Nanofluidic systems show great promises for applications in energy conversion, where their performance can be enhanced by nanoscale liquid-solid slip. However, efficiency is also controlled by surface charge, which is known to reduce slip. Combining molecular dynamics simulations and analytical developments, we show the dramatic impact of surface charge distribution on the slip-charge coupling. Homogeneously charged graphene exhibits a very favorable slip-charge relation (rationalized with a new theoretical model correcting some weaknesses of the existing ones), leading to giant electrokinetic energy conversion. In contrast, slip is strongly affected on heterogeneously charged surfaces, due to the viscous drag induced by counter-ions trapped on the surface. In that case slip should depend on the detailed physical chemistry of the interface controlling the fraction of bound ions. Our numerical results and theoretical models provide new fundamental insight on the molecular mechanisms of liquid-solid slip, and practical guidelines for searching new functional interfaces with optimal energy conversion properties, e.g. for blue energy or waste heat harvesting.
Interaction of motile microrganisms with a nearby solid substrate is a well studied phenomenon. However, the effects of hydrodynamic slippage on the substrate have received a little attention. In the present study, within the framework of the squirmer model, we impose a tangential velocity at the swimmer surface as a representation of the ciliatory propulsion and subsequently obtain exact solution of the Stokes equation based on a combined analytical-numerical approach. We illustrate how the near-wall swimming velocities are non-trivially altered by the interaction of wall slip and hydrodynami…
The influence of wall slip on the instability of a non-wetting liquid film placed on a solid substrate is analyzed in the limit of negligible inertia. In particular, we focus on the stability properties of the film, comparing the performance of the three lubrication models available in the literature, namely the weak, intermediate and strong slip models, with the Stokes equations. Since none of the aforementioned leading-order lubrication models is shown to be able to predict the growth rate of perturbations for the whole range of slipping lengths, we develop a parabolic model able to accurate…
Hydrogels are widely used in myriad applications including those in the biomedical and personal care fields. It is generally the rheology, i.e., the flow and deformation properties, of hydrogels that define their functionalities. However, the ubiquitous viscoplasticity and associated wall slip behavior of hydrogels handicap the accurate characterization of their rheological material functions. Here parallel-disk and cone-and-plate viscometers were used to characterize the shear viscosity and wall slip behavior of a crosslinked poly(acrylic acid), PAA, hydrogel (carbomer, specifically Carbopol)…
The ubiquitous wall slip behavior of viscoplastic fluids renders the analysis of their steady torsional flow data to determine their yield stress and other parameters of their shear viscosity material function challenging. Roughened surfaces to prevent wall slip can be used but such methods frequently result in the fracturing of the sample. Instead, it is shown here that the yield stress of a viscoplastic fluid can be determined from the torque versus apparent shear rate data of steady torsional flow using a single gap. The step change in the slope of the torque versus apparent shear rate data…
Motivated by experimental evidence of violations of the no-slip boundary condition for liquid flow in micron-scale geometries, we propose a simple, complementary experimental technique that has certain advantages over previous studies. Instead of relying on externally-induced flow or probe motion, we suggest that colloidal diffusivity near solid surfaces contains signatures of the degree of fluid slip exhibited on those surfaces. To investigate, we calculate the image system for point forces (Stokeslets) oriented perpendicular and parallel to a surface with a finite slip length, analogous to B…
The ability to predict and/or control wall slip is a fundamental problem in the hydrodynamics of yield stress fluids, which is poorly understood to date and has important applications in bio- and micro-fluidic systems. Systematic measurements of steady flows of a simple yield stress fluid (Carbopol Ultrez 10) in a plane acrylic micro-channel are used to establish rigorous scaling laws for the wall velocity gradient and the slip velocity. By means of epi-fluorescent microscopy combined with a custom developed Digital Particle Image Velocimetry (DPIV) technique, times series of velocity fields w…
The present letter explains the synergetic effect of wall-slip, compressibility, and thixotropy in a pressurized flow startup operation of various structured fluids. Opposite to the intuition, experimental and numerical simulations suggest that the wall-slip (adhesive failure) is facilitating gel degradation (cohesive failure), revealing a new flow-startup mechanism. The thixotropic rheological model includes structural degradation kinetics at the bulk. Whereas, a static slip-based model addresses the near-wall phenomenon. The near-wall transient variations in axial velocity or strain evolutio…
Using a dynamic Surface Force Apparatus, we demonstrate that the notion of slip length used to describe the boundary flow of simple liquids, is not appropriate for viscoelastic liquids. Rather, the appropriate description lies in the original Navier's partial slip boundary condition, formulated in terms of an interfacial friction coefficient. We establish an exact analytical expression to extract the interfacial friction coefficient from oscillatory drainage forces between a sphere and a plane, suitable for dynamic SFA or Atomic Force Microscopy non-contact measurements. We use this model to i…
In this article we develop a theoretical framework to study the hydrodynamic interactions in the presence of a non-flat and no-slip boundary. We calculate the influence of a small amplitude and sinusoidal deformations of a boundary wall in the self mobility and the two body hydrodynamic interactions for spherical particles. We show that the surface roughness enhances the self mobility of a sphere in a way that, for motion in front of a local hump of the surface, the mobility strength decreases while it increases for the motion above a local deep of the rough surface. The influence of the surfa…
A experimental study of low Reynolds numbers unsteady pipe flows of a yield stress shear thinning fluid (Carbopol- 980) is presented. The investigation of the solid-fluid transition in a rheometric flow in the presence and in the ab- sence of the wall slip reveals a coupling between the irreversible deformation states and the wall slip phenomenon. Particularly, the presence of wall slip nearly suppresses the scaling of the deformation power deficit associated to the rheological hysteresis with the rate at which the material is forced. The irreversible solid-fluid transition and the wall slip b…
The effect of interfacial slip on steady-state and time-periodic flows of monatomic liquids is investigated using non-equilibrium molecular dynamics simulations. The fluid phase is confined between atomically smooth rigid walls, and the fluid flows are induced by moving one of the walls. In steady shear flows, the slip length increases almost linearly with shear rate. We found that the velocity profiles in oscillatory flows are well described by the Stokes flow solution with the slip length that depends on the local shear rate. Interestingly, the rate dependence of the slip length obtained in …
We simulate a dense athermal suspension of soft particles sheared between hard walls of a prescribed roughness profile, using a method that fully accounts for the fluid mechanics of the solvent between the particles, and between the particles and the walls, as well as for the solid mechanics of changes in the particle shapes. We thus capture the widely observed phenomenon of elastohydrodynamic wall slip, in which the soft particles become deformed in shear and lift away from the wall slightly, leaving behind a thin lubricating solvent layer of high shear. For imposed stresses below the materia…
We present a comprehensive study of the slip and flow of concentrated colloidal suspensions using cone-plate rheometry and simultaneous confocal imaging. In the colloidal glass regime, for smooth, non-stick walls, the solid nature of the suspension causes a transition in the rheology from Herschel-Bulkley (HB) bulk flow behavior at large stress to a Bingham-like slip behavior at low stress, which is suppressed for sufficient colloid-wall attraction or colloid-scale wall roughness. Visualization shows how the slip-shear transition depends on gap size and the boundary conditions at both walls an…
The dynamic behavior of the slip length in a fluid flow confined between atomically smooth surfaces is investigated using molecular dynamics simulations. At weak wall-fluid interactions, the slip length increases nonlinearly with the shear rate provided that the liquid/solid interface forms incommensurable structures. A gradual transition to the linear rate-dependence is observed upon increasing the wall-fluid interaction. We found that the slip length can be well described by a function of a single variable that in turn depends on the in-plane structure factor, contact density and temperature…
Whereas our understanding of the role and mechanism of wall slip has improved substantially over the last decade or two, it is still common to see papers on disperse systems appear wherein scant details of the measurement methods are given and wherein no mention of the possibility (probability?) of slip is made. It is argued that there is a need to raise awareness. It takes experience, judgement and skill to make meaningful measurements on disperse systems and it is suspected that the nature of the experimental challenge is under-estimated grossly by too many workers even now.
Shear viscosity and wall slip of dense suspensions of a silicone polymer incorporated with polydisperse particles were investigated. Three types of particles with low aspect ratios were used to achieve a relatively high maximum packing fraction of 0.86. Such a high maximum packing fraction allowed the preparation of suspensions with a wide range of solid volume fractions in the range of 0.62 to 0.82. The wall slip velocities of the suspensions in steady torsional and capillary flows were characterized and determined to be fully consistent with the mechanism of apparent slip layer formation at …
The progressive onset of slip at the wall, which corresponds to a slip length increasing with the solicitation time before reaching a plateau, has been investigated for model viscoelastic polymer solutions, allowing one to vary the longest relaxation time while keeping constant solid - fluid interactions. A hydrodynamic model based on a Maxwell fluid and the classical Navier's hypothesis of a linear response for the friction stress at the interface fully accounts for the data, without any adjustable parameter. No viscoelastic response needs be postulated for the friction, reflecting the local …
The interplay between shear band (SB) formation and boundary conditions (BC) is investigated in wormlike micellar systems (CPyCl--NaSal) using ultrasonic velocimetry coupled to standard rheology in Couette geometry. Time-resolved velocity profiles are recorded during transient strain-controlled experiments in smooth and sand-blasted geometries. For stick BC standard SB is observed, although depending on the degree of micellar entanglement temporal fluctuations are reported in the highly sheared band. For slip BC wall slip occurs only for shear rates larger than the start of the stress plateau.…
Catalytic colloidal swimmers that propel due to self-generated fluid flows exhibit strong affinity for surfaces. We here report experimental measurements of significantly different velocities of such microswimmers in the vicinity of substrates made from different materials. We find that velocities scale with the solution contact angle $θ$ on the substrate, which in turn relates to the associated hydrodynamic substrate slip length, as $V\propto(\cosθ+1)^{-3/2}$. We show that such dependence can be attributed to osmotic coupling between swimmers and substrate. Our work points out that hydrodynam…
The shear rate dependence of the slip length in thin polymer films confined between atomically flat surfaces is investigated by molecular dynamics simulations. The polymer melt is described by the bead-spring model of linear flexible chains. We found that at low shear rates the velocity profiles acquire a pronounced curvature near the wall and the absolute value of the negative slip length is approximately equal to thickness of the viscous interfacial layer. At higher shear rates, the velocity profiles become linear and the slip length increases rapidly as a function of shear rate. The gradual…
The shear flow of a triblock copolymer micellar solution (PEO--PPO--PEO Pluronic P84 in brine) is investigated using simultaneous rheological and velocity profile measurements in the concentric cylinder geometry. We focus on two different temperatures below and above the transition temperature $T_c$ which was previously associated with the apparition of a stress plateau in the flow curve. (i) At $T=37.0^\circ$C $<T_c$, the bulk flow remains homogeneous and Newtonian-like, although significant wall slip is measured at the rotor that can be linked to an inflexion point in the flow curve. (ii) At…
We present a computer simulation study, via lattice Boltzmann simulations, of a microscopic model for cytoplasmic streaming in algal cells such as those of Chara corallina. We modelled myosin motors tracking along actin lanes as spheres undergoing directed motion along fixed lines. The sphere dimension takes into account the fact that motors drag vesicles or other organelles, and, unlike previous work, we model the boundary close to which the motors move as walls with a finite slip layer. By using realistic parameter values for actin lane and myosin density, as well as for endoplasmic and vacu…
Some fluids exhibit anomalously low friction when flowing against a certain solid wall. To recover the viscosity of a bulk fluid, slip at the wall is usually postulated. On a macroscopic level, a large slip length can be explained as a formation of a film of gas or phase-separated `lubricant' with lower viscosity between the fluid and the solid wall. Here we justify such an assumption in terms of a prewetting transition. In our model the thin-thick film transition together with the viscosity contrast gives rise to large boundary slip. The calculated value of the slip length has a jump at the p…
We image the flow of a nearly random close packed, hard-sphere colloidal suspension (a `paste') in a square capillary using confocal microscopy. The flow consists of a `plug' in the center while shear occurs localized adjacent to the channel walls, reminiscent of yield-stress fluid behavior. However, the observed scaling of the velocity profiles with the flow rate strongly contrasts yield-stress fluid predictions. Instead, the velocity profiles can be captured by a theory of stress fluctuations originally developed for chute flow of dry granular media. We verified this behavior both for smooth…
We theoretically investigate general properties of driven (sheared) colloidal suspensions in confinement, based on methods of classical density functional theory. In the absence of an exact closed (Smoluchowski-) equation for the one-particle density under shear, we formulate a set of general conditions for approximations, and show that a simple closure fulfills them. The exact microscopic stress tensor is identified. Exemplifying the situation near a wall (oriented parallel to the direction of shear), we note that the microscopic shear stress is not necessarily homogeneous. Formulating a seco…
We report on the decay of a passive scalar in chaotic mixing protocols where the wall of the vessel is rotated, or a net drift of fluid elements near the wall is induced at each period. As a result the fluid domain is divided into a central isolated chaotic region and a peripheral regular region. Scalar patterns obtained in experiments and simulations converge to a strange eigenmode and follow an exponential decay. This contrasts with previous experiments [Gouillart et al., Phys. Rev. Lett. 99, 114501 (2007)] with a chaotic region spanning the whole domain, where fixed walls constrained mixing…
Flows of suspensions are often affected by wall slip, that is the fluid velocity $v_{f}$ in the vicinity of a boundary differs from the wall velocity $v_{w}$ due to the presence of a lubrication layer. While the slip velocity $v_s=\vert v_{f}-v_{w}\vert$ robustly scales linearly with the stress $σ$ at the wall in dilute suspensions, there is no consensus regarding denser suspensions that are sheared in the bulk, for which slip velocities have been reported to scale as a $v_s\proptoσ^p$ with exponents $p$ inconsistently ranging between 0 and 2. Here we focus on a suspension of soft thermorespon…
Molecular dynamics simulations are used to investigate the influence of molecular-scale surface roughness on the slip behavior in thin liquid films. The slip length increases almost linearly with the shear rate for atomically smooth rigid walls and incommensurate structures of the liquid/solid interface. The thermal fluctuations of the wall atoms lead to an effective surface roughness, which makes the slip length weakly dependent on the shear rate. With increasing the elastic stiffness of the wall, the surface roughness smoothes out and the strong rate dependence is restored again. Both period…
We report results of direct measurements of velocity profiles in a microchannel with hydrophobic and hydrophilic walls, using a new high precision method of double-focus spacial fluorescence cross-correlation under a confocal microscope. In the vicinity of both walls the measured velocity profiles do not turn to zero by giving a plateau of constant velocity. This apparent slip is proven to be due to a Taylor dispersion, an augmented by shear diffusion of nanotracers in the direction of flow. Comparing the velocity profiles near the hydrophobic and hydrophilic walls for various conditions shows…
When wall slip wins over shear flow: A temperature-dependent Eyring slip law and a thermal multiscale model for diamond-like carbon lubricated by a polyalphaolefin oil
We have studied the slip length of confined liquid with small roughness of solid-liquid interfaces. Dyadic Green function and perturbation expansion have been applied to get the slip length quantitatively. In the slip length, both effects of the roughness of the interfaces and the chemical interaction between the liquid and the solid surface are involved. For the numerical calculation, Monte Carlo method has been used to simulate the rough interfaces and the physical quantities are obtained statistically over the interfaces. Results show that the total slip length of the system is linearly pro…
Chaotic mixing in a closed vessel is studied experimentally and numerically in different 2-D flow configurations. For a purely hyperbolic phase space, it is well-known that concentration fluctuations converge to an eigenmode of the advection-diffusion operator and decay exponentially with time. We illustrate how the unstable manifold of hyperbolic periodic points dominates the resulting persistent pattern. We show for different physical viscous flows that, in the case of a fully chaotic Poincare section, parabolic periodic points at the walls lead to slower (algebraic) decay. A persistent patt…
When a mixture of two viscous liquids flows past a solid wall there is an ambiguity in the use of the no-slip boundary condition. It is not obvious whether the mass-averaged velocity, the volume-averaged velocity, the individual species velocities, all or none of the above, or none of the above should exhibit no-slip. Extensive molecular dynamics simulations of the Poiseuille flow of mixtures of coexisting liquid species past an atomistic wall indicate that the velocity of each individual liquid species satisfies the no-slip condition and, therefore, so do mass and volume averages.
We investigate the behavior of the slip length in Newtonian liquids subject to planar shear bounded by substrates with mixed boundary conditions. The upper wall, consisting of a homogenous surface of finite or vanishing slip, moves at a constant speed parallel to a lower stationary wall, whose surface is patterned with an array of stripes representing alternating regions of no-shear and finite or no-slip. Velocity fields and effective slip lengths are computed both from molecular dynamics (MD) simulations and solution of the Stokes equation for flow configurations either parallel or perpendicu…
By means of lattice-Boltzmann simulations the drag force on a sphere of radius R approaching a superhydrophobic striped wall has been investigated as a function of arbitrary separation h. Superhydrophobic (perfect-slip vs. no-slip) stripes are characterized by a texture period L and a fraction of the gas area $ϕ$. For very large values of h/R we recover the macroscopic formulae for a sphere moving towards a hydrophilic no-slip plane. For h/R=O(1) and smaller the drag force is smaller than predicted by classical theories for hydrophilic no-slip surfaces, but larger than expected for a sphere in…
The Navier boundary condition for velocity slip on flat surfaces, when expressed in tensor form, is readily extended to surfaces of any shape. We test this assertion using molecular dynamics simulations of flow in channels with flat and curved walls and for rotating cylinders and spheres, all for a wide range of solid-liquid interaction strengths. We find that the slip length as conventionally measured at a flat wall in Couette flow is the same as that for all other cases with curved and rotating boundaries, provided the atomic interactions are the same and boundary shape is properly taken int…
The motion of soft-glassy materials (SGM) in a confined geometry is strongly impacted by surface roughness. However, the effect of the spatial distribution of the roughness remains poorly understood from a more quantitative viewpoint. Here we present a comprehensive study of concentrated emulsions flowing in microfluidic channels, one wall of which is patterned with micron-size equally spaced grooves oriented perpendicularly to the flow direction. We show that roughness-induced fluidization can be quantitatively tailored by systematically changing both the width and separation of the grooves. …
Molecular dynamics simulations are carried out to investigate the dynamic behavior of the slip length in thin polymer films confined between atomically smooth thermal surfaces. For weak wall-fluid interactions, the shear rate dependence of the slip length acquires a distinct local minimum followed by a rapid growth at higher shear rates. With increasing fluid density, the position of the local minimum is shifted to lower shear rates. We found that the ratio of the shear viscosity to the slip length, which defines the friction coefficient at the liquid/solid interface, undergoes a transition fr…
An experimental study of flows of the green non-motile Chlorella micro-alga in a plane microchannel is presented. Depending on the value of the cell volume fraction, three distinct flow regimes are observed. For low values of the cell volume fraction a Newtonian flow regime characterised by a Poiseuille like flow field, absence of wall slip and hydrodynamic reversibility of the flow states is observed. For intermediate values of the cell volume fraction, the flow profiles are consistent with a Poiseuille flow of a shear thinning fluid in the presence of slip at the channel's wall. For even lar…
We performed non-equilibrium Molecular Dynamics simulations of water flow in nano-channels with the aim of discriminating {\it static} from {\it dynamic} contributions of the solid surface to the slip length of the molecular flow. We show that the regularization of the slip length divergence at high shear rates, formerly attributed to the wall dynamics, is controlled instead by its static properties. Surprisingly, we find that atomic displacements at the Angstrom scale are sufficient to remove the divergence of the slip length and realize the no-slip condition. Since surface thermal fluctuatio…
The molecular mechanism of slip at the interface between polymer melts and weakly attractive smooth surfaces is investigated using molecular dynamics simulations. In agreement with our previous studies on slip flow of shear-thinning fluids, it is shown that the slip length passes through a local minimum at low shear rates and then increases rapidly at higher shear rates. We found that at sufficiently high shear rates, the slip flow over atomically flat crystalline surfaces is anisotropic. It is demonstrated numerically that the friction coefficient at the liquid-solid interface (the ratio of v…
Boundary shape, particularly roughness, strongly controls the amount of wall slip in dense granular flows. In this paper, we aim to quantify and understand which aspects of a dense granular flow are controlled by the boundary condition, and to incorporate these observations into a cooperative nonlocal model characterizing slow granular flows. To examine the influence of boundary properties, we perform experiments on a quasi-2D annular shear cell with a rotating inner wall and a fixed outer wall; the later is selected from among 6 walls with various roughness, local concavity, and compliance. W…
In this paper we report a novel inertial instability that occurs in electro-osmotically driven channel flows. We assume that the charge motion under the influence of an externally applied electric field is confined to a small vicinity of the channel walls that, effectively, drives a bulk flow through a prescribed slip velocity at the boundaries. Here, we study spatially-periodic wall velocity modulations in a two-dimensional straight channel numerically. At low slip velocities, the bulk flow consists of a set of vortices along each wall that are left-right symmetric, while at sufficiently high…
Measuring yielding in cohesive suspensions is often hampered by slip at measurement surfaces. This paper presents creep data for strongly-flocculated suspensions obtained using vane-in-cup tools with differing cup-to-vane diameter ratios. The three suspensions were titania and alumina aggregated at their isoelectric points and polymer-flocculated alumina. The aim was to find the diameter ratio where slip or premature yielding at the cup wall had no effect on the transient behaviour. The large diameter ratio results showed readily understandable material behaviour comprising linear viscoelastic…
We consider an elastic composite material containing particulate inclusions in a soft elastic matrix that is bounded by a rigid wall, e.g., the substrate. If such a composite serves as a soft actuator, forces are imposed on or induced between the embedded particles. We investigate how the presence of the rigid wall affects the interactions between the inclusions in the elastic matrix. For no-slip boundary conditions, we transfer Blake's derivation of a corresponding Green's function from low-Reynolds-number hydrodynamics to the linearly elastic case. Results for no-slip and free-slip surface c…
This article discusses the way the standard description of capillary filling dynamics has to be modified to account for liquid/solid slip in nanometric pores. It focuses in particular on the case of a large slip length compared to the pore size. It is shown that the liquid viscosity does not play a role, and that the flow is only controlled by the friction coefficient of the liquid at the wall. Moreover in the Washburn regime, the filling velocity does not depend on the tube radius. Finally, molecular dynamics simulations suggest that this standard description fails to describe the early stage…
The effect of temperature on friction and slip at the liquid-solid interface has attracted attention over the last twenty years, both numerically and experimentally. However, the role of temperature on slip close to the glass transition has been less explored. Here, we use molecular dynamics to simulate a bi-disperse atomic fluid, which can remain liquid below its melting point (supercooled state), to study the effect of temperature on friction and slip length between the liquid and a smooth apolar wall, in a broad range of temperatures. At high temperatures, an Arrhenius law fits well the tem…
Based on the capillary pore model (space-charge theory) for combined fluid and ion flow through cylindrical nanopores or nanotubes, we derive the continuum equations modified to include wall slip. We focus on the ionic conductance and streaming conductance, cross-coefficients of relevance for electrokinetic energy conversion and electro-osmotic pumping. We combine the theory with a Langmuir-Stern 1-pK charge regulation boundary condition resulting in a non-monotonic dependence of the cross-coefficients on salt concentration.
A type of super-hydrophobic surface consists of a solid plane boundary with an array of grooves which, due to the effect of surface tension, prevent a complete wetting of the wall. The effect is greatest when the grooves are aligned with the flow. The pressure difference between the liquid and the gas in the grooves causes a curvature of the liquid surface resisted by surface tension. The effects of this surface deformation are studied in this paper. The corrections to the effective slip length produced by the curvature are analyzed theoretically and a comparison with available data and relate…
