Large scale multiple-input multiple-output (MIMO) or Massive MIMO is one of the pivotal technologies for future wireless networks. However, the performance of massive MIMO systems heavily relies on accurate channel estimation. While the acquisition of channel state information (CSI) in such systems requires an increasingly large amount of training overhead as the number of users grows. To tackle this issue, in this paper, we propose a deep learning assisted blind channel estimation technique for orthogonal frequency division multiplexing (OFDM) based massive MIMO systems. We prove that by exploiting the asymptotic orthogonality of the massive MIMO channels, the channel distortion can be averaged out without the prior knowledge of channel impulse responses, and after some mathematical manipulation, different users transmitted data symbols can be extracted. Thus, by deploying a denoising convolutional neural network algorithm (DnCNN), we mitigate a remaining channel and noise effect to accurately detect the transmitted data symbols at the channel sounding stage. Using the detected data symbols as virtual pilots, we estimate the CSI of all the users at each BS antennas. Our simulation results testify the efficacy of our proposed technique and demonstrate that it can provide a mean square error (MSE) performance which coincides with that of the data-aided channel estimation technique.
Blind enumeration of the number of transmit antennas and blind identification of multiple-input multiple-output (MIMO) schemes are two pivotal steps in MIMO signal identification for both military and commercial applications. Conventional approaches treat them as two independent problems, namely the source number enumeration and the presence detection of space-time redundancy, respectively. In this paper, we develop a joint blind identification algorithm to determine the number of transmit antennas and MIMO scheme simultaneously. By restructuring the received signals, we derive three subspace-…
In this paper, we investigate the blind channel estimation problem for MIMO systems under Rayleigh fading channel. Conventional MIMO communication techniques require transmitting a considerable amount of training symbols as pilots in each data block to obtain the channel state information (CSI) such that the transmitted signals can be successfully recovered. However, the pilot overhead and contamination become a bottleneck for the practical application of MIMO systems with the increase of the number of antennas. To overcome this obstacle, we propose a blind channel estimation framework, where …
In this paper, a low complexity time domain semi-blind algorithm is proposed to estimate and track the time varying MIMO OFDM channels. First, the proposed least mean squares (LMS) based algorithm is developed for the training mode and then is extended for the blind mode of the operation by combining with the decision direction (DD) or adaptive Bussgang algorithm (ABA) techniques. In the blind mode, because of decision errors, a smaller step size is considered for the LMS algorithm and the channel estimation is run a few times to improve its precision. In each round of the estimation in the bl…
We present an algorithm that efficiently performs blind decoding of MIMO signals. That is, given no channel state information (CSI) at either the transmitter or receiver, our algorithm takes a block of samples and returns an estimate of the underlying data symbols. In prior work, the problem of blind decoding was formulated as a non-convex optimization problem. In this work, we present an algorithm that efficiently solves this non-convex problem in practical settings. This algorithm leverages concepts of linear and mixed-integer linear programming. Empirically, we show that our technique has a…
This letter focuses on integrating rate-splitting multiple-access (RSMA) with time-division-duplex Cell-free Massive MIMO (multiple-input multiple-output) for massive machine-type communications. Due to the large number of devices, their sporadic access behaviour and limited coherence interval, we assume a random access strategy with all active devices utilizing the same pilot for uplink channel estimation. This gives rise to a highly pilot-contaminated scenario, which inevitably deteriorates channel estimates. Motivated by the robustness of RSMA towards imperfect channel state information, we…
The practical implementation of maximum likelihood detection is limited by its high complexity as well as requiring perfect channel state information. Although conventional blind detection techniques reduce complexity, they degrade performance and require blind channel state information. In this paper (for the first time), a deep learning based blind detection and a joint blind detection-constellation shaping structure are presented (to solve this problem). This paper (deeply) goes through the problem and discusses several (practical) scenarios, including single user, multiuser with resource (…
The slice-wise multiplication of two tensors is required in a variety of tensor decompositions (including PARAFAC2 and PARATUCK2) and is encountered in many applications, including the analysis of multidimensional biomedical data (EEG, MEG, etc.) or multi-carrier MIMO systems. In this paper, we propose a new tensor representation that is not based on a slice-wise (matrix) description, but can be represented by a double contraction of two tensors. Such a double contraction of two tensors can be efficiently calculated via generalized unfoldings. It leads to new tensor models of the investigated …
We provide the optimal receive combining strategy for federated learning in multiple-input multiple-output (MIMO) systems. Our proposed algorithm allows the clients to perform individual gradient sparsification which greatly improves performance in scenarios with heterogeneous (non i.i.d.) training data. The proposed method beats the benchmark by a wide margin.
Intelligent reflective surface (IRS) is an emergent technology for future wireless communications. It consists of a large 2D array of passive scattering elements that control the electromagnetic properties of radio-frequency waves so that the reflected signals add coherently at the intended receiver or destructively to reduce co-channel interference. The promised gains of IRS-assisted communications depend on the accuracy of the channel state information. In this paper, we propose two novel channel estimation methods for an IRS-assisted multiple-input multiple-output (MIMO) communication syste…
Reconfigurable Intelligent Surfaces (RIS) are passive or semi-passive heterogeneous metasurfaces and consist of many tunable elements. RIS is gaining momentum as a promising new technology to enable transforming the propagation environment into controllable parameters. In this paper, we investigate the co-design of per-subcarrier power allocation matrices and multielement RIS phase shifts in downlink wideband MIMO transmission using 28 GHz frequency bands. Our contributions in improving RIS-aided links include (1) enhanced system modeling with pathloss and blockage modeling, and uniform rectan…
This paper considers a lens antenna array-assisted millimeter wave (mmWave) multiuser multiple-input multiple-output (MU-MIMO) system. The base station's beam selection matrix and user terminals' phase-only beamformers are jointly designed with the aim of maximizing the uplink sum rate. In order to deal with the formulated mixed-integer optimization problem, a penalty dual decomposition (PDD)-based iterative algorithm is developed via capitalizing on the weighted minimum mean square error (WMMSE), block coordinate descent (BCD), and minorization-maximization (MM) techniques. Moreover, a low-co…
In this paper, we investigate the secure beamforming design in an intelligent reflection surface (IRS) assisted millimeter wave (mmWave) system, where the hybrid beamforming (HB) and the passive beamforming (PB) are employed by the transmitter and the IRS, respectively. To maximize the secrecy capacity, the joint optimization of HB and PB is formulated as a nonconvex problem with constant-modulus constraints. To efficiently solve such a challenging problem, the original problem is decomposed into a PB subproblem and an HB subproblem, then these two subproblems are sequentially solved by propos…
Channel estimation is challenging for the reconfigurable intelligence surface (RIS) assisted millimeter wave (mmWave) communications. Since the number of coefficients of the cascaded channels in such systems is closely dependent on the product of the number of base station antennas and the number of RIS elements, the pilot overhead would be prohibitively high. In this letter, we propose a cascaded channel estimation framework for an RIS assisted mmWave multiple-input multiple-output system, where the wideband effect on transmission model is considered. Then, we transform the wideband channel e…
In this paper, the appealing features of a dual-polarized intelligent reflecting surface (IRS) are exploited to improve the performance of dual-polarized massive multiple-input multiple-output (MIMO) with non-orthogonal multiple access (NOMA) under imperfect successive interference cancellation (SIC). By considering the downlink of a multi-cluster scenario, the IRSs assist the base station (BS) to multiplex subsets of users in the polarization domain. Our novel strategy alleviates the impact of imperfect SIC and enables users to exploit polarization diversity with near-zero inter-subset interf…
Security and energy efficiency have become crucial features in the modern-era wireless communication. In this paper, we consider an energy-efficient design for intelligent reflecting surface (IRS)-assisted multiple-input multiple-output multiple-eavesdropper (MIMOME) wiretap channels (WTC). Our objective is to jointly optimize the transmit covariance matrix and the IRS phase-shifts to maximize the secrecy energy efficiency (SEE) of the considered system subject to a secrecy rate constraint at the legitimate receiver. To tackle this challenging non-convex problem in which the design variables a…
A digitally-assisted photonic analog domain self-interference cancellation (SIC) and frequency downconversion method is proposed for in-band full-duplex multiple-input multiple-output (MIMO) systems using the least square (LS) algorithm with adaptive order. The SIC and frequency downconversion are achieved in the optical domain via a dual-parallel Mach-Zehnder modulator (DP-MZM), while the downconverted signal is processed by the LS algorithm with adaptive order that is used to track the response of the multipath self-interference (SI) channel and reconstruct the reference signal for SIC. The …
Intelligent reflecting surface (IRS) is an emerging technology for future wireless communications including 5G and especially 6G. It consists of a large 2D array of (semi-)passive scattering elements that control the electromagnetic properties of radio-frequency waves so that the reflected signals add coherently at the intended receiver or destructively to reduce co-channel interference. The promised gains of IRS-assisted communications depend on the accuracy of the channel state information. In this paper, we address the receiver design for an IRS-assisted multiple-input multiple-output (MIMO…
We proposed and demonstrated a hybrid blind source separation system which can switch between multiple-input and multi-output mode and free space optical communication mode depends on different situation to get best condition for separation.
This paper focuses on the fundamental problem of maximizing the achievable weighted sum rate (WSR) at information receivers (IRs) in an intelligent reflecting surface (IRS) assisted simultaneous wireless information and power transfer system under a multiple-input multiple-output (SWIPT-MIMO) setting, subject to a quality-of-service (QoS) constraint at the energy receivers (ERs). Notably, due to the coupling between the transmit precoding matrix and the passive beamforming vector in the QoS constraint, the formulated non-convex optimization problem is challenging to solve. We first decouple th…
Shanghai Advanced Research Institute, Chinese Academy of Sciences（中国科学院上海高等研究院）；University of Chinese Academy of Sciences（中国科学院大学）；Nanjing University of Posts and Telecommunications（南京邮电大学）；Shenzhen CyberAray Network Technology Co., Ltd.（深圳赛博阵列网络科技有限公司）；The University of Electro-Communications（电子通信大学）；University College London（伦敦大学学院）；Kyung Hee University（庆熙大学）；Mohamed Bin Zayed University of Artificial Intelligence（穆罕默德·本·扎耶德人工智能大学）
Directional beamforming is a crucial component for realizing robust wireless communication systems using millimeter wave (mmWave) technology. Beam alignment using brute-force search of the space introduces time overhead while location aided blind beam alignment adds additional hardware requirements to the system. In this paper, we introduce a method for blind beam alignment based on the RF fingerprints of user equipment obtained by the base stations. The proposed system performs blind beam alignment on a multiple base station cellular environment with multiple mobile users using deep reinforce…
This paper investigates the use of a reconfigurable intelligent surface (RIS) to aid point-to-point multi-data-stream multiple-input multiple-output (MIMO) wireless communications. With practical finite alphabet input, the reflecting elements at the RIS and the precoder at the transmitter are alternatively optimized to minimize the symbol error rate (MSER). In the reflecting optimization with a fixed precoder, two reflecting design methods are developed, referred as eMSER-Reflecting and vMSER-Reflecting. In the optimization of the precoding matrix with a fixed reflecting pattern, the matrix op…
