Terahertz (THz) communication is now being considered as one of possible technologies for the sixth generation (6G) communication systems. In this paper, a novel three-dimensional (3D) space-time-frequency non-stationary massive multiple-input multiple-output (MIMO) channel model for 6G THz indoor communication systems is proposed. In this geometry-based stochastic model (GBSM), the initialization and evolution of parameters in time, space, and frequency domains are developed to generate the complete channel transfer function (CTF). Based on the proposed model, the correlation functions including time auto-correlation function (ACF), spatial crosscorrelation function (CCF), and frequency correlation function (FCF) are investigated. The results show that the statistical properties of the simulation model match well with those of the theoretical model. The stationary intervals at different frequencies are simulated. The non-stationarity in time, space, and frequency domains is verified by theoretical derivations and simulations.
Compressed sensing (CS) deals with the problem of reconstructing a sparse vector from an under-determined set of observations. Approximate message passing (AMP) is a technique used in CS based on iterative thresholding and inspired by belief propagation in graphical models. Due to the high transmission rate and a high molecular absorption, spreading loss and reflection loss, the discrete-time channel impulse response (CIR) of a typical indoor THz channel is very long and exhibits an approximately sparse characteristic. In this paper, we develop AMP based channel estimation algorithms for indoo…
This paper presents selected results from a channel measurement campaign conducted in a shopping mall scenario at 158 GHz. The focus is on the statistical analysis of the collected measurement data in terms of directional channel gain. Although most power is received from the line-of-sight (LOS) direction, significant multipaths arrive from all measured azimuth directions. The median of the sorted directional channel gain can be approximated by a linear curve showing an offset of about 10 dB with respect to the LOS direction.
With the fifth-generation (5G) networks widely commercialized and fast deployed, the sixth-generation (6G) wireless communication is envisioned to provide competitive quality of service (QoS) in multiple aspects to global users. The critical and underlying research of the 6G is, firstly, highly dependent on the precise modeling and characterization of the wireless propagation when the spectrum is believed to expand to the terahertz (THz) domain. Moreover, future networks' power consumption and energy efficiency are critical factors to consider. In this research, based on a review of the fundam…
The increasing demand for ultra-high throughput in ultra-dense networks might take a toll on 5G capacity. Moreover, with Internet-of-Things (IoT) and the growing use-cases for indoor killer-applications, it will be necessary to look beyond 5G technologies. One such promising technology is to move higher in the frequencies, such as the THz ($300$ $GHz$-$10$ $THz$) spectrum. THz has a massive number of greenfield-contiguous channels ranging from $10$ $GHz$ to $200$ $GHz$ (best case), which was not available in the traditional radio frequency (RF) or millimeter wave (mmWave) bands. Although THz h…
Terahertz (THz) communication is gaining more interest as one of the envisioned enablers of high-data-rate short-distance indoor applications in beyond 5G networks. Moreover, non-orthogonal multiple-access (NOMA)-enabled schemes are promising schemes to realize the target spectral efficiency, low latency, and user fairness requirements in future networks. In this paper, an energy-efficient cooperative NOMA (CNOMA) scheme that guarantees the minimum required rate for the cell-edge users in an indoor THz-MISO communications network is proposed. The proposed cooperative scheme consists of three s…
Ultra-densification of user equipment (UE) and access points (APs) are anticipated to take a toll on the future spectrum needs. Higher frequency bands, such as mmWave ($30$-$300GHz$) and THz spectrum ($0.3$-$10THz$), can be used to cater to the high-throughput needs of ultra-dense networks. These high-frequency bands have a tremendous amount of \textit{green-filed contiguous spectrum}, ranging in hundreds of $GHz$. However, these bands, especially the THz bands, face numerous challenges, such as high spreading, absorption, and penetration losses. To combat these challenges, the THz-APs need to…
Despite such challenges as high path loss and equipment cost, THz communication is becoming one of the potentially viable means through which ultra-high data rate can be achieved. To compensate for the high path loss, we present parameter modeling for indoor THz communication. To maximize efficient and opportunistic use of resources, we analyze the potential workarounds for a single access point to satisfy most of the mobile terminals by varying such parameters as humidity, distance, frequency windows, beamwidths, antenna placement, and user mobility type. One promising parameter is antenna be…
A Hybrid Near-field Indoor Channel Model for THz Bands Based on Surface Scattering Characteristics
National Mobile Communications Research Laboratory, School of Information Science and Engineering, Southeast University（东南大学信息科学与工程学院国家移动通信实验室）；Purple Mountain Laboratories（紫金山实验室）
Physical-layer security (PLS) for industrial indoor terahertz (THz) wireless communication applications is considered. We use a similar model as being employed for additive white Gaussian noise (AWGN) wireless communication channels. A cell communication and a directed communication scenario are analyzed to illustrate the achievable semantic security guarantees for a wiretap channel with finite-blocklength THz-wireless communication links. We show that weakly directed transmitter (Alice) antennas, which allow cell-type communication with multiple legitimate receivers (Bobs) without adaptation …
Millimeter-wave (mmWave) and terahertz (THz) spectrum can support significantly higher data rates compared to lower frequency bands and hence are being actively considered for 5G wireless networks and beyond. These bands have high free-space path loss (FSPL) in line-of-sight (LOS) propagation due to their shorter wavelength. Moreover, in non-line-of-sight (NLOS) scenario, these two bands suffer higher penetration loss than lower frequency bands which could seriously affect the network coverage. It is therefore critical to study the NLOS penetration loss introduced by different building materia…
In this paper, a novel three-dimensional (3D) space-time-frequency (STF) non-stationary geometry-based stochastic model (GBSM) is proposed for the sixth generation (6G) terahertz (THz) wireless communication systems. The proposed THz channel model is very general having the capability to capture different channel characteristics in multiple THz application scenarios such as indoor scenarios, device-to-device (D2D) communications, ultra-massive multiple-input multiple-output (MIMO) communications, and long traveling paths of users. Also, the generality of the proposed channel model is demonstra…
Terahertz (THz) communication is now being considered as one of possible technologies for the sixth generation (6G) wireless communication systems. In this paper, a novel three-dimensional (3D) space-time-frequency non-stationary theoretical channel model is first proposed for 6G THz wireless communication systems employing ultra-massive multiple-input multiple-output (MIMO) technologies with long traveling paths. Considering frequency-dependent diffuse scattering, which is a special property of THz channels different from millimeter wave (mmWave) channels, the relative angles and delays of ra…
Terahertz spectrum is being researched upon to provide ultra-high throughput radio links for indoor applications, e.g., virtual reality (VR), etc. as well as outdoor applications, e.g., backhaul links, etc. This paper investigates a monopulse-based beam tracking approach for limited mobility users relying on sparse massive multiple input multiple output (MIMO) wireless channels. Owing to the sparsity, beamforming is realized using digitally-controlled radio frequency (RF) / intermediate-frequency (IF) phase shifters with constant amplitude constraint for transmit power compliance. A monopulse-…
The visible light communication (VLC) technology has attracted much attention in the research of the sixth generation (6G) communication systems. In this paper, a novel three dimensional (3D) space-time-frequency non-stationary geometry-based stochastic model (GBSM) is proposed for indoor VLC channels. The proposed VLC GBSM can capture unique indoor VLC channel characteristics such as the space-time-frequency non-stationarity caused by large light-emitting diode (LED) arrays in indoor scenarios, long travelling paths, and large bandwidths of visible light waves, respectively. In addition, the …
Due to the indoor none-line-of-sight (NLoS) propagation and multi-access interference (MAI), it is a great challenge to achieve centimeter-level positioning accuracy in indoor scenarios. However, the sixth generation (6G) wireless communications provide a good opportunity for the centimeter-level positioning. In 6G, the millimeter wave (mmWave) and terahertz (THz) communications have ultra-broad bandwidth so that the channel state information (CSI) will have a high resolution. In this paper, a weighted random forest (WRF) based indoor positioning algorithm using CSI based channel fingerprint f…
Millimeter-wave (mmWave) and Terahertz (THz) will be used in the sixth-generation (6G) wireless systems, especially for indoor scenarios. This paper presents an indoor three-dimensional (3-D) statistical channel model for mmWave and sub-THz frequencies, which is developed from extensive channel propagation measurements conducted in an office building at 28 GHz and 140 GHz in 2014 and 2019. Over 15,000 power delay profiles (PDPs) were recorded to study channel statistics such as the number of time clusters, cluster delays, and cluster powers. All the parameters required in the channel generatio…
While mm-wave systems are a mainstay for 5G communications, the inexorable increase of data rate requirements and user densities will soon require the exploration of next-generation technologies. Among these, Terahertz (THz) band communication seems to be a promising direction due to availability of large bandwidth in the electromagnetic spectrum in this frequency range, and the ability to exploit its directional nature by directive antennas with small form factors. The first step in the analysis of any communication system is the analysis of the propagation channel, since it determines the fu…
We derive new expressions for the connection probability and the average ergodic capacity to evaluate the performance achieved by multi-connectivity (MC) in an indoor ultra-wideband terahertz (THz) communication system. In this system, the user is affected by both self-blockage and dynamic human blockers. We first build up a three-dimensional propagation channel in this system to characterize the impact of molecular absorption loss and the shrinking usable bandwidth nature of the ultra-wideband THz channel. We then carry out new performance analysis for two MC strategies: 1) Closest line-of-si…
Light-fidelity (LiFi) is a fully-networked bidirectional optical wireless communication (OWC) that is considered a promising solution for high-speed indoor connectivity. Unlike in conventional radio frequency wireless systems, the OWC channel is not isotropic, meaning that the device orientation affects the channel gain significantly. However, due to the lack of proper channel models for LiFi systems, many studies have assumed that the receiver is vertically upward and randomly located within the coverage area, which is not a realistic assumption from a practical point of view. In this paper, …
Light-fidelity (LiFi) is a fully-networked bidirectional optical wireless communication (OWC) that is considered a promising solution for high-speed indoor connectivity. Unlike in conventional radio frequency wireless systems, the OWC channel is not isotropic, meaning that the device orientation affects the channel gain significantly. However, due to the lack of proper channel models for LiFi systems, many studies have assumed that the receiver is vertically upward and randomly located within the coverage area, which is not a realistic assumption from a practical point of view. In this paper, …
Channel Parameter Estimation and Characteristic Analysis at THz Bands in Hybrid Near-Field/Far-Field Scenarios
Shandong University（山东大学）；Southeast University（东南大学）；National Mobile Communications Research Laboratory, Southeast University（东南大学移动通信国家重点实验室）；Purple Mountain Laboratories（紫金山实验室）；University of Tabuk（塔布克大学）
Benefiting from the ultra-wide bandwidth, terahertz (THz) communication is becoming a promising technology for future 6G networks. For THz communication, precoding is an essential technique to overcome the severe path loss of THz signals in order to support the desired coverage. In this article, we systematically investigate the dominant THz precoding techniques for future 6G networks, with the highlight on its key challenges and opportunities. Specifically, we first illustrate three typical THz application scenarios including indoor, mobile, and satellite communications. Then, the major diffe…
With the development of the Internet of Things technology, indoor tracking has become a popular application nowadays, but most existing solutions can only work in line-of-sight scenarios, or require regular re-calibration. In this paper, we propose WiBall, an accurate and calibration-free indoor tracking system that can work well in non-line-of-sight based on radio signals. WiBall leverages a stationary and location-independent property of the time-reversal focusing effect of radio signals for highly accurate moving distance estimation. Together with the direction estimation based on inertial …
Wireless communications over Terahertz (THz)-band frequencies are vital enablers of ultra-high rate applications and services in sixth-generation (6G) networks. However, THz communications suffer from poor coverage because of inherent THz features such as high penetration losses, severe path loss, and significant molecular absorption. To surmount these critical challenges and fully exploit the THz band, we explore a coexisting radio frequency (RF) and THz finite indoor network in which THz small cells are deployed to provide high data rates, and RF macrocells are deployed to satisfy coverage r…
Sub-Terahertz (THz) frequencies between 100 GHz and 300 GHz are being considered as a key enabler for the sixth-generation (6G) wireless communications due to the vast amounts of unused spectrum. The 3rd Generation Partnership Project (3GPP) included the indoor industrial environments as a scenario of interest since Release 15. This paper presents recent sub-THz channel measurements using directional horn antennas of 27 dBi gain at 142 GHz in a factory building, which hosts equipment manufacturing startups. Directional measurements with co-polarized and cross-polarized antenna configurations w…
We consider reconfigurable intelligent surface (RIS) aided sixth-generation (6G) terahertz (THz) communications for indoor environment in which a base station (BS) wishes to send independent messages to its serving users with the help of multiple RISs. For indoor environment, various obstacles such as pillars, walls, and other objects can result in no line-of-sight signal path between the BS and a user, which can significantly degrade performance. To overcome such limitation of indoor THz communication, we firstly optimize the placement of RISs to maximize the coverage area. Under the optimize…
Next-generation wireless systems are rapidly evolving from communication-only systems to multi-modal systems with integrated sensing and communications. In this paper a novel joint sensing and communication framework is proposed for enabling wireless extended reality (XR) at terahertz (THz) bands. To gather rich sensing information and a higher line-of-sight (LoS) availability, THz-operated reconfigurable intelligent surfaces (RISs) acting as base stations are deployed. The sensing parameters are extracted by leveraging THz's quasi-opticality and opportunistically utilizing uplink communicatio…
In this paper, a novel three-dimensional (3D) non-stationary geometry-based stochastic model (GBSM) for the fifth generation (5G) and beyond 5G (B5G) systems is proposed. The proposed B5G channel model (B5GCM) is designed to capture various channel characteristics in (B)5G systems such as space-time-frequency (STF) non-stationarity, spherical wavefront (SWF), high delay resolution, time-variant velocities and directions of motion of the transmitter, receiver, and scatterers, spatial consistency, etc. By combining different channel properties into a general channel model framework, the proposed…
We propose a multiple-input multiple-output (MIMO) quantum key distribution (QKD) scheme for terahertz (THz) frequency applications operating at room temperature. Motivated by classical MIMO communications, a transmit-receive beamforming scheme is proposed that converts the rank-$r$ MIMO channel between Alice and Bob into $r$ parallel lossy quantum channels. Compared with existing single-antenna QKD schemes, we demonstrate that the MIMO QKD scheme leads to performance improvements by increasing the secret key rate and extending the transmission distance. Our simulation results show that multip…
