Unpredictable nature of fading channels and difficulty in tracking channel state information pose major challenge in wireless energy harvesting communication system design. In this work, we address relay selection problem for wireless powered communication networks, where the relays harvest energy from the source radio frequency signals. A single source-destination pair is considered without a direct link. The connecting relay nodes are equipped with storage batteries of infinite size. We assume that the channel state information (CSI) on the source-relay link is available at the relay nodes. Depending on the availability of the CSI on the relay-destination link at the relay node, we propose two relay selection schemes and evaluate their outage probability. Availability of the CSI at the relay node on the relay-destination link considerably improves the performance due to additional flexibility in the relay selection mechanism. Due to absence of CSI throughout the network at the time of transmission path selection, the analysis of the problem is not tractable. Therefore, we relax our assumptions on availability of CSI and closed-form expressions of the outage probability as a function of the amount of the available harvested energy are derived for both CSI availability cases. Finally, we numerically quantify the performance for the proposed schemes and compare the outage probability for fixed and equal number of wireless powered forwarding relays.
In this work, we address the relay selection problem for the wireless powered communication networks, where the relays harvest energy from the source radio frequency signals. A single source-destination pair is considered without a direct link. The connecting relay nodes are equipped with storage batteries of infinite size. We assume that the channel state information (CSI) on the source-relay link is available at the relay nodes. Depending on the availability of the CSI on the relay-destination link at the relay node, we propose different relay selection schemes and evaluate the outage probab…
In Cognitive Radio Networks (CRNs), unlicensed users are allowed to access the licensed spectrum when it is not currently being used by primary users (PUs). In this paper, we study the throughput maximization problem for a multi-channel CRN where each SU can only sense a limited number of channels. We show that this problem is strongly NP-hard, and propose an approximation algorithm with a factor at least $1/2μ$ where $μ\in [1,2]$ is a system parameter reflecting the sensing capability of SUs across channels and their sensing budgets. This performance guarantee is achieved by exploiting a nice…
Cognitive Radio Networks allow unlicensed users to opportunistically access the licensed spectrum without causing disruptive interference to the primary users (PUs). One of the main challenges in CRNs is the ability to detect PU transmissions. Recent works have suggested the use of secondary user (SU) cooperation over individual sensing to improve sensing accuracy. In this paper, we consider a CRN consisting of a single PU and multiple SUs to study the problem of maximizing the total expected system throughput. We propose a Bayesian decision rule based algorithm to solve the problem optimally …
We integrate a wireless powered communication network with a cooperative cognitive radio network, where multiple secondary users (SUs) powered wirelessly by a hybrid access point (HAP) help a primary user relay the data. As a reward for the cooperation, the secondary network gains the spectrum access where SUs transmit to HAP using time division multiple access. To maximize the sum-throughput of SUs, we present a secondary sum-throughput optimal resource allocation (STORA) scheme. Under the constraint of meeting target primary rate, the STORA scheme chooses the optimal set of relaying SUs and …
This paper deals with the problem of relay selection in wireless powered cooperative networks, where spatially random relays are equipped with energy storage devices e.g., batteries. In contrast to conventional techniques and in order to reduce complexity, the relay nodes can either harvest energy from the source signal (in case of uncharged battery) or attempt to decode and forward it (in case of charged battery). Several relay selection schemes that correspond to different state information requirements and implementation complexities are proposed. The charging/discharging behavior of the ba…
Devices can now be powered wirelessly by Access Points (APs). However, an AP cannot transmit frequently to charge devices as it may starve other nearby APs operating on the same channel. Consequently, there is a need to schedule the transmissions of APs to ensure their data queues remain short whilst charging energy-harvesting devices. We present a finite-horizon Markov Decision Process (MDP) to capture the queue states at APs and also channel conditions to nodes. We then use the MDP to investigate the following transmission policies: max weight, max queue, best channel state and random. Our r…
Relay nodes are used to improve the throughput, delay and reliability performance of energy harvesting networks by assisting both energy and information transfer between information nodes and access point. Previous studies on radio frequency energy harvesting networks are limited to single source single/multiple relay networks. In this paper, a novel joint relay selection, scheduling and power control problem for multiple source multiple relay network is formulated with the objective of minimizing the total duration of wireless power and information transfer. The formulated problem is non-conv…
Automotive services for connected vehicles are one of the main fields of application for new-generation mobile networks as well as for the edge computing paradigm. In this paper, we investigate a system architecture that integrates the distributed vehicular network with the network edge, with the aim to optimize the vehicle travel times. We then present a queue-based system model that permits the optimization of the vehicle flows, and we show its applicability to two relevant services, namely, lane change/merge (representative of cooperative assisted driving) and navigation. Furthermore, we in…
In this paper, we focus on a typical cooperative communication system with one pair of source and destination, where a unmanned aerial vehicle (UAV) flying from a start location to an end location serves as a mobile relay. To efficiently utilize energy in ambient environment, the UAV's transmission capability is powered exclusively by radio signal transmitted from the source via the power-splitting mechanism. In such a cooperative communication system, we study the end-to-end cooperative throughput maximization problem by optimizing the UAV's power profile, power-splitting ratio profile and tr…
Green energy powered cognitive radio (CR) network is capable of liberating the wireless access networks from spectral and energy constraints. The limitation of the spectrum is alleviated by exploiting cognitive networking in which wireless nodes sense and utilize the spare spectrum for data communications, while dependence on the traditional unsustainable energy is assuaged by adopting energy harvesting (EH) through which green energy can be harnessed to power wireless networks. Green energy powered CR increases the network availability and thus extends emerging network applications. Designing…
In this paper, we study the problem of cooperative communications in cognitive radio systems where the secondary user has limited relaying room for the overheard primary packets. More specifically, we characterize the stable throughput region of a cognitive radio network with a finite relaying buffer at the secondary user. Towards this objective, we formulate a constrained optimization problem for maximizing the secondary user throughput while guaranteeing the stability of the primary user queue. We consider a general cooperation policy where the packet admission and queue selection probabilit…
Emerged as a promising solution for future wireless communication systems, intelligent reflecting surface (IRS) is capable of reconfiguring the wireless propagation environment by adjusting the phase-shift of a large number of reflecting elements. To quantify the gain achieved by IRSs in the radio frequency (RF) powered Internet of Things (IoT) networks, in this work, we consider an IRS-assisted cellular-based RFpowered IoT network, where the cellular base stations (BSs) broadcast energy signal to IoT devices for energy harvesting (EH) in the charging stage, which is utilized to support the up…
We investigate a cooperative federated learning framework among devices for mobile edge computing, named CFLMEC, where devices co-exist in a shared spectrum with interference. Keeping in view the time-average network throughput of cooperative federated learning framework and spectrum scarcity, we focus on maximize the admission data to the edge server or the near devices, which fills the gap of communication resource allocation for devices with federated learning. In CFLMEC, devices can transmit local models to the corresponding devices or the edge server in a relay race manner, and we use a d…
In the future, sensor nodes or Internet of Things (IoTs) will be tasked with sampling the environment. These nodes/devices are likely to be powered by a Hybrid Access Point (HAP) wirelessly, and may be programmed by the HAP with a {\em sampling time} to collect sensory data, carry out computation, and transmit sensed data to the HAP. A key challenge, however, is random channel gains, which cause sensor nodes to receive varying amounts of Radio Frequency (RF) energy. To this end, we formulate a stochastic program to determine the charging time of the HAP and sampling time of sensor nodes. Our o…
Topology control algorithms allow each node in a wireless multi-hop network to adjust the power at which it makes its transmissions and choose the set of neighbors with which it communicates directly, while preserving global goals such as connectivity or coverage. This allows each node to conserve energy and contribute to increasing the lifetime of the network. In this paper, in contrast to most previous work, we consider (i) both the energy costs of communication as well as the amount of available energy at each node, (ii) the realistic situation of varying rates of energy consumption at diff…
We aim at maximizing the sum rate of secondary users (SUs) in OFDM-based Heterogeneous Cognitive Radio (CR) Networks using RF energy harvesting. Assuming SUs operate in a time switching fashion, each time slot is partitioned into three non-overlapping parts devoted for energy harvesting, spectrum sensing and data transmission. The general problem of joint resource allocation and structure optimization is formulated as a Mixed Integer Nonlinear Programming task which is NP-hard and intractable. Thus, we propose to tackle it by decomposing it into two subproblems. We first propose a sub-channel …
Power management is one of the vital issue in wireless sensor networks, where the lifetime of the network relies on battery powered nodes. Transmitting at high power reduces the lifetime of both the nodes and the network. One efficient way of power management is to control the power at which the nodes transmit. In this paper, a virtual multiple input multiple output wireless sensor network (VMIMO-WSN)communication architecture is considered and the power control of sensor nodes based on the approach of game theory is formulated. The use of game theory has proliferated, with a broad range of ap…
We consider the problem of cooperative spectrum sharing among a primary user (PU) and multiple secondary users (SUs) under quality of service (QoS) constraints. The SUs network is controlled by the PU through a relay which gets a revenue for amplifying and forwarding the SUs signals to their respective destinations. The relay charges each SU a different price depending on its received signal-to-interference and-noise ratio (SINR). The relay can control the SUs network and maximize any desired PU utility function. The PU utility function represents its rate, which is affected by the SUs access,…
In this paper, we consider a wireless cooperative network with an energy harvesting relay which is powered by the energy harvested from ambient RF waves, such as that of a data packet. At any given time, the relay operates either in the energy harvesting (EH) mode or the data decoding (DD) mode, but not both. Separate energy and data buffers are kept at the relay to store the harvested energy and decoded data packets, respectively. In this paper, we optimize a time switching policy that switches between the EH mode and DD mode to maximize the system throughput or minimize the average transmiss…
Wireless power transfer (WPT) is a promising technology to prolong the lifetime of sensor and communication devices, i.e., workers, in completing crowdsourcing tasks by providing continuous and cost-effective energy supplies. In this paper, we propose a wireless powered spatial crowdsourcing (SC) framework which consists of two mutual dependent phases: task allocation phase and data crowdsourcing phase. In the task allocation phase, we propose a Stackelberg game based mechanism for the SC platform to efficiently allocate spatial tasks and wireless charging power to each worker. In the data cro…
Maximizing network lifetime is a very challenging issue in routing protocol design for Mobile Ad-hoc NETworks (MANETs), since mobile nodes are powered by limited-capacity batteries. Furthermore, replacing or recharging batteries is often impossible in critical environments (e.g. battlefields, disaster areas, etc.) The proposed MEA-DSR (Multipath Energy-Aware on Demand Source Routing) protocol uses a load distribution policy in order to maximize network lifetime. The simulation results have shown the efficiency of the proposed protocol in comparison to DSR routing protocol in many difficult sce…
In this paper, we consider a full duplex wireless powered communication network where multiple users with RF energy harvesting capabilities communicate to a hybrid energy and information access point. An optimization framework is proposed with the objective of maximizing the sum throughput of the users subject to energy causality and maximum transmit power constraints considering a realistic energy harvesting model incorporating initial battery levels of the users. The joint optimization of power control, time allocation and scheduling is mathematically formulated as a mixed integer non linear…
We consider a relay-assisted wireless network, where the energy-harvesting buffer-aided relay node is powered by radio-frequency signals from a source node wishing to communicate with its destination. We propose two secure cooperative protocols for a network composed of a source node equipped with a data buffer communicating with its destination in the presence of a buffer-aided relay node and an eavesdropper. Our proposed protocols are designed based on the channel state information and the buffer state information at the source and relay nodes. The burstiness of data at the source node queue…
This paper studies a novel user cooperation method in a wireless powered communication network (WPCN), where a pair of distributed terminal users first harvest wireless energy broadcasted by one energy node (EN) and then use the harvested energy to transmit information cooperatively to a destination node (DN). In particular, the two cooperating users exchange their independent information with each other to form a virtual antenna array and transmit jointly to the DN. By allowing each user to allocate part of its harvested energy to transmit the other's information, the proposed cooperation can…
In this paper, we deal with the problem of maximizing the profit of Network Operators (NOs) of green cellular networks in situations where Quality-of-Service (QoS) guarantees must be ensured to users, and Base Stations (BSs) can be shared among different operators. We show that if NOs cooperate among them, by mutually sharing their users and BSs, then each one of them can improve its net profit. By using a game-theoretic framework, we study the problem of forming stable coalitions among NOs. Furthermore, we propose a mathematical optimization model to allocate users to a set of BSs, in order t…
Recently, Optical wireless communication (OWC) have been considered as a key element in the next generation of wireless communications due to its potential in supporting unprecedented communication speeds. In this paper, infrared lasers referred to as vertical-cavity surface-emitting lasers (VCSELs) are used as transmitters sending information to multiple users. In OWC, rate-maximization optimization problems are usually complex due to the high number of optical access points (APs) needed to ensure coverage. Therefore, practical solutions with low computational time are essential to cope with …
Internet-of-Things (IoT) is featured with low-power communications among a massive number of ubiquitously-deployed and energy-constrained electronics, e.g., sensors and actuators. To cope with the demand, wireless-powered cooperative relaying emerges as a promising communication paradigm to extend data transmission coverage and solve energy scarcity for the IoT devices. In this paper, we propose a novel hybrid relaying strategy by combining wireless-powered communication and ambient backscattering functions to improve applicability and performance of data transfer. In particular, the hybrid re…
