-compatible process that does not damage the graphene layer.
Large-area and high-quality single-layer transition metal dichalcogenides can be synthesized by epitaxial growth on single-crystal substrates. An important advantage of this approach is that the interaction between the single-layer and the substrate can be strong enough to enforce a single crystalline orientation of the layer. On the other hand, the same interaction can lead to hybridization effects, resulting in the deterioration of the single-layer's native properties. This dilemma can potentially be solved by decoupling the single-layer from the substrate surface after the growth via interc…
High quality epitaxial graphene films can be applied as templates for tailoring graphene-substrate interfaces that allow for precise control of the charge carrier behavior in graphene through doping and many-body effects. By combining scanning tunneling microscopy, angle-resolved photoemission spectroscopy and density functional theory we demonstrate that oxygen intercalated epitaxial graphene on Ir(111) has high structural quality, is quasi free-standing, and shows signatures of many-body interactions. Using this system as a template, we show that tunable pn-junctions can be patterned by adso…
We performed a scanning tunneling microscopy and spectroscopy (STM/STS) study on the electronic structures of of root(3)Xroot(3)-silicene on Ag(111). We find that the coupling strength of root(3)Xroot(3)-silicene with Ag(111) substrate is variable at different regions, giving rise to notable effects in experiments. These evidences of decoupling or variable interaction of silicene with the substrate are helpful to in-depth understanding of the structure and electronic properties of silicene.
We show that strong coupling between graphene and the substrate is mitigated when 0.8 monolayer of Na is adsorbed and consolidated on top graphene-on-Ni(111). Specifically, the π state is partially restored near the K-point and the energy gap between the π and π* states reduced to 1.3 eV after adsorption, as measured by angle-resolved photoemission spectroscopy. We show that this change is not caused by intercalation of Na to underneath graphene but it is caused by an electronic coupling between Na on top and graphene. We show further that graphene can be decoupled to a much higher extent when…
Long spin relaxation times are a prerequisite for the use of spins in data storage or nanospintronics technologies. An atomic-scale solid-state realization of such a system is the spin of a transition metal atom adsorbed on a suitable substrate. For the case of a metallic substrate, which enables directly addressing the spin by conduction electrons, the experimentally measured lifetimes reported to date are on the order of only hundreds of femtoseconds. Here, we show that the spin states of iron atoms adsorbed directly on a conductive platinum substrate have an astonishingly long spin relaxati…
We present a method for decoupling epitaxial graphene grown on SiC(0001) by intercalation of a layer of fluorine at the interface. The fluorine atoms do not enter into a covalent bond with graphene, but rather saturate the substrate Si bonds. This configuration of the fluorine atoms induces a remarkably large hole density of p \approx 4.5 \times 1013 cm-2, equivalent to the location of the Fermi level at 0.79 eV above the Dirac point ED .
Electronic decoupling of graphene from metallic and semiconducting substrates via intercalation of different species is one of the widely used approaches in studies of graphene. In the present work the modification of the electronic and magnetic properties of graphene on ferromagnetic Ni(111) layer via intercalation of halogen atoms (X = F, Cl, Br) is studied using the state-of-the-art density-functional theory approach. It is found that in all gr/X/Ni(111) intercalation systems a graphene layer is fully electronically decoupled from the ferromagnetic substrate; however, different kind (electr…
Alkali metal atoms (Li, Na, K, Rb, Cs), dimers and (2$\times$2) monolayers on a graphite (0001) surface have been studied using density functional theory, pseudopotentials, and a periodic substrate. The adatoms bind at the hollow site (graphite hexagon), with Li lying closest to (1.84 Å) and Cs farthest (3.75 Å) from the surface. The adsorption energies range between $0.55-1.21$ eV, and the energy ordering of the alkali adatoms is Li$>$Cs$\ge$Rb$\ge$K$>$Na. The small diffusion barriers (0.02-0.21 eV for the C-C bridge) decrease as the atom size increases, indicating a flat potential energy sur…
We present a fast and efficient tight-binding (TB) method for simulating scanning tunneling microscopy (STM) imaging of adsorbate molecules on ultrathin insulating films. Due to the electronic decoupling of the molecule from the metal surface caused by the presence of the insulating overlayer, the STM images of the frontier molecular orbitals can be simulated using a very efficient scheme, which also enables the analysis of phase shifts in the STM current. Au-pentacene complex adsorbed on a NaCl bilayer on Cu substrate provides an intricate model system, which has been previously studied both …
In molecular nanotechnology, a single molecule is envisioned to act as the basic building block of electronic devices. Such devices may be of special interest for organic photovoltaics, data storage, and smart materials. However, more often than not the molecular function is quenched upon contact with a conducting support. Trial-and-error-based decoupling strategies via molecular functionalisation and change of substrate have in many instances proven to yield unpredictable results. The adsorbate-substrate interactions that govern the function can be understood with the help of first-principles…
Epitaxial silicene, which is one single layer of silicon atoms packed in a honeycomb structure, demonstrates a strong interaction with the substrate that dramatically affects its electronic structure. The role of electronic coupling in the chemical reactivity between the silicene and the substrate is still unclear so far, which is of great importance for functionalization of silicene layers. Here, we report the reconstructions and hybridized electronic structures of epitaxial 4x4 silicene on Ag(111), which are revealed by scanning tunneling microscopy and angle-resolved photoemission spectrosc…
Decoupling of the graphene layer from the ferromagnetic substrate via intercalation of sp metal has recently been proposed as an effective way to realize single-layer graphene-based spin-filter. Here, the structural and electronic properties of the prototype system, graphene/Al/Ni(111), are investigated via combination of electron diffraction and spectroscopic methods. These studies are accompanied by state-of-the-art electronic structure calculations. The properties of this prospective Al-intercalation-like system and its possible implementations in future graphene-based devices are discussed…
Interfacial Coupling and Sparse Intercalation of 7-Atom-Wide Armchair Graphene Nanoribbons by N-Heterocyclic Carbene Monolayers
Empa - Swiss Federal Laboratories for Materials Science and Technology（瑞士联邦材料科学与技术研究院）；Max Planck Institute of Microstructure Physics（马克斯·普朗克微观结构物理研究所）；Technische Universität Dresden（德累斯顿工业大学）；University of Chinese Academy of Science（中国科学院大学）
