We consider a wireless communication system that consists of a transmitter, a receiver, and an adversary. The transmitter transmits signals with different modulation types, while the receiver classifies its received signals to modulation types using a deep learning-based classifier. In the meantime, the adversary makes over-the-air transmissions that are received as superimposed with the transmitter's signals to fool the classifier at the receiver into making errors. While this evasion attack has received growing interest recently, the channel effects from the adversary to the receiver have been ignored so far such that the previous attack mechanisms cannot be applied under realistic channel effects. In this paper, we present how to launch a realistic evasion attack by considering channels from the adversary to the receiver. Our results show that modulation classification is vulnerable to an adversarial attack over a wireless channel that is modeled as Rayleigh fading with path loss and shadowing. We present various adversarial attacks with respect to availability of information about channel, transmitter input, and classifier architecture. First, we present two types of adversarial attacks, namely a targeted attack (with minimum power) and non-targeted attack that aims to change the classification to a target label or to any other label other than the true label, respectively. Both are white-box attacks that are transmitter input-specific and use channel information. Then we introduce an algorithm to generate adversarial attacks using limited channel information where the adversary only knows the channel distribution. Finally, we present a black-box universal adversarial perturbation (UAP) attack where the adversary has limited knowledge about both channel and transmitter input.
Blockchain has been deemed as a promising solution for providing security and privacy protection in the next-generation wireless networks. Large-scale concurrent access for massive wireless devices to accomplish the consensus procedure may consume prohibitive communication and computing resources, and thus may limit the application of blockchain in wireless conditions. As most existing consensus protocols are designed for wired networks, directly apply them for wireless users may exhaust their scarce spectrum and computing resources. In this paper, we propose AirCon, a byzantine fault-tolerant…
Over-the-air computation (AirComp) is a known technique in which wireless devices transmit values by analog amplitude modulation so that a function of these values is computed over the communication channel at a common receiver. The physical reason is the superposition properties of the electromagnetic waves, which naturally return sums of analog values. Consequently, the applications of AirComp are almost entirely restricted to analog communication systems. However, the use of digital communications for over-the-air computations would have several benefits, such as error correction, synchroni…
In this paper, we consider the problem of wireless federated learning based on sign stochastic gradient descent (signSGD) algorithm via a multiple access channel. When sending locally computed gradient's sign information, each mobile device requires to apply precoding to circumvent wireless fading effects. In practice, however, acquiring perfect knowledge of channel state information (CSI) at all mobile devices is infeasible. In this paper, we present a simple yet effective precoding method with limited channel knowledge, called sign-alignment precoding. The idea of sign-alignment precoding is…
By serving as an analog to traffic signal lights, communication signaling for drone to drone communications holds the key to the success of advanced air mobility (AAM) in both urban and rural settings. Deployment of AAM applications such as air taxis and air ambulances, especially at large-scale, requires a reliable channel for a point-to-point and broadcast communication between two or more aircraft. Achieving such high reliability, in a highly mobile environment, requires communication systems designed for agility and efficiency. This paper presents the foundations for establishing and maint…
This paper shows that, when considering outdoor scenarios and wireless communications using the IEEE 802.11 protocol with dipole antennas, the ground reflection is a significant propagation mechanism. This way, the Two-Ray model for this environment allows predicting, with some accuracy, the received signal power. This study is relevant for the application in the communication between overflying Unmanned Aerial Vehicles (UAVs) and ground sensors. In the proposed Wireless Sensor Network (WSN) scenario, the UAVs must receive information from the environment, which is collected by sensors positio…
Over-the-air federated learning (OTA-FL) has emerged as an efficient mechanism that exploits the superposition property of the wireless medium and performs model aggregation for federated learning in the air. OTA-FL is naturally sensitive to wireless channel fading, which could significantly diminish its learning accuracy. To address this challenge, in this paper, we propose an OTA-FL algorithm called CHARLES (channel-quality-aware over-the-air local estimating and scaling). Our CHARLES algorithm performs channel state information (CSI) estimation and adaptive scaling to mitigate the impacts o…
Wireless data aggregation (WDA), referring to aggregating data distributed at devices (e.g., sensors and smartphone), is a common operation in 5G-and-beyond machine-type communications to support Internet-of-Things (IoT), which lays the foundation for diversified applications such as distributed sensing, learning, and control. Conventional WDA techniques that are designed based on a separated-communication-and-computation principle encounter difficulty in accommodating the massive access under the limited radio resource and stringent latency constraints imposed by emerging applications (e.g, a…
Intelligent reflecting surface (IRS) and unmanned aerial vehicle (UAV) have emerged as two promising technologies to boost the performance of wireless communication networks, by proactively altering the wireless communication channels via smart signal reflection and maneuver control, respectively. However, they face different limitations in practice, which restrain their future applications. In this article, we propose new methods to jointly apply IRS and UAV in integrated air-ground wireless networks by exploiting their complementary advantages. Specifically, terrestrial IRS is used to enhanc…
Orthogonal time frequency space (OTFS) modulation is a recently proposed multi-carrier transmission scheme, which innovatively multiplexes the information symbols in the delay-Doppler (DD) domain instead of the conventional time-frequency (TF) domain. The DD domain symbol multiplexing gives rise to a direct interaction between the DD domain information symbols and DD domain channel responses, which are usually quasi-static, compact, separable, and potentially sparse. Therefore, OTFS modulation enjoys appealing advantages over the conventional orthogonal frequency-division multiplexing (OFDM) m…
Virginia Tech（弗吉尼亚理工大学）；University of Colorado（科罗拉多大学）；University of Oulu（奥卢大学）
To meet the growing mobility needs in intra-city transportation, the concept of urban air mobility (UAM) has been proposed in which vertical takeoff and landing (VTOL) aircraft are used to provide a ride-hailing service. In UAM, aircraft can operate in designated air spaces known as corridors, that link the aerodromes. A reliable communication network between GBSs and aircraft enables UAM to adequately utilize the airspace and create a fast, efficient, and safe transportation system. In this paper, to characterize the wireless connectivity performance for UAM, a spatial model is proposed. For …
Distributed power allocation is important for interference-limited wireless networks with dense transceiver pairs. In this paper, we aim to design low signaling overhead distributed power allocation schemes by using graph neural networks (GNNs), which are scalable to the number of wireless links. We first apply the message passing neural network (MPNN), a unified framework of GNN, to solve the problem. We show that the signaling overhead grows quadratically as the network size increases. Inspired from the over-the-air computation (AirComp), we then propose an Air-MPNN framework, where the mess…
Motivated by increasing computational capabilities of wireless devices, as well as unprecedented levels of user- and device-generated data, new distributed machine learning (ML) methods have emerged. In the wireless community, Federated Learning (FL) is of particular interest due to its communication efficiency and its ability to deal with the problem of non-IID data. FL training can be accelerated by a wireless communication method called Over-the-Air Computation (AirComp) which harnesses the interference of simultaneous uplink transmissions to efficiently aggregate model updates. However, si…
This paper presents how to leak private information from a wireless signal classifier by launching an over-the-air membership inference attack (MIA). As machine learning (ML) algorithms are used to process wireless signals to make decisions such as PHY-layer authentication, the training data characteristics (e.g., device-level information) and the environment conditions (e.g., channel information) under which the data is collected may leak to the ML model. As a privacy threat, the adversary can use this leaked information to exploit vulnerabilities of the ML model following an adversarial ML a…
We propose a low-cost reconfigurable metasurface transmitter to implement generalized polarization-space modulation (GPSM) that has been proposed for next-generation wireless communications. Unlike conventional multiple-input multiple-output GPSM, our electromagnetically-compliant, reduced form-factor design using Barium-Strontium-Titanate film yields more than two polarization states. Full-wave simulations show our optimized design achieves 0.08-0.95 polarization conversion ratio with 5% bandwidth at 28 GHz and bit error rates comparable or better than conventional systems.
Automatic modulation classification is of crucial importance in wireless communication networks. Deep learning based automatic modulation classification schemes have attracted extensive attention due to the superior accuracy. However, the data-driven method relies on a large amount of training samples and the classification accuracy is poor in the low signal-to-noise radio (SNR). In order to tackle these problems, a novel data-and-knowledge dual-driven automatic modulation classification scheme based on radio frequency machine learning is proposed by exploiting the attribute features of differ…
A Kerr microresonator frequency comb has enabled the generation of low-phase-noise millimeter- and terahertz-waves in conjunction with an ultrafast photodiode. It is intriguing to employ the new light source in wireless communication at above 100 GHz band, where a carrier signal with a high signal-to-noise ratio is desired to achieve higher data rates. In this study, we demonstrate two simple and efficient architectures of wireless links based on a microresonator comb. We show experimentally that simultaneous modulation and detection of multiple comb lines result in >10 times stronger modulati…
Adaptive modulation and coding (AMC) is widely employed in modern wireless communication systems to improve the transmission efficiency by adjusting the transmission rate according to the channel conditions. Thus, AMC can provide very efficient use of channel resources especially over fading channels. Quadrature Amplitude Modulation (QAM) is an ef- ficient and widely employed digital modulation technique. It typically employs a rectangular signal constellation. Therefore the decision regions of the constellation are square partitions of the two-dimensional signal space. However, it is well kno…
Capillary wireless sensor networks devoted to air quality monitoring have provided vital information on dangerous air conditions. In adopting the environmentally generated energy as the fundamental energy source the main challenge is the implementation of capillary networks rather than replacing the batteries on a set period of times that leads to functional dilemma of devices management and high costs. In this paper we present a battery-less, self-governing, multi-parametric sensing platform for air quality monitoring that harvests environment energy for long run. Furthermore study on sensor …
Index modulation (IM) is one of the candidate technologies for the upcoming sixth generation (6G) wireless communications networks. In this paper, we propose a space-time-modulated reconfigurable intelligent metasurface (RI-MTS) that is configured to implement various frequency-domain IM techniques in a multiple-input multiple-output (MIMO) array configuration. Unlike prior works which mostly analyze signal theory of general RI-MTS IM, we present novel electromagnetics-compliant designs of specific IMs such as sub-carrier index modulation (SIM) and MIMO orthogonal frequency-domain modulation I…
In this paper we are interested to learn from a wireless digitally modulated signal the number of antennas that the transmitter (Tx) of this signal uses, as well as its specific modulation scheme (from phase-shift keying (PSK) or quadrature amplitude modulation (QAM)). Formally, these are modulation and antenna classification problems. We examine the problems with data-driven machine learning (ML)-based techniques. The two sub-problems of modulation and number of transmitter antenna classification are initially examined independently for a variety for system parameters, namely the SNR, number …
ShanghaiTech University（上海科技大学）；Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences（中国科学院上海微系统与信息技术研究所）；University of Chinese Academy of Sciences（中国科学院大学）；University of Waterloo（滑铁卢大学）
Federated learning (FL) over resource-constrained wireless networks has recently attracted much attention. However, most existing studies consider one FL task in single-cell wireless networks and ignore the impact of downlink/uplink inter-cell interference on the learning performance. In this paper, we investigate FL over a multi-cell wireless network, where each cell performs a different FL task and over-the-air computation (AirComp) is adopted to enable fast uplink gradient aggregation. We conduct convergence analysis of AirComp-assisted FL systems, taking into account the inter-cell interfe…
ShanghaiTech University（上海科技大学）；Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences（中国科学院上海微系统与信息技术研究所）；University of Chinese Academy of Sciences（中国科学院大学）
In this paper, we consider decentralized federated learning (FL) over wireless networks, where over-the-air computation (AirComp) is adopted to facilitate the local model consensus in a device-to-device (D2D) communication manner. However, the AirComp-based consensus phase brings the additive noise in each algorithm iterate and the consensus needs to be robust to wireless network topology changes, which introduce a coupled and novel challenge of establishing the convergence for wireless decentralized FL algorithm. To facilitate consensus phase, we propose an AirComp-based DSGD with gradient tr…
Using artificial intelligent (AI) to re-design and enhance the current wireless communication system is a promising pathway for the future sixth-generation (6G) wireless network. The performance of AI-enabled wireless communication depends heavily on the quality of wireless air-interface data. Although there are various approaches to data quality assessment (DQA) for different applications, none has been designed for wireless air-interface data. In this paper, we propose a DQA framework to measure the quality of wireless air-interface data from three aspects: similarity, diversity, and complet…
In this communication, we propose a framework for amalgamating optical-orthogonal frequency-division multiplexing (O-OFDM) and O-OFDM with index modulation (O-OFDM-IM) for optical wireless systems. Both schemes individually have some limitations, e.g., O-OFDM does not provide any granularity for spectral efficiency (SE)/energy efficiency (EE) trade-off, and O-OFDM-IM loses EE for higher order modulation alphabets. By combining O-OFDM and O-OFDM-IM together, the above limitations can be circumvented. Following on from providing the general framework, we use asymmetrically clipped (AC)O-OFDM and…
The explosion of the number of low-power devices in the next decades calls for a re-thinking of wireless network design, namely, unifying wireless transmission of information and power so as to make the best use of the RF spectrum, radiation, and infrastructure for the dual purpose of communicating and energizing. This paper provides a novel learning-based approach towards such wireless network design. To that end, a parametric model of a practical energy harvester, accounting for various sources of nonlinearities, is proposed using a nonlinear regression algorithm applied over collected real …
In this paper, we propose downlink signal design and optimal uplink scheduling for the wireless powered communication networks (WPCNs). Prior works give attention to resource allocation in a static channel because users are equipped with only energy receiver and users cannot update varying uplink schedulling. For uplink scheduling, we propose a downlink signal design scheme, called a power level modulation, which conveys uplink scheduling information to users. First, we design a downlink energy signal using power level modulation. Hybrid-access point (H-AP) allocates different power level in e…
The quick detection and localization of partial discharge (PD) in an air-insulated substation (AIS) based on ultrahigh-frequency (UHF) sensor arrays are efficient for power equipment monitoring. The adopted UHF PD time difference of arrival (TDOA) methods mainly use the time difference of electromagnetic wave signals. Thus, the system requires both a high sampling rate and time synchronization accuracy, leading to a high cost and large size. In this study, the feasibility and accuracy of PD DOA in an AIS were investigated using a UHF wireless sensor array and the received signal strength indic…
The emerging millimeter-wave (mm-wave) unmanned aerial vehicle (UAV) air-to-ground (A2G) communications are facing the Doppler effect problem that arises from the inevitable wobbling of the UAV. The fast time-varying channel for UAV A2G communications may lead to the outdated channel state information (CSI) from the channel estimation. In this paper, we introduce two detectors to demodulate the received signal and get the instantaneous bit error probability (BEP) of a mm-wave UAV A2G link under imperfect CSI. Based on the designed detectors, we propose an adaptive modulation scheme to maximize…
Supervised learning in machine learning (ML) requires labelled data set. Further real-time data classification requires an easily available methodology for labelling. Wireless modulation and signal classification find their application in plenty of areas such as military, commercial and electronic reconaissance and cognitive radio. This paper mainly aims to solve the problem of real-time wireless modulation and signal class labelling with an active learning framework. Further modulation and signal classification is performed with machine learning algorithms such as KNN, SVM, Naive bayes. Activ…
Future communication networks must address the scarce spectrum to accommodate extensive growth of heterogeneous wireless devices. Wireless signal recognition is becoming increasingly more significant for spectrum monitoring, spectrum management, secure communications, among others. Consequently, comprehensive spectrum awareness on the edge has the potential to serve as a key enabler for the emerging beyond 5G networks. State-of-the-art studies in this domain have (i) only focused on a single task - modulation or signal (protocol) classification - which in many cases is insufficient information…
In this paper, a highly-efficient single-switch-regulated resonant wireless power receiver with hybrid modulation is proposed. To achieve both high efficiency and good output voltage regulation, phase shift and pulse width hybrid modulation are simultaneously applied. The soft switching operation in this topology is achieved by the cycle-by-cycle phase shift adjustment between the input current and the gate drive signal and also attributed to the reactive components such as the series-compensated secondary coil and the parasitic capacitor of the active switch . The soft switching operation als…
AIRMap: AI-Generated Radio Maps for Wireless Digital Twins
VIAVI Solutions, Inc.（VIAVI解决方案公司）；National Telecommunications and Information Administration (NTIA)（国家电信与信息管理局）；U.S. National Science Foundation（美国国家科学基金会）
提出AIRMap深度学习框架，基于2D高程图通过U-Net自编码器实现超快速无线电地图估计，在4毫秒内达到低于4 dB RMSE的路径增益预测，比GPU加速射线追踪快100倍以上。
