Calibration of devices with different modalities is a key problem in robotic vision. Regular spatial objects, such as planes, are frequently used for this task. This paper deals with the automatic detection of ellipses in camera images, as well as to estimate the 3D position of the spheres corresponding to the detected 2D ellipses. We propose two novel methods to (i) detect an ellipse in camera images and (ii) estimate the spatial location of the corresponding sphere if its size is known. The algorithms are tested both quantitatively and qualitatively. They are applied for calibrating the sensor system of autonomous cars equipped with digital cameras, depth sensors and LiDAR devices.
Maria Curie-Sklodowska University（玛丽亚·居里-斯克沃多夫斯卡大学）；Warsaw University of Technology（华沙理工大学）
In this paper a method for camera pose estimation from a sequence of images is presented. The method assumes camera is calibrated (intrinsic parameters are known) which allows to decrease a number of required pairs of corresponding points compared to uncalibrated case. Our algorithm can be used as a first stage in a structure from motion stereo reconstruction system.
Fast binary descriptors build the core for many vision based applications with real-time demands like object detection, Visual Odometry or SLAM. Commonly it is assumed, that the acquired images and thus the patches extracted around keypoints originate from a perspective projection ignoring image distortion or completely different types of projections such as omnidirectional or fisheye. Usually the deviations from a perfect perspective projection are corrected by undistortion. Latter, however, introduces severe artifacts if the cameras field-of-view gets larger. In this paper, we propose a dist…
University of Oulu（奥卢大学）；Czech Technical University in Prague（捷克布拉格技术大学）；ETH Zürich（苏黎世联邦理工学院）；Charles University（查理大学）
In this paper, we propose the first minimal solutions for estimating the semi-generalized homography given a perspective and a generalized camera. The proposed solvers use five 2D-2D image point correspondences induced by a scene plane. One of them assumes the perspective camera to be fully calibrated, while the other solver estimates the unknown focal length together with the absolute pose parameters. This setup is particularly important in structure-from-motion and image-based localization pipelines, where a new camera is localized in each step with respect to a set of known cameras and 2D-3…
University of Oulu（奥卢大学）；Czech Technical University in Prague（布拉格捷克理工大学）；ETH Zürich（苏黎世联邦理工学院）
In this paper we study the problem of estimating the semi-generalized pose of a partially calibrated camera, i.e., the pose of a perspective camera with unknown focal length w.r.t. a generalized camera, from a hybrid set of 2D-2D and 2D-3D point correspondences. We study all possible camera configurations within the generalized camera system. To derive practical solvers to previously unsolved challenging configurations, we test different parameterizations as well as different solving strategies based on the state-of-the-art methods for generating efficient polynomial solvers. We evaluate the t…
UC-NeRF: Neural Radiance Field for Under-Calibrated Multi-view Cameras in Autonomous Driving
University of Science and Technology of China（中国科学技术大学）；PKU-Wuhan Institute for Artificial Intelligence（北大武汉人工智能研究院）；DJI Technology（大疆科技）；ShanghaiTech University（上海科技大学）
This work contributes an efficient algorithm to compute the Relative Pose problem (RPp) between calibrated cameras and certify the optimality of the solution, given a set of pair-wise feature correspondences affected by noise and probably corrupted by wrong matches. We propose a family of certifiers that is shown to increase the ratio of detected optimal solutions. This set of certifiers is incorporated into a fast essential matrix estimation pipeline that, given any initial guess for the RPp, refines it iteratively on the product space of 3D rotations and 2-sphere. In addition, this fast cert…
Calibration in a multi camera network has widely been studied for over several years starting from the earlier days of photogrammetry. Many authors have presented several calibration algorithms with their relative advantages and disadvantages. In a stereovision system, multiple view reconstruction is a challenging task. However, the total computational procedure in detail has not been presented before. Here in this work, we are dealing with the problem that, when a world coordinate point is fixed in space, image coordinates of that 3D point vary for different camera positions and orientations.…
We present a dataset for evaluating the tracking accuracy of monocular visual odometry and SLAM methods. It contains 50 real-world sequences comprising more than 100 minutes of video, recorded across dozens of different environments -- ranging from narrow indoor corridors to wide outdoor scenes. All sequences contain mostly exploring camera motion, starting and ending at the same position. This allows to evaluate tracking accuracy via the accumulated drift from start to end, without requiring ground truth for the full sequence. In contrast to existing datasets, all sequences are photometricall…
South Ural State University（南乌拉尔国立大学）；TrunkTech Co., Ltd.（创科有限公司）
We propose two minimal solutions to the problem of relative pose estimation of (i) a calibrated camera from four points in two views and (ii) a calibrated generalized camera from five points in two views. In both cases, the relative rotation angle between the views is assumed to be known. In practice, such angle can be derived from the readings of a 3d gyroscope. We represent the rotation part of the motion in terms of unit quaternions in order to construct polynomial equations encoding the epipolar constraints. The Gröbner basis technique is then used to efficiently derive the solutions. Our …
Eotvos Lorand University（厄特沃什·罗兰大学）；Czech Technical University in Prague（布拉格捷克理工大学）；MTA SZTAKI（匈牙利科学院计算机科学与控制研究所）
Two solvers are proposed for estimating the extrinsic camera parameters from a single affine correspondence assuming general planar motion. In this case, the camera movement is constrained to a plane and the image plane is orthogonal to the ground. The algorithms do not assume other constraints, e.g.\ the non-holonomic one, to hold. A new minimal solver is proposed for the semi-calibrated case, i.e. the camera parameters are known except a common focal length. Another method is proposed for the fully calibrated case. Due to requiring a single correspondence, robust estimation, e.g. histogram v…
Practical solutions to the relative pose of three calibrated cameras
Visual Recognition Group, Faculty of Electrical Engineering, Czech Technical University in Prague（视觉识别组，电气工程系，布拉格捷克技术大学）；Faculty of Mathematics, Physics and Informatics, Comenius University in Bratislava（数学、物理和信息学系，布拉迪斯拉发康门尼乌斯大学）；ETH Zürich (Zurich), HUN-REN SZTAKI (Budapest)（苏黎世ETH，匈牙利-中国SZTAKI（布达佩斯））；Czech Institute of Informatics, Robotics and Cybernetics, Czech Technical University in Prague（捷克信息学、机器人学与自动控制研究所，布拉格捷克技术大学）
The light field camera is useful for computer graphics and vision applications. Calibration is an essential step for these applications. After calibration, we can rectify the captured image by using the calibrated camera parameters. However, the large camera array calibration method, which assumes that all cameras are on the same plane, ignores the orientation and intrinsic parameters. The multi-camera calibration technique usually assumes that the working volume and viewpoints are fixed. In this paper, we describe a calibration algorithm suitable for a mobile camera array based light field ac…
National University of Singapore（新加坡国立大学）；South Ural State University（南乌拉尔国立大学）
The $\mathrm{SE}(3)$ invariants of a pose include its rotation angle and screw translation. In this paper, we present a complete comprehensive study of the relative pose estimation problem for a calibrated camera constrained by known $\mathrm{SE}(3)$ invariant, which involves 5 minimal problems in total. These problems reduces the minimal number of point pairs for relative pose estimation and improves the estimation efficiency and robustness. The $\mathrm{SE}(3)$ invariant constraints can come from extra sensor measurements or motion assumption. Different from conventional relative pose estima…
Deep learning is the essential building block of state-of-the-art person detectors in 2D range data. However, only a few annotated datasets are available for training and testing these deep networks, potentially limiting their performance when deployed in new environments or with different LiDAR models. We propose a method, which uses bounding boxes from an image-based detector (e.g. Faster R-CNN) on a calibrated camera to automatically generate training labels (called pseudo-labels) for 2D LiDAR-based person detectors. Through experiments on the JackRabbot dataset with two detector models, DR…
The segmentation and classification of animals from camera-trap images is due to the conditions under which the images are taken, a difficult task. This work presents a method for classifying and segmenting mammal genera from camera-trap images. Our method uses Multi-Layer Robust Principal Component Analysis (RPCA) for segmenting, Convolutional Neural Networks (CNNs) for extracting features, Least Absolute Shrinkage and Selection Operator (LASSO) for selecting features, and Artificial Neural Networks (ANNs) or Support Vector Machines (SVM) for classifying mammal genera present in the Colombian…
Shenzhen University（深圳大学）；Guangdong Laboratory of Artificial Intelligence and Digital Economy（广东省人工智能与数字经济实验室）
Multi-target multi-camera tracking (MTMCT) plays an important role in intelligent video analysis, surveillance video retrieval, and other application scenarios. Nowadays, the deep-learning-based MTMCT has been the mainstream and has achieved fascinating improvements regarding tracking accuracy and efficiency. However, according to our investigation, the lacking of datasets focusing on real-world application scenarios limits the further improvements for current learning-based MTMCT models. Specifically, the learning-based MTMCT models training by common datasets usually cannot achieve satisfact…
Most digital camera pipelines use color constancy methods to reduce the influence of illumination and camera sensor on the colors of scene objects. The highest accuracy of color correction is obtained with learning-based color constancy methods, but they require a significant amount of calibrated training images with known ground-truth illumination. Such calibration is time consuming, preferably done for each sensor individually, and therefore a major bottleneck in acquiring high color constancy accuracy. Statistics-based methods do not require calibrated training images, but they are less acc…
Depth Over RGB: Automatic Evaluation of Open Surgery Skills Using Depth Camera
Technion – Israel Institute of Technology（以色列理工学院）；University of Wisconsin-Madison School of Medicine and Public Health（威斯康星大学麦迪逊分校医学与公共卫生学院）；University of Wisconsin Hospitals and Clinics（威斯康星大学医院与诊所）
Universidad de Antioquia UdeA（安蒂奥基亚大学（UdeA））；Instituto Tecnológico Metropolitano ITM（大都会理工学院（ITM））
Non intrusive monitoring of animals in the wild is possible using camera trapping framework, which uses cameras triggered by sensors to take a burst of images of animals in their habitat. However camera trapping framework produces a high volume of data (in the order on thousands or millions of images), which must be analyzed by a human expert. In this work, a method for animal species identification in the wild using very deep convolutional neural networks is presented. Multiple versions of the Snapshot Serengeti dataset were used in order to probe the ability of the method to cope with differ…
We propose a deep neural network architecture to infer dense depth from an image and a sparse point cloud. It is trained using a video stream and corresponding synchronized sparse point cloud, as obtained from a LIDAR or other range sensor, along with the intrinsic calibration parameters of the camera. At inference time, the calibration of the camera, which can be different than the one used for training, is fed as an input to the network along with the sparse point cloud and a single image. A Calibrated Backprojection Layer backprojects each pixel in the image to three-dimensional space using…
In this paper, we focus on fully automatic traffic surveillance camera calibration, which we use for speed measurement of passing vehicles. We improve over a recent state-of-the-art camera calibration method for traffic surveillance based on two detected vanishing points. More importantly, we propose a novel automatic scene scale inference method. The method is based on matching bounding boxes of rendered 3D models of vehicles with detected bounding boxes in the image. The proposed method can be used from arbitrary viewpoints, since it has no constraints on camera placement. We evaluate our me…
University of Girona（赫罗纳大学）；Coronis Computing, S.L.（科罗尼斯计算有限公司）；IFREMER（法国海洋开发研究院）；Université de Paris（巴黎大学）；Institut de Physique du Globe de Paris（巴黎地球物理研究所）；CNRS（法国国家科学研究中心）
Recent advances in structure-from-motion techniques are enabling many scientific fields to benefit from the routine creation of detailed 3D models. However, for a large number of applications, only a single camera is available, due to cost or space constraints in the survey platforms. Monocular structure-from-motion raises the issue of properly estimating the scale of the 3D models, in order to later use those models for metrology. The scale can be determined from the presence of visible objects of known dimensions, or from information on the magnitude of the camera motion provided by other se…
Brno University of Technology（布尔诺理工大学）；Faculty of Information Technology（信息技术学院）；Centre of Excellence IT4Innovations（IT4Innovations卓越中心）
In this paper, we focus on traffic camera calibration and a visual speed measurement from a single monocular camera, which is an important task of visual traffic surveillance. Existing methods addressing this problem are difficult to compare due to a lack of a common data set with reliable ground truth. Therefore, it is not clear how the methods compare in various aspects and what factors are affecting their performance. We captured a new data set of 18 full-HD videos, each around 1 hr long, captured at six different locations. Vehicles in the videos (20865 instances in total) are annotated wi…
Beihang University（北京航空航天大学）；Beijing Advanced Innovation Center for Big Data and Brain Computing（大数据与脑计算北京先进创新中心）；Hangzhou Innovation Institution, Beihang University（北京航空航天大学杭州创新研究院）
Recently, the rapid development of Solid-State LiDAR (SSL) enables low-cost and efficient obtainment of 3D point clouds from the environment, which has inspired a large quantity of studies and applications. However, the non-uniformity of its scanning pattern, and the inconsistency of the ranging error distribution bring challenges to its calibration task. In this paper, we proposed a fully automatic calibration method for the non-repetitive scanning SSL and camera systems. First, a temporal-spatial-based geometric feature refinement method is presented, to extract effective features from SSL p…
German Research Center for Artificial Intelligence (DFKI GmbH)（德国人工智能研究中心）；Technische Universität Kaiserslautern（凯泽斯劳滕工业大学）；Osaka Prefecture University（大阪府立大学）
The contribution of this paper is fourfold. The first contribution is a novel, generic method for automatic ground truth generation of camera-captured document images (books, magazines, articles, invoices, etc.). It enables us to build large-scale (i.e., millions of images) labeled camera-captured/scanned documents datasets, without any human intervention. The method is generic, language independent and can be used for generation of labeled documents datasets (both scanned and cameracaptured) in any cursive and non-cursive language, e.g., English, Russian, Arabic, Urdu, etc. To assess the effe…
Kingston University（金斯顿大学）；University of Sheffield（谢菲尔德大学）；University of Western Macedonia（西马其顿大学）
Smart video sensors for applications related to surveillance and security are IOT-based as they use Internet for various purposes. Such applications include crowd behaviour monitoring and advanced decision support systems operating and transmitting information over internet. The analysis of crowd and pedestrian behaviour is an important task for smart IoT cameras and in particular video processing. In order to provide related behavioural models, simulation and tracking approaches have been considered in the literature. In both cases ground truth is essential to train deep models and provide a …
A light stage uses a series of calibrated cameras and lights to capture a subject's facial appearance under varying illumination and viewpoint. This captured information is crucial for facial reconstruction and relighting. Unfortunately, light stages are often inaccessible: they are expensive and require significant technical expertise for construction and operation. In this paper, we present SunStage: a lightweight alternative to a light stage that captures comparable data using only a smartphone camera and the sun. Our method only requires the user to capture a selfie video outdoors, rotatin…
University of Illinois, Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）；Institute for Infocomm Research（信息通信研究院）；National University of Singapore（新加坡国立大学）
Depth sensing devices have created various new applications in scientific and commercial research with the advent of Microsoft Kinect and PMD (Photon Mixing Device) cameras. Most of these applications require the depth cameras to be pre-calibrated. However, traditional calibration methods using a checkerboard do not work very well for depth cameras due to the low image resolution. In this paper, we propose a depth calibration scheme which excels in estimating camera calibration parameters when only a handful of corners and calibration images are available. We exploit the noise properties of PM…
Texas Tech University（德克萨斯理工大学）；Texas Parks and Wildlife Department（德克萨斯州公园与野生动物管理局）
This paper introduces an automated vision system for animal detection in trail-camera images taken from a field under the administration of the Texas Parks and Wildlife Department. As traditional wildlife counting techniques are intrusive and labor intensive to conduct, trail-camera imaging is a comparatively non-intrusive method for capturing wildlife activity. However, given the large volume of images produced from trail-cameras, manual analysis of the images remains time-consuming and inefficient. We implemented a two-stage deep convolutional neural network pipeline to find animal-containin…
We propose a framework that extends Blender to exploit Structure from Motion (SfM) and Multi-View Stereo (MVS) techniques for image-based modeling tasks such as sculpting or camera and motion tracking. Applying SfM allows us to determine camera motions without manually defining feature tracks or calibrating the cameras used to capture the image data. With MVS we are able to automatically compute dense scene models, which is not feasible with the built-in tools of Blender. Currently, our framework supports several state-of-the-art SfM and MVS pipelines. The modular system design enables us to i…
Automatic Calibration of a Multi-Camera System with Limited Overlapping Fields of View for 3D Surgical Scene Reconstruction
Research in Orthopedic Computer Science（骨科计算机科学研究）；University Hospital Balgrist（巴尔格斯特大学医院）；University of Zurich（苏黎世大学）；Computer Vision and Geometry（计算机视觉与几何）；ETH Zurich（苏黎世联邦理工学院）
Eotvos Lorand University（罗兰大学）；Czech Technical University in Prague（布拉格捷克理工大学）；MTA SZTAKI（匈牙利科学院计算机与自动化研究所）
We propose two novel solvers for estimating the egomotion of a calibrated camera mounted to a moving vehicle from a single affine correspondence via recovering special homographies. For the first class of solvers, the sought plane is expected to be perpendicular to one of the camera axes. For the second class, the plane is orthogonal to the ground with unknown normal, e.g., it is a building facade. Both methods are solved via a linear system with a small coefficient matrix, thus, being extremely efficient. Both the minimal and over-determined cases can be solved by the proposed methods. They a…
The Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；Hong Kong University of Science and Technology（香港科技大学）；HKUST Shenzhen-Hong Kong Collaborative Innovation Research Institute（香港科技大学深港协同创新研究院）；CWB Institute of Autonomous Driving（CWB自动驾驶研究院）
The combination of LiDARs and cameras enables a mobile robot to perceive environments with multi-modal data, becoming a key factor in achieving robust perception. Traditional frame cameras are sensitive to changing illumination conditions, motivating us to introduce novel event cameras to make LiDAR-camera fusion more complete and robust. However, to jointly exploit these sensors, the challenging extrinsic calibration problem should be addressed. This paper proposes an automatic checkerboard-based approach to calibrate extrinsics between a LiDAR and a frame/event camera, where four contributio…
In this paper, it is proposed to solve the problem of triangulation for calibrated omnidirectional cameras through the optimisation of ray-pairs on the projective sphere. The proposed solution boils down to finding the roots of a quadratic function, and as such is closed form, completely non-iterative and computationally inexpensive when compared to previous methods. In addition, even thought the motivation is clearly to solve the triangulation problem for omnidirectional cameras, it is demonstrated that the proposed methods can be applied to non-omnidirectional, narrow field-of-view cameras.
California Institute of Technology（加州理工学院）；Google（谷歌公司）
Camera traps enable the automatic collection of large quantities of image data. Biologists all over the world use camera traps to monitor animal populations. We have recently been making strides towards automatic species classification in camera trap images. However, as we try to expand the geographic scope of these models we are faced with an interesting question: how do we train models that perform well on new (unseen during training) camera trap locations? Can we leverage data from other modalities, such as citizen science data and remote sensing data? In order to tackle this problem, we ha…
Radar Guided Camera Verification for Automatic Emergency Braking Rethinking Object Detection in Radar Camera Fusion
Autonomous Systems Lab, Department of Mechatronics Engineering, SRM Institute of Science and Technology（SRM科学与技术学院机电工程系自主系统实验室）；Centre for Electric Mobility, Department of EEE, SRM Institute of Science and Technology（SRM科学与技术学院电气与电子工程系电动出行中心）
We introduce the novel task of Pano2Vid $-$ automatic cinematography in panoramic 360$^{\circ}$ videos. Given a 360$^{\circ}$ video, the goal is to direct an imaginary camera to virtually capture natural-looking normal field-of-view (NFOV) video. By selecting "where to look" within the panorama at each time step, Pano2Vid aims to free both the videographer and the end viewer from the task of determining what to watch. Towards this goal, we first compile a dataset of 360$^{\circ}$ videos downloaded from the web, together with human-edited NFOV camera trajectories to facilitate evaluation. Next,…
LISPEN（LISPEN实验室）；Arts et Métiers ParisTech（巴黎高等工艺学院）
Unlike classification, position labels cannot be assigned manually by humans. For this reason, generating supervision for precise object localization is a hard task. This paper details a method to create large datasets for 3D object localization, with real world images, using an industrial robot to generate position labels. By knowledge of the geometry of the robot, we are able to automatically synchronize the images of the two cameras and the object 3D position. We applied it to generate a screw-driver localization dataset with stereo images, using a KUKA LBR iiwa robot. This dataset could th…
Australian Centre for Field Robotics（澳大利亚野外机器人学中心）；University of Sydney（悉尼大学）
This paper proposes an automated method to obtain the extrinsic calibration parameters between a camera and a 3D lidar with as low as 16 beams. We use a checkerboard as a reference to obtain features of interest in both sensor frames. The calibration board centre point and normal vector are automatically extracted from the lidar point cloud by exploiting the geometry of the board. The corresponding features in the camera image are obtained from the camera's extrinsic matrix. We explain the reasons behind selecting these features, and why they are more robust compared to other possibilities. To…
We describe our method for automatic generation of a visually interesting camera path (automatic cinematography)from a 360 video. Based on the information from the scene objects, multiple shot hypotheses for different shot types are constructed and the best one is rendered.
fortiss GmbH（福蒂斯有限公司）；Technical University of Munich（慕尼黑工业大学）
Most intelligent transportation systems use a combination of radar sensors and cameras for robust vehicle perception. The calibration of these heterogeneous sensor types in an automatic fashion during system operation is challenging due to differing physical measurement principles and the high sparsity of traffic radars. We propose - to the best of our knowledge - the first data-driven method for automatic rotational radar-camera calibration without dedicated calibration targets. Our approach is based on a coarse and a fine convolutional neural network. We employ a boosting-inspired training a…
A near-optimal reconstruction of the radiance of a High Dynamic Range scene from an exposure stack can be obtained by modeling the camera noise distribution. The latent radiance is then estimated using Maximum Likelihood Estimation. But this requires a well-calibrated noise model of the camera, which is difficult to obtain in practice. We show that an unbiased estimation of comparable variance can be obtained with a simpler Poisson noise estimator, which does not require the knowledge of camera-specific noise parameters. We demonstrate this empirically for four different cameras, ranging from …
University of Alberta（阿尔伯塔大学）；Department of Computing Science（计算机科学系）
We introduce new linear mathematical formulations to calculate the focal length of a camera in an active platform. Through mathematical derivations, we show that the focal lengths in each direction can be estimated using only one point correspondence that relates images taken before and after a degenerate rotation of the camera. The new formulations will be beneficial in robotic and dynamic surveillance environments when the camera needs to be calibrated while it freely moves and zooms. By establishing a correspondence between only two images taken after slightly panning and tilting the camera…
We present a lightweight solution to recover 3D pose from multi-view images captured with spatially calibrated cameras. Building upon recent advances in interpretable representation learning, we exploit 3D geometry to fuse input images into a unified latent representation of pose, which is disentangled from camera view-points. This allows us to reason effectively about 3D pose across different views without using compute-intensive volumetric grids. Our architecture then conditions the learned representation on camera projection operators to produce accurate per-view 2d detections, that can be …
