Quantum point contacts (QPC) are fundamental building blocks of nanoelectronic circuits. For their emission dynamics as well as for interaction effects such as the 0.7-anomaly the details of the electrostatic potential are important, but the precise potential shapes are usually unknown. Here, we measure the one-dimensional subband spacings of various QPCs as a function of their conductance and compare our findings with models of lateral parabolic versus hard wall confinement. We find that a gate-defined QPC near pinch-off is compatible with the parabolic saddle point scenario. However, as the number of populated subbands is increased Coulomb screening flattens the potential bottom and a description in terms of a finite hard wall potential becomes more realistic.
The electrostatics of two-dimensional (2D) lateral pn homojunctions considering the impact of electrostatic doping by means of two split bottom-gates are studied here. Analytical expressions are obtained from the solution of the 2D Poisson equation considering a depletion approximation. Straightforward analytical models for the electrostatic potential and the depletion width within both the dielectric and the 2D semiconductor are obtained for both the symmetrical and asymmetrical cases. In contrast to the case of devices with chemical doping, the obtained depletion width model of devices with …
We use numerical simulations to investigate the effect of electrostatics on the source and drain contacts of carbon nanotube field-effect transistors. We find that unscreened charge on the nanotube at the contact-channel interface leads to a potential barrier that can significantly hamper transport through the device. This effect is largest for intermediate gate voltages and for contacts near the ohmic-Schottky crossover, but can be mitigated with a reduction in the gate oxide thickness. These results help to elucidate the important role that contact geometry plays in the performance of carbon…
We investigate the characteristics of purely electrostatic interactions with external gates in constructing full single qubit manipulations. The quantum bit is naturally encoded in the spatial wave function of the electron system. Single-electron{transistor arrays based on quantum dots or insulating interfaces typically allow for electrostatic controls where the inter-island tunneling is considered constant, e.g. determined by the thickness of an insulating layer. A representative array of 3x3 quantum dots with two mobile electrons is analyzed using a Hubbard Hamiltonian and a capacitance matr…
We compare the conductance of an undoped graphene sheet with a small region subject to an electrostatic gate potential for the cases that the dynamics in the gated region is regular (disc-shaped region) and classically chaotic (stadium). For the disc, we find sharp resonances that narrow upon reducing the area fraction of the gated region. We relate this observation to the existence of confined electronic states. For the stadium, the conductance looses its dependence on the gate voltage upon reducing the area fraction of the gated region, which signals the lack of confinement of Dirac quasipar…
Capacitance-voltage (C-V) characteristics are important for understanding fundamental electronic structures and device applications of nanomaterials. The C-V characteristics of graphene nanoribbons (GNRs) are examined using self-consistent atomistic simulations. The results indicate strong dependence of the GNR C-V characteristics on the edge shape. For zigzag edge GNRs, highly non-uniform charge distribution in the transverse direction due to edge states lowers the gate capacitance considerably, and the self-consistent electrostatic potential significantly alters the band structure and carrie…
Distribution of charge induced by a gate voltage in a graphene strip is investigated. We calculate analytically the charge profile and demonstrate a strong(macroscopic) charge accumulation along the boundaries of a micrometers-wide strip. This charge inhomogeneity is especially important in the quantum Hall regime where we predict the doubling of the number of edge states and coexistence of two different types of such states. Applications to graphene-based nanoelectronics are discussed.
We develop a robust and versatile platform to define nanostructures at oxide interfaces via patterned top gates. Using LaAlO$_3$/SrTiO$_3$ as a model system, we demonstrate controllable electrostatic confinement of electrons to nanoscale regions in the conducting interface. The excellent gate response, ultra-low leakage currents, and long term stability of these gates allow us to perform a variety of studies in different device geometries from room temperature down to 50 mK. Using a split-gate device we demonstrate the formation of a narrow conducting channel whose width can be controllably re…
We study 95 split gates of different size on a single chip using a multiplexing technique. Each split gate defines a one-dimensional channel on a modulation-doped GaAs/AlGaAs heterostructure, through which the conductance is quantized. The yield of devices showing good quantization decreases rapidly as the length of the split gates increases. However, for the subset of devices showing good quantization, there is no correlation between the electrostatic length of the one dimensional channel (estimated using a saddle point model), and the gate length. The variation in electrostatic length and th…
A gate-defined quantum dot in bilayer graphene is utilized as a sensitive electrometer for probing the charge density of its environment. Under the influence of a perpendicular magnetic field, the charge carrier density of the channel region next to the quantum dot oscillates due to the formation of Landau levels. This is experimentally observed as oscillations in the gate-voltage positions of the Coulomb resonances of the nearby quantum dot. From the frequency of the oscillations, we extract the charge carrier density in the channel and from the amplitude the shift of the quantum dot potentia…
Coulomb blockade is observed in a graphene nanoribbon device with a top gate. When two pn junctions are formed via the back gate and the local top gate, electrons are confined between the pn junctions which act as the barriers. When no pn junctions are induced by the gate voltages, electrons are still confined, as a result of strong disorder, but in a larger area. Measurements on five other devices with different dimensions yield consistent results.
The transconductance and effective Landé $g^*$ factors for a quantum point contact defined in silicene by the electric field of a split gate is investigated. The strong spin-orbit coupling in buckled silicene reduces the $g^*$ factor for in-plane magnetic field from the nominal value 2 to around 1.2 for the first- to 0.45 for the third conduction subband. However, for perpendicular magnetic field we observe an enhancement of $g^*$ factors for the first subband to 5.8 in nanoribbon with zigzag and to 2.5 with armchair edge. The main contribution to the Zeeman splitting comes from the intrinsic …
Much attention has been focused on ways of rendering graphene semiconducting. We study periodically gated graphene in a tight-binding model and find that, contrary to predictions based on the Dirac equation, it is possible to open a band gap at the Fermi level using electrostatic gating of graphene. However, comparing to other methods of periodically modulating graphene, namely perforated graphene structures, we find that the resulting band gap is significantly smaller. We discuss the intricate dependence of the band gap on the magnitude of the gate potential as well as the exact geometry of t…
We report the fabrication of electrostatically defined nanostructures in encapsulated bilayer graphene, with leakage resistances below depletion gates as high as $R \sim 10~$G$Ω$. This exceeds previously reported values of $R =~$10 - 100 k$Ω$.\cite{Zou2010,Yan2010,Zhu2016a} We attribute this improvement to the use of a graphite back gate. We realize two split gate devices which define an electronic channel on the scale of the Fermi-wavelength. A channel gate covering the gap between the split gates varies the charge carrier density in the channel. We observe device-dependent conductance quanti…
Propagation of an electron wave packet through a quantum point contact (QPC) defined by electrostatic gates in bilayer graphene is investigated. The gates provide a bias between the layers, in order to produce an energy gap. If the gates on both sides of the contact produce the same bias, steps in the electron transmission probability are observed, as in the usual QPC. However, if the bias is inverted on one of the sides of the QPC, only electrons belonging to one of the Dirac valleys are allowed to pass, which provides a very efficient valley filtering.
Analytical solutions describing quantum swap and Hadamard gate are given with the use of tight-binding approximation. Decoherence effects are described analytically for two interacting electrons confined by local potentials with use of tight-binding simplistic model and in Schroedinger formalism with omission of spin degree of freedom. The obtained results can be generalized for the case of N electrostatically interacting quantum bodies confined by local potentials (N-qubit) system representing any electrostatic quantum gate with N1/N-N1 inputs/outputs. The mathematical structure of system evo…
Casimir and electrostatic non-contact friction between two gold plates, and a gold tip and a gold plate, are calculated taking into account the contribution of the electrical double layer. It is shown that in an extreme-near field ($d<10$nm) the contribution from the electrical double layer leads to the enhancement of non-contact friction by many orders of magnitude in comparison to the result of the conventional theory without this contribution. Casimir and electrostatic friction dominate for short and large separations, respectively. The calculated electrostatic friction is in good agreement…
We computationally study the electrostatic potential profile and current carrying capacity of carbon nanotubes as a function of length and diameter. Our study is based on solving the non equilibrium Green's function and Poisson equations self-consistently, including the effect of electron-phonon scattering. A transition from ballistic to diffusive regime of electron transport with increase of applied bias is manifested by qualitative changes in potential profiles, differential conductance and electric field in a nanotube. In the low bias ballistic limit, most of the applied voltage drop occurs…
We describe a method for creating atomic-scale electric contacts. A metal source is deposited on two insulating substrates separated by a 70 nm gap. Electric conductance across the gap is monitored, while protrusions from the bulk extend into the gap and reach corresponding protrusions on the other side of the gap. When the voltage across the gap is large, a pair of corresponding protrusions assembles into a point contact, via equilibrium between electrostatic attraction and a maximum sustained current. The current voltage characteristics of the point contact display crossover from weak link i…
Electrostatic gating is essential for defining and control of semiconducting devices. However, nano-fabrication processes required for depositing gates inevitably degrade the pristine quality of the material of interest. Examples of materials that suffer from such degradation include ultra-high mobility GaAs/AlGaAs two-dimensional electron gases (2DEGs), graphene, topological insulators, and nanowires. To preserve the pristine material properties, we have developed a flip-chip setup where gates are separated from the material by a vacuum, which allows nanoscale electrostatic gating of the mate…
We explore solid electrolytes for electrostatic gating using field-effect transistors (FETs) in which thin WSe$_2$ crystals are exfoliated and transferred onto a lithium-ion conducting glass ceramic substrate. For negative gate voltages ($V_G < 0$) the devices work equally well as ionic liquid gated FETs while offering specific advantages, whereas no transistor action is seen for $V_G>0$. For $V_G <0$ the devices can nevertheless be driven into the ambipolar injection regime by applying a large source-drain bias, and strong electroluminescence is observed when direct band-gap WSe$_2$ monolayer…
Generalized electrostatic quantum swap gate implemented in the chain of 2 double coupled quantum dots using single electron in semiconductor is presented in tight-binding simplistic model specifying both analytic and numerical results. The anticorrelation principle coming from Coulomb electrostatic repulsion is exploited in single electron devices. The formation of quantum entanglement is specified and supported by analytical results. The difference between classical and quantum picture is given. The correlations between geometry of quantum structures and entanglement dynamics are shown in ana…
Various mesoscopic devices exploit electrostatic side gates for their operation. In this paper, we investigate how voltage-biasing of graphene side gates modulates the electrical transport characteristics of graphene channel. We explore myriads of typical side gated devices such as symmetric dual side gates and asymmetric single side gate biasing, in monolayer and bilayer graphene. The side gates modulate the electrostatic doping in the graphene channel whose effect is reflected in transport measurement. This modulation efficiency is systematically characterized for all our devices and agrees …
We theoretically analyze the possibility to confine electrons in single-layer graphene with the help of metallic gates, via the evaluation of the density of states of such a gate-defined quantum dot in the presence of a ring-shaped metallic contact. The possibility to electrostatically confine electrons in a gate-defined ``quantum dot'' with finite-carrier density, surrounded by an undoped graphene sheet, strongly depends on the integrability of the electron dynamics in the quantum dot. With the present calculations we can quantitatively compare confinement in dots with integrable and chaotic …
A scalable tight-binding model is applied for large-scale quantum transport calculations in clean graphene subject to electrostatic superlattice potentials, including two types of graphene superlattices: moiré patterns due to the stacking of graphene and hexagonal boron nitride (hBN) lattices, and gate-controllable superlattices using a spatially modulated gate capacitance. In the case of graphene/hBN moiré superlattices, consistency between our transport simulation and experiment is satisfactory at zero and low magnetic field, but breaks down at high magnetic field due to the adopted simple m…
The magneto-electrostatic tailoring of the supercurrent in quantum point contact ballistic Josephson junctions is demonstrated. An etched InAs-based heterostructure is laterally contacted to superconducting niobium leads and the existence of two etched side gates permits, in combination with the application of a perpendicular magnetic field, to modify continuously the magnetic interference pattern by depleting the weak link. For wider junctions the supercurrent presents a Fraunhofer-like interference pattern with periodicity h/2e whereas by shrinking electrostatically the weak link, the period…
This article aims at providing a self-contained introduction to theoretical modeling of gate-induced carrier density in graphene sheets. For this, relevant theories are introduced, namely, classical capacitance model (CCM), self-consistent Poisson-Dirac method (PDM), and quantum capacitance model (QCM). The usage of Matlab pdetool is also briefly introduced, pointing out the least knowledge required for using this tool to solve the present electrostatic problem. Results based on the three approaches are compared, showing that the quantum correction, which is not considered by the CCM but by th…
We show that when the pseudomagnetic fields created by long wavelength deformations are appropriately coupled with a scalar electric potential, a significant energy gap can emerge due to the formation of a Haldane state. Ramifications of this physical effect are examined through the study of various strain geometries commonly seen in experiments, such as strain superlattices and wrinkled suspended graphene. Of particular technological importance, we consider setup where this gap can be tunable through electrostatic gates, allowing for the design of electronic devices not realizable with other …
The electrostatic potential across a short ballistic molecular conductor depends sensitively on the geometry of its environment, and can affect its conduction significantly by influencing its energy levels and wave functions. We illustrate some of the issues involved by evaluating the potential profiles for a conducting gold wire and an aromatic phenyl dithiol molecule in various geometries. The potential profile is obtained by solving Poisson's equation with boundary conditions set by the contact electrochemical potentials and coupling the result self-consistently with a nonequilibrium Green'…
The binding of clusters of metal nanoparticles is partly electrostatic. We address difficulties in calculating the electrostatic energy when high charging energies limit the total charge to a single quantum, entailing unequal potentials on the particles. We show that the energy at small separation $h$ has a strong logarithmic dependence on $h$. We give a general law for the strength of this logarithmic correction in terms of a) the energy at contact ignoring the charge quantization effects and b) an adjacency matrix specifying which spheres of the cluster are in contact and which is charged. W…
A new fabrication technique is used to produce quantum dots with read-out channels in silicon/silicon-germanium two-dimensional electron gases. The technique utilizes Schottky gates, placed on the sides of a shallow etched quantum dot, to control the electronic transport process. An adjacent quantum point contact gate is integrated to the side gates to define a read-out channel and thus allow for noninvasive detection of the electronic occupation of the quantum dot. Reproducible and stable Coulomb oscillations and the corresponding jumps in the read-out channel resistance are observed at low t…
The dissipation induced by a metallic gate on the low-energy properties of interacting 1D electron liquids is studied. As function of the distance to the gate, or the electron density in the wire, the system undergoes a quantum phase transition from the Tomonaga-Luttinger liquid state to two kinds of dissipative phases, one of them with a finite spatial correlation length. We also define a dual model, which describes an attractive one dimensional metal with a Josephson coupling to a dirty metallic lead.
We use numerical simulations to analyze recent experimental measurements of short-channel carbon nanotube field-effect transistors with palladium contacts. We show that the gate strongly modulates the contact properties, an effect that is distinct from that observed in Schottky barrier carbon nanotube transistors. This modulation of the contacts by the gate allows for the realization of superior subthreshold swings for short channels, and improved scaling behavior. These results further elucidate the behavior of carbon nanotube-metal contacts, and should be useful in the optimization of high-p…
Superconductivity in SrTiO$_3$ occurs at remarkably low carrier densities and therefore, unlike conventional superconductors, can be controlled by electrostatic gates. Here we demonstrate nanoscale weak links connecting superconducting leads, all within a single material, SrTiO$_3$. Ionic liquid gating accumulates carriers in the leads, and local electrostatic gates are tuned to open the weak link. These devices behave as superconducting quantum point contacts with a quantized critical supercurrent. This is a milestone towards establishing SrTiO$_3$ as a single-material platform for mesoscopic…
We experimentally investigate the charge induction mechanism across gated, narrow, ballistic graphene devices with different degrees of edge disorder. By using magnetoconductance measurements as the probing technique, we demonstrate that devices with large edge disorder exhibit a nearly homogeneous capacitance profile across the device channel, close to the case of an infinitely large graphene sheet. In contrast, devices with lower edge disorder (< 1 nm roughness) are strongly influenced by the fringing electrostatic field at graphene boundaries, in quantitative agreement with theoretical calc…
We report on the fabrication and electronic transport characterisation of Schottky-gated strongly confined Si/SiGe quantum point contacts (QPC). At zero magnetic field and T=450mK the QPC conductance as a function of gate voltage shows a quantization in units of e^2/h, indicative of transport through 1D modes which appear to lack both spin and valley degeneracy.
We perform scanning-gate microscopy on a quantum-point contact. It is defined in a high-mobility two-dimensional electron gas of an AlGaAs/GaAs heterostructure, giving rise to a weak disorder potential. The lever arm of the scanning tip is significantly smaller than that of the split gates defining the conducting channel of the quantum-point contact. We are able to observe that the conducting channel is shifted in real space when asymmetric gate voltages are applied. The observed shifts are consistent with transport data and numerical estimations.
Realization of logic circuits from graphene is very attractive for high-speed nanoelectronics. However, the intrinsic ambipolar nature hinders the formation of graphene logic devices with the conventional complementary architecture. Using electrostatic doping modulation, we show here a facile method to control the charge neutrality points and form a complementary-like structure, in which the ambipolar conduction is used as a benefit rather than a drawback to construct logic devices. A band gap is also introduced in the channels to improve the switching ratio of the graphene transistors. For th…
Electromechanical response of solids underpins image formation mechanism of several scanning probe microscopy techniques including the piezoresponse force microscopy (PFM) and electrochemical strain microscopy (ESM). While the theory of linear piezoelectric and ionic responses are well developed, the contributions of quadratic effects including electrostriction and capacitive tip-surface forces to measured signal remain poorly understood. Here we analyze the electrostrictive and capacitive contributions to the PFM and ESM signals and discuss the implications of the dielectric tip-surface gap o…
We analyze electrostatic interaction between a sharp conducting tip and a thin one-dimensional wire, e.g., a carbon nanotube, in a scanned gate microscopy (SGM) experiment. The problem is analytically tractable if the wire resides on a thin dielectric substrate above a metallic backgate. The characteristic spatial scale of the electrostatic coupling to the tip is equal to its height above the substrate. Numerical simulations indicate that imaging of individual electrons by SGM is possible once the mean electron separation exceeds this scale (typically, a few tens of nm). Differences between we…
We have observed hysteresis between the forward and reverse sweeps of a common mode bias applied to the two in-plane side gates of an asymmetrically biased GaAs quantum point contact. The size of the hysteresis loop increases with the amount of bias asymmetry between the two side gates and depends on the polarity of the bias asymmetry. It is argued that hysteresis may constitute another indirect proof of spontaneous spin polarization in the narrow portion of the quantum point contact.
Tailored electrostatic potentials are the foundation of scanning gate microscopy. We present several aspects of the tip-induced potential on the two-dimensional electron gas. First, we give methods on how to estimate the size of the tip-induced potential. Then, a ballistic cavity is formed and studied as a function of the bias-voltage of the metallic top gates and probed with the tip-induced potential. It is shown how the potential of the cavity changes by tuning the system to a regime where conductance quantization in the constrictions formed by the tip and the top gates occurs. This conducta…
We demonstrated that a triple-gated GaAs quantum point contact, which has an additional surface gate between a pair of split gates to strengthen the lateral confinement, produces the well-defined quantized conductance and Fabry-Pérot-type (FP-type) oscillations on it even using a relatively low mobility wafer. A one-dimensional phenomenological model potential was developed to explain the oscillatory behavior. By combining the model calculations and dc bias spectroscopy, we obtained detailed information about the energy scales of the oscillatory structures. The relationships between the FP-typ…
We study the onset of intrinsic bistability and accompanying hysteresis in a single quantum point contact (QPC) with in-plane side gates in the presence of lateral spin-orbit coupling. The hysteresis in the conductance versus common gate voltage applied to the two side gates exists only if the narrow portion of the QPC is long enough. The hysteresis is absent if the effects of electron-electron interaction are neglected but increases with the strength of the electron-electron interaction. The hysteresis appears in the region of conductance anomalies, i.e., less than 2e2/h, and is due to multis…
We investigate transport in a gate-defined graphene quantum point contact in the quantum Hall regime. Edge states confined to the interface of p and n regions in the graphene sheet are controllably brought together from opposite sides of the sample and allowed to mix in this split-gate geometry. Among the expected quantum Hall features, an unexpected additional plateau at 0.5 h/e^2 is observed. We propose that chaotic mixing of edge channels gives rise to the extra plateau.
We report the realization of nanotube-based quantum dot structures that use local electrostatic gating to produce individually controllable dots in series along a nanotube. Electrostatic top-gates produce depletion regions in the underlying tube; a pair of such depletion regions defines a quantum dot. Transparencies of tunnel barriers as well as the electrostatic energies, within single and multiple dots, can be tuned by gate voltages. The approach allows accurate control over multiple devices on a single tube, and serves as a design paradigm for nanotube-based electronics and quantum systems.
A first-principle model is proposed to study the electrostatic properties of a double-gated silicon slab of nano scale in the framework of density functional theory. The applied gate voltage is approximated as a variation of the electrostatic potential on the boundary of the supercell enclosing the system. With the electron density estimated by the real space Green's functions, efficient multigrid and fast Fourier Poisson solvers are employed to calculate the electrostatic potential from the charge density. In the representation of localized SIESTA linear combination of atomic orbitals, the Ko…
Electrostatically defined nanoscale devices on two-dimensional semiconductor heterostructures are the building blocks of various quantum electrical circuits. Owing to its atomically flat interfaces and the inherent two-dimensional nature, van der Waals heterostructures hold the advantage of large-scale uniformity, flexibility and portability over the conventional bulk semiconductor heterostructures. In this letter we show the operation of a split-gate defined point contact device on a MoS2/h-BN heterostructure, a first step towards realizing electrostatically gated quantum circuits on van der …
The realization of integrated quantum circuits requires precise on-chip control of charge carriers. Aiming at the coherent coupling of distant nanostructures at zero magnetic field, here we study the ballistic electron transport through two quantum point contacts (QPCs) in series in a three terminal configuration. We enhance the coupling between the QPCs by electrostatic focusing using a field effect lens. To study the emission and collection properties of QPCs in detail we combine the electrostatic focusing with magnetic deflection. Comparing our measurements with quantum mechanical and class…
In a model of a gate-patterned quantum device it is important to choose the correct electrostatic boundary conditions (BCs) in order to match experiment. In this study, we model gated-patterned devices in doped and undoped GaAs heterostructures for a variety of BCs. The best match is obtained for an unconstrained surface between the gates, with a dielectric region above it and a frozen layer of surface charge, together with a very deep back boundary. Experimentally, we find a 0.2V offset in pinch-off characteristics of one-dimensional channels in a doped heterostructure before and after etchin…
We report the observation of an anomalous conductance plateau near G = 0.5 G0 (G0 = 2e2/h) in asymmetrically biased AlGaAs/GaAs quantum point contacts (QPCs), with in-plane side gates in the presence of lateral spin-orbit coupling. This is a signature of spin polarization in the narrow portion of the QPC. The appearance and evolution of the conductance anomaly has been studied at T=4.2K as a function of the potential asymmetry between the side gates. The observation of spontaneous spin polarization in a side-gated GaAs QPC could eventually lead to the realization of an all-electric spin-valve …
We present gate-controlled single, double, and triple dot operation in electrostatically gapped bilayer graphene. Thanks to the recent advancements in sample fabrication, which include the encapsulation of bilayer graphene in hexagonal boron nitride and the use of graphite gates, it has become possible to electrostatically confine carriers in bilayer graphene and to completely pinch-off current through quantum dot devices. Here, we discuss the operation and characterization of electron-hole double dots. We show a remarkable degree of control of our device, which allows the implementation of tw…
We calculate the lifetime of low-energy electronic excitations in a two-dimensional quantum dot near a metallic gate. We find different behaviors depending on the relative values of the dot size, the dot-gate distance and the Thomas-Fermi screening length within the dot. The standard Fermi liquid behavior is obtained when the dot-gate distance is much shorter than the dot size or when it is so large that intrinsic effects dominate. Departures from the Fermi liquid behavior are found in the unscreened dipole case of small dots far away from the gate, for which a Caldeira-Leggett model is applic…
The nature of a metal--insulator transition tuned by external gates in quantum Hall (QH) systems with point constrictions at integer bulk filling, as reported in recent experiments of Roddaro et al. [1], is addressed. We are particularly concerned here with the insulating behavior--the phenomena of backscattering enhancement induced at high gate voltages. Electrostatics calculations for QH systems with split gates performed here show that observations are not a consequence of interedge interactions near the point contact. We attribute the phenomena of backscattering enhancement to a splitting …
